单选题Your company has an IPv4 Ethernet network.A router named R1 connects your segment to the Internet. A router named R2 joins your subnet with a segment named Private1. The Private1 segment has a network address of 10.128.4.0/26. Your computer named WKS1 requires access to servers on the Private1 network. The WKS1 computer configuration is as shown in the following table. Network Addresses IPv4 Address 10.128.64.113 Subnet mask 255.255.252.0 Default Gateway 10.128.64.1 The routers are configured as shown in the following table. Router ID Addresses R1 interface 1 R1 interface 2 (To Internet) 10.128.64.1 131.107.108.37 R2 interface 1 R2 interface 2 10.128.64.10 10.128.4.1 WKS1 is unable to connect to the Private1 network by using the current configuration.You need to add a persistent route for the Private1 network to the routing table on WKS1. Which command should you run on WKS1？（）ARoute add -p 10.128.4.0/22 10.128.4.1BRoute add p 10.128.4.0/26 10.128.64.10CRoute add p 10.128.4.0 mask 255.255.255.192 10.128.64.1DRoute add p 10.128.64.10 mask 255.255.255.192 10.128.4.0

Our long _________ with your company has brought great benefits.AimplicationBresistanceCassociationDsubstance

查看答案

You are trying to connect directly into the LAN prot of a Ezonexam router. You want to telnet to the local Cisco router using TCP/IP but cannot create a session.What should you do to resolve the problem?A. Use a straight-through cable to connect your computer's COM port to the router's console port.B. Use a crossover cable to connect your computer's COM port to the router's console port.C. Use a straight-through cable to connect your computer's COM port to the router's Ethernet port.D. Use a crossover cable to connect your computer's Ethernet port to the router's Ethernet port.E. Use a rollover cable to connect your computer's Ethernet port to the router's Ethernet port.F. Use a straight-through cable to connect your computer's Ethernet port to the router's Ethernet port.G. None of the above

查看答案

Router R1 has been configured with the redistribute ospf 1 route - map fred command under router eigrp 1. The route map named fred needs to be configured to match routes to d etermine which routes are redistributed into EIGRP.Which of the following answers lists an item that cannot be matched by route map fred?（）A. Subnet numberB. Next - hop router IP address of the routeC. Whether the route is an E1 or E2 routeD. The ro ute‘s tagE. The number of router hops between the router and the subnet

查看答案

Refer to the exhibit. Network 10.0.0.0／8 is being advertised to autonomous system 65550 via both external links. Which statement about the preferred path to the 10.0.0.0／8 network is true? () A. Router R2 will be preferred because it has the higher neighbor IP address.B. Router R2 will be preferr ed because its neighbor has a lower autonomous system number.C. Router R1 will be preferred because it has a lower local preference.D. Router R2 will be preferred because it has a higher local preference.E. Router R1 will be preferred because its nei ghbor has the higher autonomous system number.F. Router R1 will be preferred because it has the lower neighbor IP address.

查看答案

You administer a network that uses two routers， R1 and R2， configured as an HSRP group to provide redundancy for the gateway. Router R1 is the active router and has been configured as follows： R1#configure terminal R1（config）#interface fa0/0 R1（config-if）#ip address 10.10.0.5 255.255.255.0 R1（config-if）#standby 1 priority 150 R1（config-if）#standby preempt delay minimum 50 R1（config-if）#standby 1 track interface fa0/2 15 R1（config-if）#standby 1 ip 10.10.0.20 Which of the following describes the effect the standby preempt delay minimum 50 command will have on router R1？（）A、 The HSRP priority for router R1 will increase to 200.B、 Router R1 will become the standby router if the priority drops below 50.C、 The HSRP priority for router R1 will decrease to 50 points when Fa0/2 goes down. D、 Router R1 will wait 50 seconds before attempting to preempt the active router.

查看答案

Router R1 has been configured with the redistribute ospf 1 route - map fred command under router eigrp 1. The route map named fred needs to be configured to match routes to d etermine which routes are redistributed into EIGRP. Which of the following answers lists an item that cannot be matched by route map fred?（）A、Subnet numberB、Next - hop router IP address of the routeC、Whether the route is an E1 or E2 routeD、The ro ute's tagE、The number of router hops between the router and the subnet

查看答案

You have just completed an OSPF implementation. While executing your verification plan, you determine that R1 is not able to establish full OSPF adjacency with R2. The show ip ospf neighbor comman d output on R1 shows that R2 is stuck in the INIT state. What could be the cause of this problem?（）A、DR and BDR election errors between R1 and R2.B、The R2 router has not received the OSPF hello packets from the R1 router.C、Mismatched interface ma ximum transmission unit (MTU) configuration between the R1 and R2.D、Mismatched OSPF hello interval configuration between the R1 and R2E、Corrupted LSAs exchanges between the R1 and R2.

查看答案

Router R1 exists in an Enterprise that uses EIGRP as its routing protocol. The show ip route command output on router R1 lists the following phrase: "Gateway of last resort is 1.1.1.1 to network 2.0.0.0". Whic h of the following is most likely to have caused this output to occur on R1?（）A、R1 has been configured with an ip default- network 2.0.0.0 command.B、R1 has been configured with an ip route 0.0.0.0 0.0.0.0 1.1.1.1 command.C、R1 has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.D、Another router has been configured with an ip default - network 2.0.0.0 command.E、Another router has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.

查看答案

A problem was reported that the 10.10.10.0/24 prefix was not injected into the local BGP table ona Company router named R1. The following information is available from this router： R1 Configuration： router bgp 65001 network 10.0.0.0 neighbor 172.16.1.1 remote-as 65002 no auto-summary Routing table information： show ip route | include 10 O 10.10.10.0/24 [110/11] via 192.168.1.1， 2d00h， Ethernet0/0 Why is this prefix not in the local BGP table of the R1？（）A、The 172.16.1.1 neighbor is down.B、The prefix 10.10.10.0/24 is not a ’connected’ routeC、This route is not a BGP learned routeD、The network command is wrongE、None of the other alternatives apply

查看答案

Your company has an IPv4 Ethernet network.A router named R1 connects your segment to the Internet. A router named R2 joins your subnet with a segment named Private1. The Private1 segment has a network address of 10.128.4.0/26. Your computer named WKS1 requires access to servers on the Private1 network. The WKS1 computer configuration is as shown in the following table. Network Addresses IPv4 Address 10.128.64.113 Subnet mask 255.255.252.0 Default Gateway 10.128.64.1 The routers are configured as shown in the following table. Router ID Addresses R1 interface 1 R1 interface 2 (To Internet) 10.128.64.1 131.107.108.37 R2 interface 1 R2 interface 2 10.128.64.10 10.128.4.1 WKS1 is unable to connect to the Private1 network by using the current configuration.You need to add a persistent route for the Private1 network to the routing table on WKS1. Which command should you run on WKS1？（）A、Route add -p 10.128.4.0/22 10.128.4.1B、Route add p 10.128.4.0/26 10.128.64.10C、Route add p 10.128.4.0 mask 255.255.255.192 10.128.64.1D、Route add p 10.128.64.10 mask 255.255.255.192 10.128.4.0

查看答案

Your company has a server named Server1 that runs Windows Server 2008 R2. Server1 runs the DHCP Server server role and the DNS Server server role. You also have a server named ServerCore that runs a Server Core installation of Windows Server 2008 R2.All computers are configured to use only Server1 for DNS resolution. The IP address of Server1 is 192.168.0.1. The network interface on all the computers is named LAN.Server1 is temporarily offline. A new DNS server named Server2 has been configured to use the IP address 192.168.0.254.You need to configure ServerCore to use Server2 as the preferred DNS server and Server1 as the alternate DNS server.What should you do？（）A、Run the netsh interface ipv4 add dnsserver "LAN" static 192.168.0.254 index=1 command.B、Run the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.254 192.168.0.1 both command.C、Run the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.254 primary command and the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.1 both command.D、Run the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.254 primary command and the netsh interface ipv4 add dnsserver "LAN" static 192.168.0.1 index=1 command.

查看答案

Your company has an IPv4 Ethernet network. A router named R1 connects your segment to the Internet. A router named R2 joins your subnet with a segment named Private1. The Private1 segment has a network address of 10.128.4.0/26. Your computer named WKS1 requires access to servers on the Private1 network.The WKS1 computer configuration is as shown in the following table. Network Addresses IPv4 Address 10.128.64.113 Subnet mask 255.255.252.0 Default Gateway 10.128.64.1 The routers are configured as shown in the following table. Router ID Addresses R1 interface 1 R1 interface 2 (To Internet) 10.128.64.1 131.107.108.37 R2 interface 1 R2 interface 2 10.128.64.10 10.128.4.1 WKS1 is unable to connect to the Private1 network by using the current configuration.You need to add a persistent route for the Private1 network to the routing table on WKS1.Which command should you run on WKS1？（）A、Route add -p 10.128.4.0/22 10.128.4.1B、Route add p 10.128.4.0/26 10.128.64.10C、Route add p 10.128.4.0 mask 255.255.255.192 10.128.64.1D、Route add p 10.128.64.10 mask 255.255.255.192 10.128.4.0

查看答案

Your company has a server named DC1 that runs Windows Server 2008. DC1 has the DHCP server role installed. You find taht a desktop computer named SALES4 is unable to obtain an IP configuration from the DHCP server. You install the Microsoft Network Monitor 3.0 application on DC1. You enable P-mode in the Network Monitor application configuration. You plan to capture only the DHCP server-related traffic between DC1 and SALES4 The network interface configuration for the two computers is shown in the following table. （missing again wow）. You need to build a filter int he Network Monitor application to capture the DHCP traffic between DC1 and SALES4 Which filter should you use（）？ A、IPv4 Address == 169.254.15.84 DHCPB、IPv4 address == 192.168.2.1 DHCPC、Ethernet Address == 0x000A5E1C7F67 DHCPD、Ethernet Address == 0x001731D55EFF DHCP

查看答案

单选题Your company has just upgraded its CATAGORY 5 Ethernet network from 10Mbps to 100Mbps. After the upgrade， the 20 Windows 2000 Professional computers in the marketing department can no longer connect to the network. The remaining 80 Windows 2000 computers in the company can connect， however. Your company uses NWLink as the only network protocol.You need to connect the computers in the marketing department to the network. What must you do？（）AConfigure the NWLink frame type of the network adapters to be ethernet 802.3.BConfigure the NWLink frame type of the network adapters to be ethernet II.CReplace the network adapters with 10/100 BNC adapters.DReplace the network adapters with 10/100 UTP network adapters.

查看答案

单选题You work as the enterprise exchange administrator at Company.com.The Company.com network consists of a single Active Directory domain named Company.com.Company.com has an Exchange Server 2010 organization.the Company.com contains an exchange server 2010 client access server named -ex12.Company.com has an employee named andy booth.he uses exchange activesync to down load attachment.You have received instructions from the cio to limit andy booth’s attachments size；however your action should not in any way affect the other employees at Company.com.What should you do？（）AThe best option is to set up a new managed content setting.BThe best option is to change Andy Booth’s message size restrictions.CThe best option is to set up a new Exchange ActiveSync mailbox policy.DThe best option is to change the default Exchange ActiveSync mailbox policy.

查看答案

单选题Routers R1 and R2 are configured for HSRP as shown below： Router R1： interface ethernet 0 ip address 20.6.2.1 255.255.255.0 standby 35 ip 20.6.2.21 standby 35 priority 100 interface ethernet 1 ip address 20.6.1.1.2 255.255.255.0 standby 34 ip 20.6.1.21 Router R2： interface ethernet 0 ip address 20.6.2.2 255.255.255.0 standby 35 ip 20.6.2.21 interface ethernet 1 ip address 20.6.1.1.1 255.255.255.0 standby 34 ip 20.6.1.21 standby 34 priority 100 You have configured the routers R1 R2 with HSRP. While debugging router R2 you notice very frequent HSRP group state transitions. What is the most likely cause of this？（）A physical layer issuesB no spanning tree loopsC use of non-default HSRP timersD failure to set the command standby 35 preempt

查看答案

单选题Your company has a server named Server1 that runs Windows Server 2008. Server1 runs the DHCP server role and the DNS server role. You also have a server named ServerCore that runs a ServerCore installation of Windows Server 2008. All computers are configured to use only Server1 for DNS resolution. The IP address of Server1 is 192.168.0.1. The network interface on all the computers is named LAN. Server1 is temporarily office. A new DNS server named Server2 has been configured to use the IP address 192.168.0.254. You need to configure ServerCore to use Server2 as the preferred DNS server. What should you do？（）A Run the netsh interface ipv4 add dnsserver LAN static 192.168.0.254 index=1 commandB Run the netsh interface ipv4 set dnsserver LAN static 192.168.0.254 192.168.0.1 both commandC Run the netsh interfface ipv4 set dnsserver LAN static 192.168.0.254 primary command and the netsh interface ipv4 set dnsserver LAN static 192.168.0.1 both command.D Run the netsh interface ipv4 set dnsserver LAN static 192.168.0.254 primary command and the netsh interface ipv4 add dnsserver LAN static 192.168.0.1 index=1 command

查看答案

单选题A company has a small network，consisting of a single switch and a single router.The switch has beenconfigured with two vlans，and route-on-a-stick is being configured on the router for inter-vlan routing.Atrunk is configured to connect the switch to the router.What is the minimum number of router subinterfacesthat are required for all the vlans to communicate？（）AoneBthreeCtwoDzero

查看答案

单选题our company has a DNS server named server1. Your partner company has a DNS server named server2. You create a stub zone on server1. The master for the stub zone is server2. Serve2 fails. You discover that users are not able to resolve named for the partner company. You need to ensure that users are able to resolve named for the partner company in the event that server2 fails. What should you do?（）AChange the stub zone to a secondary zone on server1.BOpen the SOA record for the zone on server2. Change the minimum (default ) TTL setting to 12 hours.COpen the DNS zone for the partner company on server2. Create a new route through (RT) record and a new host (A) record for server1.DOpen the primary DNS zone on server2. Create a new service locator (SRV) record and a new host (A) record for server1.

查看答案

单选题Your company has an Active Directory forest. The company has three locations. Each location has an organizational unit and a child organizational unit named Sales. The Sales organizational unit contains all users and computers of the sales department. The company plans to deploy a Microsoft Office 2007 application on all computers within the three Sales organizational units. You need to ensure that the Office 2007 application is installed only on the computers in the Sales organizational units. What should you do（）ACreate a Group Policy Object （GPO） named SalesAPP GPO. Configure the GPO to assign the application to the cBCreate a Group Policy Object （GPO） named SalesAPP GPO. Configure the GPO to assign the application to the usCCreate a Group Policy Object （GPO） named SalesAPP GPO. Configure the GPO to publish the application to the uDCreate a Group Policy Object （GPO） named SalesAPP GPO. Configure the GPO to assign the application to the co

查看答案

单选题Your company has an IPv6 Ethernet network. A router named R1 connects your segment to the internet. A router named R2 joins your subnet with a segment named Private1. The Private1 segment has a network address of 10.128.4.0/26. Your computer named WKS2 required access to servers on the Private1 network. The WKS1 computer configuration in shown in the following table. （again table missing）. The routers are configured as shown in the following table. （missing too）WKS1 is unable to connect to the Private1 network by using the current configuration. You need to add a persistent route for the Private1 network to the routing table on WKS1.（）ARout add -p 10.128.4.0/22 10.128.4.1BRoute add Cp 10.128.4.0/26 10.128.64.10CRoute add Cp 10.128.4.0 mask 255.255.255.192 10.12.64.1DRoute add Cp 10.128.64.10 mask 255.255.255.192 10.128.4.0

查看答案

单选题Routers R1 and R2 are configured for HSRP as shown below： Router R1： interface ethernet 0 ip address 20.6.2.1 255.255.255.0 standby 35 ip 20.6.2.21 standby 35 priority 100 interface ethernet 1 ip address 20.6.1.1.2 255.255.255.0 standby 34 ip 20.6.1.21 Router R2： interface ethernet 0 ip address 20.6.2.2 255.255.255.0 standby 35 ip 20.6.2.21 interface ethernet 1 ip address 20.6.1.1.1 255.255.255.0 standby 34 ip 20.6.1.21 standby 34 priority 100 You have configured the routers R1 R2 with HSRP. While debugging router R2 you notice veryfrequent HSRP group state transitions. What is the most likely cause of this？（）Aphysical layer issuesBno spanning tree loopsCuse of non-default HSRP timersDfailure to set the command standby 35 preempt

查看答案

单选题your company has a server named server1 that runs a windows server 2008 core installation, and the DNS server role. Server1 has one network interface named local area connection. The static IP address of the network interface is configured as 10.0.0.1. you need to create a DNS zone named local.contoso.com on server1. Which command should you use?（）AIpconfig /registerdns: local.contoso.comBdnscmd server1 /zoneadd local.cotoso.com /DSPrimary.CDnscmd server1 /zoneadd local.contoso.com /primary /file local.contoso.com.dns.DNetsh interface ipv4 set dnsserver name=local.contoso.com static 10.0.0.1 primary.

查看答案

单选题A problem was reported that the 10.10.10.0/24 prefix was not injected into the local BGP table ona Company router named R1. The following information is available from this router： R1 Configuration： router bgp 65001 network 10.0.0.0 neighbor 172.16.1.1 remote-as 65002 no auto-summary Routing table information： show ip route | include 10 O 10.10.10.0/24 [110/11] via 192.168.1.1， 2d00h， Ethernet0/0 Why is this prefix not in the local BGP table of the R1？（）AThe 172.16.1.1 neighbor is down.BThe prefix 10.10.10.0/24 is not a ’connected’ routeCThis route is not a BGP learned routeDThe network command is wrongENone of the other alternatives apply

查看答案

单选题Your company has a server named Server1 that runs a Windows Server 2008 Core Installation， and the DNS server role. Server1 has one network interface named Local Area Connection. The static IP address of the network interface is configured as 10.0.0.1. You need to create a DNS zone named local.contoso. com on server1. Which command should you use？（）Aipconfig /registerdns：local.contoso.comBdnscmd Server1 /ZoneAdd local.contoso.com /DSPrimaryCdnscmd Server1 /ZoneAdd local.contoso.com /Primary /file local.contoso.com.dnsDnetsh interface ipv4 set dnsserver name=local.contoso.com static 10.0.0.1 primary

查看答案

单选题2012 Feb 23 23：00：08.676710 pim： [16132] （default-base） Received unauthenticated hello- message from 10.1.1.2 on Ethernet1/18， message discarded 2012 Feb 23 23：00：12.528763 pim： [16132] （default-base） Send Hello with AH on Ethernet1/18 from 10.1.1.1， holdtimE. 105 secs，dr-priority：1 You are troubleshooting a PIM neighbor adjacency that is not coming up. You issued the command show ip pim neighbor e1/18 and confirmed there is no PIM neighbor on the interface. What is the problem based on the debug output？（）A The peer router 10.1.1.2 has PIM disabled on its interface connecting to Ethernet1/18.B The peer router 10.1.1.2 has the wrong PIM password configured on its interface connecting to Ethernet1/18.C The local router 10.1.1.1 has the wrong PIM password configured on Ethernet1/18.D The peer router 10.1.1.2 does not have PIM hello authentication enabled on its interface connecting to Ethernet1/18.E The local router 10.1.1.1 does not have PIM hello authentication enabled for Ethernet1/18.

查看答案

单选题Router R1 exists in an Enterprise that uses EIGRP as its routing protocol. The show ip route command output on router R1 lists the following phrase: "Gateway of last resort is 1.1.1.1 to network 2.0.0.0". Whic h of the following is most likely to have caused this output to occur on R1?（）AR1 has been configured with an ip default- network 2.0.0.0 command.BR1 has been configured with an ip route 0.0.0.0 0.0.0.0 1.1.1.1 command.CR1 has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.DAnother router has been configured with an ip default - network 2.0.0.0 command.EAnother router has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.

查看答案

单选题Router R1 has been configured with the redistribute ospf 1 route - map fred command under router eigrp 1. The route map named fred needs to be configured to match routes to d etermine which routes are redistributed into EIGRP. Which of the following answers lists an item that cannot be matched by route map fred?（）ASubnet numberBNext - hop router IP address of the routeCWhether the route is an E1 or E2 routeDThe ro ute's tagEThe number of router hops between the router and the subnet

查看答案

51题库考试学习网

51tk.com

参考解析

相关考题：