单选题A system administrator has set up a Virtual IO Server to manage three micropartitioned LPARs. Physical disks are attached to the Virtual IO Server which is accessed through Multipath IO. What should the administrator know about monitoring for error conditions with virtual disks?（）ABoth permanent and temporary virtual hardware error messages are logged to each client partition sharing the device.BBoth permanent and temporary error messages for virtual hardware are logged at each occurrence on the Virtual IO Server and then propagated to the client partition.CTemporary error messages for virtual hardware are logged at each occurrence on the Virtual IO Server. Permanent error messages for virtual hardware are stored on the client partition.DTemporary error messages for virtual hardware will not necessarily be propagated to the client partition. Permanent error messages for virtual hardware are only logged once on the Virtual IO Server.
单选题
A system administrator has set up a Virtual IO Server to manage three micropartitioned LPARs. Physical disks are attached to the Virtual IO Server which is accessed through Multipath IO. What should the administrator know about monitoring for error conditions with virtual disks?（）
A
Both permanent and temporary virtual hardware error messages are logged to each client partition sharing the device.
B
Both permanent and temporary error messages for virtual hardware are logged at each occurrence on the Virtual IO Server and then propagated to the client partition.
C
Temporary error messages for virtual hardware are logged at each occurrence on the Virtual IO Server. Permanent error messages for virtual hardware are stored on the client partition.
D
Temporary error messages for virtual hardware will not necessarily be propagated to the client partition. Permanent error messages for virtual hardware are only logged once on the Virtual IO Server.
参考解析
解析：
暂无解析
相关考题：
You have a server that runs Windows Server 2008 and has the Windows Server Virtualization （WSv） server role installed. You create a new virtual machine. You need to configure the virtual machine to meet the following requirements： Allow network communications between the virtual machine and the host system. Prevent communications with other network servers. What should you do first？（）A、Install the Microsoft Loopback Adapter.B、Create a new Virtual Network Switch.C、Enable Internet Connection Sharing （ICS）.D、Set the Connection to None for the network interface card.
An administrator has just installed a web server for the company's Internet site. After bringing the system online, customers notify the administrator that they cannot connect to the server. The administrator tests the web server from a workstation and can access the website. The customers continue to report issues. Which of the following is the MOST likely reason for this?（）A、The server's firewall is misconfigured.B、The server's timeout feature is set incorrectly.C、The web server was not installed properly.D、The company firewall is misconfigured.
An administrator has set up a company’s intranet server.Users should be able to access it but nousers are able to.The administrator verifies that the website is accessible by IP address.Which of the following should the administrator look at FIRST to resolve the issue？（）A、WINS serverB、DNS serverC、Lmhosts fileD、DHCP cache
An administrator has just installed a web server for the companys Internet site. After bringing the system online， customers notify the administrator that they cannot connect to the server. The administrator tests the web server from a workstation and can access the website. The customers continue to report issues. Which of the following is the MOST likely reason for this？（）A、 The servers firewall is misconfigured.B、 The server’s timeout feature is set incorrectly.C、 The web server was not installed properly.D、 The company firewall is misconfigured.
An administrator notices that every time a particular server is restarted it requires a password in order for the server to begin the start up process. Which of the following is the reason this is happening？（）A、The server needs to have the password service verified and reconfigured.B、The server administrator has set a password policy in Group Policy.C、The server has the BIOS setting configured incorrectly.D、The server is set with a boot password before accessing the OS
An administrator adds a new SATA hard drive into a functional server and attempts to boot the server. The server will no longer boot into the operating system. The administrator checks all the connections and reboots the server. The server still will not load the operating system. Which of the following is the MOST probable cause？（）A、The BIOS is set with the wrong boot order.B、The jumpers have not been set on the hard drive.C、The hard drive is not compatible with the system board.D、The boot.ini file needs to be modified.
A system administrator needs to specify a set of FQDN to IP address mappings for a legacyserver； the administrator does not want the legacy server to be referenced by other servers. Which of the following should the administrator use to set this？（）A、DHCP serverB、DNS serverC、Host fileD、Route statements
A system administrator has set up a Virtual IO Server to manage three micropartitioned LPARs. Physical disks are attached to the Virtual IO Server which is accessed through Multipath IO. What should the administrator know about monitoring for error conditions with virtual disks?（）A、Both permanent and temporary virtual hardware error messages are logged to each client partition sharing the device.B、Both permanent and temporary error messages for virtual hardware are logged at each occurrence on the Virtual IO Server and then propagated to the client partition.C、Temporary error messages for virtual hardware are logged at each occurrence on the Virtual IO Server. Permanent error messages for virtual hardware are stored on the client partition.D、Temporary error messages for virtual hardware will not necessarily be propagated to the client partition. Permanent error messages for virtual hardware are only logged once on the Virtual IO Server.
Companycom will be using the Virtual IO Server to share both FC and Ethernet adapters among multiple LPARs. The customer is using mostly web services in the LPARs. Which of the following should be considered?（）A、Shared Ethernet Adapters and Virtual SCSI services require separate Virtual IO Servers.B、Virtualized adapters require essentially the same Virtual IO Server resources regardless of adapter type.C、Shared Ethernet Adapters require significantly more Virtual IO Server resources than Virtual SCSI services.D、Virtual SCSI services require significantly more Virtual IO Server resources than Shared Ethernet Adapters.
A client has the need to reboot one of their Virtual IO Servers. What command(s) would be run to list the clients that are dependant on Virtual IO Server disk and network resources?（）A、lsmap -all -netB、lsclient -disk -netC、lsdev -virtual -clientD、lsmap -all; lsmap -net
What type of configuration can provide the best availability in a Virtual IO Server environment?（）A、Provide multiple paths to all resources through 2 or more Virtual IO ServersB、Mirror all disk resources on the Virtual IO Server to present to the client LPARC、Mirror all disk resources on the client LPAR to the shared SCSI on the Virtual IO ServerD、Trunk multiple Ethernet adapters on the Virtual IO Server to a single Shared Ethernet Adapter （SEA）
Company.com has two POWER5 servers. They want the two servers’ virtual Ethernets to appear on the same IP subnet. Which of the following will connect the client virtual Ethernet adapters to the physical Ethernet switch connecting the two servers？（）A、Configure a Shared Ethernet Adapter on the Virtual I/O Server.B、Use the same virtual LAN ID on each LPAR.C、Set up IP routing through an LPAR on each system.D、Set up an IP firewall through an LPAR on each system.
Companycom has successfully established their p5 LPAR environment on a POWER5 p5 590 running AIX 5.2. They are now ready to move to Virtual IO. What would be required to do Virtual IO?（）A、Apply APAR IY62262 to the current AIX 5.2 Maintenance level 04. Virtual IO Server is not required. B、Purchase Advanced POWER Virtualization software, upgrade to AIX 5.3 maintenance level 1 and apply APAR IY60349. Virtual IO Server is not required. C、Verify that there are enough resources to add a Virtual IO Server, upgrade to AIX 5.3 with APAR IY60349, create a Virtual IO Server after applying APAR IY62262. D、Verify that there are enough resources to add a Virtual IO Server, create a Virtual IO Server and apply APAR IY62262, verify that the system is at AIX 5.2 with Maintenance level 04.
Companycom LPAR that is using a Virtual IO Server needs to be more highly available. How can this be accomplished using APV features?（）A、Reallocate the Virtual IO Server disks to the user LPARB、Create a stripe-group within the Virtual IO Server to protect against disk failureC、Reconfigure the user LPAR to use both locally owned disk and a Virtual SCSI diskD、Create a second Virtual IO Server and reconfigure the user LPAR to mirror across both Virtual IO Servers
Companycom is using shared processor LPARs exclusively, including the Virtual IO Server. The users are complaining about response time. The application LPARs can be heavy processor users. The Virtual IO Server has been measured to be processor constrained. How should the Virtual IO Server's shared processor LPAR be configured?（）A、Capped and with a lower shareB、Uncapped and with a lower shareC、Uncapped and with a higher shareD、Capped and with no change in share
The System Administrator has set up shared processors on three partitions in the p5 590 system. The shared processors have been set to uncapped. The system administrator notices that the logical partition is acting like it is capped. What is the most probable cause?（）A、The uncapped weight has been set to 0.B、The uncapped weight has been set to 128.C、The processing unit for that partition was set to .1 processing units. A full processor was assigned.D、The processing unit for that partition was set to 0.50 processing units. A full processor was assigned.
You have been recently hired as a database administrator. Your senior manager asks you to study the production database server and submit a report on the settings done by the previous DBA. While observing the server settings， you find that the following parameter has been set in the parameter file of the database： REMOTE_OS_AUTHENT = TRUE What could have been the reason to set this parameter as TRUE？（）A、to enable operating system authentication for a remote clientB、to restrict the scope of administration to identical operating systemsC、to allow the start up and shut down of the database from a remote clientD、to enable the administration of the operating system from a remote clientE、to disable the administration of the operating system from a remote client
You are using Microsoft System Center Virtual Machine Manager （VMM） 2008 R2 to perform a virtual-to-virtual （V2V） conversion. You need to place the virtual machine （VM） on the host server that has the most available disk I/O. Which two actions should you perform？（）A、Set the placement goal to Load balancing.B、Set the placement goal to Resource maximization.C、Set the resource importance of the disk I/O to Very Important.D、Set the maximum disk I/O per second for the host reserves to 10000.
Companycom wants to use Virtual SCSI disks to boot multiple operating systems from the same disk. How will the volumes appear in the Virtual IO Server and how will the logical volumes appear in the partition?（）A、The Virtual SCSI disks are defined as logical volumes in the Virtual IO Server. The logical volumes appear as real devices (hdisks) in the client partitions. B、The Virtual IO adapters are connected to a virtual host bridge. On the Virtual IO Server they are vdisks, on the client partition, the exported disks are visible as virtual disks. C、The Virtual SCSI disks are represented in the ODM as a bus device whose parent is sysplanar0. Logical volumes will be assigned to the Virtual IO Server and virtual disks, vdisks, in the client partition. D、The Virtual IO adapters are represented as adapter devices with the virtual host bridge as their parent. On the Virtual IO Server they are vdisks attached to vscsi, on the client partition the exported disks are visible as virtual disks.
单选题You have been recently hired as a database administrator. Your senior manager asks you to study the production database server and submit a report on the settings done by the previous DBA. While observing the server settings， you find that the following parameter has been set in the parameter file of the database： REMOTE_OS_AUTHENT = TRUE What could have been the reason to set this parameter as TRUE？（）Ato enable operating system authentication for a remote clientBto restrict the scope of administration to identical operating systemsCto allow the start up and shut down of the database from a remote clientDto enable the administration of the operating system from a remote clientEto disable the administration of the operating system from a remote client
单选题Company.com has two POWER5 servers. They want the two servers’ virtual Ethernets to appear on the same IP subnet. Which of the following will connect the client virtual Ethernet adapters to the physical Ethernet switch connecting the two servers？（）AConfigure a Shared Ethernet Adapter on the Virtual I/O Server.BUse the same virtual LAN ID on each LPAR.CSet up IP routing through an LPAR on each system.DSet up an IP firewall through an LPAR on each system.
单选题Companycom will be using Virtual IO Server to share Ethernet adapters. What can be done to prevent network failure of the client if a Virtual IO Server goes down?（）ACreate two virtual adapters on the client， each one from a separate Virtual IO ServerBEnable dead gateway detection on the client so that the network traffic can be reroutedCHave a spare network card on standby in the client in case the Virtual IO Server goes downDCreate an etherchannel adapter on the client using one Virtual Ethernet adapter from two separate Virtual IO Servers
单选题Companycom will be using the Virtual IO Server to share both FC and Ethernet adapters among multiple LPARs. The customer is using mostly web services in the LPARs. Which of the following should be considered?（）AShared Ethernet Adapters and Virtual SCSI services require separate Virtual IO Servers.BVirtualized adapters require essentially the same Virtual IO Server resources regardless of adapter type.CShared Ethernet Adapters require significantly more Virtual IO Server resources than Virtual SCSI services.DVirtual SCSI services require significantly more Virtual IO Server resources than Shared Ethernet Adapters.
单选题An administrator has just installed a web server for the company's Internet site. After bringing the system online, customers notify the administrator that they cannot connect to the server. The administrator tests the web server from a workstation and can access the website. The customers continue to report issues. Which of the following is the MOST likely reason for this?（）AThe server's firewall is misconfigured.BThe server's timeout feature is set incorrectly.CThe web server was not installed properly.DThe company firewall is misconfigured.
单选题Companycom has a p5 590 that has their production LPAR, their Tivoli Storage Manager (TSM) LPAR, and several other LPARs. What method would provide connectivity between the production LPAR, and the TSM LPAR, but be isolated from the other LPARs in the system without utilizing a Virtual IO Server or physical adapter resources?（）AUse shared memory and semaphores to transfer the data to the TSM LPARBProvide gigabit Ethernet adapters in each LPAR and run a crossover cableCCreate a Virtual Ethernet between the production server and the TSM LPARsDCreate a Virtual Ethernet between the TSM server LPAR and the non-production LPARs
单选题Companycom wants to use Virtual SCSI disks to boot multiple operating systems from the same disk. How will the volumes appear in the Virtual IO Server and how will the logical volumes appear in the partition?（）AThe Virtual SCSI disks are defined as logical volumes in the Virtual IO Server. The logical volumes appear as real devices (hdisks) in the client partitions. BThe Virtual IO adapters are connected to a virtual host bridge. On the Virtual IO Server they are vdisks, on the client partition, the exported disks are visible as virtual disks. CThe Virtual SCSI disks are represented in the ODM as a bus device whose parent is sysplanar0. Logical volumes will be assigned to the Virtual IO Server and virtual disks, vdisks, in the client partition. DThe Virtual IO adapters are represented as adapter devices with the virtual host bridge as their parent. On the Virtual IO Server they are vdisks attached to vscsi, on the client partition the exported disks are visible as virtual disks.
单选题An administrator notices that every time a particular server is restarted it requires a password in order for the server to begin the start up process. Which of the following is the reason this is happening？（）AThe server needs to have the password service verified and reconfigured.BThe server administrator has set a password policy in Group Policy.CThe server has the BIOS setting configured incorrectly.DThe server is set with a boot password before accessing the OS
单选题The System Administrator has set up shared processors on three partitions in the p5 590 system. The shared processors have been set to uncapped. The system administrator notices that the logical partition is acting like it is capped. What is the most probable cause?（）AThe uncapped weight has been set to 0.BThe uncapped weight has been set to 128.CThe processing unit for that partition was set to .1 processing units. A full processor was assigned.DThe processing unit for that partition was set to 0.50 processing units. A full processor was assigned.