A new router, named TK1, is being installed. You wish to add this router to your existing OSPF network. In doing so, you configure the following: TK1(config)# router ospf 1 TK1(config-router)# network 10.10.10.0 255.255.255.0 area 0 After making this change, you notice that the networks attached to TK1 are not being learned by the other OSPF routers. What could be the cause of this?（）A、The AS is not correctly configuredB、The network subnet mask is incorrectly configuredC、The network wildcard mask is configured incorrectlyD、The network number is not correctly configuredE、The process id is configured incorrectlyF、None of the above
A new router, named TK1, is being installed. You wish to add this router to your existing OSPF network. In doing so, you configure the following: TK1(config)# router ospf 1 TK1(config-router)# network 10.10.10.0 255.255.255.0 area 0 After making this change, you notice that the networks attached to TK1 are not being learned by the other OSPF routers. What could be the cause of this?（）
- A、The AS is not correctly configured
- B、The network subnet mask is incorrectly configured
- C、The network wildcard mask is configured incorrectly
- D、The network number is not correctly configured
- E、The process id is configured incorrectly
- F、None of the above
相关考题：
Why might the Ezonexam network administrator set the configuration register to 0x2142 on a 2600 series Cisco router?A．To boot the IOS from ROMB．To reset the console passwordC．To upload a new version of the configuration fileD．To upload a new version of the IOSE．To allow a new memory upgrade to be recognized by the router
There are three routers on a Gigabit Ethernet LAN: Router A, Router B, and Router C. Router A is the Designated Intermediate System (DIS) at Level 1 for that LAN. Router A‘s DIS priority is 64. The LAN is a Level 1-only link. Router D has just been powered up on that same LAN and its DIS priority is 80.Which statement is true?（）A. Router A remains the DIS and generates a new pseudonode LSP for that LANB. Router A remains the DIS and NO new pseudonode LSP is generated for that LANC. Router D becomes the new DIS, generates a new pseudonode LSP for that LAN, and purges the old pseudonode LSP generated by Router AD. Router D becomes the new DIS, does NOT generate a new pseudonode LSP for that LAN, and does NOT purge the old pseudonode LSP generated by Router A
You are preparing to create a point to point WAN by connecting a Cisco router with a Juniper router by way of their serial links. Which one of the following commands would you use?() A. TK1(config-if)# encapsulation hdlc ansiB. TK1(config-if)# encapsulation pppC. TK1(config-if)# encapsulation LAPDD. TK1(config-if)# encapsulation frame-relay ietfE. TK1(config)#encapsulation ppp
You‘re working at TestKing as a network administrator when your MCSE assistant calls you for help. He has attempted to configure Router TK1 and incorrectly configured the router interface with a subnet broadcast address. You have to correct this by first removing the incorrect IP address and then re-entering the first usable IP address of the same subnet.How will you do this?（）A.B.C.D.E.
A new router, named TK1, is being installed. You wish to add this router to your existing OSPF network. In doing so, you configure the following:TK1(config) router ospf 1TK1(config-router) network 10.10.10.0 255.255.255.0 area 0After making this change, you notice that the networks attached to TK1 are not being learned by the other OSPF routers. What could be the cause of this?（）A. The AS is not correctly configuredB. The network subnet mask is incorrectly configuredC. The network wildcard mask is configured incorrectlyD. The network number is not correctly configuredE. The process id is configured incorrectlyF. None of the above
You need to upgrade the IOS of an existing router on your network. The new IOS image is located on a TFTP server that you have set up within the network. What command should you issue in order to download the new IOS version?（）A. Router# copy tftp flashB. Router# copy flash runC. Router(config)# restore flashD. Router(config)# repair flashE. Router#copy flash tftpF. Router# copy start flash
You need to upgrade the IOS of an existing router on your network. The new IOS image is located on a TFTP server that you have set up within the network. What command should you issue in order to download the new IOS version?（）A、Router# copy tftp flashB、Router# copy flash runC、Router(config)# restore flashD、Router(config)# repair flashE、Router#copy flash tftpF、Router# copy start flash
What protocol specified by RFC 1256 will allow an enabled IP host a new router when a router becomes unavailable？ （）A、 IRDPB、 SNMPC、 HSRPD、 VRRP
You just purchased a refurbished router that contains a configuration from a previous deployment. What should you do, before entering a new configuration into the router?（）A、RAM should be erased and the router restarted.B、Flash should be erased and the router restarted.C、NVRAM should be erased and the router restarted.D、The new configuration should be entered and saved.
设X=8，Y=5表达式的值为真的是（）。A、（XY）AND"BEIJING"$"BEI"B、（XY）AND"BEI"$"BEIJING"C、（XY）OR"BEI"$"BEIJING"D、（XY）OR"BEIJING"$"BEI"
You are preparing to create a point to point WAN by connecting a Cisco router with a Juniper router by way of their serial links. Which one of the following commands would you use?（）A、TK1(config-if)# encapsulation hdlc ansiB、TK1(config-if)# encapsulation pppC、TK1(config-if)# encapsulation LAPDD、TK1(config-if)# encapsulation frame-relay ietfE、TK1(config)#encapsulation ppp
The command "ip route 192.168.24.64 255.255.255.192 192.168.8.2 100" was configured on a router named TK1. No routing protocols or other static routes are configured on the Corporate router yet.Based on this information, which statement is true about this command?（）A、This command sets a gateway of last resort for the TK1 router.B、The number 100 indicates the number of hops to the destination network.C、The interface with IP address 192.168.8.2 is on the TK1 router.D、The command creates a static route for all IP traffic with the source address 192.168.24.64.E、Packets destined for host 192.168.24.124 will be sent to 192.168.8.2.F、None of the above
A network administrator is trying to add a new router into an established OSPF network.The networks attached to the new router do not appear in the routing tables of the other OSPF routers.Given the information in the partial configuration shown below,what configuration error is causing this problem? （）Router(config)#router ospf 1Router(config-router)#network 10.0.0.0 255.0.0.0 area 0A、The process id is configured improperlyB、The OSPF area is configured improperlyC、The network wildcard mask is configured improperlyD、The network number is configured improperlyE、The AS is configured improperlyF、The network subnet mask is configuerd improperly
A new router is added to an existing HSRP standby group. One of the existing routers is in anactive state， the other is in a standby state. Under what circumstance will the new router becomethe active router？（）A、The new router will become active immediately because it’s the newest router introduced intothe groupB、The new router can become active only when the existing active router and the existing standbyrouter become unavailableC、The new router has a lower priority valueD、The new router will never become active unless the existing active router becomes unavailableE、The new router has preempt configured and a higher priorityF、The new router has a higher priority value
There are three routers on a Gigabit Ethernet LAN: Router A, Router B, and Router C. Router A is the Designated Intermediate System (DIS) at Level 1 for that LAN. Router A's DIS priority is 64. The LAN is a Level 1-only link. Router D has just been powered up on that same LAN and its DIS priority is 80. Which statement is true?（）A、Router A remains the DIS and generates a new pseudonode LSP for that LANB、Router A remains the DIS and NO new pseudonode LSP is generated for that LANC、Router D becomes the new DIS, generates a new pseudonode LSP for that LAN, and purges the old pseudonode LSP generated by Router AD、Router D becomes the new DIS, does NOT generate a new pseudonode LSP for that LAN, and does NOT purge the old pseudonode LSP generated by Router A
Your network consists of a single Active Directory domain named contoso.com. All servers run Windows Server 2003 Service Pack 2 (SP2).You plan to deploy a new DNS zone named adatum.com. You need to ensure that only computers in the contoso.com domain can update host records in the new DNS zone. What should you do?（）A、Create a new Active Directory forest named adatum.com. B、Create a new Active Directory-integrated zone named adatum.com. C、Create a new standard primary zone named adatum.com. Disable round robin. D、Create a new standard primary zone named adatum.com. Disable netmask ordering.
You are the network administrator for . The network consists of a single Active Directory domain named All network servers run Windows Server 2003. Some client computers run Windows 2000 Professional, and the rest run Windows XP Professional. All user accounts in the Sales department are located in the Sales organizational unit (OU). To store roaming user profiles, you create a shared folder named Profiles on a member server named TK1. You assign the Allow - Full Control permission on the Profiles folder to the Everyone group. Now you need to create roaming user profiles for the user accounts in the Sales OU. What should you do?（）A、Select all user accounts in the Sales OU. Modify the account properties to specify //TK1/Profiles/%username% as the profile path.B、Select all user accounts in the Sales OU. Modify the account properties to specify //TK1/Profiles as the profile path.C、Create a Group Policy object (GPO) and link it to the Sales OU. In the User Configuration section of the GPO, configure Folder Redirection to use //TK1/Profiles.D、Create a Group Policy object (GPO) and link to the Domain Controllers OU. In the User Configuration section of the GPO, configure Folder Redirection to use //TK1/Profiles.
You are the network administrator for All network servers run Windows Server 2003. A member server named TK1 hosts several hundred folders, which are located on multiple volumes on the server. A backup job on TK1 is configured to run a normal backup of the folders every Saturday at 1:00 A.M. On Wednesday morning, you discover that you need to install a new application on TK1 before the close of business that day. You need to back up all folders on TK1 as quickly as possible so you can install the new application. What should you do?（）A、Create a new backup job that specifies the folders and runs once only.B、Run the existing backup job.C、Enable Volume Shadow Copy for the volumes that contain the folders.D、Create an Automated System Recovery (ASR) set.
You have a single network segment. All servers run Windows Server 2003 Service Pack 2 (SP2). You have a DHCP server named Server1. Client computers receive IP addresses from Server1. You add a second network segment separated by a RFC 1542-compliant router. You need to ensure that computers in the new network segment can receive their IP configurations from Server1. You make the appropriate configuration changes on the router. What should you do on Server1?（）A、Create a new scope.B、Configure a DHCP Relay Agent.C、Add an Extensions Path scope option.D、Create a new exclusion range in the existing scope.
You are the network administrator for The network consists of a single Active Directory domain named All network servers run Windows Server 2003. A member server named TK1 contains a large number of files that are frequently accessed by network users. Users report unacceptable response times on TK1. You compare the current performance of TK1 to a system performance baseline that you created several weeks ago. You decide that TK1 needs a higher-performance network adapter. After you add the appropriate network adapter, users report satisfactory performance. You need to gather new server performance data so you can establish a new performance baseline for TK1. You open the Performance console. What should you do next?（）A、Add all counters for the Network Interface object to the System Monitor object.B、Create a new trace log object. Under Events logged by system provider in the new object, select the Network TCP/IP setting. Start the trace log.C、Create a new counter log object. Add all counters for the Network Interface object to the new object. Start the counter.D、Create a new alert object.
单选题The command "ip route 192.168.24.64 255.255.255.192 192.168.8.2 100" was configured on a router named TK1. No routing protocols or other static routes are configured on the Corporate router yet.Based on this information, which statement is true about this command?（）AThis command sets a gateway of last resort for the TK1 router.BThe number 100 indicates the number of hops to the destination network.CThe interface with IP address 192.168.8.2 is on the TK1 router.DThe command creates a static route for all IP traffic with the source address 192.168.24.64.EPackets destined for host 192.168.24.124 will be sent to 192.168.8.2.FNone of the above
单选题You just purchased a refurbished router that contains a configuration from a previous deployment. What should you do, before entering a new configuration into the router?（）ARAM should be erased and the router restarted.BFlash should be erased and the router restarted.CNVRAM should be erased and the router restarted.DThe new configuration should be entered and saved.
单选题A new router is added to an existing HSRP standby group. One of the existing routers is in anactive state， the other is in a standby state. Under what circumstance will the new router becomethe active router？（）AThe new router will become active immediately because it’s the newest router introduced intothe groupBThe new router can become active only when the existing active router and the existing standbyrouter become unavailableCThe new router has a lower priority valueDThe new router will never become active unless the existing active router becomes unavailableEThe new router has preempt configured and a higher priorityFThe new router has a higher priority value
单选题There are three routers on a Gigabit Ethernet LAN: Router A, Router B, and Router C. Router A is the Designated Intermediate System (DIS) at Level 1 for that LAN. Router A's DIS priority is 64. The LAN is a Level 1-only link. Router D has just been powered up on that same LAN and its DIS priority is 80. Which statement is true?（）ARouter A remains the DIS and generates a new pseudonode LSP for that LANBRouter A remains the DIS and NO new pseudonode LSP is generated for that LANCRouter D becomes the new DIS, generates a new pseudonode LSP for that LAN, and purges the old pseudonode LSP generated by Router ADRouter D becomes the new DIS, does NOT generate a new pseudonode LSP for that LAN, and does NOT purge the old pseudonode LSP generated by Router A
单选题You try to add a new router into the established Testking OSPF network. The networks attached to the new router do not appear in the routing tables of the other OSPF routers.The new router was configured for OSPF in the following way: Router(config)# router ospf 99 Router(config-if)# network 10.0.0.0 255.0.0.0 area 0 Based on this information, what is the most likely problem?（）AThe process id is configured improperly.BThe OSPF area is configured improperly.CThe network wildcard mask is configured improperly.DThe network number is configured improperly.EThe AS is configured improperly.FThe network subnet mask is configured improperly.GAll of the above are likely problems.
单选题What protocol specified by RFC 1256 will allow an enabled IP host a new router when a router becomes unavailable？ （）A IRDPB SNMPC HSRPD VRRP
单选题A new router, named TK1, is being installed. You wish to add this router to your existing OSPF network. In doing so, you configure the following: TK1(config)# router ospf 1 TK1(config-router)# network 10.10.10.0 255.255.255.0 area 0 After making this change, you notice that the networks attached to TK1 are not being learned by the other OSPF routers. What could be the cause of this?（）AThe AS is not correctly configuredBThe network subnet mask is incorrectly configuredCThe network wildcard mask is configured incorrectlyDThe network number is not correctly configuredEThe process id is configured incorrectlyFNone of the above