多选题How will router A choose a path to the 10.1.2.0/24 network when different routing protocols are configured (Choose three.)（）。AIf RIPv2 is the routing protocol, only the path AD will be installed in the routing table by default.BIf RIPv2 is the routing protocol, the equal cost paths ABD and ACD will be installed in the routing table by default.CIf EIGRP is the routing protocol, only the path AD will be installed in the routing table by default.DIf EIGRP is the routing protocol, the equal cost paths ABD and ACD will be installed in the routing table by default.EIf EIGRP and OSPF are both running on the network, the EIGRP paths will be installed in the routing table.FIf EIGRP and OSPF are both running on the network, the OSPF paths will be installed in the routing table.
多选题
How will router A choose a path to the 10.1.2.0/24 network when different routing protocols are configured (Choose three.)（）。
A
If RIPv2 is the routing protocol, only the path AD will be installed in the routing table by default.
B
If RIPv2 is the routing protocol, the equal cost paths ABD and ACD will be installed in the routing table by default.
C
If EIGRP is the routing protocol, only the path AD will be installed in the routing table by default.
D
If EIGRP is the routing protocol, the equal cost paths ABD and ACD will be installed in the routing table by default.
E
If EIGRP and OSPF are both running on the network, the EIGRP paths will be installed in the routing table.
F
If EIGRP and OSPF are both running on the network, the OSPF paths will be installed in the routing table.
参考解析
解析：
暂无解析
相关考题：
Cisco is the leader in the router market space. What basic functions do their routers perform. in a network? (Choose two)A. The microsegmentation of broadcast domainsB. Path selectionC. Packet switchingD. Bridging between LAN segmentsE. Access layer securityF. VLAN membership assignmentG. Application optimization
Router VE1 has just received a packet and needs to route it. What two actions must this router take in order to route incoming packets? (Choose two)A. Inspect the routing table to select the best path to the destination network addresses.B. Validate sources of routing information.C. Inspect the ARP table to verify a legitimate source MAC address for each packet.D. Identify the destination network address of each packet.E. Verify the receipt of routed packets by the next hop router.F. Identify the source network address of each packet.
How is an RSVP resv message sent back to the ingress router?() A. reverse path of the RROB. least cost to the ingress routerC. shortest path to the egress routerD. reverse path of the path vector TLV
What is the term "ordered control" mean regarding how MPLS LSPs are established?() A. establish starting at the egress router going back to the ingress routerB. establish starting at the ingress router going downstream to the egress routerC. establish when a router learns of a new prefixD. establish when the path correctly matches the reverse path forwarding check
After implementing EIGRP on your network, you issue the show ip eigrp traffic command on router C. The following output is shown:What information can you determine about this network?() A. The network is stableB. There is a flapping link or interface, and router C knows an alternate path to the networkC. There is a flapping link or interf ace, and router C does not know an alternate path to the networkD. EIGRP is not working correctly on router CE. There is not enough information to make a determination
After implementing EIGRP on your network, you issue the show ip eigrp traffic command on router C. The following output is shown:What can you conclude about this network? () A. The network has been stable for at least the last 45 minutesB. There is a flapping link or interf ace, and router C knows an alternate path to the networkC. There is a flapping link or interface, and router A does not know an alternate path to the networkD. EIGRP is not working correctly on router CE. There is not enough information to make a determination
Refer to the exhibit The neighbor 10.1.1.1 weight 200 BGP configuration command has been configured on router A. What will be the result of this configuration? () A. Router A will prefer the path through router B for network 172.20.0.0B. Router A will prefer the path through router C for network 172.20.0.0C. Packets from router D will prefer the path through router B for networks advertised by router AD. Packets from r outer D will prefer the path through router C for networks advertised by router A
What are some of the advantages of using a router to segment the network (Choose two.)()。 A.Filtering can occur based on Layer 3 information.B.Broadcasts are eliminated.C.Routers generally cost less than switches.D.Broadcasts are not forwarded across the router.E.Adding a router to the network decreases latency.
A network administrator needs to configure a serial link between the main office and a remote location. The router at the remote office is a non-Cisco router.How should the network administrator configure the serial interface of the main office router to make the connection?（）A.B.C.D.
What is the purpose using the traceroute command?（）A、to map all the devices on a network.B、to display the current TCP/IP configuration values.C、to see how a device MAC address is mapped to its IP address.D、to see the path a packet will take when traveling to a specified destination.E、to display the MTU values for each router in a specified network path from source to a destination.
A router simultaneously receives all the following routes in various routing updates. Which of thefollowing routes would end up in the routing table？（Choose all that apply.）（）A、RIP route 10.1.2.0/24B、EIGRP route 10.1.2.0/24C、RIP route 10.1.0.0/16D、OSPF route 10.1.0.0/16E、RIP route 10.0.0.0/16F、OSPF route 10.1.2.0/24
A router receives information about network 192.168.10.0/24 from multiple sources.What will the routerconsider the most reliable information about the path to that network？（）A、an OSPF update for network 192.168.0.0/16B、a static router to network 192.168.10.0/24C、a static router to network 192.168.10.0/24 with a local serial interface configured as the next hopD、a RIP update for network 192.168.10.0/24E、a directly connected interface with an address of 192.168.10.254/24F、a default route with a next hop address of 192.168.10.1
How will router A choose a path to the 10.1.2.0/24 network when different routing protocols are configured (Choose three.)（）。A、If RIPv2 is the routing protocol, only the path AD will be installed in the routing table by default.B、If RIPv2 is the routing protocol, the equal cost paths ABD and ACD will be installed in the routing table by default.C、If EIGRP is the routing protocol, only the path AD will be installed in the routing table by default.D、If EIGRP is the routing protocol, the equal cost paths ABD and ACD will be installed in the routing table by default.E、If EIGRP and OSPF are both running on the network, the EIGRP paths will be installed in the routing table.F、If EIGRP and OSPF are both running on the network, the OSPF paths will be installed in the routing table.
What are some of the advantages of using a router to segment the network? (Choose two.)（）A、Filtering can occur based on Layer 3 information.B、Broadcasts are eliminated.C、Routers generally cost less than switches.D、Broadcasts are not forwarded across the router.E、Adding a router to the network decreases latency.
Which of the following OSPF commands, when used together, will put the network 192.168.10.0/24 into OSPF area 0?（）A、Router(config-router)# network 192.168.10.0 0.0.0.255 0B、Router(config-router)# network 192.168.10.0 0.0.0.255 area 0C、Router(config-router)# network 192.168.10.0 255.255.255.0 area 0D、Router(config)# router ospf 0E、Router(config)# router ospf 1
A router receives information about network 192.168.10.0/24 from multiple sources.What will the router consider the most reliable information about the path to that network?（）A、an OSPF update for network 192.168.0.0/16B、a static router to network 192.168.10.0/24C、a static router to network 192.168.10.0/24 with a local serial interface configured as the next hopD、a RIP update for network 192.168.10.0/24E、a directly connected interface with an address of 192.168.10.254/24F、a default route with a next hop address of 192.168.10.1
A router receives information about network 192.168.10.0/24 from multiple sources. What will the router consider the most reliable information about the path to that network（）。A、a directly connected interface with an address of 192.168.10.254/24B、a static route to network 192.168.10.0/24C、a RIP update for network 192.168.10.0/24D、an OSPF update for network 192.168.0.0/16E、a default route with a next hop address of 192.168.10.1F、a static route to network 192.168.10.0/24 with a local serial interface configured as the next hop
单选题What is the purpose using the traceroute command?（）Ato map all the devices on a network.Bto display the current TCP/IP configuration values.Cto see how a device MAC address is mapped to its IP address.Dto see the path a packet will take when traveling to a specified destination.Eto display the MTU values for each router in a specified network path from source to a destination.
单选题How is an RSVP resv message sent back to the ingress router？（）A reverse path of the RROB least cost to the ingress routerC shortest path to the egress routerD reverse path of the path vector TLV
单选题You have a router running BGP for the MPLS network and OSPF for the local LAN network at the sales office. A route is being learned from the MPLS network that also exists on the OSPF local network.It is important that the router chooses the local LAN route being learned from the downstream switch running OSPF rather than the upstream BGP neighbor. Also，if the local OSPF route goes away，the BGP route needs to be used. What should be configured to make sure that the router will choose the LAN network as the preferred path？（）Astatic route needs to be addedBfloating static route needs to be addedCbgp backdoor commandDospf backdoor command
单选题What is the term "ordered control" mean regarding how MPLS LSPs are established?（）Aestablish starting at the egress router going back to the ingress routerBestablish starting at the ingress router going downstream to the egress routerCestablish when a router learns of a new prefixDestablish when the path correctly matches the reverse path forwarding check
单选题Network A has a spanning-tree problem in which the traffic is selecting a longer path. How is the path cost calculated？（）Anumber of hopsBpriority of the bridgeCinterface bandwidthDinterface delayENone of the above
单选题How is an RSVP resv message sent back to the ingress router?（）Areverse path of the RROBleast cost to the ingress routerCshortest path to the egress routerDreverse path of the path vector TLV
单选题A router receives information about network 192.168.10.0/24 from multiple sources.What will the router consider the most reliable information about the path to that network？（）Aan OSPF update for network 192.168.0.0/16Ba static router to network 192.168.10.0/24Ca static router to network 192.168.10.0/24 with a local serial interface configured as the next hopDa RIP update for network 192.168.10.0/24Ea directly connected interface with an address of 192.168.10.254/24Fa default route with a next hop address of 192.168.10.1
多选题A router simultaneously receives all the following routes in various routing updates. Which of thefollowing routes would end up in the routing table？（Choose all that apply.）（）ARIP route 10.1.2.0/24BEIGRP route 10.1.2.0/24CRIP route 10.1.0.0/16DOSPF route 10.1.0.0/16ERIP route 10.0.0.0/16FOSPF route 10.1.2.0/24
单选题A router receives information about network 192.168.10.0/24 from multiple sources. What will the router consider the most reliable information about the path to that network（）。Aa directly connected interface with an address of 192.168.10.254/24Ba static route to network 192.168.10.0/24Ca RIP update for network 192.168.10.0/24Dan OSPF update for network 192.168.0.0/16Ea default route with a next hop address of 192.168.10.1Fa static route to network 192.168.10.0/24 with a local serial interface configured as the next hop
单选题A router receives information about network 192.168.10.0/24 from multiple sources.What will the routerconsider the most reliable information about the path to that network？（）Aan OSPF update for network 192.168.0.0/16Ba static router to network 192.168.10.0/24Ca static router to network 192.168.10.0/24 with a local serial interface configured as the next hopDa RIP update for network 192.168.10.0/24Ea directly connected interface with an address of 192.168.10.254/24Fa default route with a next hop address of 192.168.10.1