单选题You try to add a new router into the established Testking OSPF network. The networks attached to the new router do not appear in the routing tables of the other OSPF routers.The new router was configured for OSPF in the following way: Router(config)# router ospf 99 Router(config-if)# network 10.0.0.0 255.0.0.0 area 0 Based on this information, what is the most likely problem?()AThe process id is configured improperly.BThe OSPF area is configured improperly.CThe network wildcard mask is configured improperly.DThe network number is configured improperly.EThe AS is configured improperly.FThe network subnet mask is configured improperly.GAll of the above are likely problems.
单选题
You try to add a new router into the established Testking OSPF network. The networks attached to the new router do not appear in the routing tables of the other OSPF routers.The new router was configured for OSPF in the following way: Router(config)# router ospf 99 Router(config-if)# network 10.0.0.0 255.0.0.0 area 0 Based on this information, what is the most likely problem?()
A
The process id is configured improperly.
B
The OSPF area is configured improperly.
C
The network wildcard mask is configured improperly.
D
The network number is configured improperly.
E
The AS is configured improperly.
F
The network subnet mask is configured improperly.
G
All of the above are likely problems.
参考解析
解析:
暂无解析
相关考题:
You are the administrator for your company's network. The network is configured as shown in the exhibit.You want to install Windows 2000 Professional on 20 new PXE-compliant computers on the marketing segment of your network. The new computers do not have operating systems installed.You create a RIS image. You load the image onto the RIS server. You then start the new computers.You find that the new computers cannot connect to the RIS server. You verify that the new computers cannot connect to the RIS server. You verify that the existing client computers in the network can connect to the network servers, including the RIS server. You want to enable the new computers to connect to the RIS server.What should you do?A.Add a Windows 2000 Server computer running WINS to the network.B.Add a Windows 2000 Server computer running DHCP to the network.C.Add the domain Everyone group to the RIS OS image security settings.D.Place the new computers on the same segment as the RIS server.
You are the network administrator for The network consists of asingle DNS domain named.You replace a UNIX server with a Windows Server 2003 computer namedTestKing1.TestKing1 is the DNS server and start authority (SOA) for testking.com. A UNIXserver named TestKing2 is the mail server for testking.com.You receive reports that Internet users cannot send e-mail to the testking.comdomain. The host addresses are shown in the following window.You need to ensure that Internet users can send e-mail to the testking.com domain.What should you do?()A. Add an _smtp service locator (SRV) DNS record for TestKing2.B. Add a mail exchange (MX) DNS record for TestKing2.C. Add an alias (CNAME) record for mail.testking.com.D. Enable the SMTP service on TestKing1.
A customer wants to TFTP a new image from the corporate network to Flash on the Teleworker router through the IPSec tunnel. How should you configure the Teleworker router?()A、No additional steps are required. B、Add the appropriate source-interface command. C、The router cannot access a server in the Enterprise Campus network. D、The Teleworker Router does not have any client applications; therefore this type of request is not possible.
You need to upgrade the IOS of an existing router on your network. The new IOS image is located on a TFTP server that you have set up within the network. What command should you issue in order to download the new IOS version?()A、Router# copy tftp flashB、Router# copy flash runC、Router(config)# restore flashD、Router(config)# repair flashE、Router#copy flash tftpF、Router# copy start flash
You are trying to bring up a new Testking location onto your existing frame relay network. The new location is using an Adtran router and you are having difficulties getting the site to connect via frame to your Cisco HQ router. What is the most likely cause of the problem?()A、Mismatched LMI types.B、Incompatible encapsulation types.C、Mismatching IP addresses.D、Incorrect DLCI.E、None of the above
You are the network administrator for Active Directory domain. The domain includes Windows Server 2003 domain controllers and Windows XP Professional client computers. A new administrator named Sandra is hired to assist you in deploying Windows XP Professional to 100 new computers. Sandra installs the operating system on a new computer named TestKing11. However, when Sandra tries to log on to the domain from TestKing11, she is unsuccessful. The logon dialog box does now allow her to view and select the domain name. You need to ensure that Sandra can log on to the domain from TestKing11. What should you do?()A、Enable the computer account for Testking11.B、Configure TestKing11 as a member of the domain.C、Add Sandra's user account to the Enterprise Admins group.D、Add Sandra's user account to the Server Operators group.
You share your computer with other users. You install a new Microsoft Windows Internet Explorer add-on to view videos on the computer. You discover that this add-on conflicts with existing add-ons that other users frequently require. You need to ensure that you are able to view videos without affecting other users. What should you do?()A、Uninstall the new Windows Internet Explorer add-on.B、Log on as an administrator and disable the new Windows Internet Explorer add-on.C、Direct other users to log on and disable the new Windows Internet Explorer add-on.D、Select the Turn off Automatic Website Checking option for the Phishing filter.
You work as the enterprise exchange administrator at TestKing.com. The TestKing.com network consistsof an Active Directory forest that contains a single domain named testking.com. TestKing.com has anExchange Server 2010 organization. For the future, you envisage to add a new domain to the forest as well as deploying the Exchange Server2010 servers in the domain. A TestKing.com employee named Andy Reid that is a member of an ActiveDirectory group. You have received instructions from the CIO to allow Andy Reid to install ExchangeServer 2010 servers in the new domain. You thus nedd to identify the appropriate group to which AndyReid should be assigned()A、You should add Andy Reid to the Server Operators group.B、You should add Andy Reid to the Domain Admins group.C、You should add Andy Reid to the Enterprise Admins group.D、You should add Andy Reid to the Exchange Install Domain Servers group.
A network administrator is trying to add a new router into an established OSPF network.The networks attached to the new router do not appear in the routing tables of the other OSPF routers.Given the information in the partial configuration shown below,what configuration error is causing this problem? ()Router(config)#router ospf 1Router(config-router)#network 10.0.0.0 255.0.0.0 area 0A、The process id is configured improperlyB、The OSPF area is configured improperlyC、The network wildcard mask is configured improperlyD、The network number is configured improperlyE、The AS is configured improperlyF、The network subnet mask is configuerd improperly
You work as the enterprise exchange administrator at TestKing.com. TestKing.com makes use of Microsoft Exchange Server messaging solution. The TestKing.com network consists of a single ActiveDirectory domain named testking.com. TestKing.com is configured to run in an Exchange 2010 environment. A new TestKing.com security policyrequires that only approved mobile devices can connect via the Exchange ActiveSync. You have receivedinstructions from the CIO to stop specified mobile devices to connect to the Exchange servers. What should you do?()A、The best option is to create a new Exchange ActiveSync device access role.B、The best option is to create a new Exchange ActiveSync policy.C、The best option is to create a new client throttling policy.D、The best option is to create a new Microsoft Server ActiveSync virtual directory.
You are the network administrator for TestKing. The network consists of a single Active Directory domain named testking.com. All domain controllers run Windows Server 2003. The sales department recently hired 10 new employees. User accounts for these employees were created in Active Directory. The manager of the sales department sent you a list of a new users and asked you to add the user accounts to an existing global group named SalesDept. You need to add the users to the SalesDept global group. What are two possible ways to achieve this goal? Each correct answer presents a complete solution. Choose two.()A、Use the dsadd user command to add the user accounts to the SalesDept global group.B、Use the dsadd group command to add the user accounts to the SalesDept global group.C、In Active Directory Users and Computers, select all 10 user accounts. Right-click the selected users, and then select the Properties menu command.D、In Active Directory Users and Computers, select all 10 user accounts. Right-click the selected users, and then select the Add to a Group menu command.
You are the network administrator for Testking.com. The network consists of a single Active Directory forest that contains three domains. The functional level of the forest is Windows Server 2003. The domain names are testking.com, europe.testking.com, and asia.testking.com. Each domain contains 500 user accounts. TestKing.com is in the process of acquiring several other companies whose networks will be add to the testking.com Windows Server 2003 domain. These acquisitions will entail the addition of several new offices, which will be connected to TestKing's network by means of dedicated 56-Kbps WAN connections. You create a new shared folder named NewProjects on a file server in testking.com. Several users in each existing domain need access to the NewProjects folder. These users are not in the same group in any domain. All users who need access to the NewProjects folder must be able to add, delete, and modify files and folders in the NewProjects folder. Users in the acquired companies also will require access to this folder. You need to create the required Active Directory groups and configure the required permissions for the NewProjects folder. Your solution must minimize ongoing administrative effort as you add new companies to the network. You must also minimize unnecessary traffic across the WAN connections. What should you do?()A、Create a single universal security group. Add all users that require access to the folder to the group. Create a domain local group in the testking.com domain. Add the universal group to the domain local group. Assign permissions to the shared folder by using the domain local group.B、Create a global security group in each domain. Add all users that require access to the folder to the global group in their domain. Create a domain local group in testking.com domain. Add the global groups to the domain local group. Assign permissions to the shared folder by using the domain local group.C、Create a universal security group in each domain. Add all users that require access to the folder to the group in their domain. Assign permissions to the shared folder by using the universal groups.D、Create a global security group in each domain. Add all users that require access to the folder to the group in their domain. Assign permissions to the shared folder by using the global groups.
You are the network administrator for The network consists of a single Active Directory domain named All network servers run Windows Server 2003. A member server named TestKing17 hosts several shared folders. Users report that they receive an error message when they try to connect to the shared folders. The error message states: "No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept." How should you solve the problem?()A、Add an additional network adapter to TestKing17. Configure a network bridge between the new network adapter and the original network adapter.B、Purchase additional per-seat licenses for TestKing17. In Control Panel on TestKing17, run the Licensing application. Add the additional licenses to TestKing17.C、Disable quota management on TestKing17.D、In Active Directory Sites and Services, select the site that contains TestKing17. Add an additional Active Directory connection object to the domain controller for the site.
You have a single network segment. All servers run Windows Server 2003 Service Pack 2 (SP2). You have a DHCP server named Server1. Client computers receive IP addresses from Server1. You add a second network segment separated by a RFC 1542-compliant router. You need to ensure that computers in the new network segment can receive their IP configurations from Server1. You make the appropriate configuration changes on the router. What should you do on Server1?()A、Create a new scope.B、Configure a DHCP Relay Agent.C、Add an Extensions Path scope option.D、Create a new exclusion range in the existing scope.
You work as the enterprise exchange administrator at TestKing.com. TestKing.com makes use of Microsoft Exchange Server messaging solution. The TestKing.com network consists of a single ActiveDirectory domain named testking.com. TestKing.com is configured to run an exchange 2010 environment. TestKing.com contains an Exchange Server 2010 Hub Transport server named TESTKING-EX10 and athird party server TESTKING-EX11 that host a mission critical application. However, during a routinemonitoring you become aware of that the mission critical application is not able to authenticate to remoteservers. You have received instructions form the CIO to make sure that the mission critical application cansend e-mail messages with the use of TESTKING-EX10. What should you do?()A、The best option is to create a new Receive connector and put the TCP/IP adress of TESTKING-EX11 to the Receive connector.Thereafter, change the Receive connector’s permissions.B、The best option is to add the TCP/IP address of TESTKING-EX11 to the default Receive connector.Thereafter you need to set up a message classification and a transport rule.C、The best option is to add the TCP/IP address of TESTKING-EX11 to the client Receive connector.Thereafter you need to set up a remote domain and a transport rule.D、The best option is to create a new Send connector and put the TCP/IP address of TESTKING-EX11 to the Send connector.Thereafter, change the Send connector’s permissions.
You are the network administrator for TestKing.com. The network consists of a single Active Directory domain named testking.com. All network servers run Windows Server 2003. You place computer accounts for servers in OUs that are organized by server roles. You apply GPOs to these servers at the OU level. You need to add a new server to the domain. You need to ensure that the appropriate GPOs are applied to this server. What should you do?()A、Prestage a domain computer account for the new server in the appropriate OU. Join the server to the domain by using the prestaged computer account.B、On the server, add the domain name for the Active Directory domain to the DNS suffix setting. Join the server to the domain.C、Assign a user account the Allow - Create permission for the appropriate OU. Join the new server to the domain by using the user account.D、Join the new server to the Active Directory domain. On the new server, run the gpupdate /force command.
A Windows Communication Foundation (WCF) service implements a contract with one-way and request-reply operations.The service is exposed over a TCP transport. Clients use a router to communicate with the service. The router is implemented as follows. (Line numbers are included for reference only.) 01 ServiceHost host = new ServiceHost(typeof(RoutingService)); 02 host.AddServiceEndpoint( 03 typeof(ISimplexDatagramRouter), 04 new NetTcpBinding( ), "net.tcp://localhost/Router" 05 ); 06 List lep = new List( ); 07 lep.Add( 08 new ServiceEndpoint( 09 ContractDescription.GetContract( 10 typeof(ISimplexDatagramRouter) 11 ), 12 new NetTcpBinding( ), 13 new EndpointAddress("net.tcp://localhost:8080/Logger") 14 ) 15 ); 16 RoutingConfiguration rc = new RoutingConfiguration( ); 17 rc.FilterTable.Add(new MatchAllMessageFilter( ), lep); 18 host.Description.Behaviors.Add(new RoutingBehavior(rc));Request-reply operations are failing. You need to ensure that the router can handle one-way and request-reply operations.What should you do?() A、Change line 03 as follows: typeof(IRequestReplyRouter),B、Change line 03 as follows: typeof(IDuplexSessionRouter),C、Change line 10 as follows: typeof(IRequestReplyRouter)D、Change line 10 as follows: typeof(IDuplexSessionRouter)
You are the network administrator for Testking.com. The TestKing network contains seven application servers. Each application server runs a database application named TestKingApp. Requirements for TestKingApp state that when you add a new user, you must add the user to the server that has the most available disk space. You need to ensure that you meet the requirements when you add new users to TestKingApp. What should you do?()A、Use Event Viewer to review the application logs on each of the seven servers.B、Use Performance Logs and Alerts to record the PhysicalDisk object on all seven servers.C、Use Task Manager to view the performance data on each of the seven servers.D、Use System Monitor to generate a histogram view of the LogicalDisk object on all seven servers.
You are the network administrator for . The network consists of asingle Active Directory domain named. All network servers run Windows Server 2003. Terminal Services is installed on your network. You currently use a terminal server farm. Testking1, the first server in the farm, acts as the session directory server. All terminal servers are operating at maximum capacity. An increasing number of users report slow response times when they use these servers. You need to improve the performance of the terminal server farm. You plan to use a server named Testking4, which has hardware identical to that of the other terminal servers in the farm. First, you add Tesking4 to the Session Directory Computers group on Testking1. What should you do next?()A、Add Testking4 to the Session Directory Computers group on the PDC emulator.B、On Testking4, select the Terminal Services configuration option to join the existing session directory.C、On Testking4, install the Session Directory service.D、On Testking4, create a new session directory server.
You work as the exchange administrator at TestKing.com. The TestKing.com network contains two ActiveDirectory sites named TestKing1 and TestKing2. TestKing1 and TestKing2 are connected to each other bymeans of a WAN link. You receive notification during the day to plan the deployment of two Exchange Server 2010 Mailbox servers and two Client Access servers at TestKing1 and TestKing2. Every site will include a Client Accessarray. You are instruced to recommend a solution in order to deploy the Hub Transport servers. You have tomake sure that e-mail messages will be delivered to users in other sites if a Hub Transport server shouldbe fail. Your solution should also reduce the amount Exchange servers being deployed as well as supportthe deployment of the Client Access array. What should you do? ()A、Your best option would be ensure that two Hub Transport severs are deployed on two new servers in TestKing1 and TestKing2.B、Your best option would be add the Hub Transport server role to all Mailbox servers.C、Your best option would be to ensure that a Hub Transport server is deployed on a new server.Thereafter the SMTP service should be installed on every Client Access server.D、Your best option would be to add the Hub Transport server role to every Client Access server.
You are the network administrator for TestKing.com Active Directory domain. The domain includes Windows Server 2003 domain controllers and Windows XP Professonal client computers. A new administrator named Sandra is hired to assist you in deploying Windows XP Professional to 100 new computers. Sandra installs the operating system on a new computer named TestKing11. However, when Sandra tries to log on to the domain from TestKing11, she is unsuccessful. The logon box does now allow her to view and select the domain name. You need to ensure that Sandra can log on to the domain from TestKing11. What should you do?()A、Enable the computer account for Testking11.B、Configure TestKing11 as a member of the domain.C、Add Sandra's user account to the Enterprise Admins group.D、Add Sandra's user account to the Server Operators group.
单选题You are the network administrator for The network consists of a single Active Directory domain named All network servers run Windows Server 2003. A member server named TestKing17 hosts several shared folders. Users report that they receive an error message when they try to connect to the shared folders. The error message states: "No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept." How should you solve the problem?()AAdd an additional network adapter to TestKing17. Configure a network bridge between the new network adapter and the original network adapter.BPurchase additional per-seat licenses for TestKing17. In Control Panel on TestKing17, run the Licensing application. Add the additional licenses to TestKing17.CDisable quota management on TestKing17.DIn Active Directory Sites and Services, select the site that contains TestKing17. Add an additional Active Directory connection object to the domain controller for the site.
单选题You work as the enterprise exchange administrator at TestKing.com. The TestKing.com network consistsof an Active Directory forest that contains a single domain named testking.com. TestKing.com has anExchange Server 2010 organization. For the future, you envisage to add a new domain to the forest as well as deploying the Exchange Server2010 servers in the domain. A TestKing.com employee named Andy Reid that is a member of an ActiveDirectory group. You have received instructions from the CIO to allow Andy Reid to install ExchangeServer 2010 servers in the new domain. You thus nedd to identify the appropriate group to which AndyReid should be assigned()AYou should add Andy Reid to the Server Operators group.BYou should add Andy Reid to the Domain Admins group.CYou should add Andy Reid to the Enterprise Admins group.DYou should add Andy Reid to the Exchange Install Domain Servers group.
单选题You are the network administrator for TestKing.com. All network servers run Windows Server 2003. The network includes a file server named Testking1. Testking1 contains a single disk for system files and two SCSI hard disks that comprise a 72-GB mirrored volume with 65 GB of read-only data. Users connect to this data by using shortcuts on their desktops. Testking1 is scheduled for replacement. You have a scheduled maintenance window to complete this task. Before the maintenance window, you build a new server. You need to bring the new server online with current data and re-establish redundancy as quickly as possible. You must also ensure that the desktop shortcuts will continue to function. What should you do?()AName the new server Testking1. Create a new mirrored volume by using two 72-GB disks. Connect Testking2 to the network and copy the data from Testking1. When copying is complete, shut down the old Testking1.BName the new server Testking1. Move both disks from the old Testking1 to the new Testking1. Scan the disks for changes. Import the disks.Connect the new Testking1 to the network.CName the new server Testking1. Break the mirror on the old Testking1. Move one of the disks from the old Testking1 to the new Testking1. Scan the disk for changes. Initialize the disk. Select the spare disk and create the mirror. Connect the new Testking1 to the network.DName the new server Testking1. Remove one of the disks in the mirror from the old Testking1. Move the disk on the new Testking1. Scan the disk for changes. Import the disk, Shut down the old Testking1 and connect the new Testking1 to the network.
单选题You have a single network segment. All servers run Windows Server 2003 Service Pack 2 (SP2). You have a DHCP server named Server1. Client computers receive IP addresses from Server1. You add a second network segment separated by a RFC 1542-compliant router. You need to ensure that computers in the new network segment can receive their IP configurations from Server1. You make the appropriate configuration changes on the router. What should you do on Server1?()ACreate a new scope.BConfigure a DHCP Relay Agent.CAdd an Extensions Path scope option.DCreate a new exclusion range in the existing scope.
单选题A network administrator is trying to add a new router into an established OSPF network.The networks attached to the new router do not appear in the routing tables of the other OSPF routers.Given the information in the partial configuration shown below,what configuration error is causing this problem?() Router(config)#router ospf 1 Router(config-router)#network 10.0.0.0 255.0.0.0 area 0AThe process id is configured improperlyBThe OSPF area is configured improperlyCThe network wildcard mask is configured improperlyDThe network number is configured improperlyEThe AS is configured improperlyFThe network subnet mask is configuerd improperly
单选题You are the network administrator for . All network servers run Windows Server 2003. The network includes a file server named TestKing17. TestKing17 contains a single disk for system files and two SCSI hard disks that comprise a 72-GB mirrored volume with 65 GB of read-only data. Users connect to this data by using shortcuts on their desktops. TestKing17 is scheduled for replacement. You have a scheduled maintenance window to complete this task. Before the maintainance window, you build a new server. You need to bring the new server online with current data and re-establish redundancy as quickly as possible. You must also ensure that the desktop shortcuts will continue to functions. What should you do?()AName the new server TestKing20. Create a new mirrored volume by using two 72-GB disks. Connect TestKing20 to the network and copy the data from TestKing17. When copying is complete, shut down the old TestKing17.BName the new server TestKing17. Move both disks from the old TestKing17 to the new TestKing17. Scan the disks for changes.Connect the new TestKing17 to the network.CName the new server TestKing17. Break the mirror on the old TestKing17. Move one of the disks from the old TestKing17 to the new TestKing17. Scan the disk for changes. Initialize the disk. Select the spare disk and create the mirror. Connect the new TestKing17 to the network.DName the new server TestKing17. Remove one of the disks in the mirror from the old TestKing17. Move the disk to the new TestKing17. Scan the disk for changes. Import the disk. Shut down the old TestKing17 and connect the new TestKing17 to the network.