单选题Your company has a server named Server1 that runs a Windows Server 2008 Core Installation， and the DNS server role. Server1 has one network interface named Local Area Connection. The static IP address of the network interface is configured as 10.0.0.1. You need to create a DNS zone named local.contoso. com on server1. Which command should you use？（）Aipconfig /registerdns：local.contoso.comBdnscmd Server1 /ZoneAdd local.contoso.com /DSPrimaryCdnscmd Server1 /ZoneAdd local.contoso.com /Primary /file local.contoso.com.dnsDnetsh interface ipv4 set dnsserver name=local.contoso.com static 10.0.0.1 primary
单选题
Your company has a server named Server1 that runs a Windows Server 2008 Core Installation， and the DNS server role. Server1 has one network interface named Local Area Connection. The static IP address of the network interface is configured as 10.0.0.1. You need to create a DNS zone named local.contoso. com on server1. Which command should you use？（）
A
ipconfig /registerdns：local.contoso.com
B
dnscmd Server1 /ZoneAdd local.contoso.com /DSPrimary
C
dnscmd Server1 /ZoneAdd local.contoso.com /Primary /file local.contoso.com.dns
D
netsh interface ipv4 set dnsserver name=local.contoso.com static 10.0.0.1 primary
参考解析
解析：
暂无解析
相关考题：
Your company has a server named Server1 that runs Windows Server 2008 R2. The Windows Server Backup feature is installed on Server1.Server1 fails. You install a new server named Server2 that runs Windows Server 2008 R2.You need to restore the company Windows SharePoint Services (WSS) site to Server2.What should you do?（）A. Use Wbadmin to restore the system state from backup.B. Run Wbadmin with the Get Versions option. Install WSS.C. Run Wbadmin with the Start Recovery option. Install WSS.D. Use Wbadmin to restore the application and the sites from backup.
Your company has a domain controller named Server1 that runs Windows Server 2008 R2. Server1 has the DNS Server server role installed.You need to configure the DNS server to resolve IP addresses to host names.Which record should you create？（）A. Pointer (PTR)B. Host Info (HINFO)C. Service Location (SRV)D. Canonical Name (CNAME)
Your company has a domain controller named Server1 that runs Windows Server 2008 R2 and the DNS Server server role. A server named Server2 runs a custom application.You need to configure DNS to include the following parameters for the custom application: Service Priority Weight Protocol Port number Host offering this service Which record should you create？（）A. Host Info (HINFO)B. Service Location (SRV)C. Canonical Name (CNAME)D. Well-Known Service (WKS)
Your company has a domain controller named Server1 that runs Windows Server 2008 and the DNS server role. A server named Server2 runs a custom application. You need to configure DNS to include the following parameters for the custom application： Service Priority Weight Protocol Port Number Host offering this service Which record should you create？（）A、 Host Info （HINFO）B、 Service Locator （SRV）C、 Canonical Name （CNAME）D、 Well-Known Service （WKS）
Your company has a server named Server1 that runs Windows Server 2008 R2. Server1 runs the DHCP Server server role and the DNS Server server role. You also have a server named ServerCore that runs a Server Core installation of Windows Server 2008 R2. All computers are configured to use only Server1 for DNS resolution. The IP address of Server1 is 192.168.0.1. The network interface on all the computers is named LAN. Server1 is temporarily offline. A new DNS server named Server2 has been configured to use the IP address 192.168.0.254.You need to configure ServerCore to use Server2 as the preferred DNS server and Server1 as the alternate DNS server. What should you do？（）A、Run the netsh interface ipv4 add dnsserver "LAN" static 192.168.0.254 index=1 command.B、Run the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.254 192.168.0.1 both command.C、Run the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.254 primary command and the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.1 both command.D、Run the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.254 primary command and the netsh interface ipv4 add dnsserver "LAN" static 192.168.0.1 index=1 command.
Your company has a server named Server1 that runs Windows Server 2008 R2. Server1 runs the DHCP Server server role and the DNS Server server role. You also have a server named ServerCore that runs a Server Core installation of Windows Server 2008 R2.All computers are configured to use only Server1 for DNS resolution. The IP address of Server1 is 192.168.0.1. The network interface on all the computers is named LAN.Server1 is temporarily offline. A new DNS server named Server2 has been configured to use the IP address 192.168.0.254.You need to configure ServerCore to use Server2 as the preferred DNS server and Server1 as the alternate DNS server.What should you do？（）A、Run the netsh interface ipv4 add dnsserver "LAN" static 192.168.0.254 index=1 command.B、Run the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.254 192.168.0.1 both command.C、Run the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.254 primary command and the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.1 both command.D、Run the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.254 primary command and the netsh interface ipv4 add dnsserver "LAN" static 192.168.0.1 index=1 command.
Your company has a server named Server1 that runs a Server Core installation of Windows Server 2008， and the DNS Server server role. Server1 has one network interface named Local Area Connection. The static IP address of the network interface is configured as 10.0.0.1. You need to create a DNS zone named local.contoso.com on Server1. Which command should you use？（）A、ipconfig /registerdns：local.contoso.comB、dnscmd Server1 /ZoneAdd local.contoso.com /DSPrimaryC、dnscmd Server1 /ZoneAdd local.contoso.com /Primary /file local.contoso.com.dnsD、netsh interface ip v4 set dnsserver name= local.contoso.com static 10.0.0.1 primary
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. Server1 runs Windows Server 2012 R2. Server2 runs Windows Server 2008 R2 Service Pack 1 （SP1） and has the DHCP Server server role installed. You need to manage DHCP on Server2 by using the DHCP console on Server1. What should you do first？（）A、From Windows Firewall with Advanced Security on Server2， create an inbound ruleB、From Internet Explorer on Server2， download and install Windows Management Framework 3.0.C、From Server Manager on Server1， install a featureD、From Windows PowerShell on Server2， run Enable PSRemoting
Your company has a server named Server1 that runs Windows Server 2008. The Windows Backup and Restore utility is installed on Server1. Server1 fails. You install a new server named Server2 that runs Windows Server 2008. You need to restore the companys Windows SharePoint Services （WSS） site to Server2 What should you do？（）A、 Use Wbadmin to restore the system state from backupB、 Run Wbadmin with the Get Versions option. Install WSSC、 Run Wbadmin with the Start Recovery option. Install WSSD、 Use Wbadmin to restore the application and the sites from backup
Your company has a server named Server1 that runs Windows Server 2008. Server1 is a Windows ServerUpdate Services (WSUS) server. You have a computer named Computer1 that runs Windows 7. Computer1 is configured to obtain updates from Server1. You open the WSUS snap-in on Server1 and discover that Computer1 does not appear. You need to ensure that Computer1 appears in the WSUS snap-in. What should you do?（）A、On Server1， open Windows Update then select Check for updates.B、On Server1， run Wsusutil.exe and specify the /import parameter.C、On Computer1， open Windows Update and then select Change settings.D、On Computer1， run Wuauclt.exe and specify the /detectnow parameter.
Your company ahs an active direcotyr domain. The company also has a server named Server1 that runs Windows Server 2008. You install the file server role on Server1. you create a shared folder named AcctgShare on Server1 The permissions for the shared folder are configured as shown in the following table. （ missing again!） You need to ensure members of the Managers group can only view and open files in the shared folder. What should you do（）？ A、Modify the share permissions for the Managers group to ReaderB、Modify the share permisisons for the Accounting Users group to ContributorC、Modify the NTFS permisisons for the Managers group to ModifyD、Modify the NTFS permissions for the authenticated users group to modify and the share permissions to contributer.
单选题Your company has a server named Server1 that runs Windows Server 2008 R2. The Windows Server Backup feature is installed on Server1.Server1 fails. You install a new server named Server2 that runs Windows Server 2008 R2.You need to restore the companys Windows SharePoint Services (WSS) site to Server2.What should you do？（）AUse Wbadmin to restore the system state from backup.BRun Wbadmin with the Get Versions option. Install WSS.CRun Wbadmin with the Start Recovery option. Install WSS.DUse Wbadmin to restore the application and the sites from backup.
单选题Your company runs Windows Server Update Services (WSUS) on a server named Server1. Server1runs Windows Server 2008 R2. Server1 is located on the company intranet. You configure the WSUS Web site to use SSL. You need to configure a Group Policy object (GPO) to specify the intranet update locations. Which URLs should you use?（）Ahttp: //SERVER1Bhttp: //SERVER1:8080Chttps: //SERVER1Dhttps: //SERVER1:8080
单选题Your company has a server named Server1 that runs Windows Server 2008. Server1 runs the DHCP server role and the DNS server role. You also have a server named ServerCore that runs a ServerCore installation of Windows Server 2008. All computers are configured to use only Server1 for DNS resolution. The IP address of Server1 is 192.168.0.1. The network interface on all the computers is named LAN. Server1 is temporarily office. A new DNS server named Server2 has been configured to use the IP address 192.168.0.254. You need to configure ServerCore to use Server2 as the preferred DNS server. What should you do？（）A Run the netsh interface ipv4 add dnsserver LAN static 192.168.0.254 index=1 commandB Run the netsh interface ipv4 set dnsserver LAN static 192.168.0.254 192.168.0.1 both commandC Run the netsh interfface ipv4 set dnsserver LAN static 192.168.0.254 primary command and the netsh interface ipv4 set dnsserver LAN static 192.168.0.1 both command.D Run the netsh interface ipv4 set dnsserver LAN static 192.168.0.254 primary command and the netsh interface ipv4 add dnsserver LAN static 192.168.0.1 index=1 command
单选题Your company has a server named Server1 that runs Windows Server 2008. Server1 is a Windows ServerUpdate Services (WSUS) server. You have a computer named Computer1 that runs Windows 7. Computer1 is configured to obtain updates from Server1. You open the WSUS snap-in on Server1 and discover that Computer1 does not appear. You need to ensure that Computer1 appears in the WSUS snap-in. What should you do?（）AOn Server1， open Windows Update then select Check for updates.BOn Server1， run Wsusutil.exe and specify the /import parameter.COn Computer1， open Windows Update and then select Change settings.DOn Computer1， run Wuauclt.exe and specify the /detectnow parameter.
单选题Your company runs Windows Server Update Services (WSUS) on a server named Server1. Server1 runs Windows Server 2008 R2. Server1 is located on the company intranet.You configure the WSUS Web site to use SSL.You need to configure a Group Policy object (GPO) to specify the intranet update locations.Which URLs should you use？（）Ahttp: //SERVER1Bhttp: //SERVER1:8080Chttps: //SERVER1Dhttps: //SERVER1:8080
单选题Your company has a server named Server1 that runs Windows Server 2008. The Windows Backup and Restore utility is installed on Server1. Server1 fails. You install a new server named Server2 that runs Windows Server 2008. You need to restore the companys Windows SharePoint Services （WSS） site to Server2 What should you do？（）A Use Wbadmin to restore the system state from backupB Run Wbadmin with the Get Versions option. Install WSSC Run Wbadmin with the Start Recovery option. Install WSSD Use Wbadmin to restore the application and the sites from backup
单选题Your company has a domain controller named Server1 that runs Windows Server 2008 R2.Server1 has the DNS Server server role installed.You need to configure the DNS server to resolve IP addresses to host names.Which record should you create？（）APointer (PTR)BHost Info (HINFO)CService Location (SRV)DCanonical Name (CNAME)
多选题Your company has a server named Server1 that runs Windows Server 2008 and Microsoft Hyper-V. Server1 hosts three virtual machines. Company policy states that the virtual machines must not connect to the company network. You need to configure all of the virtual machines to connect to each other. You must meet the company policy. Which two actions should you perform？（）ASelect the Not connected option for each virtual machine.BEnable the Enable virtual LAN identification option for each virtual machine.CSet the Connection to Host for the network interface card.DSet the Connection to None for the network interface card.
单选题Your network consists of a single Active Directory domain named Contoso.com. The domain contains a member server named Server1. Server1 runs Windows Server 2003 Service Pack 2 （SP2）. Server1 has Windows Support Tools and Resource Kit Tools installed. You need to view the Kerberos tickets issued to Server1. Which tool should you run？（）AKerbtrayBSc/query kdcCNetdiag/test：KerberosDNltest/sc_query：Contoso.com
单选题your company has a server named server1 that runs a windows server 2008 core installation, and the DNS server role. Server1 has one network interface named local area connection. The static IP address of the network interface is configured as 10.0.0.1. you need to create a DNS zone named local.contoso.com on server1. Which command should you use?（）AIpconfig /registerdns: local.contoso.comBdnscmd server1 /zoneadd local.cotoso.com /DSPrimary.CDnscmd server1 /zoneadd local.contoso.com /primary /file local.contoso.com.dns.DNetsh interface ipv4 set dnsserver name=local.contoso.com static 10.0.0.1 primary.
单选题Your company has a domain controller named Server1 that runs Windows Server 2008 R2. Server1 has the DNS Server server role installed.You need to configure the DNS server to resolve IP addresses to host names. Which record should you create？（）APointer (PTR)BHost Info (HINFO)CService Location (SRV)DCanonical Name (CNAME)
单选题Your company has a server named Server1 that runs Windows Server 2008 R2. The Windows Server Backup feature is installed on Server1.Server1 fails. You install a new server named Server2 that runs Windows Server 2008 R2.You need to restore the companyˉ Windows SharePoint Services (WSS) site to Server2. What should you do?（）AUse Wbadmin to restore the system state from backup.BRun Wbadmin with the Get Versions option. Install WSS.CRun Wbadmin with the Start Recovery option. Install WSS.DUse Wbadmin to restore the application and the sites from backup.
单选题Your company has a domain controller named Server1 that runs Windows Server 2008 R2 and the DNS Server server role. A server named Server2 runs a custom application. You need to configure DNS to include the following parameters for the custom application: ?¤Servic ?¤Priorit ?¤Weigh ?¤Protoco ?¤Port numbe ?¤Host offering this servic Which record should you create？（）AHost Info (HINFO)BService Location (SRV)CCanonical Name (CNAME)DWell-Known Service (WKS)
单选题Your company has a domain controller named Server1 that runs Windows Server 2008 and the DNS server role. A server named Server2 runs a custom application. You need to configure DNS to include the following parameters for the custom application： Service Priority Weight Protocol Port Number Host offering this service Which record should you create？（）A Host Info （HINFO）B Service Locator （SRV）C Canonical Name （CNAME）D Well-Known Service （WKS）