单选题A client is experiencing issues after cloning an LPAR using alt_disk_install. DLPAR functions are not available for the new LPAR. Also, there is a lot of network traffic to the HMC. What is the most probable cause of this problem?（）ADLPAR functions are not available for cloned partitionsBThe new partition has the same node number as the original LPARCAdditional filesets need to be reinstalled after the alt_disk_install cloningDThe speed and duplex settings on the Ethernet adapter on the new LPAR is misconfigured
单选题
A client is experiencing issues after cloning an LPAR using alt_disk_install. DLPAR functions are not available for the new LPAR. Also, there is a lot of network traffic to the HMC. What is the most probable cause of this problem?（）
A
DLPAR functions are not available for cloned partitions
B
The new partition has the same node number as the original LPAR
C
Additional filesets need to be reinstalled after the alt_disk_install cloning
D
The speed and duplex settings on the Ethernet adapter on the new LPAR is misconfigured
参考解析
解析：
暂无解析
相关考题：
Users are reporting that they are still experiencing network issues even though a fix was recentlyapplied. Which of the following troubleshooting methodology steps is the administrator using?() A. Escalating the problemB. Testing the solution and identifying the effectsC. Continuing to gather information about the same symptomsD. Documenting the solution and the entire process
Using FTP passive mode， after the client opens thecommand channel （port 21） to the FTP server and requests passive mode， what will be the next step？ （）A、 The FTP server sends back an acknowledgment （ACK） to the clientB、 The FTP server allocates a port touse for the data channel and transmit that port number to the clientC、 The FTP server opens the data channel to the client using the port number indicated by the clientD、 The FTP client opens the data channel to the FTP server on Port 20E、 The FTP client opens the datachannel to the FTP server on Port 21
Which statement correctly describes a wireless client Layer 2 roam from AP1 to AP2 while joined to a multicast stream using Cisco WLC running v5.2?（）A、Client issues an IGMP join after association with AP2, allowing AP2 to request a multicast stream from Cisco WLC after AP1 issues an IGMP query.B、Client issues an IGMP join after association with AP2, allowing AP2 to request a multicast stream from Cisco WLC independent of AP1 multicast member status.C、Client resumes multicast after association with AP2, because multicast information is sent in mobility exchanges and AP2 is already a member of the multicast group, provided that another client has already joined that multicast.D、Client resumes multicast after association with AP2, because multicast information is sent in mobility exchanges and AP2 is already a member of the multicast group, regardless if any other clients have already joined that multicast.
A client is experiencing issues after cloning an LPAR using alt_disk_install. DLPAR functions are not available for the new LPAR. Also, there is a lot of network traffic to the HMC. What is the most probable cause of this problem?（）A、DLPAR functions are not available for cloned partitionsB、The new partition has the same node number as the original LPARC、Additional filesets need to be reinstalled after the alt_disk_install cloningD、The speed and duplex settings on the Ethernet adapter on the new LPAR is misconfigured
To control the execution of a server process when it is receiving bad packets from a potentially malicious client, you set the SEC_PROTOCOL_ERROR_FURTHER_ACTION initialization parameter as follows: SQL ALTER SYSTEM SET SEC_PROTOCOL_ERROR_FURTHER_ACTION = Drop,10; What is the significance of this setting?（）A、It terminates the client connection after 10 bad packets and the client cannot reconnect to the same instance.B、It terminates the client connection after 10 bad packets but the client can still reconnect, and attempt the same operation again.C、It terminates the client connection 10 seconds after receiving a bad packet and the client cannot reconnect to the same instance.D、It terminates the client connection after receiving a bad packet and the client can reconnect to the same instance after 10 minutes.
Your client has deployed a cisco wireless location appliance within their warehouse environment. they have been experiencing problems with tracking objects using active rfid tags. the rfid tag data is not being collected. On which device would you verify that rfid status has been enabled？（）A、cisco wcsB、access pointC、wireless controllerD、location manager
A system administrator has been instructed to attach storage in their client LPARs, in a Power 770, with fibre channel adapters using N_port ID virtualization (NPIV). Which of the following partitions has the minimum requirements to utilize virtual fibre channel?（）A、LPAR-A with 1Gb FC HBA and SAN connectionB、LPAR-B with 2Gb FC HBA and SAN connectionC、LPAR-C with 4Gb FC HBA and SAN connectionD、LPAR-D with 8Gb FC HBA and SAN connection
A system is experiencing name resolution issues. The administrator has verified that /etc/resolv.conf is suitably configured using correct syntax. However, processes run by non-root users are failing to resolve any hostnames to IP addresses with the error 'No response from server'. Which tool will help trace the nslookup command in an attempt to investigate the problem?（）A、kdbB、dbxC、traceD、truss
After using the alt_disk_install command to clone a system image to another disk, the system administrator noticed a large number of defined devices not allocated to the LPAR. Which of the following is the most likely cause of this situation?（）A、The cfgmgr command was not run to reconfigure the devicesB、The machine was not booted into SMS MultiBoot mode after configurationC、The machine was not in full system partition mode when the volume was createdD、The alt_disk_install command was not run with the -O option to remove references in the ODM
A hospital customer with an experienced AIX and Microsoft Windows staff wants to consolidate all of their file/print services onto fewer systems. They currently use multiple Microsoft Windows-based Intelsystems that are experiencing reliability problems. They also have POWER4+ systems that are running multiple AIX LPARs that have experienced no reliability issues. They need at least 99.99% uptime. Which solution will meet their uptime needs at the lowest cost？（）A、Combine the file/print servers onto a larger Intel-based machine （x445）.B、Bring up a Linux LPAR on the pSeries and run Samba to provide file/print services.C、Bring up another AIX LPAR on the pSeries and run Samba to provide file/print services.D、Bring up another AIX LPAR on the pSeries and run Connect Direct to provide file/print services.
A customer has shut down an LPAR after using DLPAR to add or remove processor and memory resources. When the partition is reactivated, the desired changes are missing. What action, or sequence of actions, will immediately and permanently solve this problem?（）A、Add or remove the resources in the profile, click 'apply', then 'save'.B、Add or remove the resources using DLPAR and change the partition profile.C、Add or remove the resources using DLPAR, then shutdown and reactivate the LPAR.D、Add or remove the resources in the system profile and reboot the managed system.
After making changes to the profile for an LPAR, the administrator asks the operator to bring the LPAR back up into a running state with the new changes. Which of the following is the correct way to do this?（）A、Shutdown and activate the partition profileB、Reboot the partition using the reboot commandC、Reboot the partition using the 'shutdown -r' commandD、Right click on the partition profile and select the 'apply changes' option
Companycom LPAR that is using a Virtual IO Server needs to be more highly available. How can this be accomplished using APV features?（）A、Reallocate the Virtual IO Server disks to the user LPARB、Create a stripe-group within the Virtual IO Server to protect against disk failureC、Reconfigure the user LPAR to use both locally owned disk and a Virtual SCSI diskD、Create a second Virtual IO Server and reconfigure the user LPAR to mirror across both Virtual IO Servers
An administrator is trying to diagnose as to why a new VIO client （vio_client1） cannot see an allocated disk （hdisk4） from a VIO server （VIOS-A）. The client virtual SCSI adapter has a slot ID of 5 and the corresponding VIO server virtual SCSI adapter has a slot ID of 3. The administrator checks the virtual SCSI configuration from the HMC using the following lshwres command. lshwres –r virtualio --rsubtype scsi -m 9117-570*65ABCDE --level lpar -F / lpar_name，slot_num，remote_lpar_name，remote_slot_num，backing_device VIOS A，5，vio_client2，2，hdisk3 VIOS-A，4，vio_client1，4，hdisk4 VIOS-A，3，vio_client1，6，hdisk5 VIOS-A，2，vio_client3，2，hdisk6 vio_client2，2，VIOS-A，5，hdisk0 vio_client1，4，VIOS-A，4，hdisk0 vio_client1，5，VIOS-A，3，null vio_client3，2，VIOS-A，2，hdisk0 From the output above， what is the most likely reason why the client cannot see the mapped storage？（）A、 The hard disk has been inccorectly mapped on the VIO server.B、 The hard disk has been incorrectly addressed on the VIO client.C、 The client SCSI adapter has been mapped to the incorrect server SCSI adapter.D、 The server SCSI adapter has been mapped to the incorrect client server adapter.
System configurations on the HMC have been backed up correctly. After a restore, the partitions are defined with different characteristics than the running systems. What is the most probable cause of this problem?（）A、The LPAR Configuration backup is corruptB、The LPAR Configuration has been altered using DLPARC、The LPAR Configuration backup was performed on a different HMCD、The LPAR Configuration has been altered through the Advanced System Management Interface （ASMI） on the server after the backup was performed
In a shared server configuration， which two describe the actions that the listener can take to service a client request？（）A、The listener hands the connection request directly to a dispatcher. B、A dedicated server inherits the connection request from the listener. C、The client connects to a dedicated server directly using a protocol address provided by the listener. D、The application initiating the session spawns a dedicated server process for the connection request. E、The listener issues a redirect message to the client, containing the protocol address of a dispatcher. The client then terminates the network session to the listener and establishes a network session to the dispatcher, using the network address provided in the redirect message.
Your network has a main office and a branch office. The branch office has five client computers that runWindows 7. All client computers are configured to use BranchCache. At the branch office, a computer named Computer1 is experiencing performance issues. You need to temporarily prevent all computers fromretrieving cached content from Computer1. What should you do on Computer1?（）A、At the command prompt， run Netsh branchcache flush.B、At the command prompt， run Netsh branchcache dump.C、Modify the Configure BranchCache for network files Group Policy setting.D、Modify the Set percentage of disk space used for client computer cache Group Policy setting.
You create Windows Forms applications by using the .NET Framework 3.5.You plan to deploy a new application.You need to ensure that on deployment， the application meets the following requirements： （1）It is executed on the client computer （2）It is removed from the client computer after the application is closed （3）It is not displayed in theAdd/Remove programs panel on the client computer What should you do？（）A、Deploy the application to a central network server.Access the application by using the Remote Desktop Connection tool.B、Deploy the application by using the ClickOnce technology.Use the Mage exe tool to set the Online Only option in the deployment manifest.C、Deploy the application by using the ClickOnce technology.Set the Install attribute of the deployment tag to true in the deployment manifest.D、Deploy the application to a CDROM by using the ClickOnce technology.Execute the application from the CDROM
Your company has client computers that run Windows XP Professional. You are planning to install Windows 7 Enterprise on the existing client computers. You need to ensure that the user state can be viewed after it has been collected and saved. What are two possible ways to achieve this goal？（）A、Use a hard-link migration storeB、Use an uncompressed migration storeC、Perform an offline migration by using WindowsoldD、Perform an offline migration by using Windows PE
单选题To control the execution of a server process when it is receiving bad packets from a potentially malicious client, you set the SEC_PROTOCOL_ERROR_FURTHER_ACTION initialization parameter as follows: SQL ALTER SYSTEM SET SEC_PROTOCOL_ERROR_FURTHER_ACTION = Drop,10; What is the significance of this setting?（）AIt terminates the client connection after 10 bad packets and the client cannot reconnect to the same instance.BIt terminates the client connection after 10 bad packets but the client can still reconnect, and attempt the same operation again.CIt terminates the client connection 10 seconds after receiving a bad packet and the client cannot reconnect to the same instance.DIt terminates the client connection after receiving a bad packet and the client can reconnect to the same instance after 10 minutes.
单选题System configurations on the HMC have been backed up correctly. After a restore, the partitions are defined with different characteristics than the running systems. What is the most probable cause of this problem?（）AThe LPAR Configuration backup is corruptBThe LPAR Configuration has been altered using DLPARCThe LPAR Configuration backup was performed on a different HMCDThe LPAR Configuration has been altered through the Advanced System Management Interface （ASMI） on the server after the backup was performed
多选题In a shared server configuration， which two describe the actions that the listener can take to service a client request？（）AThe listener hands the connection request directly to a dispatcher.BA dedicated server inherits the connection request from the listener.CThe client connects to a dedicated server directly using a protocol address provided by the listener.DThe application initiating the session spawns a dedicated server process for the connection request.EThe listener issues a redirect message to the client, containing the protocol address of a dispatcher. The client then terminates the network session to the listener and establishes a network session to the dispatcher, using the network address provided in the redirect message.
单选题You are creating a Windows Forms Application by using the .NET Framework 3.5.You plan to deploy a new Applciation.You need to ensure that on deployment， the application meets the following requirements； （1）It is executed on the client computer. （2）It is removed from the client computer after the application closed. （3）It is not displayed in the Add/Remove programs panel on the client computer. What sould you do？（）ADeploy the application to a central network server.- Access the application by using hte Remote Desktop Connection tool.BDeploy the application by using the ClickOnce technology.- Use the Mage.exe tool to set the Online Only option in the deployment manifest.CDeploy the application by using the ClickOnce technologoy.- Set the Install attiribute of the deployment tag to true in the deployment manifest.DDeploy the application to a CD-ROM by using the ClickOnce technology. - Execute the application from the CD-ROM.
单选题After using the alt_disk_install command to clone a system image to another disk, the system administrator noticed a large number of defined devices not allocated to the LPAR. Which of the following is the most likely cause of this situation?（）AThe cfgmgr command was not run to reconfigure the devicesBThe machine was not booted into SMS MultiBoot mode after configurationCThe machine was not in full system partition mode when the volume was createdDThe alt_disk_install command was not run with the -O option to remove references in the ODM
单选题Using FTP passive mode， after the client opens thecommand channel （port 21） to the FTP server and requests passive mode， what will be the next step？ （）A The FTP server sends back an acknowledgment （ACK） to the clientB The FTP server allocates a port touse for the data channel and transmit that port number to the clientC The FTP server opens the data channel to the client using the port number indicated by the clientD The FTP client opens the data channel to the FTP server on Port 20E The FTP client opens the datachannel to the FTP server on Port 21
单选题Users are reporting that they are still experiencing network issues even though a fix was recentlyapplied. Which of the following troubleshooting methodology steps is the administrator using?（）AEscalating the problemBTesting the solution and identifying the effectsCContinuing to gather information about the same symptomsDDocumenting the solution and the entire process
单选题Which statement correctly describes a wireless client Layer 2 roam from AP1 to AP2 while joined to a multicast stream using Cisco WLC running v5.2?（）AClient issues an IGMP join after association with AP2, allowing AP2 to request a multicast stream from Cisco WLC after AP1 issues an IGMP query.BClient issues an IGMP join after association with AP2, allowing AP2 to request a multicast stream from Cisco WLC independent of AP1 multicast member status.CClient resumes multicast after association with AP2, because multicast information is sent in mobility exchanges and AP2 is already a member of the multicast group, provided that another client has already joined that multicast.DClient resumes multicast after association with AP2, because multicast information is sent in mobility exchanges and AP2 is already a member of the multicast group, regardless if any other clients have already joined that multicast.