The following configuration line was added to router R1 Access－list 101 permit ip 10.25.30.0 0.0.0.255 any What is the effect of this access list configuration?() A. permit all packets matching the first three octets of the source address to all destinationsB. permit all packet matching the last octet of the destination address and accept all source addressesC. permit all packet matching the host bits in the source address to all destinationsD. permit all packet from the third subnet of the network address to all destinations
The following configuration line was added to router R1 Access－list 101 permit ip 10.25.30.0 0.0.0.255 any What is the effect of this access list configuration?()
A. permit all packets matching the first three octets of the source address to all destinations
B. permit all packet matching the last octet of the destination address and accept all source addresses
C. permit all packet matching the host bits in the source address to all destinations
D. permit all packet from the third subnet of the network address to all destinations
相关考题：
定义一个用于封禁ICMP协议而只允许转发166.129.130.0/24子网的ICMP数据包的访问控制列表，Cisco路由器的正确配置是A．access-list 198 permit icmp 166.129.130.0 255.255.255.0 any access-list 198 deny icmp any any access-list 198 permit ip any anyB．access-list 198 permit icmp 166.129.130.0 0.0.0.255 any access-list 198 deny icmp any any access-list 198 permit ip any anyC．access-list 99 permit icmp 166.129.130:0 0.0.0.255 any access-list 99 deny icnip any any access-list 99 permit ip any anyD．access-list 100 permit icmp 166.129.130.0 0.0.0.255 any access-list 100 permit ip any any access-list 100 deny icmp any any
若要求路由器的某接口上只封禁ICMP协议，但允许159.67.183.0/24子网的ICMP数据包通过，那么使用的access-list命令是______。A．access-list 120 deny icmp 159.67.183.0 0.0.0.255 any access-list 120 permit ip any anyB．access-list 10 permit icmp 159.67.183.0 0.0.0.255 any access-list 10 deny icmp any any access-list 10 permit ip any anyC．access-list 99 permit icmp 159.67.183.0 0.0.0.255 any access-list 99 deny icmp any anyD．access-list 110 permit icmp 159.67.183.0 0.0.0.255 any access-list 110 deny icmp any any access-list 110 permit ip any any
封禁ICMP协议，只转发212.78.170.166/27所在子网的所有站点的ICMP数据包，正确的access-list配置是______。A) Router(config)#access-list 110 permit icmp 212.78.170.166 0.0.0.0 anyRouter(config)#access-list 110 deny icmp any anyRouter(config)#access-list 110 permit ip any anyB) Router(config)#access-list 110 permit icmp 212.78.170.0 255.255.255.224 anyRouter(config)#access-list 110 permit ip any anyRouter(config)#access-list 110 deny icmp any anyC) Router(config)#access-list 110 perimt iemp 212.78.170.0 0.0.0.255 anyRouter(config)#access-list 110 deny icmp any anyRouter(config)#access-list 110 permit ip any anyD) Router(config)#access-list 110 permit icmp 212.78.170.160 0.0.0.31 anyRouter(config)#access-list 110 deny icmp any anyRouter(config)#access-list 110 permit ip any anyA．B．C．D．
On a newly installed router, the following access list is added to the HSSI interface for incoming traffic:Access-list 101 permit tcp any 10.18.10.0 0.0.0.255 eq tcpWhat is the effect of the any keyword in the above access list?（）A. check any of the bits in the source addressB. permit any wildcard mask for the addressC. accept any source addressD. check any bit in the destination addressE. permit 255.255.255.255 0.0.0.0F. accept any destination
The following configuration line was added to router R1 Access－list 101 permit ip 10.25.30.00.0.0.255 any What is the effect of this access list configuration?() A.ermit all packet smatching the first three octets of the source address to all destinationsB.permit all packet matching the last octet of the destination address and accept all source addressesC.permit all packet matching the host bits in the source address to all destinationsD.permit all packet from the third subnet of the network address to all destinations
A network administrator wants to add a line to an access list that will block only Telnet access by the hosts on subnet 192.168.1.128/28 to the server at 192.168.1.5. What command should be issued to accomplish this task?（）A.access-list 101 deny tcp 192.168.1.128 0.0.0.15 192.168.1.5 0.0.0.0 eq 23 access-list 101 permit ip any anyB.access-list 101 deny tcp 192.168.1.128 0.0.0.240 192.168.1.5 0.0.0.0 eq 23 access-list 101 permit ip any anyC.access-list 1 deny tcp 192.168.1.128 0.0.0.255 192.168.1.5 0.0.0.0 eq 21 access-list 1 permit ip any anyD.access-list 1 deny tcp 192.168.1.128 0.0.0.15 host 192.168.1.5 eq 23 access-list 1 permit ip any any
The following configuration line was added to router R1Access－list 101 permit ip 10.25.30.00.0.0.255 anyWhat is the effect of this access list configuration?() A.ermit all packets matching the first three octets of the source address to all destinationsB.permit all packet matching the last octet of the destination address and accept all source addressesC.permit all packet matching the host bits in the source address to all destinationsD.permit all packet from the third subnet of the network address to all destinations
What is the effect of the following access list condition access－list 101 permit ip 10.25.30.0 0.0.0.255 any()。 A.permit all packets matching the first three octets of the source address to all destinationsB.permit all packets matching the last octet of the destination address and accept all source addressesC.permit all packets from the third subnet of the network address to all destinationsD.permit all packets matching the host bits in the source address to all destinationsE.permit all packets to destinations matching the first three octets in the destination address
仅允许HTTP流量进入网络196.15.7.0，下面命令错误的是（）。A、access-list 100 permit tcp any 196.15.7.0 0.0.0.255 eq wwwB、access-list 10 deny tcp any 196.15.7.0 eq wwwC、access-list 100 permit 196.15.7.0 0.0.0.255 eq wwwD、access-list 110 permit ip any 196.15.7.0 0.0.0.255E、access-list 110 permit www 196.15.7.0 0.0.0.255
The following configuration line was added to router R1 Access-list 101 permit ip 10.25.30.00.0.0.255 any What is the effect of this access list configuration?（）A、ermit all packet smatching the first three octets of the source address to all destinationsB、permit all packet matching the last octet of the destination address and accept all source addressesC、permit all packet matching the host bits in the source address to all destinationsD、permit all packet from the third subnet of the network address to all destinations
The following configuration line was added to router R1 Access-list 101 permit ip 10.25.30.00.0.0.255 any What is the effect of this access list configuration？（）A、ermit all packets matching the first three octets of the source address to all destinationsB、permit all packet matching the last octet of the destination address and accept all source addressesC、permit all packet matching the host bits in the source address to all destinationsD、permit all packet from the third subnet of the network address to all destinations
On a newly installed router, the following access list is added to the HSSI interface for incoming traffic:Access-list 101 permit tcp any 10.18.10.0 0.0.0.255 eq tcp What is the effect of the "any" keyword in the above access list?（）A、check any of the bits in the source addressB、permit any wildcard mask for the addressC、accept any source addressD、check any bit in the destination addressE、permit 255.255.255.255 0.0.0.0F、accept any destination
A network administrator wants to add a line to an access list that will block only Telnet access by the hosts on subnet 192.168.1.128/28 to the server at 192.168.1.5. What command should be issued to accomplish this task?（）A、access-list 101 deny tcp 192.168.1.128 0.0.015 192.168.1.5 0.0.0.0 eq 23 access-list 101 permit ip any anyB、access-list 1 deny tcp 192.168.1.128 0.0.0.15 host 192.168.1.5 eq 23 access-list 1 permit ip any anyC、access-list 1 deny tcp 192.168.1.128 0.0.0.255 192.168.1.5 0.0.0.0 eq 21 access-list 1 permit ip any anyD、access-list 101 deny tcp 192.168.1.128 0.0.0.240 192.168.1.5 0.0.0.0 eq 23 access-list 101 permit ip any anyE、access-list 101 deny ip 192.168.1.128 0.0.0.240 192.158.1.5 0.0.0.0 eq 23 access-list 101 permit ip any anyF、access-list 101 deny ip 192.168.1.128 0.0.0.15 192.168.1.5 0.0.0.0 eq 23 access-list 101 permit ip any any
The following configuration line was added to router R1 Access-list 101 permit ip 10.25.30.0 0.0.0.255 any What is the effect of this access list configuration?（）A、ermit all packets matching the first three octets of the source address to all destinationsB、permit all packet matching the last octet of the destination address and accept all source addressesC、permit all packet matching the host bits in the source address to all destinationsD、permit all packet from the third subnet of the network address to all destinations
A network administrator wants to add a line to an access list that will block only Telnet access by the hosts on subnet 192.168.1.128/28 to the server at 192.168.1.5.What command should be issued to accomplish this task？（）A、access-list 101 deny tcp192.168.1.1280.0.0.15192.168.1.50.0.0.0eq23 access-list 101 permit ip any anyB、access-list 101 deny tcp192.168.1.1280.0.0.240192.168.1.50.0.0.0eq23 access-list101permit ip any anyC、access-list 1 deny tcp192.168.1.1280.0.0.255192.168.1.50.0.0.0eq21 access-list1permit ip any anyD、access-list 1 deny tcp192.168.1.1280.0.0.15host192.168.1.5eq23 access-list1permit ip any any
哪个选项代表了标准的IP ACL？（）A、 access-list 50 deny 192.168.1.1 0.0.0.255B、 access-list 110 permit ip any anyC、 access-list 2500 deny tcp any host 192.168.1.1 eq 22D、 access-list 101 deny tcp any host 192.168.1.1
Which item represents the standard IP ACL?（）A、access-list 50 deny 192.168.1.1 0.0.0.255B、access-list 110 permit ip any anyC、access-list 2500 deny tcp any host 192.168.1.1 eq 22D、access-list 101 deny tcp any host 192.168.1.1
The following configuration line was added to router R1 Access-list 101 permit ip 10.25.30.0 0.0.0.255 any What is the effect of this access list configuration?（）A、permit all packets matching the first three octets of the source address to all destinationsB、permit all packet matching the last octet of the destination address and accept all source addressesC、permit all packet matching the host bits in the source address to all destinationsD、permit all packet from the third subnet of the network address to all destinations
What is the effect of the following access list condition access-list 101 permit ip 10.25.30.0 0.0.0.255 any（）。A、permit all packets matching the first three octets of the source address to all destinationsB、permit all packets matching the last octet of the destination address and accept all source addressesC、permit all packets from the third subnet of the network address to all destinationsD、permit all packets matching the host bits in the source address to all destinationsE、permit all packets to destinations matching the first three octets in the destination address
A network administrator wants to add a line to an access list that will block only Telnet access by the hosts on subnet 192.168.1.128/28 to the server at 192.168.1.5. What command should be issued to accomplish this task?（）A、access-list 101 deny tcp 192.168.1.128 0.0.0.15 192.168.1.5 0.0.0.0 eq 23 access-list 101 permit ip any anyB、access-list 101 deny tcp 192.168.1.128 0.0.0.240 192.168.1.5 0.0.0.0 eq 23 access-list 101 permit ip any anyC、access-list 1 deny tcp 192.168.1.128 0.0.0.255 192.168.1.5 0.0.0.0 eq 21 access-list 1 permit ip any anyD、access-list 1 deny tcp 192.168.1.128 0.0.0.15 host 192.168.1.5 eq 23 access-list 1 permit ip any any
单选题The following configuration line was added to router R1 Access-list 101 permit ip 10.25.30.00.0.0.255 any What is the effect of this access list configuration?（）Aermit all packet smatching the first three octets of the source address to all destinationsBpermit all packet matching the last octet of the destination address and accept all source addressesCpermit all packet matching the host bits in the source address to all destinationsDpermit all packet from the third subnet of the network address to all destinations
单选题What is the effect of the following access list condition? access-list 101 permit ip 10.25.30.0 0.0.0.255 any（）。Apermit all packets matching the first three octets of the source address to all destinationsBpermit all packets matching the last octet of the destination address and accept all source addressesCpermit all packets from the third subnet of the network address to all destinationsDpermit all packets matching the host bits in the source address to all destinationsEpermit all packets to destinations matching the first three octets in the destination address
单选题The following configuration line was added to router R1 Access-list 101 permit ip 10.25.30.00.0.0.255 any What is the effect of this access list configuration？（）Aermit all packets matching the first three octets of the source address to all destinationsBpermit all packet matching the last octet of the destination address and accept all source addressesCpermit all packet matching the host bits in the source address to all destinationsDpermit all packet from the third subnet of the network address to all destinations
单选题On a newly installed router, the following access list is added to the HSSI interface for incoming traffic:Access-list 101 permit tcp any 10.18.10.0 0.0.0.255 eq tcp What is the effect of the "any" keyword in the above access list?（）Acheck any of the bits in the source addressBpermit any wildcard mask for the addressCaccept any source addressDcheck any bit in the destination addressEpermit 255.255.255.255 0.0.0.0Faccept any destination
单选题A network administrator wants to add a line to an access list that will block only Telnet access by the hosts on subnet 192.168.1.128/28 to the server at 192.168.1.5. What command should be issued to accomplish this task?（）Aaccess-list 101 deny tcp 192.168.1.128 0.0.0.15 192.168.1.5 0.0.0.0 eq 23 access-list 101 permit ip any anyBaccess-list 101 deny tcp 192.168.1.128 0.0.0.240 192.168.1.5 0.0.0.0 eq 23 access-list 101 permit ip any anyCaccess-list 1 deny tcp 192.168.1.128 0.0.0.255 192.168.1.5 0.0.0.0 eq 21 access-list 1 permit ip any anyDaccess-list 1 deny tcp 192.168.1.128 0.0.0.15 host 192.168.1.5 eq 23 access-list 1 permit ip any any
单选题A network administrator wants to add a line to an access list that will block only Telnet access by the hosts on subnet 192.168.1.128/28 to the server at 192.168.1.5. What command should be issued to accomplish this task?（）Aaccess-list 101 deny tcp 192.168.1.128 0.0.015 192.168.1.5 0.0.0.0 eq 23 access-list 101 permit ip any anyBaccess-list 1 deny tcp 192.168.1.128 0.0.0.15 host 192.168.1.5 eq 23 access-list 1 permit ip any anyCaccess-list 1 deny tcp 192.168.1.128 0.0.0.255 192.168.1.5 0.0.0.0 eq 21 access-list 1 permit ip any anyDaccess-list 101 deny tcp 192.168.1.128 0.0.0.240 192.168.1.5 0.0.0.0 eq 23 access-list 101 permit ip any anyEaccess-list 101 deny ip 192.168.1.128 0.0.0.240 192.158.1.5 0.0.0.0 eq 23 access-list 101 permit ip any anyFaccess-list 101 deny ip 192.168.1.128 0.0.0.15 192.168.1.5 0.0.0.0 eq 23 access-list 101 permit ip any any
单选题The following configuration line was added to router R1 Access-list 101 permit ip 10.25.30.0 0.0.0.255 any What is the effect of this access list configuration?（）Apermit all packets matching the first three octets of the source address to all destinationsBpermit all packet matching the last octet of the destination address and accept all source addressesCpermit all packet matching the host bits in the source address to all destinationsDpermit all packet from the third subnet of the network address to all destinations