A new switch is being installed and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this?（）A、You must set each end of the trunk line to IEEE 802.1e encapsulation.B、You must set the same VTP management domain name on both switches.C、You must set all ports on the two switches as access ports.D、You must configure one of the switches as a VTP server.E、You must use a rollover cable to connect the two switches.
A new switch is being installed and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this?（）
- A、You must set each end of the trunk line to IEEE 802.1e encapsulation.
- B、You must set the same VTP management domain name on both switches.
- C、You must set all ports on the two switches as access ports.
- D、You must configure one of the switches as a VTP server.
- E、You must use a rollover cable to connect the two switches.
相关考题：
It is reported that many a new house at present in the disater area. ( )A. are being builtB. were being builtC. was being builtD. is being built
A new Ezonexam switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?A．All defined VLANs are allowed on the trunk by default.B．Each VLAN, or VLAN range, that is specified with the switchport mode command.C．Each VLAN, or VLAN range, that is specified with the vtp domain command.D．Each VLAN, or VLAN range, that is specified with the vlan database command.E．None of the above
A new switch is being installed in the Ezonexam network and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this? (Choose all that apply).A．You must set each end of the trunk line to IEEE 802.1e encapsulation.B．You must set the same VTP management domain name on both switches.C．You must set all ports on the two switches as access ports.D．You must configure one of the switches as a VTP server.E．You must use a rollover cable to connect the two switches.
Youupdatedtheresourceplandirectivefortheresourceconsumergroup，DSS_USERS.TheresourceplandirectiveisassignedtotheDSS_PLANbyusingthefollowingstatement：SQLEXECDBMS_RESOURCE_MANAGER.UPDATE_PLAN_DIRECTIVE（PLAN=’DSS_PLAN’，GROUP_OR_SUBPLAN=’DSS_USERS’，NEW_CPU_P1=80，NEW_SWITCH_GROUP=’CANCEL_SQL’，NEW_SWITCH_ESTIMATE=TRUE，NEW_SWITCH_TIME=600）；Auserconnectstothedatabaseandstartsanoperation.WhatistheoutcomeifOracleestimatesthattheexecutiontimeforthisoperationwillexceed600seconds？（）
A new asynchronous connection is being installed in your network. Which pair of WAN encapsulations types is suitable for asynchronous lines?() A. PPP and ATMB. PPP and SDLCC. ATM and HDLCD. SDLC and HDLC
A new switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?() A. All defined VLANs are allowed on the trunk by default.B. Each VLAN, or VLAN range, that is specified with the switchport mode command.C. Each VLAN, or VLAN range, that is specified with the vtp domain command.D. Each VLAN, or VLAN range, that is specified with the vlan database command.
A new switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?（）A、All defined VLANs are allowed on the trunk by default.B、Each VLAN, or VLAN range, that is specified with the switchport mode command.C、Each VLAN, or VLAN range, that is specified with the vtp domain command.D、Each VLAN, or VLAN range, that is specified with the vlan database command.
ISL is being configured on a Company switch. Which of the following choices are true regarding the ISL protocol？ （）A、 It can be used between Cisco and non-Cisco switch devices.B、 It calculates a new CRC field on top of the existing CRC field.C、 It adds 4 bytes of protocol-specific information to the original Ethernet frame.D、 It adds 30 bytes of protocol-specific information to the original Ethernet frame.
You have just purchased a new Cisco 3560 switch running the enhanced IOS and need configure it to be installed in a high availability network. On a 3560 EMI switch， which three types of interfaces can be used to configure HSRP？（）A、 SVI interfaceB、 Access portC、 EtherChannel port channelD、 Loopback interfaceE、 Routed portF、 BVI interface
A cisco wcs version 4.0 has been installed on a server with a dual pentium 3.0 ghz processor，4 gb ram，and an 80 gb hard drive. a location appliance has been incorporated into the network and is being monitored by the cisco wcs. there are 3000 devices to be tracked but not all of them are being tracked on the cisco wcs. What can be done to correct the problem？（）A、add a new location appliance.B、add a new cisco wcs server dedicated to the location appliance.C、add 4 gb of ram to the cisco wcs.D、add a 120 gb hard drive to the cisco wcs.
A new switch is installed in the Testking network. This switch is to be configured sothat VLAN information will be automatically distributed to all the other Cisco Catalyst switches in the network. Which of the conditions below have to be met in order for this to occur?（）A、The switch that will share the VLAN information must be in the VTP Server mode.B、The switches must be in the same VTP domain.C、The switch that will share the VLAN information must be configured as the root bridge.D、The switches must be configured to use the same VTP version.E、The switches must be configured to use the same STP version.F、The switches must be configured to use the same type of ID tagging.G、The switches must be connected over VLAN trunks.
A technician has just installed a new power supply into a desktop computer and now the computer will not turn on. Which of the following is the MOST likely cause?（）A、The voltage selector switch on the power supply is set incorrectly.B、The 3.3v power line is connected to the wrong input on the motherboard.C、The new power supply voltage rating is too high.D、The 12v power cord is installed incorrectly.
A technician needs to install additional access points for a new high speed connection being added in the new office space. Which of the following will MOST likely be installed to allow additional CAT5 cable connections?（）A、Smart JackB、DemarcC、110 BlockD、66 Block
When using a mksysb and base media to clone a system， which of the following will cause the installation to fail（）A、mksysb made on a single processor machine but is being installed on a multiple processor machine， no editing of the image.data fileB、mksysb made on machine with mirrored rootvg and new machine only has one disk in rootvg， no editing of the image.data fileC、mksysb made on a machine with 32GB of RAM but being installed on a machine with only 8GB of RAMD、mksysb made on a machine with virtual Ethernet adapter but being installed on a machine which only has a physical Ethernet adapter
What is a design consideration when using existing PCIe I/O drawers in a maximum bandwidth/throughput configuration on a new Power 750 system?（）A、The new system requires 1 installed processor card for the GX++ bus adapterB、The new system requires a minimum of 2 installed processor cards for the GX++ bus adapterC、The new system requires a minimum of 3 installed processor cards and the HPC InfiniBand cluster adapterD、The new system requires 1 installed processor card for the GX++ bus adapter and the HPC InfiniBand cluster adapter
单选题What is a design consideration when using existing PCIe I/O drawers in a maximum bandwidth/throughput configuration on a new Power 750 system?（）AThe new system requires 1 installed processor card for the GX++ bus adapterBThe new system requires a minimum of 2 installed processor cards for the GX++ bus adapterCThe new system requires a minimum of 3 installed processor cards and the HPC InfiniBand cluster adapterDThe new system requires 1 installed processor card for the GX++ bus adapter and the HPC InfiniBand cluster adapter
单选题A technician needs to install additional access points for a new high speed connection being added in the new office space. Which of the following will MOST likely be installed to allow additional CAT5 cable connections?（）ASmart JackBDemarcC110 BlockD66 Block
单选题You are planning a new VLAN-based network solution. What is one item you should consider when creating your implementation plan as it concerns VLANs？（）Ageneric router and switch configuration parametersBend-to-end test plan after all components have been installed and configuredCadministrator assignmentsDrollback plan
问答题Write a memo in about 50 words. You are a department manager. A new copying machine has been installed in your department. Write a memo to tell your staff members to be careful in using the newly-installed photocopier. Your instructions should include the following particulars: ·Ask them not to use it for too long at a time. ·Ask them to switch off the machine after use. ·Encourage them to offer suggestions for the care of the machine.
单选题An administrator wants to rackmount a new server. Power and network outlets are available and cooling in the room is adequate to support the additional server. The new server is identical to the other servers already installed. Which of the following items should the administrator FIRST verify before installing the server？（）AHBA is compatible with the SAN fiber switch.BUpdate the newly installed server with the latest KVM drivers.CThe UPS will continue to perform as expected with the additional load.DVerify the server NIC is compatible with the NAS.
单选题A new asynchronous connection is being installed in your network. Which pair of WAN encapsulations types is suitable for asynchronous lines?（）APPP and ATMBPPP and SDLCCATM and HDLCDSDLC and HDLC
多选题ISL is being configured on a Company switch. Which of the following choices are true regarding the ISL protocol？ （）AIt can be used between Cisco and non-Cisco switch devices.BIt calculates a new CRC field on top of the existing CRC field.CIt adds 4 bytes of protocol-specific information to the original Ethernet frame.DIt adds 30 bytes of protocol-specific information to the original Ethernet frame.
单选题The network is being flooded with invalid Layer 2 addresses， causing switch CAM tables to befilled and forcing unicast traffic to be transmitted out all switch ports. Which type of Layer 2 attackis being used here？（）AMAC spoofingBVLAN hoppingCMAC address floodingDDHCP floodingESession hijacking
单选题A technician has just installed a new power supply into a desktop computer and now the computer will not turn on. Which of the following is the MOST likely cause?（）AThe voltage selector switch on the power supply is set incorrectly.BThe 3.3v power line is connected to the wrong input on the motherboard.CThe new power supply voltage rating is too high.DThe 12v power cord is installed incorrectly.
单选题A network technician is installing a new managed 10/100 Mbps switch on the network. The network has an older printer with a 10Mbps network adapter that will be moved to the new switch. Which of the following settings on the switch will need to be configured to support the printer?（）AMAC filteringBIP addressCPoEDPort speed
多选题You have just purchased a new Cisco 3560 switch running the enhanced IOS and need configure it to be installed in a high availability network. On a 3560 EMI switch， which three types of interfaces can be used to configure HSRP？（）ASVI interfaceBAccess portCEtherChannel port channelDLoopback interfaceERouted portFBVI interface