单选题A customer has shut down an LPAR after using DLPAR to add or remove processor and memory resources. When the partition is reactivated, the desired changes are missing. What action, or sequence of actions, will immediately and permanently solve this problem?（）AAdd or remove the resources in the profile, click 'apply', then 'save'.BAdd or remove the resources using DLPAR and change the partition profile.CAdd or remove the resources using DLPAR, then shutdown and reactivate the LPAR.DAdd or remove the resources in the system profile and reboot the managed system.
单选题
A customer has shut down an LPAR after using DLPAR to add or remove processor and memory resources. When the partition is reactivated, the desired changes are missing. What action, or sequence of actions, will immediately and permanently solve this problem?（）
A
Add or remove the resources in the profile, click 'apply', then 'save'.
B
Add or remove the resources using DLPAR and change the partition profile.
C
Add or remove the resources using DLPAR, then shutdown and reactivate the LPAR.
D
Add or remove the resources in the system profile and reboot the managed system.
参考解析
解析：
暂无解析
相关考题：
A customer opened a ticket with the help desk two days ago to report that their computer ismaking a strange loud noise. Which of the following should the technician do FIRST after arriving at the site?（）A. Ask another technician who has worked with this computer previously to learn about any other prior issues.B. Ask the customer open-ended questions to attempt to narrow down the issue, then repeat the issue to the customer for validation.C. Ask the customer close-ended questions to attempt to narrow down the issue while not using technical jargon to avoid overwhelming the customer.D. Run preliminary diagnostic tests to narrow down the issue and update the status of the trouble ticket then ask the customer about any changes they have made to the computer.
An administrator has shut down a server to install additional memory. When the administrator restarts the server after the upgrade, it times out. Which of the following could be the cause of the problem?（）A. Processor failureB. Third party memoryC. Disk drive failureD. ESD during the upgradeE. Backplane failure
A client is experiencing issues after cloning an LPAR using alt_disk_install. DLPAR functions are not available for the new LPAR. Also, there is a lot of network traffic to the HMC. What is the most probable cause of this problem?（）A、DLPAR functions are not available for cloned partitionsB、The new partition has the same node number as the original LPARC、Additional filesets need to be reinstalled after the alt_disk_install cloningD、The speed and duplex settings on the Ethernet adapter on the new LPAR is misconfigured
A customer has been receiving warning alerts on their storage units. All data is protected nightlyby a backup and has been tested without any issues. What should the customer do prior tocontacting IBM Support？（）A、collect all support dataB、implement a current backupC、update all firmware levelsD、shut down the storage system
A user is reporting that a PC will suddenly shut down without warning. The PC boots up with no problems, but after using the PC for a short time, the PC turns off. Which of the following components should the technician check?（） (Select TWO).A、CPU fanB、RAMC、Hard driveD、Power supplyE、Video card
An administrator has shut down a server to install additional memory. When the administrator restarts the server after the upgrade, it times out. Which of the following could be the cause of the problem?（）A、Processor failureB、Third party memoryC、Disk drive failureD、ESD during the upgradeE、Backplane failure
A customer has an entry level Power System that is currently partitioned and managed by a Hardware Management Console （HMC）. For operational reasons， it must be disconnected from the HMC and configured as a new development system. How should the customer proceed to implement PowerVM Express and Integrated Virtualization Manager （IVM） on this Power System？ （）A、 Install a VIO server as an additional partition and DLPAR the resources from the existing partition to the VIO server.B、 Create a service partition and install a VIO server. This will automatically move resources to the VIO server on reboot of the managed system.C、 Delete all the existing LPARs， create a new LPAR and assign all the system resources to this LPAR and then install the VIO server on this LPAR.D、 Reset the machine to Manufacturing Default Configuration and install the VIO server on the resulting partition created， which will own all system resources.
A customer has an existing DS5300 system attached to two Brocade switches with eight Windowsservers. The customer wants to add their System i p750 server to this SAN. From the followingchoices what is the simplest and least expensive solution for this customer？（）A、add twofibre HBAs to the System i and connect to the SANB、add twofibre HBAs to the System i and connect to the Windows ServersC、add twofibre HBAs to the System i and connect to the System i using VIOSD、add two SAS HBAs to the Systemi array and connect directly to the DS5300
A p5 570 customer is currently running AIX 5.3. The customer now wants to add Virtual Ethernet to two of the LPARs. This will enable the application tier can communicate to the database tier without using an external Ethernet card. What is the best way to accomplish this task?（）A、Create a VIO serverB、Modify the LPAR profiles to add a Virtual Ethernet adapterC、Buy the Advanced Power Virtualization feature and enter a authorization code at the HMCD、Buy the Advanced Power Virtualization feature and enter a authorization code at the service processor menu
When doing the Solution Assurance for a p5 570 with several LPARs, it is discovered that the customer plans to back the system up using mksysb. The customer would like to do unattended automated system backups and incorporate them into their off-site data recovery system. Which mksysb solution should be implemented?（）A、A local DVD-ROM driveB、A NFS mount on a NIM MasterC、A SSA disk array and mirror the dataD、A local tape drive and use DLPAR to move the tape to each LPAR
A customer has shut down an LPAR after using DLPAR to add or remove processor and memory resources. When the partition is reactivated, the desired changes are missing. What action, or sequence of actions, will immediately and permanently solve this problem?（）A、Add or remove the resources in the profile, click 'apply', then 'save'.B、Add or remove the resources using DLPAR and change the partition profile.C、Add or remove the resources using DLPAR, then shutdown and reactivate the LPAR.D、Add or remove the resources in the system profile and reboot the managed system.
A resource was dynamically assigned to an LPAR. The customer wants to make the assignment permanent. What does the technical specialist need to do to reconfigure the LPARs to make the assignment permanent？（）A、Reboot the source LPAR.B、Remove the resource from the source LPAR.C、Rediscover the managed system from the HMC.D、Add the resource to the profile of the LPAR.
Company.com is migrating from a third party managed disk subsystem to an IBM TotalStorage Enterprise Storage Server. Connection of the new storage server is complete， and it has been tested on all of the nodes in the three node HACMP cluster. How does the customer migrate to the new storage server with minimum down time？（）A、 Shut down one node at a time and let the other node serve the applicationB、 Stop HACMP with the forced option and perform migration of the disks on one node，then restart HACMPC、 Stop both nodes and perform the migration all at once using standard AIX commands in parallel， then restart the clusterD、 Use C-SPOC to add the new disks to the cluster and migrate the information off the existing disks， then remove the old disks with C-SPOC
One of Company.com’s Linux partitions is experiencing excessive paging. They want to provide more memory to the partition to resolve this problem. What is the best method to add the memory？（）A、Add an additional virtual swap device to the partition.B、Use DLPAR to dynamically add the required memory to the partition.C、Shut down the partition and redefine its profile with additional memory.D、Change Partition Load Manager parameters to provide the partition with additional memory shares.
System configurations on the HMC have been backed up correctly. After a restore, the partitions are defined with different characteristics than the running systems. What is the most probable cause of this problem?（）A、The LPAR Configuration backup is corruptB、The LPAR Configuration has been altered using DLPARC、The LPAR Configuration backup was performed on a different HMCD、The LPAR Configuration has been altered through the Advanced System Management Interface （ASMI） on the server after the backup was performed
In your database， all the tablespaces are locally managed. You started Recovery Manager （RMAN） using recovery catalog and restored the control file by using the following command： RMAN RESTORE CONTROLFILE; Which two operations do you need to perform after restoring the control file from backup？（）A、shut down and restart the instanceB、add new tempfiles to the temporary tablespaces after recoveryC、perform a media recovery and open the database with the RESETLOGS optionD、perform a media recovery and bring the database to NOARCHIVELOG mode
单选题Company.com is migrating from a third party managed disk subsystem to an IBM TotalStorage Enterprise Storage Server. Connection of the new storage server is complete， and it has been tested on all of the nodes in the three node HACMP cluster. How does the customer migrate to the new storage server with minimum down time？（）A Shut down one node at a time and let the other node serve the applicationB Stop HACMP with the forced option and perform migration of the disks on one node，then restart HACMPC Stop both nodes and perform the migration all at once using standard AIX commands in parallel， then restart the clusterD Use C-SPOC to add the new disks to the cluster and migrate the information off the existing disks， then remove the old disks with C-SPOC
单选题After the order “（）” is given, the air system is shut down, the turning gear put in.AFinished with EngineBStop the EngineCStand-by EngineDSlow-down Engine
单选题A medical customer has a rack with four BladeCenter H chassis that have been operating normally for several months. After installing a new rack of servers in the data center, the system administrator notices the blowers in the BladeCenters have increased their speed. Which of the following caused this problem? （）AThe room temperature has reached 23C (73.4F). BA Blade within the chassis has been shut down. CThe ambient temperature in the data center has increased DOne of the additional System X servers in the BladeCenter rack has failed.
单选题The database is running in the ARCHIVELOG mode. It has three redo log groups with one member each.One of the redo log groups has become corrupted. You have issued the following command during the recovery of a damaged redo log file: ALTER DATABASE CLEAR UNARCHIVED LOGFILE GROUP 3; Which action should you perform immediately after using this command?（）AYou should perform a log switchBYou should make a backup of the databaseCYou should switch the database to the NONARCHIVELOG modeDYou should shut down the database instance and perform a complete database recovery
单选题Companycom has just purchased a p5 570 with AIX 5.3. The customer would like to add a training LPAR to the system, but no processors are available. All of the partitions are using dedicated resources. The test LPAR is using one processor and has a 90% CPU idle rate. What can be done to setup this training LPAR quickly without disabling their current environment?（）AUse AIX 5.3 which supports micro-partitioning for both the test and training LPARSBUse DLPAR to move resources from the test LPAR to training when training is activeCInstall Partition Load Manager to share resources between the test and training environmentsDInstall Advanced Power Virtualization and then use micro-partitioning for both the test and training LPARs
单选题When doing the Solution Assurance for a p5 570 with several LPARs, it is discovered that the customer plans to back the system up using mksysb. The customer would like to do unattended automated system backups and incorporate them into their off-site data recovery system. Which mksysb solution should be implemented?（）AA local DVD-ROM driveBA NFS mount on a NIM MasterCA SSA disk array and mirror the dataDA local tape drive and use DLPAR to move the tape to each LPAR
单选题System configurations on the HMC have been backed up correctly. After a restore, the partitions are defined with different characteristics than the running systems. What is the most probable cause of this problem?（）AThe LPAR Configuration backup is corruptBThe LPAR Configuration has been altered using DLPARCThe LPAR Configuration backup was performed on a different HMCDThe LPAR Configuration has been altered through the Advanced System Management Interface （ASMI） on the server after the backup was performed
多选题An administrator has shut down a server to install additional memory. When the administrator restarts the server after the upgrade， it times out. Which of the following could be the cause of the problem？（）AProcessor failureBThird party memoryCDisk drive failureDESD during the upgradeEBackplane failure
单选题A customer opened a ticket with the help desk two days ago to report that their computer ismaking a strange loud noise. Which of the following should the technician do FIRST after arriving at the site?（）AAsk another technician who has worked with this computer previously to learn about any other prior issues.BAsk the customer open-ended questions to attempt to narrow down the issue, then repeat the issue to the customer for validation.CAsk the customer close-ended questions to attempt to narrow down the issue while not using technical jargon to avoid overwhelming the customer.DRun preliminary diagnostic tests to narrow down the issue and update the status of the trouble ticket then ask the customer about any changes they have made to the computer.
多选题A user is reporting that a PC will suddenly shut down without warning. The PC boots up with no problems, but after using the PC for a short time, the PC turns off. Which of the following components should the technician check?（） (Select TWO).ACPU fanBRAMCHard driveDPower supplyEVideo card
单选题A client is experiencing issues after cloning an LPAR using alt_disk_install. DLPAR functions are not available for the new LPAR. Also, there is a lot of network traffic to the HMC. What is the most probable cause of this problem?（）ADLPAR functions are not available for cloned partitionsBThe new partition has the same node number as the original LPARCAdditional filesets need to be reinstalled after the alt_disk_install cloningDThe speed and duplex settings on the Ethernet adapter on the new LPAR is misconfigured