Refer to the exhibit. A client has asked you to consult on an eBGP loading question. Currently the AS 100 eBGP links have an average outbound load of 65% and 20% respectively. On further investigation, traffic from 10.10.24.0 accounts for 45%, and 10.10.25.0 and 10.10.32.0 accounts for 20% each of the outbound load. The customer wants to spread the load between the two eBGP links more evenly. The BGP attributes are currently set at their default values. If you are located at AS 100 and want to influence how AS 100 sends traffic to AS 200, what BGP attribute could you configure to cause AS 100 outbound traffic to load the eB GP links more evenly? （）A. On router A, set the default local - preference to 50.B. On router B, set the default metric to 150.C. On router B, configure a route map for 10.10.25.0/24 with a local preference of 150 linked to neighbor 192.168.30.2.D. On router B, set the default local -preference to 150.
Refer to the exhibit. A client has asked you to consult on an eBGP loading question. Currently the AS 100 eBGP links have an average outbound load of 65% and 20% respectively. On further investigation, traffic from 10.10.24.0 accounts for 45%, and 10.10.25.0 and 10.10.32.0 accounts for 20% each of the outbound load. The customer wants to spread the load between the two eBGP links more evenly. The BGP attributes are currently set at their default values. If you are located at AS 100 and want to influence how AS 100 sends traffic to AS 200, what BGP attribute could you configure to cause AS 100 outbound traffic to load the eB GP links more evenly? （）
A. On router A, set the default local - preference to 50.
B. On router B, set the default metric to 150.
C. On router B, configure a route map for 10.10.25.0/24 with a local preference of 150 linked to neighbor 192.168.30.2.
D. On router B, set the default local -preference to 150.
相关考题：
Certkiller .com has asked you to create a file management application to monitor the hosts file.Certkiller .com has instructed you to change the hosts file if it has been changed.You, therefore, need to display the size and whether the hosts file is set to read-only.What should you do?（）A.B.C.D.
Certkiller .com has asked you to develop an application that displays the properties for all Certkiller.com‘s network drives.The information generated by this application will be utilized by Certkiller .com‘s network administrators to verify client setups.You need to ensure that these requirements are fully satisfied.What should you do?（）A.B.C.D.
Refer to the exhibit. This shows the NetFlow statistics for a router. You are analyzing the traffic pattern and you are interested in the percentage of packets between 32 and 64 bytes in size and the number of flows in progress. Which of these identifies both numbers correctly?（）A. 69.4%, 4061B. 24.9%, 980C. 69.4%, 35D. 6.94%, 980E. cannot be determined from this output
Refer to the exhibit. Router RTA has been configured as a DHCP server. The two debug commands will generate output on RTA when Ho st A requests an IP address. Which set of DHCPD debug messages is in the correct sequence?（）A.DHCPD: Sending DHCPOFFER to client DHCPD: DHCPDISCOVER received from client DHCPD: DHCPREQUEST received from client DHCPD: Sending DHCPACK to clientB.DH CPD: DHCPDISCOVER received from client DHCPD: DHCPREQUEST received from client DHCPD: Sending DHCPOFFER to client DHCPD: Sending DHCPACK to clientC.DHCPD: DHCPDISCOVER received from client DHCPD: Sending DHCPOFFER to client DHCPD: DHCPREQUEST received from client DHCPD: Sending DHCPACK to clientD.DHCPD: DHCPREQUEST received from client DHCPD: Sending DHCPOFFER to client DHCPD: DHCPDISCOVER received from client DHCPD: Sending DHCPACK to clientE.DHCPD: Sending DHCPACK to client DHCPD: DHCPD ISCOVER received from client DHCPD: Sending DHCPOFFER to client DHCPD: DHCPREQUEST received from clientF.DHCPD: DHCPDISCOVER received from client DHCPD: Sending DHCPACK to client DHCPD: Sending DHCPOFFER to client DHCPD: DHCPREQUEST received from client
Refer to the exhibit. Currently the two eBGP links between AS100 and AS200 have an average inbound load of 65% and 20% respectively. After further investigation, traffic to 10.10.1.16/28 accounts for 45%, and t raffic to 10.10.1.32/28 and to 10.10.1.48/28 each account for 20% of the inbound load. The BGP attributes are currently set at their default values in both autonomous systems. If you want to influence how AS200 sends traffic to AS100, which eBGP configu rations would you configure in AS100 to influence AS200 to use the eBGP links more evenly?（）A. neighbor 192.168.30.2 route - map as_50 outB. neighbor 192.168.20.2 route - map as_50 outC. route - map as_50 permit 10 match ip address 50 set metric 150 a ccess - list 50 permit 10.10.1.16 0.0.0.240D. route - map as_50 permit 10 match ip address 50 set metric 150 access - list 50 permit 10.10.1.32 0.0.0.240
Refer to the exhibit. R1 accesses the Internet using E0/0. You have been asked to co nfigure R1 so that a default route is generated to its downstream devices (191.0.0.1 and 192.0.0.1). Which commands would create this configuration? （）A.router eigrp 190redistribute static ! ip route 0.0.0.0 0.0.0.0 Null0B.ip default - network 2 0.0.0.0C.router eigrp 190 redistribute static ! ip route 0.0.0.0 255.255.255.255 Null0D.ip default - network 20.20.20.0
Refer to the exhibit. You want to use all the routes in the EIGRP topology for IP load balancing. Which two EIGRP subcommands wou ld you use to accomplish this goal?() A. traffic - share balancedB. distanceC. maximum- pathsD. default - networkE. variance
Refer to the exhibit. OSPF is running throughout the network. You want to minimize the propagation of LSAs into and out of A rea 1. Which OSPF feature would best achieve this goal? () A. stubB. totally stubbyC. NSSAD. totally NSSA
Refer to the exhibit. You have completed an OSPF implementation, and you are verifying OSPF operation. You notice that router A and router B are stuck in the two - way state. From the show ip ospf interface command output, what is the cause of this issue?（）A. All OSPF implementations must have at le ast one interface in area 0.B. You are attempting to run in the broadcast mode over an NBMA interface.C. Both routers are configured to function as a BDR; therefore, there is no DR router.D. Someone has changed the OSPF router ID; therefore you must clear the OSPF process.E. The OSPF priority is set to 0 on both routers; therefore neither can become the DR.
Refer to the exhibit. ROUTE.com has just implemented this EIGRP network. A network administrator came to you for advice while trying to implement load balancing across part of their EIGRP network. If the variance value is configured as 2 on all routers and all o ther metric and K values are configured to their default values, traffic from the Internet to the data center will be load balanced across how many paths? （）A. 1B. 2C. 3D. 4E. 5
Refer to the exhibit. What three statements are true about the IS － IS configuration?() A.The router is in area 49.0001.0002B.The router acts as a Level 1 - 2 routerC.CLNS routing is enable d for the routerD.The router has a system ID of 0003.0004E.The interfaces have a functional IS - IS configurationF.The network service access point selector (NSEL) byte has a value of 0
Refer to the exhibit. Which two statements are true about the partial configuration that is provided.() A. The peer group shortens the EBGP configurationB. The peer group shortens the IBGP configurationC. All the configured neighbors are in autonomous system 100D. Three AS - path filters are applied to each BGP neighborE. Only the outgoing filters are applied to BGP updates
Refer to the exhibit. Which st atement is true?() A. Router RTA is the BDRB. Router RTA is directly connected to interface 192.168.45.1C. Neighbor 192.168.45.1 has changed its OSPF priority numberD. Router RTA and neighbor 192.168.45.2 are exchanging OSPF LSAs
Refer to the exhibit. Why has this switch not been elected the root bridge for VLAN1?() A.It has more than one interface that is connected to the root network segment.B.It is running RSTP while the elected root bridge is running 802.1d spanning tree.C.It has a higher MAC address than the elected root bridge.D.It has a higher bridge ID than the elected root bridge.
To determine which grades of cargo a tank vessel is permitted to carry you should ______.A.refer to the vessel's Certificate of InspectionB.examine the cargo tanks and fittingsC.ask the terminal supervisor or his representativeD.check the loading order
Mary has just called and asked__to have lunch with her tomorrow.A.you and IB.you and meC.I and youD.me and you
A small company that is considering a Cisco converged network solution has asked whether you recommend the Cisco 2800 or 3800 Series Integrated Services Routers. Which two resources would you consult to determine the appropriate product？ （）A、 Cisco Partner Consultative SupportB、 Network Availability Improvement SupportC、 Cisco.comD、 Cisco Focused Technical Support
You have a single Active Directory directory service domain. You use a Group Policy object （GPO） to apply security settings to your client computers. You configure the startup type for system services settings in a new GPO， and you link the GPO to an organizational unit （OU）. You discover that the startup type for system services on one of the client computers has not been updated. You need to ensure that the Group Policy settings are applied to the client computer. What should you do？（）A、 Restart the client computer.B、 Instruct the user to log off and then log on to the client computer.C、 On the client computer， run the Gpupdate.exe command with the /Force parameter.D、 On the client computer， run the Gpupdate.exe command with the /Target：computer parameter.
A Windows Communication Foundation (WCF) service has a callback contract. You are developing a client application that will call this service.You must ensure that the client application can interact with the WCF service. What should you do?（）A、On the OperationContractAttribute, set the AsyncPattern property value to true.B、On the OperationContractAttribute, set the ReplyAction property value to the endpoint address of the client.C、On the client, create a proxy derived from DuplexClientBaseTChannel .D、On the client, use GetCallbackChannelT .
单选题Refer to the exhibit. Given the output for this command, if the router ID has not been manually set, what router ID will OSPF use for this RouterD?（）A 10.1.1.2B 10.154.154.1C 172.16.5.1D 192.168.5.3
单选题Refer to the exhibit. A Cisco Aironet Wireless LAN Client Adapter has been installed and configured through the ADU on the PC. The Aironet System Tray Utility （ASTU） has been enabled during the installation and the icon appears in the system tray area in the lower right of the desktop. What is thesignificance of the icon？（）A It indicates that the radio of the client adapter is disabledB It indicates that the client adapter is not associated to an access point or another clientC It indicates that the client adapter is associated to an access point or another client， but the user is not EAP authenticatedD It indicates that the client adapter is associated to an access point or another client， that the user is authenticated if the client adapter is configured for EAP authentication， and that the signal strength is excellent or goodE It indicates that the client adapter is associated to an access point or another client， that the user is authenticated if the client adapter is configured for EAP authentication， and that the signal strength is fairF It indicates that the client adapter is associated to an access point or another client， that the user is authenticated if the client adapter is configured for EAP authentication， and that the signal strength is poor
单选题Refer to the exhibit. A Cisco Aironet Wireless LAN Client Adapter has been installed and configured through the ADU on the PC. The Aironet System Tray Utility （ASTU） has been enabled during the installation and the icon appears in the system tray area in the lower right of the desktop. What is the significance of the icon？（）A It indicates that the radio of the client adapter is disabled.B It indicates that the client adapter is not associated to an access point or another client. C It indicates that the client adapter is associated to an access point or another client， but the user is not EAP authenticated.D It indicates that the client adapter is associated to an access point or another client， that the user is authenticated if the client adapter is configured for EAP authentication， and that the signal strength is excellent or good.E It indicates that the client adapter is associated to an access point or another client， that the user is authenticated if the client adapter is configured for EAP authentication， and that the signal strength is fair.F It indicates that the client adapter is associated to an access point or another client， that the user is authenticated if the client adapter is configured for EAP authentication， and that the signal strength is poor.
单选题Your company has 1，000 client computers. Each client computer has 1 GB of RAM. You are planning to deploy Windows 7 Enterprise. You need to design a zero-touch deployment strategy to increase the number of client computers that can be imaged at one time. What should you do？（）AIncrease the amount of RAM on the client computers.BChange from unicast to multicast deployment of images.CChange from multicast to unicast deployment of images.DDecrease the trivial file transfer protocol （TFTP） block size on the TFTP server.
单选题What would you consult to determine the number of persons required on duty while loading a cargo of leaded gasoline on your tanker? （）Athe Matitime Code of ChinaBCertificate of InspectionCOil Transfer Procedures ManualDIOPP Certificate
单选题A Windows Communication Foundation (WCF) service has a callback contract. You are developing a client application that will call this service.You must ensure that the client application can interact with the WCF service. What should you do?（）AOn the OperationContractAttribute, set the AsyncPattern property value to true.BOn the OperationContractAttribute, set the ReplyAction property value to the endpoint address of the client.COn the client, create a proxy derived from DuplexClientBaseTChannel .DOn the client, use GetCallbackChannelT .
问答题Practice 8 ● You are the Director of the Human Resources Department. The CEO has asked you to prepare a proposal on how to turn classroom training into workplace learning for the management discussion. ● Write the proposal explaining how to turn the classroom training into workplace learning. ● In your proposal, you need to: ● refer to the importance of turning professional training into workplace learning, ● summarize the key factors in effective learning cycle such as goals, practice, and application, etc. ● Write 200-250 words on the separate answer paper provided.