BGP()与外部AS Router的关系为(),与内部AS Router的关系为()。
BGP()与外部AS Router的关系为(),与内部AS Router的关系为()。
相关考题：
Which set of configuration commands configures MBGP on the ERX Edge Router?() A. router bgp 100 neighbor 192.168.10.1 remote-as 200 address-family ipv4 multicast neighbor 192.168.10.1 next-hop-selfB. router bgp 100 neighbor 192.168.10.1 remote-as 200 address-family vpnv4 multicast neighbor 192.168.10.1 activateC. router bgp 100 neighbor 192.168.10.1 remote-as 200 address-family ipv4 unicast neighbor 192.168.10.1 activeD. router bgp 100 neighbor 192.168.10.1 remote-as 200 address-family ipv4 multicast neighbor 192.168.10.1 activate
What are two examples of RE exception traffic?() A. BGP updates that travel through the local router and are destined for a remote router.B. OSPF hello packets that are sent from a remote router and are destined for the local router.C. Telnet traffic that is sent from a remote host and is destined for the local router.D. Telnet traffic that travels through the local router and is destined for a remote end host.
Refer to the exhibit The neighbor 10.1.1.1 weight 200 BGP configuration command has been configured on router A. What will be the result of this configuration? () A. Router A will prefer the path through router B for network 172.20.0.0B. Router A will prefer the path through router C for network 172.20.0.0C. Packets from router D will prefer the path through router B for networks advertised by router AD. Packets from r outer D will prefer the path through router C for networks advertised by router A
Based on the show ip bgp summary output, which two statements are true?() A. The BGP session to the 10.3.3.3 neighbor is established, but the router has not received any BGP routing updates from the 10.3.3.3 neighbor.B. The router is attempting to establish a BGP peering session with the 10.2.2.2 neighbor.C. The router is attempting to establish a BGP peering session with the 10.1.1.1 neighbor.D. The BGP session to the 10.3.3.3 neighbor is established.E. The BGP session to the 10.2.2.2 neighbor is established.F. The BGP session to the 10.1.1.1 neighbor is established.
Above is the output from show ip bgp neighbors command. What is line 21 stating about the BGP connection?() A. the number of consecutive TCP connections to the specified remote neig hborB. the number of total TCP connections that the router hasC. the number of times the router has established a TCP connectionD. the number of neighbors that the router has
During BGP configuration on a router that has peered with other BGP speakers, the BGP command aggregate-a ddress 172.32.0.0 255.255.252.0 is issued. However, the peers do not receive this aggregate network in BGP advertisements. Also, the router does not have this aggregate network in its BGP table.Which option indicates a possible reason this command did not cause the router to advertise the aggregate network to its peers?（）A. Interface NULL 0 is likely shutdown.B. The next hop IP address must be a loopback address.C. The BGP command no auto - summary is missing.D. The BGP command no synchronization is missing.E. Subnets of 172.32.0.0/22 do not exist in the BGP table.F. The IGP running on this router does not have network 172.32.0.0/22 installed.
Refer to the exhibit. On the basis of the configuration that is provided, how would the BGP updates that come from router R1 be replicated inside autonomous system 65200?() A. All BGP updates that are received on router R 2 will be sent to routers R3 and R4. Routers R3 and R4 will then forward those BGP updates to router R5B. None of the BGP updates that are received on router R2 will ever be received by router R5C. All BGP updates that are received on router R2 will not be sent to routers R3 and R4D. All BGP updates that are received on router R2 will be sent directly to router R5
A router has two paths to reach another network in a different autonomous system. Neither route was generated by the local router and both routes have the same default weight an d local preference values.Which statement is true about how BGP would select the best path?（）A. To influence one route to be preferred, its default local preference value will be changed via the use of the command bgp default local - preference 50B. Th e router will prefer the shortest autonomous system pathC. If the command bgp always - compare - med has been given, then the router will prefer the route with the highest MEDD. The router will prefer the route with the lower MED
In which two ways does the BGP graceful restart capability preserve prefix information during a restart？（）A、The peer router sends an end-of RIB message to the restarting routerB、The peer router immediately removes the BGP routes that it learned from the restarting router from its BGP routing tableC、The restarting router does not remove any stale prefixes after the timer for stale entries expiresD、The router establishes BGP sessions with other routers and relearns the BGP routes from other routers that are also capable of graceful restart. The restarting router waits to receive updates from the neighboring routers. When the neighboring routers send end-of-RIB messages to indicate that they are done sending updates， the restarting router starts sending its own updatesE、The restarting router removes any stale prefixes after the timer for stale entries expires
In BGP routing，what does the rule of synchronization mean？（）A、A BGP router can only advertise an EBGP learned route，provided that the route is an IGP route in the routing table.B、A BGP router can only advertise an IBGP learned route，provided that the route is an IGP route in the routing table.C、A BGP router can only advertise an IBGP learned route，provided that the route is an IGP route that is not in the routing table.D、A BGP router can only advertise an EBGP learned route，provided that the route is a metric of 0 in the BGP table.
Which BGP option i s required when load sharing over multiple equal - bandwidth parallel links from a single CE router to a single ISP router over eBGP?（）A、eBGP MultipathB、eBGP MultihopC、BGP SynchronizationD、Public AS numbers
A router has two paths to reach another network in a different autonomous system. Neither route was generated by the local router and both routes have the same default weight an d local preference values. Which statement is true about how BGP would select the best path?（）A、To influence one route to be preferred, its default local preference value will be changed via the use of the command bgp default local - preference 50B、Th e router will prefer the shortest autonomous system pathC、If the command bgp always - compare - med has been given, then the router will prefer the route with the highest MEDD、The router will prefer the route with the lower MED
SR7750调测BGP邻居状态变化的命令是（）A、debug router bgp openB、debug router bgp eventsC、debug router bgp updateD、debug router bgp packets
Router 1 is configured for BGP as dual-homed on the Cisco network. Which three BGP attributes are carried in every BGP update on this router （both IBGP and EBGP）？（）A、originB、router-IDC、AS-pathD、local-preferenceE、next-hop
In which two ways does the BGP graceful capability preserve prefix information during a restart？（）A、The peer router immediately removes the BGP routers that it learned from the restarting router from itsBGP routing tables.B、The router establishes BGP sessions with other routers and relearns the BGP routes from others that are also capable of graceful restart. The restarting router waits to receive updates from the neighboringrouters. When the neighboring routers send end-of-RIB messages to indicate that they are donesending updates，the restarting router starts sending its own updates.C、The peer router sends an end-of-RIB message to the restarting router.D、The restarting router removes any stale prefixes after the timer for stale entries expires.E、The restarting router does not remove any stale prefixes after the timer for stale entries expires.
Router R-1 is configured for BGP routing as shown below： router bgp 65300network 27.0.0.0neighbor 192.23.1.1 remote-as 65300 From the perspective of router R-1， what kind of router is the router with IP address 192.23.1.1？（）A、A peer router running IBGPB、A peer router running EBGPC、A community member running IBGPD、A peer group member running IBGPE、A peer group member running EBGP
You are configuring new BGP neighbor and want to view the configuration for the interface ge-0/0/0.42.Which command do you use to achieve this result?（）A、[edit protocols bgp group external] user@router# set interfaces ge-0/0/0.42 ?B、[edit protocols bgp group external] user@router# edit show interfaces ge-0/0/0.42C、[edit protocols bgp group external] user@router# top show interfaces ge-0/0/0.42D、[edit protocols bgp group external] user@router# show interfaces ge0/0/0.42
What are two examples of RE exception traffic?（）A、BGP updates that travel through the local router and are destined for a remote router.B、OSPF hello packets that are sent from a remote router and are destined for the local router.C、Telnet traffic that is sent from a remote host and is destined for the local router.D、Telnet traffic that travels through the local router and is destined for a remote end host.
What is the first step in BGP route selection?（）A、The local router prefers the route with the shortest AS Path.B、The local router verifies that it has a route to the BGP Next Hop IP address.C、The local router prefers the route from the peer with the lowest peer ID address.D、The local router prefers the route learned from an EBGP peer over a route learned from an IBGP peer.
单选题What is the first step in BGP route selection?（）AThe local router prefers the route with the shortest AS Path.BThe local router verifies that it has a route to the BGP Next Hop IP address.CThe local router prefers the route from the peer with the lowest peer ID address.DThe local router prefers the route learned from an EBGP peer over a route learned from an IBGP peer.
单选题Router R-1 is configured for BGP routing as shown below： router bgp 65300network 27.0.0.0neighbor 192.23.1.1 remote-as 65300 From the perspective of router R-1， what kind of router is the router with IP address 192.23.1.1？（）AA peer router running IBGPBA peer router running EBGPCA community member running IBGPDA peer group member running IBGPEA peer group member running EBGP
多选题Router 1 is configured for BGP as dual-homed on the Cisco network. Which three BGP attributes are carried in every BGP update on this router （both IBGP and EBGP）？（）AoriginBrouter-IDCAS-pathDlocal-preferenceEnext-hop
单选题In BGP routing， what does the rule of synchronization mean？（）AA BGP router can only advertise an EBGP learned route， provided that the route is an IGP route in the routing table.BA BGP router can only advertise an IBGP learned route， provided that the route is an IGP route in the routing table.CA BGP router can only advertise an IBGP learned route， provided that the route is an IGP route that is not in the routing table.DA BGP router can only advertise an EBGP learned route， provided that the route is a metric of 0 in the BGP table.
多选题In which two ways does the BGP graceful capability preserve prefix information during a restart？（）AThe peer router immediately removes the BGP routers that it learned from the restarting router from itsBGP routing tables.BThe router establishes BGP sessions with other routers and relearns the BGP routes from others that are also capable of graceful restart. The restarting router waits to receive updates from the neighboringrouters. When the neighboring routers send end-of-RIB messages to indicate that they are donesending updates，the restarting router starts sending its own updates.CThe peer router sends an end-of-RIB message to the restarting router.DThe restarting router removes any stale prefixes after the timer for stale entries expires.EThe restarting router does not remove any stale prefixes after the timer for stale entries expires.