What are three key concepts that apply when configuring the EIGRP stub routing feature in a hub and spoke network?() A. A hub router prevents routes from being advertised to the remote router.B. Only remote routers are configured as stubs.C. Stub routers are not queried for routes.D. Spoke routers connected to hub routers answer the route queries for the stub router.E. A stub router should have only EIGRP hub routers as neighbors.F. EIGRP stub routing should be used on hub routers only.
What are three key concepts that apply when configuring the EIGRP stub routing feature in a hub and spoke network?()
A. A hub router prevents routes from being advertised to the remote router.
B. Only remote routers are configured as stubs.
C. Stub routers are not queried for routes.
D. Spoke routers connected to hub routers answer the route queries for the stub router.
E. A stub router should have only EIGRP hub routers as neighbors.
F. EIGRP stub routing should be used on hub routers only.
相关考题：
Refer to the exhibit. In a redundant hub - and - spoke deployment using EIGRP, what feature can be used to ensure that routers C through F are not used as transit routers for data traveling from router B to network 10.1.1.0? Select the best response.（）A. Use address summarization at routers C, D, E, and FB. Use the EIGRP Stub featu re on routers C, D, E, and FC. Use passive - interface on the spoke links in routers A and BD. Change the administrative distance in routers A and B for routes learned from routers C, D, E,and F
Refer to the exhibit. You are the network administrator of the Route.com company. You have been tasked to implement a hub and spoke EIGRP topology over Frame Relay to provide connectivity between the networks at headquarters and all 300 spokes. Before you begin the actual implementation, which three pieces of information are more important to know than the others?（）A. the Committed Information Rate of all the Frame Relay PVCsB. the Cisco IOS version running on all the routersC. the router model number of all the spoke routersD. the number of HQ networks connected behind the headquarter routersE. the routing policy, such as whether or not the spokes can be used as backup transient point between the two headquarter routers
You have just configured a static default route on router TK1. What is the purpose of a default route?() A. It is a route to be used when the routing protocol fails.B. It is a route configured by an ISP that sends traffic into a corporate network.C. It is a route used when a packet is destined for a remote network that is not listed in the routing table.D. It is a route manually configured for a specific remote network for which a routing protocol is not configured.E. It is used to send traffic to a stub network.
Refer to the exhibit. Router RTA is the hub router for routers RTB and RTC. The Frame Relay network is configured with EIGRP, and the entire network is in autonomous system 1. However,router RTB a nd RTC are not receiving each other‘s routes. What is the solution?（）A.Check and change the access lists on router RTAB.Configure the auto summary command under router eigrp 1 on router RTAC.Configure subinterfaces on the spoke routers and assig n different IP address subnets for each subinterfaceD.Issue the no ip split horizon command on router RTAE.Issue the no ip split horizon eigrp 1 command on router RTAF.Configure a distribute list on router RTA that allows it to advertise all r outes to the spoke routers
What parameters must you specify when you enable EIGRP routing?() A. The broadcast address, and AS numberB. The network number and AS numberC. EIGRP routing, network number and passive interfaceD. EIGRP routing, network number, and AS
Which two are advantages of static routing when compared to dynamic routing?() A.Security increases because only the network administrator may change the routing tablesB.Configuration complexity decreases as network size increasesC.Routing updates are automatically sent to neighborsD.Route summarization is compued automatically by the routerE.Routing traffic load is reduced when used in stub network linksF.An efficient algorithm is used to build routing tables,using automatic updatesG.Routing tables adapt automatically to topology changes.
What are three considerations when choosing the QoS model to deploy in a network？ （）A、 the routing protocols being utilized in the networkB、 the applications utilizing the networkC、 the traffic destinationsD、 network addressing schemeE、 cost of implementationF、 the amount of the control needed of the resources
Your network consists of a large hub - and - spoke Frame Relay network with a CIR of 56 kb/s foreach spoke. Which statement about the selection of a dynamic protocol is true?（）A、EIGRP would be appropriate if LMI type ANS I is NOT used.B、EIGRP would be appropriate, because the Frame Relay spokes could be segmented into their own areas.C、EIGRP would be appropriate, because by default, queries are not propagated across the slow speed Frame Relay links.D、EIGRP would be appropriate, because you can manage how much bandwidth is consumed over the Frame Relay interface.
r1 is the hub ， multipoint mode subinterface， r2 and r3 is spoke， when r2 down at the spoke， What will r1 react？how about r3？
What parameters must you specify when you enable EIGRP routing?（）A、The broadcast address, and AS numberB、The network number and AS numberC、EIGRP routing, network number and passive interfaceD、EIGRP routing, network number, and AS
How will router A choose a path to the 10.1.2.0/24 network when different routing protocols are configured (Choose three.)（）。A、If RIPv2 is the routing protocol, only the path AD will be installed in the routing table by default.B、If RIPv2 is the routing protocol, the equal cost paths ABD and ACD will be installed in the routing table by default.C、If EIGRP is the routing protocol, only the path AD will be installed in the routing table by default.D、If EIGRP is the routing protocol, the equal cost paths ABD and ACD will be installed in the routing table by default.E、If EIGRP and OSPF are both running on the network, the EIGRP paths will be installed in the routing table.F、If EIGRP and OSPF are both running on the network, the OSPF paths will be installed in the routing table.
Which of these statements is true of routing protocols in a hub-and-spoke IPsec VPN topology？（）A、 EIGRP can summarize per interface.B、 OSPF router databases remain independent.C、 When they are configured with stubs， EIGRP regularly floods the topology.D、 OSPF topology decisions are made independent of hierarchy or area.
Which two are advantages of static routing when compared to dynamic routing？（）A、Security increases because only the network administrator may change the routing tables.B、Configuration complexity decreases as network size increases.C、Routing updates are automatically sent to neighbors.D、Route summarization iscompued automatically by the router.E、Routing traffic load is reduced when used in stub network linksF、An efficient algorithm is used to build routing tables，using automatic updates.G、Routing tables adapt automatically to topology changes.
What is the advantage of using a multipoint interface instead of point-to-point subinterfaces when configuring a Frame Relay hub in a hub-and-spoke topology?（）A、it avoids split-horizon issues with distance vector routing protocols.B、IP addresses can be conserved if VLSM is not being used for subnetting.C、A multipoint interface offers greater security compared to point-to-point subinterface configurations.D、The multiple IP network addresses required for a multipoint interface provide greater addressing flexibility over point-to-point configurations.
Which two are advantages of static routing when compared to dynamic routing?（）A、Security increases because only the network administrator may change the routing tablesB、Configuration complexity decreases as network size increasesC、Routing updates are automatically sent to neighborsD、Route summarization is compued automatically by the routerE、Routing traffic load is reduced when used in stub network linksF、An efficient algorithm is used to build routing tables,using automatic updatesG、Routing tables adapt automatically to topology changes.
What are three key concepts that apply when configuring the EIGRP stub routing feature in a hub and spoke network？（）A、A hub router prevents routes from being advertised to the remote router.B、Only remote routers are configured as stubs.C、Stub routers are not queried for routes.D、Spoke routers connected to hub routers answer the route queries for the stub router.E、A stub router should have only EIGRP hub routers as neighbors.F、EIGRP stub routing should be used on hub routers only.
Which two steps below should you perform on the hub router while configuring EIGRP routing over DMVPN （mGRE tunnel）？ （）A、Set the NHRP hold time to match the EIGRP hold timeB、Add the enable eigrp stub commandC、Add the disable eigrp as-member split-horizon commandD、Add the disable eigrp as-member next-hop-self command
Which two are advantages of static routing when compared to dynamic routing?（）A、Security increases because only the network administrator may change the routing tables.B、Configuration complexity decreases as network size increases.C、Routing updates are automatically sent to neighbors.D、Route summarization iscompued automatically by the router.E、Routing traffic load is reduced when used in stub network links.F、An efficient algorithm is used to build routing tables,using automatic updates.G、Routing tables adapt automatically to topology changes.
What is an appropriate use of a default route？（）A、to provide routing to a local web serverB、to provide routing from an ISP to a stub networkC、to provide routing that will override the configured dynamic routing protocolD、to provide routing to a destination that is not specified in the routing table and which is outside the local network
单选题Which of these statements is true of routing protocols in a hub-and-spoke IPsec VPN topology？（）A EIGRP can summarize per interface.B OSPF router databases remain independent.C When they are configured with stubs， EIGRP regularly floods the topology.D OSPF topology decisions are made independent of hierarchy or area.
单选题What parameters must you specify when you enable EIGRP routing?（）AThe broadcast address, and AS numberBThe network number and AS numberCEIGRP routing, network number and passive interfaceDEIGRP routing, network number, and AS
单选题You have just configured a static default route on router TK1. What is the purpose of a default route?（）AIt is a route to be used when the routing protocol fails.BIt is a route configured by an ISP that sends traffic into a corporate network.CIt is a route used when a packet is destined for a remote network that is not listed in the routing table.DIt is a route manually configured for a specific remote network for which a routing protocol is not configured.EIt is used to send traffic to a stub network.
多选题Which two are advantages of static routing when compared to dynamic routing?（）ASecurity increases because only the network administrator may change the routing tablesBConfiguration complexity decreases as network size increasesCRouting updates are automatically sent to neighborsDRoute summarization is compued automatically by the routerERouting traffic load is reduced when used in stub network linksFAn efficient algorithm is used to build routing tables,using automatic updatesGRouting tables adapt automatically to topology changes.
单选题What is the advantage of using a multipoint interface instead of point-to-point subinterfaces when configuring a Frame Relay hub in a hub-and-spoke topology?（）Ait avoids split-horizon issues with distance vector routing protocols.BIP addresses can be conserved if VLSM is not being used for subnetting.CA multipoint interface offers greater security compared to point-to-point subinterface configurations.DThe multiple IP network addresses required for a multipoint interface provide greater addressing flexibility over point-to-point configurations.
单选题What is an appropriate use of a default route？（）Ato provide routing to a local web serverBto provide routing from an ISP to a stub networkCto provide routing that will override the configured dynamic routing protocolDto provide routing to a destination that is not specified in the routing table and which is outside the local network
多选题What are three key concepts that apply when configuring the EIGRP stub routing feature in a hub and spoke network？（）AA hub router prevents routes from being advertised to the remote router.BOnly remote routers are configured as stubs.CStub routers are not queried for routes.DSpoke routers connected to hub routers answer the route queries for the stub router.EA stub router should have only EIGRP hub routers as neighbors.FEIGRP stub routing should be used on hub routers only.
多选题How will router A choose a path to the 10.1.2.0/24 network when different routing protocols are configured (Choose three.)（）。AIf RIPv2 is the routing protocol, only the path AD will be installed in the routing table by default.BIf RIPv2 is the routing protocol, the equal cost paths ABD and ACD will be installed in the routing table by default.CIf EIGRP is the routing protocol, only the path AD will be installed in the routing table by default.DIf EIGRP is the routing protocol, the equal cost paths ABD and ACD will be installed in the routing table by default.EIf EIGRP and OSPF are both running on the network, the EIGRP paths will be installed in the routing table.FIf EIGRP and OSPF are both running on the network, the OSPF paths will be installed in the routing table.
多选题What are three considerations when choosing the QoS model to deploy in a network？（）Athe routing protocols being utilized in the networkBthe applications utilizing the networkCthe traffic destinationsDnetwork addressing schemeEcost of implementationFthe amount of the control needed of the resources