The Testking router is running RIP as the routing protocol, and the IP routing table is displayed below:Gateway of last resort is 10.1.2.2 to network 0.0.0.010.0.0.0/24 is subnetted, 2 subnetsR 10.1.3.0 [120/1] via 10.1.2.2, 00:00:00, Serial0/0C 10.1.2.0 is directly connected, Serial0/0C 10.1.5.0 is directly connected, Serial0/1C 10.1.6.0 is directly connected, FastEthernet0/0R* 0.0.0.0/0 [120/1] via 10.1.5.5, 00:00:00, Serial0/1Based on the output above, if an administrator pings host 10.1.8.5 from host10.1.6.100, how will the router TestkingA process the ICMP packets?（）A. The packets will be discarded.B. The packets will be routed out the S0/0 interface.C. The packets will be routed out the S0/1 interface.D. The packets will be routed out the Fa0/0 interface.E. The packets will be routed through the 10.1.2.2 gateway.
The Testking router is running RIP as the routing protocol, and the IP routing table is displayed below:Gateway of last resort is 10.1.2.2 to network 0.0.0.010.0.0.0/24 is subnetted, 2 subnetsR 10.1.3.0 [120/1] via 10.1.2.2, 00:00:00, Serial0/0C 10.1.2.0 is directly connected, Serial0/0C 10.1.5.0 is directly connected, Serial0/1C 10.1.6.0 is directly connected, FastEthernet0/0R* 0.0.0.0/0 [120/1] via 10.1.5.5, 00:00:00, Serial0/1Based on the output above, if an administrator pings host 10.1.8.5 from host10.1.6.100, how will the router TestkingA process the ICMP packets?（）
A. The packets will be discarded.
B. The packets will be routed out the S0/0 interface.
C. The packets will be routed out the S0/1 interface.
D. The packets will be routed out the Fa0/0 interface.
E. The packets will be routed through the 10.1.2.2 gateway.
相关考题：
阅读下面的短文，回答问题 [When an IP packet arrives at a router, generally the router looks at the destination address of the packet, and forwards the packet to one of its network interfaces. The forwarding decision is usually done by looking up the destination address from another data structure called a forwarding table. The forwarding table is created by the router using the routing table and possible routing policies existing in the router. The router then creates a table where it lists which networks are accessible through which of the routers network interfaces. An IP router looks at every IP packet individually and does the forwarding decision on a packet-by-packet basis. If something changes in the routers routing table, a packet can take a different route from a preceding packet even if it has the same destination.] From the paragraph above，we can see that the router （ ） a forwarding table according to the routing table and possible routing policies existing in the router. When an IP packet arrives at a router, the （ ） part of packet is normally checked by the router. An IP router checks every IP Packet individually and makes the forwarding decision based on （ ）.A．is generating B．generate C．is generated D．generates A．forwarding table B．network interfaces C．routing policies D．destination address A．the destination address and network interfaces B．forwarding table and network interfaces C．the destination address and forward table D．routing policies and routing table
RIP version 2 is being used as the routing protocol within the Testking network.What does RIP version 2 use to prevent routing loops?() A. CIDRB. Split horizonC. AuthenticationD. Classless maskingE. Hold-down timersF. Multicast routing updatesG. Path Vectoring
You need to choose a routing protocol for a new Testking network. This network will be running IP, IPX, and Appletalk, and you wish to utilize only one routing protocol. Which one would be the best choice?（）A. OSPFB. EIGRPC. RIP v2D. IGRPE. RIP v1
What two things will a router do when running a distance vector routing protocol?() A. Send periodic updates regardless of topology changes.B. Send entire routing table to all routers in the routing domain.C. Use the shortest-path algorithm to the determine best path.D. Update the routing table based on updates from their neighbors.E. Maintain the topology of the entire network in its database.
● One of the most widely used routing protocols in IP networks is the Routing Information Protocol (RIP). RIP is the canonical example of a routing protocol built on the （71）algorithm. Routing protocols in internetworks differ slightly from the idealized graph model. In an internetwork, the goal of the routers to forward packets to various （72）.Routers running RIP send their advertisement about cost every （73） seconds. A router also sends an update message whenever an update from another router causes it to change its routing table.It is possible to use a range of different metrics or costs for the links in a routing protocol. RIP takes the simplest approach, with all link costs being equal （74）. Thus it always tries to find the minimum hop route. Valid distances are 1 through （75）.This also limits RIP to running on fairly small networks.（71）A. distance vectorB. link stateC. floodingD. minimum spanning tree（72）A. computersB. routersC. switchesD. networks（73）A. 10B. 30C. 60D. 180（74）A. 1B. 15C. 16D. length of the link（75）A. 6B. 10C. 15D. 16
One of the most widely used routing protocols in IP networks is the Routing Information Protocol(RIP)．RIP is the canonical example of a routing protocol built on the (71) algorithm．Routing protocols in internetworks differ slightly from the idealized graph model．In aninternetwork，the goal of the routers to forward packets to various (72) ．Routers running RIP send their advertisement about cost every (73) seconds．A router also sends an update message whenever an update from another router causes it to change itsrouting table．It is possible to use a range of different metrics or costs for the links in a routing protocol．RIP takes the simplest approach，with all link costs being equal (74) Thus it always tries tofind the minimum hop route．Valid distances are 1 through (75) ．This also limits RIP torunning on fairly small networks．（71）A．distance vectorB．link stateC．floodingD．minimum spanning tree
One of the most widely used routing protocols in IP networks is the Routing Information Protocol（RIP）。RIP is the canonical example of a routing protocol built on the（ ）algorithm.Routing protocols in internetworks differ slightly from the idealized graph model.In an internetwork,the goal of the routers to forward packets to various（ ）.Routers running RIP send their advertisement about cost every（ ）seconds.A router also sends an update message whenever an update from another router causes it to change its routing table.It is possible to use a range of different metrics or costs for the links in a routing protocol.RIP takes the simplest approach,with all link costs being equal（ ）。Thus it always tries to find the minimum hop route.Valid distances are 1 through（请作答此空）。This also limits RIP to running on fairly small networks.A.6B.10C.15D.16
One of the most widely used routing protocols in IP networks is the Routing Information Protocol（RIP）。RIP is the canonical example of a routing protocol built on the（ ）algorithm.Routing protocols in internetworks differ slightly from the idealized graph model.In an internetwork,the goal of the routers to forward packets to various（请作答此空）.Routers running RIP send their advertisement about cost every（ ）seconds.A router also sends an update message whenever an update from another router causes it to change its routing table.It is possible to use a range of different metrics or costs for the links in a routing protocol.RIP takes the simplest approach,with all link costs being equal（ ）。Thus it always tries to find the minimum hop route.Valid distances are 1 through（ ）。This also limits RIP to running on fairly small networks.A.computersB.routersC.switchesD.networks
RIP version 2 is being used as the routing protocol within the Testking network.What does RIP version 2 use to prevent routing loops?（）A、CIDRB、Split horizonC、AuthenticationD、Classless maskingE、Hold-down timersF、Multicast routing updatesG、Path Vectoring
it is belong a family of ip routing protocols，each router have a partial map of network，what is the routing protocol？
The Testking router is running both RIP and IGRP, and the same route is learned by this router from both of these methods. However, when you issue the command"show ip route" you see only the IGRP route, and not the RIP route. Why is this?（）A、IGRP has a faster update timer.B、IGRP has a lower administrative distance.C、RIP has a higher metric value for that route.D、The IGRP route has fewer hops.E、The RIP path has a routing loop.
Which of the following statements regarding routed and routing protocols are true?（）A、A routed protocol is assigned to an interface and determines the method of packet deliver.B、A routing protocol determines the path of a packet through a network.C、A routed protocol determines the path of a packet through a network.D、A routing protocol operates at the transport layer of the OSI model.E、A routed protocol updates the routing table of a router.
The Testking network is utilizing RIP as the IP routing protocol. Router TK1 learns how to reach the same destination via 6 different paths. All paths have the same metric and administrative distance. With all routers using the default operation,which of the paths will be chosen to reach the destination?（）A、Only the first two paths that are learned.B、Four of the paths.C、All six routes in a routed robin fashion.D、The oldest two paths in the routing table.E、The first path learned to the destination network.
You need to choose a routing protocol for a new Testking network. This network will be running IP, IPX, and Appletalk, and you wish to utilize only one routing protocol. Which one would be the best choice?（）A、OSPFB、EIGRPC、RIP v2D、IGRPE、RIP v1
How will router A choose a path to the 10.1.2.0/24 network when different routing protocols are configured (Choose three.)（）。A、If RIPv2 is the routing protocol, only the path AD will be installed in the routing table by default.B、If RIPv2 is the routing protocol, the equal cost paths ABD and ACD will be installed in the routing table by default.C、If EIGRP is the routing protocol, only the path AD will be installed in the routing table by default.D、If EIGRP is the routing protocol, the equal cost paths ABD and ACD will be installed in the routing table by default.E、If EIGRP and OSPF are both running on the network, the EIGRP paths will be installed in the routing table.F、If EIGRP and OSPF are both running on the network, the OSPF paths will be installed in the routing table.
Which two statements are characteristics of a distance vector routing protocol?（）A、RIP is an example of distance vector routing protocols.B、Updates are periodic and include the entire routing table.C、Routing updates are sent only after topology changesD、The protocol can be useful in hub-and-spoke and hierarchical networks.E、Convergence is usually faster than with link state protocolsF、Each router has its own view of the topology
The routers named Testking1 and Testking2 are both configured with RIP only.What will happen in the event of Testking1 receiving a routing update that contains a higher cost path to a network already in its routing table?（）A、The update information will be added to the existing routing table.B、The update information will replace the existing routing table entry.C、The update will be ignored and thus no further action will occur.D、The existing routing table entry will be purged from the routing table and all routers will attempt convergence.
Which IOS commands can a network technician use to verify all RIP, IGRP,EIGRP, and OSPF routing protocol configurations?（）A、debug ip routingB、show running-configC、show ip route protocolsD、show ip protocolsE、show protocols al
A RIP router has an entry in the routing table for a specific network destination. It then gets updated with another entry for that same destination, but with a higher path cost (hop count) than the one already in the routing table. What will the router do in this situation?（）A、It will ignore the update and take no further action.B、It will add the update information to its routing table.C、It will replace the existing routing table entry with the update information.D、It will delete the existing routing table and will send out hello packets to rebuild the routing table.
单选题The routers named Testking1 and Testking2 are both configured with RIP only.What will happen in the event of Testking1 receiving a routing update that contains a higher cost path to a network already in its routing table?（）AThe update information will be added to the existing routing table.BThe update information will replace the existing routing table entry.CThe update will be ignored and thus no further action will occur.DThe existing routing table entry will be purged from the routing table and all routers will attempt convergence.
多选题RIP version 2 is being used as the routing protocol within the Testking network.What does RIP version 2 use to prevent routing loops?（）ACIDRBSplit horizonCAuthenticationDClassless maskingEHold-down timersFMulticast routing updatesGPath Vectoring
单选题The Testking router is running both RIP and IGRP, and the same route is learned by this router from both of these methods. However, when you issue the command"show ip route" you see only the IGRP route, and not the RIP route. Why is this?（）AIGRP has a faster update timer.BIGRP has a lower administrative distance.CRIP has a higher metric value for that route.DThe IGRP route has fewer hops.EThe RIP path has a routing loop.
问答题it is belong a family of ip routing protocols，each router have a partial map of network，what is the routing protocol？
多选题What two things will a router do when running a distance vector routing protocol? （）ASend periodic updates regardless of topology changes.BSend entire routing table to all routers in the routing domain.CUse the shortest-path algorithm to the determine best path.DUpdate the routing table based on updates from their neighbors.EMaintain the topology of the entire network in its database.
单选题A RIP router has an entry in the routing table for a specific network destination. It then gets updated with another entry for that same destination, but with a higher path cost (hop count) than the one already in the routing table. What will the router do in this situation?（）AIt will ignore the update and take no further action.BIt will add the update information to its routing table.CIt will replace the existing routing table entry with the update information.DIt will delete the existing routing table and will send out hello packets to rebuild the routing table.
多选题How will router A choose a path to the 10.1.2.0/24 network when different routing protocols are configured (Choose three.)（）。AIf RIPv2 is the routing protocol, only the path AD will be installed in the routing table by default.BIf RIPv2 is the routing protocol, the equal cost paths ABD and ACD will be installed in the routing table by default.CIf EIGRP is the routing protocol, only the path AD will be installed in the routing table by default.DIf EIGRP is the routing protocol, the equal cost paths ABD and ACD will be installed in the routing table by default.EIf EIGRP and OSPF are both running on the network, the EIGRP paths will be installed in the routing table.FIf EIGRP and OSPF are both running on the network, the OSPF paths will be installed in the routing table.
单选题You need to choose a routing protocol for a new Testking network. This network will be running IP, IPX, and Appletalk, and you wish to utilize only one routing protocol. Which one would be the best choice?（）AOSPFBEIGRPCRIP v2DIGRPERIP v1
多选题Which IOS commands can a network technician use to verify all RIP, IGRP,EIGRP, and OSPF routing protocol configurations?（）Adebug ip routingBshow running-configCshow ip route protocolsDshow ip protocolsEshow protocols al