Which commands are required to properly configure a router to run OSPF and to add network 192.168.16.0／24 to OSPF area 0?() A.Router(config)#router ospf 1B.Router(config)#router ospf 0C.Router(config)#router ospf area 0D.Router(config-router)#network 192.168.16.0 0.0.0.255 area 0E.Router(config-router)#network 192.168.16.0 0.0.0.255 0F.Router(config-router)#network 192.168.16.0 255.255.255.0 area 0
Which commands are required to properly configure a router to run OSPF and to add network 192.168.16.0／24 to OSPF area 0?()
A.Router(config)#router ospf 1
B.Router(config)#router ospf 0
C.Router(config)#router ospf area 0
D.Router(config-router)#network 192.168.16.0 0.0.0.255 area 0
E.Router(config-router)#network 192.168.16.0 0.0.0.255 0
F.Router(config-router)#network 192.168.16.0 255.255.255.0 area 0
相关考题：
某园区网采用 OSPF路由协议,参与 OSPF的网络地址是 169.111.0.0/16, Cisco路由器的正确配置是 （ ） 。A) Rounter(config)# router ospf63Rounter(config-router)# network 169.111.0.0 0.0.0.0 area 0Rounter(config_router)# area o range 169.111.0.0 255.255.0.0B) Rounter(config)# router ospf63Rounter(config-router)# network 169.111.0.0 255.255.0.0 area 0Rounter(config-router)# area o range 169.111.0.0 255.255.0.0C) Rounter(config)# router ospf63Rounter(config-router)# network 169.111.0.0 0.0.255.255 area 0Rounter(config_router)# area o range 169.1-11.0.0 255.255.0.0D) Rounter(config)# router ospf63Rounter(config_router)# network 169.111.0.0 0.0.255.255 area 0Rounter(config-router)# area o range 169.111.0.0 0.0.255.255
某园区网采用OSPF路由协议，参与OSPF的网络地址是169.111.0.0/16 Cisco路由器的正确配置是A．Router (config) #router ospf 63 Router (config-router) #network 169.111.0.0 0.0.0.0 area 0 Router (config-router) #area 0 range 169.111.0.0 255.255.0.0B．Router (config) #router ospf 63 Router (config-router) # network 169.111.0.0 255.255.0.0 area 0 Router (config-router) #area 0 range 169.111.0.0 255.255.0.0C．Router (config) #router ospf 63 Router (config-router) #network 169.111.0.0 0.0.255.255 area 0 Router (config-router) #area 0 range 169.111.0.0 255.255.0.0D．Router (config) #router ospf 63 Router (config-router) #network 169.111.0.0 0.0.255.255 area 0 Router (config-router) #area 0 range 169.111.0.0 0.0.255.255
Which OSPF router type summarizes network advertisements from one OSPF area into another?() A.AB.BC.CD.D
Refer to the diagram. Which OSPF configuration command is required to configure Area 3 a s atotally stubby area?() A. On the ABR router ospf 10 area 3 stubB. On all Area 3 routers router ospf 10 area 3 stubC. On all Area 3 routers router ospf 10 area 3 stub no - summaryD. On the ABR router ospf 10 area 3 nssaE. On the ABR rou ter ospf 10 area 3 stub no - summary
A router has been configured with the commands router os pf 9, network 172.16.1.0 0.0.0.255 area 8, and network 172.16.0.0 0.0.255.255 area 9, in that order. No other OSPF -related commands have been configured. The answers list the IP addresses that could be assigned to this router's Fa0/0 interface. Which an swers list an IP address/prefix length that would cause the router to put Fa0/0 into area 9?（）A、172.16.0.1/23B、172.16.1.1/26C、172.16.1.1/24D、172.16.0.255/23E、None of the other answers is correct.
A new router, named TK1, is being installed. You wish to add this router to your existing OSPF network. In doing so, you configure the following: TK1(config)# router ospf 1 TK1(config-router)# network 10.10.10.0 255.255.255.0 area 0 After making this change, you notice that the networks attached to TK1 are not being learned by the other OSPF routers. What could be the cause of this?（）A、The AS is not correctly configuredB、The network subnet mask is incorrectly configuredC、The network wildcard mask is configured incorrectlyD、The network number is not correctly configuredE、The process id is configured incorrectlyF、None of the above
Which of the following describe the process identifier that is used to run OSPF on a router (Choose two.)（）。A、It is locally significantB、It is globally significantC、It is needed to identify a unique instance of an OSPF databaseD、It is an optional parameter required only if multiple OSPF processes are running on the routerE、All routers in the same OSPF area must have the same process ID if they are to exchange routing information
Which commands are required to properly configure a router to run OSPF and to add network 192.168.16.0/24 to OSPF area 0?（）A、TestKingRouter(config)# router ospf 0B、TestKingRouter(config)# router ospf 1C、TestKingRouter(config)# router ospf area 0D、TestKingRouter(config)# network 192.168.16.0 0.0.0.255 0E、TestKingRouter(config)# network 192.168.16.0 0.0.0.255 area 0F、TestKingRouter(config)# network 192.168.16.0 255.255.255.0 area 0
Which commands are required to properly configure a router to properly configure a router to run OSPFand to add network 192.168.16.0/24 to OSPF area 0？（）A、Router（config）#router ospf 1B、Router（config）#router ospf 0C、Router（config）#router ospf area 0D、Router（config-router）#network 192.168.16.0 0.0.0.255 area 0E、Router（config-router）#network 192.168.16.0 0.0.0.255 0F、Router（config-router）#network 192.168.16.0 255.255.255.0 area 0
Which two of these steps are minimum requirements to configure OSPFv3 under IPv6？（）A、Configure a routing process using the command ipv6 router ospf [process-id].B、Add the network statement for the interfaces on which OSPF will run.C、Configure OSPF on the interface that it will run on.D、Use the passive-interface command on the interfaces on which OSPF should not run.E、Enable routing.
Which commands are required to properly configure a router to properly configure a router to run OSPF and to add network 192.168.16.0/24 to OSPF area 0?（）A、Router(config)#router ospf 1B、Router(config)#router ospf 0C、Router(config)#router ospf area 0D、Router(config-router)#network 192.168.16.0 0.0.0.255 area 0E、Router(config-router)#network 192.168.16.0 0.0.0.255 0F、Router(config-router)#network 192.168.16.0 255.255.255.0 area 0
Which of the following describe the process identifier that is used to run OSPF on a router?（）A、It is logically significant.B、It is globally significant.C、It is needed to identify a unique instance of an OSPF database.D、It is an optional parameter required only if multiple OSPF processes are running on the router.E、All routers in the same OSPF area must have the same process ID if they are to exchange routing information.
Which of the following OSPF commands, when used together, will put the network 192.168.10.0/24 into OSPF area 0?（）A、Router(config-router)# network 192.168.10.0 0.0.0.255 0B、Router(config-router)# network 192.168.10.0 0.0.0.255 area 0C、Router(config-router)# network 192.168.10.0 255.255.255.0 area 0D、Router(config)# router ospf 0E、Router(config)# router ospf 1
Which commands are required to properly configure a router to run OSPF and to add network 192.168.16.0/24 to OSPF area 0?（）A、Router(config)#router ospf 1B、Router(config)#router ospf 0C、Router(config)#router ospf area 0D、Router(config-router)#network 192.168.16.0 0.0.0.255 area 0E、Router(config-router)#network 192.168.16.0 0.0.0.255 0F、Router(config-router)#network 192.168.16.0 255.255.255.0 area 0
A network administrator is trying to add a new router into an established OSPF network.The networks attached to the new router do not appear in the routing tables of the other OSPF routers.Given the information in the partial configuration shown below,what configuration error is causing this problem? （）Router(config)#router ospf 1Router(config-router)#network 10.0.0.0 255.0.0.0 area 0A、The process id is configured improperlyB、The OSPF area is configured improperlyC、The network wildcard mask is configured improperlyD、The network number is configured improperlyE、The AS is configured improperlyF、The network subnet mask is configuerd improperly
什么命令序列将配置一个路由器运行OSPF，并添加网络10.1.1.0/24 area0？（）A、router ospf area 0 network 10.1.1.0 255.255.255.0 area 0B、router ospf network 10.1.1.0 0.0.0.255C、router ospf 1 network 10.1.1.0 0.0.0.255 area 0D、router ospf area 0 network 10.1.1.0 0.0.0.255 area 0E、router ospf network 10.1.1.0 255.255.255.0 area 0F、router ospf 1 network 10.1.1.0 0.0.0.255
多选题Which of the following OSPF commands, when used together, will put the network 192.168.10.0/24 into OSPF area 0?（）ARouter(config-router)# network 192.168.10.0 0.0.0.255 0BRouter(config-router)# network 192.168.10.0 0.0.0.255 area 0CRouter(config-router)# network 192.168.10.0 255.255.255.0 area 0DRouter(config)# router ospf 0ERouter(config)# router ospf 1
单选题某园区网采用OSPF路由协议，参与OSPF的网络地址是169.111.0.0/16，Cisco路由器的正确配置是（ ）。ARounter(config)#router ospf 63Rounter(config-router)#network 169.111.0.0 0.0.0.0 area 0Rounter(config-router)#area 0 range 169.111.0.0 255.255.0.0BRounter(config)#router ospf 63Rounter(config-router)#network 169.111.0.0 255.255.0.0 area 0Rounter(config-router)#area 0 range 169.111.0.0 255.255.0.0CRounter(config)#router ospf 63Rounter(config-router)#network 169.111.0.0 0.0.255.255 area 0Rounter(config-router)#area 0 range 169.111.0.0 255.255.0.0DRounter(config)#router ospf 63Rounter(config-router)#network 169.111.0.0 0.0.255.255 area 0Rounter(config-router)#area 0 range 169.111.0.0 0.0.255.255
多选题Which commands are required to properly configure a router to run OSPF and to add network 192.168.16.0/24 to OSPF area 0?（）ATestKingRouter(config)# router ospf 0BTestKingRouter(config)# router ospf 1CTestKingRouter(config)# router ospf area 0DTestKingRouter(config)# network 192.168.16.0 0.0.0.255 0ETestKingRouter(config)# network 192.168.16.0 0.0.0.255 area 0FTestKingRouter(config)# network 192.168.16.0 255.255.255.0 area 0
多选题Which commands are required to properly configure a router to properly configure a router to run OSPF and to add network 192.168.16.0/24 to OSPF area 0？（）ARouter（config）#router ospf 1BRouter（config）#router ospf 0CRouter（config）#router ospf area 0DRouter（config-router）#network 192.168.16.0 0.0.0.255 area 0ERouter（config-router）#network 192.168.16.0 0.0.0.255 0FRouter（config-router）#network 192.168.16.0 255.255.255.0 area 0
单选题什么命令序列将配置一个路由器运行OSPF，并添加网络10.1.1.0/24 area0？（）Arouter ospf area 0 network 10.1.1.0 255.255.255.0 area 0Brouter ospf network 10.1.1.0 0.0.0.255Crouter ospf 1 network 10.1.1.0 0.0.0.255 area 0Drouter ospf area 0 network 10.1.1.0 0.0.0.255 area 0Erouter ospf network 10.1.1.0 255.255.255.0 area 0Frouter ospf 1 network 10.1.1.0 0.0.0.255
多选题Which two of these steps are minimum requirements to configure OSPFv3 under IPv6？（）AConfigure a routing process using the command ipv6 router ospf [process-id].BAdd the network statement for the interfaces on which OSPF will run.CConfigure OSPF on the interface that it will run on.DUse the passive-interface command on the interfaces on which OSPF should not run.EEnable routing.
单选题A network administrator is trying to add a new router into an established OSPF network.The networks attached to the new router do not appear in the routing tables of the other OSPF routers.Given the information in the partial configuration shown below,what configuration error is causing this problem?（） Router(config)#router ospf 1 Router(config-router)#network 10.0.0.0 255.0.0.0 area 0AThe process id is configured improperlyBThe OSPF area is configured improperlyCThe network wildcard mask is configured improperlyDThe network number is configured improperlyEThe AS is configured improperlyFThe network subnet mask is configuerd improperly
单选题You try to add a new router into the established Testking OSPF network. The networks attached to the new router do not appear in the routing tables of the other OSPF routers.The new router was configured for OSPF in the following way: Router(config)# router ospf 99 Router(config-if)# network 10.0.0.0 255.0.0.0 area 0 Based on this information, what is the most likely problem?（）AThe process id is configured improperly.BThe OSPF area is configured improperly.CThe network wildcard mask is configured improperly.DThe network number is configured improperly.EThe AS is configured improperly.FThe network subnet mask is configured improperly.GAll of the above are likely problems.
多选题Which commands are required to properly configure a router to properly configure a router to run OSPFand to add network 192.168.16.0/24 to OSPF area 0？（）ARouter（config）#router ospf 1BRouter（config）#router ospf 0CRouter（config）#router ospf area 0DRouter（config-router）#network 192.168.16.0 0.0.0.255 area 0ERouter（config-router）#network 192.168.16.0 0.0.0.255 0FRouter（config-router）#network 192.168.16.0 255.255.255.0 area 0
多选题A router has been configured with the commands router os pf 9, network 172.16.1.0 0.0.0.255 area 8, and network 172.16.0.0 0.0.255.255 area 9, in that order. No other OSPF -related commands have been configured. The answers list the IP addresses that could be assigned to this router's Fa0/0 interface. Which an swers list an IP address/prefix length that would cause the router to put Fa0/0 into area 9?（）A172.16.0.1/23B172.16.1.1/26C172.16.1.1/24D172.16.0.255/23ENone of the other answers is correct.
多选题Which commands are required to properly configure a router to run OSPF and to add network 192.168.16.0/24 to OSPF area 0?（）ARouter(config)#router ospf 1BRouter(config)#router ospf 0CRouter(config)#router ospf area 0DRouter(config-router)#network 192.168.16.0 0.0.0.255 area 0ERouter(config-router)#network 192.168.16.0 0.0.0.255 0FRouter(config-router)#network 192.168.16.0 255.255.255.0 area 0