Look at the following exhibit. Which of the following correctly states the routes to be redistributed into OSPF? () A. The network 10.0.10.0/24 will be allowed and assigned a metric of 200B. All networks except 10.0.0.0/8 will be allowed and assigned a metric of 200C. The network 172.16.0.0/16 will be allowed and assigned a metric of 200D. The network 192.168.1.0 will be allowed and assigned a metric of 100
Look at the following exhibit. Which of the following correctly states the routes to be redistributed into OSPF? ()
A. The network 10.0.10.0/24 will be allowed and assigned a metric of 200
B. All networks except 10.0.0.0/8 will be allowed and assigned a metric of 200
C. The network 172.16.0.0/16 will be allowed and assigned a metric of 200
D. The network 192.168.1.0 will be allowed and assigned a metric of 100
相关考题：
Router R1 has been configured with the redistribute ospf 1 route - map fred command under router eigrp 1. The route map named fred needs to be configured to match routes to d etermine which routes are redistributed into EIGRP.Which of the following answers lists an item that cannot be matched by route map fred?（）A. Subnet numberB. Next - hop router IP address of the routeC. Whether the route is an E1 or E2 routeD. The ro ute‘s tagE. The number of router hops between the router and the subnet
Router R1 has a connected route for 10.1.1.0/24 off interface Fa0/0. Interface Fa0/0 has been enabled for OSPF due to a router ospf 1 and network 10.0.0.0 0.0.0.255 area 0 command. R1 also has EIGRP configured, with the redistribute ospf 1 metric 1000 100 10 1 1500 command configured under EIGRP.Which one of the following is true?（）A. R1 will not redistribute 10.1.1.0/24 into EIGRP, because R1 knows it as a connected route and not as an OSPF route.B. For any OS PF routes redistributed into EIGRP, the metric components includea value equivalent to 1 Mbps of bandwidth.C. For any OSPF routes redistributed into EIGRP, the metric components include a value equivalent to 100 microseconds of delay.D. No subnets of network 10.0.0.0 will be redistributed due to the omission of the subnets parameter.
Refer to the exhibit. Will redistribute d RIP routes from OSPF Area 2 be allowed in Area 1? () A. RIP routes will be allowed in Area 1 only if they are first redistributed into EIGRP.B. Because NSSA will discard type 7 LSAs, redistributed RIP routes will not be allowed in Area 1.C. Redistrib uted RIP routes will be allowed in Area 1 because they will be changed into type 5 LSAs in Area 0 and passed on into Area 1.D. Redistributed RIP routes will be allowed in Area 1 because they will be changed into type 7 LSAs in Area 0 and passed on into Area 1.E. Because Area 1 is an NSSA, redistributed RIP routes will not be allowed.
A network administrator is troubleshooting a redistribution of RIP routes into OSPF. Given the exhibited configuration commands, which statement is true? () A. Redistributed ro utes will be tagged as external type 1 (E1) with a metric of 30.B. Redistributed routes will be tagged as external type 2 (E2) with a metric of 20.C. Redistributed routes will maintain their original RIP routing metric.D. Redistributed routes will ha ve a default metric of 0 and will be treated as unreachable and not advertised.E. Redistributed routes will have a default metric of 0 but will not be treated as reachable and will be advertised.
Refer to the exhibit. Examine the partial configuration and the routing table excerpt. Which routes would be redistributed into OSPF area 1?() A. 10.10.10.16/28 onlyB. 10.10.10.16/28 and 10.10.10.64/26C. 10.10.10.16/28, 10.10.10.64/26, and 172.16.10.0/24D. 10.10.10.64/26 only
Refer to the exhibit. Examine the partial configuration and the routing table excerpt. Which routes would be redistributed into OSPF area 1? () A. 10.10.10.16/28 onlyB. 10.10.10.16/28 and 10.10.10.64/26C. 10.10.10.16/28, 10.10.10 .64/26, and 172.16.10.0/24D. 10.10.10.64/26 only
Refer to the above exhibit. Why are the EIGRP neighbors for this router not learning the routes redistributed from OSPF?() A. Redistribution must be enabled mutually (in both directions) to work correctly.B. auto - summary causes the OSPF routes redistributed into EIGRP to be summarized; thus the OSPF network 116.16.34 is summarized to 116.3 4.0.0, which is already covered by the EIGRP protocol.C. Default metrics are not configured under EIGRP.D. Both routing protocols must have unique autonomous system numbers for redistribution to function correctly.
Refer to the exhibit. Which three statements accurately describe the result of applying the exhibited route map?() A. The map prohibits th e redistribution of all type 2 external OSPF routes.B. All routes that do no match clauses 10 and 20 of the route map are redistributed with their tags set to 8.C. The map prohibits the redistribution of all external OSPF routes with tag 6 set.D. Th e map permits the redistribution of all type 1 external OSPF routes.E. The map redistributes into EIGRP all routes that match the pfx prefix list and the five metric values?0000, 1000, 255, 1, and 1500.F. The map prohibits the redistribution of all ty pe 2 external OSPF routes with tag 6 set.
Refer to the exhibit. Which two statement s are correct?() A. All the routes were redistributed into BGP from an IGPB. All the routes were originated by BGP with the network commandC. All six routes will be installed in the routing tableD. Four routes will be installed in the routing ta bleE. Two routes will be installed in the routing table
Refer to the exhibit. OSPF has been configured on all routers in the network and Area 1 has been configured as a NSSA. Which statement is true about the NSSA Area 1?() A. Only redistributed RIP routes will appear in Area 1. They will be advertised via t ype 7 LSAsB. No redistributed routes can appear in Area 1, only summary routesC. Redistributed RIP and IGRP routes will appear in Area 1. They will be advertised via type 5 LSAsD. Only redistributed IGRP routes will appear in Area 1. They will be advertised via type 7 LSAs
Router R1 has a connected route for 10.1.1.0/24 off interface Fa0/0. Interface Fa0/0 has been enabled for OSPF due to a router ospf 1 and network 10.0.0.0 0.0.0.255 area 0 command. R1 also has EIGRP configured, with the redistribute ospf 1 metric 1000 100 10 1 1500 command configured under EIGRP. Which one of the following is true?（）A、R1 will not redistribute 10.1.1.0/24 into EIGRP, because R1 knows it as a connected route and not as an OSPF route.B、For any OS PF routes redistributed into EIGRP, the metric components includea value equivalent to 1 Mbps of bandwidth.C、For any OSPF routes redistributed into EIGRP, the metric components include a value equivalent to 100 microseconds of delay.D、No subnets of network 10.0.0.0 will be redistributed due to the omission of the subnets parameter.
Router R1 is redistributing between two OSPF processes. Given the configuration shown, which includes all commands in the route map named fred, which of the following answers is true regarding the redistribution into OSPF process 1?（） router ospf 1 redistribute ospf 2 external 2 route - map fred ! route - map fred permit 10 match ip address 1 set metric - type type - 1A、No routes are redistributed because a route cannot be both E1 and E2.B、Only OSPF E2 routes in the OSPF 2 domain will be considered for redistribution.C、Inside the OSPF 2 domain, any formerly E2 routes will become E1 routes.D、Routes permitted by ACL 1 will be redistributed, regardless of whether the routes are E1 or E2 routes.
Router R1 has been configured with the redistribute ospf 1 route - map fred command under router eigrp 1. The route map named fred needs to be configured to match routes to d etermine which routes are redistributed into EIGRP. Which of the following answers lists an item that cannot be matched by route map fred?（）A、Subnet numberB、Next - hop router IP address of the routeC、Whether the route is an E1 or E2 routeD、The ro ute's tagE、The number of router hops between the router and the subnet
If a metric is not specified for routes that are redistributed into OSPF， the default metric that is assigned to the routes is 20， except for redistributed BGP routes. What is the metric that is assigned to redistributed BGP routes？（）A、0B、1C、10D、200
Which two statements about route redistribution when implementing OSPF are true?（）A、Routes learned using any IP routing protocol can only be redistributed into non IP routing protocols.B、OSPF can import routes learned using EIGRP, RIP, and IS - IS.C、OSPF routes cannot be exported into EIGRP, RIP, an d IS - IS.D、At the interdomain level, OSPF cannot import routes learned using BGP.E、OSPF routes can be exported into BGP.
Which of the following are correct statements？（）A、EIGRP advertises the best routes to its neighborB、EIGRP uses "cost" to determine best pathC、EIGRP allows unequal cost load balancingD、OSPF requires neighbor adjacencies before updates are sentE、EIGRP advertises all routes to its neighborF、OSPF allows unequal cost load balancing
For a router to successfully redistribute routes between OSPF and EIGRP, which of the following are true?（）A、The router must have one routing protocol configured, but configuration for both routing protocols is not necessaryB、The router must hav e at least one working link connected to each routing domainC、The redistribute command must be configured under EIGRP to send the routes to OSPFD、The redistribute command should be configured under OSPF to take routes from EIGRP into OSPF
多选题Refer to the exhibit. Which two statements are correct？ （Choose two.）（）AAll six routes will be installed in the routing table.BTwo routes will be installed in the routing table.CFour routes will be installed in the routing table.DAll the routes were redistributed into BGP from an IGP.EAll the routes were originated by BGP with the network command.
多选题Process EIGRP 1 is redistributing routes from process OSPF 2. Which two of the following methods may be used to set the metrics of the redistributed routes?（）ALet the metrics default.BSet the metric components using the redistri bute command's metric keyword.CSet the metric components using the default - metric router subcommand.DSet the integer (composite) metric using the redistribute command's metric keyword.
多选题Refer to the exhibit. Which two statements are correct？（）AAll six routes will be installed in the routing tableBTwo routes will be installed in the routing tableCFour routes will be installed in the routing tableDAll the routes were redistributed into BGP from an IGPEAll the routes were originated by BGP with the network command
多选题For a router to successfully redistribute routes between OSPF and EIGRP, which of the following are true?（）AThe router must have one routing protocol configured, but configuration for both routing protocols is not necessaryBThe router must hav e at least one working link connected to each routing domainCThe redistribute command must be configured under EIGRP to send the routes to OSPFDThe redistribute command should be configured under OSPF to take routes from EIGRP into OSPF
单选题Router R1 is redistributing between two OSPF processes. Given the configuration shown, which includes all commands in the route map named fred, which of the following answers is true regarding the redistribution into OSPF process 1?（） router ospf 1 redistribute ospf 2 external 2 route - map fred ! route - map fred permit 10 match ip address 1 set metric - type type - 1ANo routes are redistributed because a route cannot be both E1 and E2.BOnly OSPF E2 routes in the OSPF 2 domain will be considered for redistribution.CInside the OSPF 2 domain, any formerly E2 routes will become E1 routes.DRoutes permitted by ACL 1 will be redistributed, regardless of whether the routes are E1 or E2 routes.
多选题Refer to the exhibit. Which three statements accurately describe the result of applying the exhibited route map？（）AThe map prohibits the redistribution of all type 2 external OSPF routes with tag 6 setBThe map prohibits the redistribution of all type 2 external OSPF routesCThe map redistributes into EIGRP all routes that match the pfx prefix list and the five metric values40000， 1000， 255， 1， and 1500DThe map prohibits the redistribution of all external OSPF routes with tag 6 setEAll routes that do no match clauses 10 and 20 of the route map are redistributed with their tags set to 8FThe map permits the redistribution of all type 1 external OSPF routes
多选题Process OSPF 1 is redistributing routes from process OSPF 2. Which of the following methods may be used to set the metrics of the redistributed routes?（）ALet the metrics default.BUse each redistributed route's OSPF metric using the redistribute command's metric transparent keywords.CSet the metric using the default - metric router subcommand.DRedistribution is not allowed between two OSPF p rocesses.
单选题If a metric is not specified for routes that are redistributed into OSPF, the defaul t metric that is assigned to the routes is 20, except for redistributed BGP routes. What is the metric that is assigned to redistributed BGP routes?（）A200B0C1D10
单选题If a metric is not specified for routes that are redistributed into OSPF， the default metric that is assigned to the routes is 20， except for redistributed BGP routes. What is the metric that is assigned to redistributed BGP routes？（）A0B1C10D200
单选题Router R1 has been configured with the redistribute ospf 1 route - map fred command under router eigrp 1. The route map named fred needs to be configured to match routes to d etermine which routes are redistributed into EIGRP. Which of the following answers lists an item that cannot be matched by route map fred?（）ASubnet numberBNext - hop router IP address of the routeCWhether the route is an E1 or E2 routeDThe ro ute's tagEThe number of router hops between the router and the subnet