Refer to the exhibit. You have completed an OSPF implementation, and you are verifying OSPF operation. You notice that router A and router B are stuck in the two - way state. From the show ip ospf interface command output, what is the cause of this issue?（）A. All OSPF implementations must have at le ast one interface in area 0.B. You are attempting to run in the broadcast mode over an NBMA interface.C. Both routers are configured to function as a BDR; therefore, there is no DR router.D. Someone has changed the OSPF router ID; therefore you must clear the OSPF process.E. The OSPF priority is set to 0 on both routers; therefore neither can become the DR.
Refer to the exhibit. You have completed an OSPF implementation, and you are verifying OSPF operation. You notice that router A and router B are stuck in the two - way state. From the show ip ospf interface command output, what is the cause of this issue?（）
A. All OSPF implementations must have at le ast one interface in area 0.
B. You are attempting to run in the broadcast mode over an NBMA interface.
C. Both routers are configured to function as a BDR; therefore, there is no DR router.
D. Someone has changed the OSPF router ID; therefore you must clear the OSPF process.
E. The OSPF priority is set to 0 on both routers; therefore neither can become the DR.
相关考题：
Part of the signature of the String class is:class String {....};Other part of signature and implementation is completed by you.
You have recently completed the creation of a new application.Certkiller .com requires you to ensure that this new application creates a file that contains an array of bytes.What should you do?() A.B.C.D.
Refer to the exhibit. You want to minimize the downtime that results from supervisor engine switchovers on Cisco 6500 Series Switches and Cisco 7600 Series Routers. To achieve this, you are considering deploying a Cisco Nonstop Forwarding with Stateful Switchover solution using OSPF.In the exhibit you can see the output of the show ip ospf neighbor detail command.Which trait of systems using Cisco Nonstop Forwarding with Stateful Switchover and OSPF is shown in the exhibit output and will impact your plan?（）A. Stateful Switchover for Cisco Nonstop Forwarding only works with BGP.B. Stateful Switchover for Cisco Nonstop Forwarding must be configured on all adjacent routers.C. Cisco Nonstop Forwarding with Stateful Switchover helper mode is not supported on the adjacent router.D. Cisco Nonstop Forwarding with Stateful Switchover helper mode for OSPF has been promiscuousstandardized and is supported on the adjacent router.
Refer to the exhibit. The routing protocols EIGRP and OSPF have been configured as indicated in the exhibit. Given the partial configuration of router R2, which network will be present in th e routing table of R4?（）A. Network BB. Network A and Network BC. Network AD. neither Network A nor Network B
Refer to the exhibit. ROUTE.com is planning to implement a secure OSPF network to support traffic between clients on the 172.16.10.0/24 network and the file server on the 172.16.20./24 network. You have been asked to review the implementation and verification plans for this OSPF project. Which statement about the plan is true? （）A. It is complete as writtenB. It should include a task that verifie s that the interarea routes are using the proper MEDC. It should include a task that verifies that load sharing is active on R1 and R4D. It should include a task that verifies that all redundant links will become active when the primary links are sh ut down
Refer to the exhibit. ROUTE.com is planning to implement a new secure OSPF network to support traffic between clients on the 172.16.10.0/24 network and the file server on th e 172.16.20./24 network. You have been asked to review the implementation plan for the OSPF project. Which statement about the plan is true?（）A. It is complete as written.B. It should include a task that shuts down all unused interfaces.C. It sho uld include tasks that enable and verify OSPF authentication.D. It should include a task that establishes a file transfer baseline before and after the configuration is changed.
Refer to the exhibit. ROUTE.com is planning to implement load balancing for traffic between hosts on the 172.16.10.0/24 and 172.16.20./24 networks. You have been ask ed to review the implementation plan for this project. Which statement about the plan is true?（）A. It is complete as written.B. It should include a task to configure EIGRP multipath equal to 2 on R1 and R4.C. It should inc lude a task to implement OSPF because it handles unequal cost load balancing most efficiently using variance.D. It should include a task that establishes a baseline before and after the configuration has been changed.
Refer to the exhibit. EIGRP has been configured on router D. Router C is performing mutual redistribution between EI GRP and OSPF. While verifying that the redistribution is functioning properly, you discover that while router C has all of the EIGRP routes in its routing table, router A does not have any routes from the EIGRP domain. What on router C may be the cause o f the problem?（）A. The no auto - summary command needs to be added under router eigrp 1B. The subnets keyword was not included in the redistribute command under router ospf 1C. The metric specified for the redistributed EIGRP routes is too large; m aking the EIGRP routes unreachable by router AD. The default - information originate command needs to be added under router ospf 1E. The administrative distance of either OSPF or EIGRP must be changed so that EIGRP has a higher administrative distanc e than OSPF
Refer to the exhibits. You are verifying your OSPF implementation, and it does not seem to be functioning properly. What can you conclude from the exhibit and the show running - configuration command output? （）A. The OSPF areas are not configured correctly.B. The wildcard masks for the 10.x .x.x networks are incorrect.C. The 172.16.x.x networks need to be connected to area 0 using virtual links.D. The 172.16.x.x networks are discontiguous. OSPF is automatically summarizing them to 172.16.0.0/16 and data is being black holed.E. There is not enough information to make a determination.
Refer to the exhibit. You want to use all the routes in the EIGRP topology for IP load balancing. Which two EIGRP subcommands wou ld you use to accomplish this goal?() A. traffic - share balancedB. distanceC. maximum- pathsD. default - networkE. variance
Refer to the exhibit. OSPF is running throughout the network. You want to minimize the propagation of LSAs into and out of A rea 1. Which OSPF feature would best achieve this goal? () A. stubB. totally stubbyC. NSSAD. totally NSSA
You have completed an OSPF implementation, and you are verifying OSPF operation. During this verification, you notice that the OSPF route of 172.16.10.0 is repeatedly appearing and disappearing from the routing table. Further investigation finds that the OSPF CPU utilization is very high and the routers are constantly performing SPF calculations. You determine that 172.16.20.2 is the source of the 172.16.10.0 route. Using the show ip ospf database router 172.16.20.1 command, you notice that when this show command is performed repeatedly, the contents of the LSA change every few seconds.What could be the cause of this problem?（）A. OSPF authentication errors between some of the routersB. Two routers have the same OSPF router IDC. Issues with mistuned OSPF timersD. OSPF LSA pacing issues between some of the routersE. OSPF neighbor adjacency problems between some of the routers
Refer to the exhibit. You are the network administrator of the Route.com company. You have been tasked to implement a hub and spoke EIGRP topology over Frame Relay to provide connectivity between the networks at headquarters and all 300 spokes. Before you begin the actual implementation, which three pieces of information are more important to know than the others?（）A. the Committed Information Rate of all the Frame Relay PVCsB. the Cisco IOS version running on all the routersC. the router model number of all the spoke routersD. the number of HQ networks connected behind the headquarter routersE. the routing policy, such as whether or not the spokes can be used as backup transient point between the two headquarter routers
Refer to the exhibit. Which statement is true about the configuration? () A. RTA will not establish an OSPF adjacency w ith RTBB. RTA will send OSPF hello packets, but will not send OSPF updatesC. RTA will not accept OSPF hello packets from RTBD. RTA will send OSPF updates, but will not establish an adjacency with RTB
This diploma _____ that you have completed high school.[A] proves[B] certifies[C] secures[D] approves
When verifying the OSPF link state database, which type of LSAs should you expect to see within the different OS PF area types?（）A、All OSPF routers in stubby areas can have type 3 LSAs in their database.B、All OSPF routers in stubby areas can have type 7 LSAs in their database.C、All OSPF routers in totally stubby areas can have type 3 LSAs in their database.D、All OSPF routers in totally stubby areas can have type 7 LSAs in their database.E、All OSPF routers in NSSA areas can have type 3 LSAs in their database.F、All OSPF routers in NSSA areas can have type 7 LSAs in their database.
Half of your network uses RIPv2 and the other half runs OSPF. The networks do not communicate with each other. Which two of these factors describe the impact of activating EIGRP over each separate part？ （）A、EIGRP will not be accepted when configured on the actual RIPv2 routers.B、OSPF will no longer be used in the routing table， because you only have EIGRP internal routes running.C、OSPF will no longer be used in the routing table， because you only have EIGRP external routes running.D、RIPv2 will populate its RIP database but not its routing table， because you only have EIGRP external routes running.E、RIPv2 will populate its RIP database but not its routing table， because you only have EIGRP internal routes running.F、OSPF database will have RIPv2 routes.
What is a critical piece of information that you should have when creating a VLAN-based implementation plan？（）A、approval from senior managementB、end-user requirementsC、IEEE 802.1X authentication parametersD、a summary implementation plan
You have completed an OSPF implementation, and you are verifying OSPF operation. During this verification, you notice that the OSPF route of 172.16.10.0 is repeatedly appearing and disappearing from the routing table. Further investigation finds that the OSPF CPU utilization is very high and the routers are constantly performing SPF calculations. You determine that 172.16.20.2 is the source of the 172.16.10.0 route. Using the show ip ospf database router 172.16.20.1 command, you notice that when this show command is performed repeatedly, the contents of the LSA change every few seconds. What could be the cause of this problem?（）A、OSPF authentication errors between some of the routersB、Two routers have the same OSPF router IDC、Issues with mistuned OSPF timersD、OSPF LSA pacing issues between some of the routersE、OSPF neighbor adjacency problems between some of the routers
You have just completed an OSPF implementation. While executing your verification plan, you determine that R1 is not able to establish full OSPF adjacency with R2. The show ip ospf neighbor comman d output on R1 shows that R2 is stuck in the INIT state. What could be the cause of this problem?（）A、DR and BDR election errors between R1 and R2.B、The R2 router has not received the OSPF hello packets from the R1 router.C、Mismatched interface ma ximum transmission unit (MTU) configuration between the R1 and R2.D、Mismatched OSPF hello interval configuration between the R1 and R2E、Corrupted LSAs exchanges between the R1 and R2.
While designing your database， you have created the EMPLOYEEStable as an index-organized （IOT）. You want to create a bitmap index on the JOD_IDcolumn to make queries faster. Which task must have been completed so that you are able to create the bitmap index？（）A、 A primary key must have been created.B、 A mapping table must have been created.C、 An overflow tablespace must have been specified.D、 The PCTTHRESHOLD option must have been specified.
You work as a database administrator for Supportcenter.cn. In your production database， the size of Database Buffer Cache needs to be increased immediately for the current as well as future instances of the database. The Oracle instance has been configured to accommodate any changes in the size of the memory structures. At this is production database， you want to accomplish this task with no impact on the user’s connections. Which activity must you have completed before accomplishing this task？（）A、You must have started the database instance in restricted mode.B、You must have started the database instance inNORMALmode.C、You must have started the database instance with server parameter file.D、You must have started the database instance but must not have mounted.E、You must have started the database instance but must not have opened.
You work as an application developer at Certkiller .com. You have recently created a custom collection class named ShoppingList for a local supermarket. This custom class will include ShoppinItem objects that have the public properties listed below. * Name * AisleNumber * OnDiscount You are required to enable users of your class to iterate through the ShoppingList collection， and to list each product name and aisle number using the foreach statement.You need to achieve this by declaring the appropriate code.What code should you use？（）A、 public class ShoppingList ： ICollection {// Class implementation }B、 public class ShoppingList ： IEnumerator， IEnumerable {// Class implementation }C、 public class ShoppingList ： Ilist {// Class implementation }D、 public class ShoppingList ： Enum {// Class implementation }
单选题You have completed an OSPF implementation, and you are verifying OSPF operation. During this verification, you notice that the OSPF route of 172.16.10.0 is repeatedly appearing and disappearing from the routing table. Further investigation finds that the OSPF CPU utilization is very high and the routers are constantly performing SPF calculations. You determine that 172.16.20.2 is the source of the 172.16.10.0 route. Using the show ip ospf database router 172.16.20.1 command, you notice that when this show command is performed repeatedly, the contents of the LSA change every few seconds. What could be the cause of this problem?（）AOSPF authentication errors between some of the routersBTwo routers have the same OSPF router IDCIssues with mistuned OSPF timersDOSPF LSA pacing issues between some of the routersEOSPF neighbor adjacency problems between some of the routers
单选题You work as an application developer at Certkiller .com. You have recently created a custom collection class named ShoppingList for a local supermarket. This custom class will include ShoppinItem objects that have the public properties listed below. * Name * AisleNumber * OnDiscount You are required to enable users of your class to iterate through the ShoppingList collection， and to list each product name and aisle number using the foreach statement.You need to achieve this by declaring the appropriate code.What code should you use？（）A public class ShoppingList ： ICollection {// Class implementation }B public class ShoppingList ： IEnumerator， IEnumerable {// Class implementation }C public class ShoppingList ： Ilist {// Class implementation }D public class ShoppingList ： Enum {// Class implementation }
单选题By the time you come to see me next month, I _____ my term paper.Ahave completedBcompleteCam completingDwill have completed
单选题You have received a default route through BGP from your ISP and you want to redistribute it into OSPF.Which mehtod will accomplish this?（）AApply an export policy to OSPF that exports the default routeBApply an import policy to OSPF that imports the default routeCApply the default-network command to OSPFDApply the redistribute-igp command to BGP