单选题The System Administrator has set up shared processors on three partitions in the p5 590 system. The shared processors have been set to uncapped. The system administrator notices that the logical partition is acting like it is capped. What is the most probable cause?（）AThe uncapped weight has been set to 0.BThe uncapped weight has been set to 128.CThe processing unit for that partition was set to .1 processing units. A full processor was assigned.DThe processing unit for that partition was set to 0.50 processing units. A full processor was assigned.
单选题
The System Administrator has set up shared processors on three partitions in the p5 590 system. The shared processors have been set to uncapped. The system administrator notices that the logical partition is acting like it is capped. What is the most probable cause?（）
A
The uncapped weight has been set to 0.
B
The uncapped weight has been set to 128.
C
The processing unit for that partition was set to .1 processing units. A full processor was assigned.
D
The processing unit for that partition was set to 0.50 processing units. A full processor was assigned.
参考解析
解析：
暂无解析
相关考题：
Companycom has seven days of vmstat data on four p5 590 production LPARs of four processors each. The data shows that all four LPARs have periodic utilizations of 90-95% lasting several minutes in duration. However, the average utilizations of the four LPARs were between 15-30%. The vmstat data shows that the peak utilizations of each LPAR do not occur at the same time. Which of the following should be set up?（）A、A shared pool with four capped LPARsB、A shared pool with four uncapped LPARsC、Four dedicated LPARs and use DLPAR to manage resources effectivelyD、The server in SMP mode and use WLM to manage resources effectively
You set up scheduled tasks to run and notify you of any failures. 3 days later you see that none of the tasks ran and you received no notifications. What should you do？（）A、Set the schedule service to run under the administrator account.B、Set the scheduled tasks to run under the administrator account.C、Enable the messenger serviceD、Set the schedule service to run under the local system account and set it to start automatically.
An administrator has added a new device to a system and wants to determine if it has been correctly added to the ODM database. Which command would the system administrator use？（）A、odmgetB、odmaddC、odmshowD、odmcreate
An administrator has set up a company’s intranet server.Users should be able to access it but nousers are able to.The administrator verifies that the website is accessible by IP address.Which of the following should the administrator look at FIRST to resolve the issue？（）A、WINS serverB、DNS serverC、Lmhosts fileD、DHCP cache
An administrator notices that every time a particular server is restarted it requires a password in order for the server to begin the start up process. Which of the following is the reason this is happening？（）A、The server needs to have the password service verified and reconfigured.B、The server administrator has set a password policy in Group Policy.C、The server has the BIOS setting configured incorrectly.D、The server is set with a boot password before accessing the OS
A system administrator receives a new server and has booted the system for the first time. The administrator has set up the terminals and users. The user start to log on. Root is logged in on the console. When additional users start to log in, an error is displayed stating that All available login sessions are in use. Which of the following steps should be followed to resolve this problem?（）A、Permissions on /etc/security were changed in error; do a chmod 755 on /etc/security directory.B、Increase the number of licenses; using smit chaili censeC、Change the Maximum number of PROCESSES allowed per user variable; using smit chgsys.D、Change User can logi field from false to true: using smit chuser.
After mirroring rootvg, a system administrator wants to validate that the system will boot correctly. Which of the following tasks must be performed before changing the boot order?（）A、Run a bosboot -a commandB、Mirror the hd5 on the two disksC、Set up another service mode bootlistD、Check the disks using a lsvg -p rootvg command
Company.com has ordered an 8-way p5-570 and plans to deploy four AIX 5L v5.3 LPARs. The pre-installation system design has all eight processors being placed in the shared processor pool， and four Micro-Partitions being assigned resources from the pool. Prior to the implementation of the system， the customer informs the technical specialist that one of the applications is only supported on AIX 5L 5.2. Which of the following changes to the system design should the technical specialist make to accommodate this change？（）A、Create all the partitions as AIX 5.2， each having two dedicated processors.B、Purchase a system with two additional processors that can be assigned to the AIX 5.2 Partition.C、Specify an AIX 5.2 partition using dedicated processors， reducing the number of processors in the shared pool.D、Use the virtual I/O server to manage the disks and network connections removing the need for different levels of device drivers.
Companycom has seven days of vmstat data on a p5 590. The server has a total of four test/dev LPARs and 4 production LPARs of one processor each. On the four test/dev LPARs, the data shows 90-95% peak utilizations with a duration of from 5 to 10 minutes. The average utilizations of all LPARs were between 15-30%. All of the applications have different times when they peak. What is the best configuration to fully utilize the processor resource?（）A、Set up the server in SMP mode and use WLM to manage resources effectivelyB、Set up eight dedicated LPARs and use DLPAR to manage resources effectivelyC、Set up a shared pool with eight capped LPARs including production and test/devD、Set up a shared pool with eight uncapped LPARs with priority weight to Production
A system administrator for a business recovery service center needs to test disaster recovery strategies for their clients running Linux. Each client has a different system configuration. Each time a client comes in, the system configuration of the managed system must change. What is the best way to handle this using LPAR?（）A、Create a system profile. Reconfigure the managed system by activating and deactivating the system profiles. B、Create one partition profile for each client. Reconfigure the managed system by activating the partition profiles for that client. C、Dynamically move processors and memory as needed into each logical partition. Reconfigure the managed system by activating and deactivating partition profiles. D、Dynamically move processors and memory into each logical partition on the server if additional resources are needed. Reconfigure the managed system by activating and deactivating the system profiles.
On a Hardware Management Console （HMC） at version 7， an administrator has an LPAR defined with a minimum of 0.1 processors and a maximum of 4 processors. The administrator wants to go from 1 processing unit to 3 processing units for this partition. In order to make the change， what value should the administrator enter into the add processor resources window？ （）A、 2B、 3C、 1.0D、 2.9
Company.com has two POWER5 servers. They want the two servers’ virtual Ethernets to appear on the same IP subnet. Which of the following will connect the client virtual Ethernet adapters to the physical Ethernet switch connecting the two servers？（）A、Configure a Shared Ethernet Adapter on the Virtual I/O Server.B、Use the same virtual LAN ID on each LPAR.C、Set up IP routing through an LPAR on each system.D、Set up an IP firewall through an LPAR on each system.
When configuring Micro-Partitioning into shared processor partitions, what limitations should be considered?（）A、Shared processors never affect AIX 5L affinity management.B、Shared processors can only be implemented with AIX and not with Linux or i5OS.C、A mix of dedicated and shared processors within the same partition is supported.D、A mix of dedicated and shared processors within the same partition is not supported.
The System Administrator has set up shared processors on three partitions in the p5 590 system. The shared processors have been set to uncapped. The system administrator notices that the logical partition is acting like it is capped. What is the most probable cause?（）A、The uncapped weight has been set to 0.B、The uncapped weight has been set to 128.C、The processing unit for that partition was set to .1 processing units. A full processor was assigned.D、The processing unit for that partition was set to 0.50 processing units. A full processor was assigned.
You have been recently hired as a database administrator. Your senior manager asks you to study the production database server and submit a report on the settings done by the previous DBA. While observing the server settings， you find that the following parameter has been set in the parameter file of the database： REMOTE_OS_AUTHENT = TRUE What could have been the reason to set this parameter as TRUE？（）A、to enable operating system authentication for a remote clientB、to restrict the scope of administration to identical operating systemsC、to allow the start up and shut down of the database from a remote clientD、to enable the administration of the operating system from a remote clientE、to disable the administration of the operating system from a remote client
Every Sunday the Unix system administrator has a job that executes a full backup of the entire Unix system your database is on. Is this backup usable for backup and recovery of your database？（） A、 Yes， if the database is in ARCHIVELOG modeB、 Yes， if the database is in NOARCHIVELOG modeC、 No， the backup is not usable in any wayD、 Only if the ENABLE_ONLINE_BACKUP parameter is set to TRUE
You are the network administrator for The network consists of a single Active Directory domain named All domain controllers run Windows Server 2003, and all client computers run Windows XP Professional. Each domain server has a locally attached tape device. You need to back up each domain controller. Your backup process must fulfill the following requirements: 1. System recovery must be possible in the event of server failure. 2. The system configuration and all current dynamic disk configurations must be backed up. 3.Other data partitions and all current dynamic disk configurations must be backed up. 4. Other data partitions do not need to be backed up. What should you do?（）A、Use the Backup utility to back up the system files and to create an Automated System Recovery (ASR) disk.B、Use the Backup utility to back up the contents of all mounted drives.C、Use the Backup utility to back up only the System State data.D、Use the Copy command to copy C:/windows and its subfolders to a shared folder on the network.E、Use the Xcopy command to copy C:/windows and its subfolders to a shared folder on the network.
You are the network administrator for The network consists of a single Active Directory domain named All domain controllers run Windows Server 2003, and all client computers run Windows XP Professional. Each domain server has a locally attached tape device. You need to back up each domain controller. Your backup process must fulfil the following requirements: a. System recovery must be possible in the event of server failure. b. The system configuration and all current dynamic disk configurations must be backed up. c. Other data partitions do not need to be backed up. What should you do?（）A、Use the Backup utility to back up the system files and to create an Automated System Recovery (ASR) disk.B、Use the Backup utility to back up the contents of all mounted drives.C、Use the Backup utility to back up only the System State data.D、Use the Copy command to copy C:/windows and its subfolders to a shared folder on the network.E、Use the Xcopy command to copy C:/windows and its subfolders to a shared folder on the network.
You are the network administrator for your company. The network consists of a single Active Directory domain. All domain controllers run Windows Server 2003, and each one has a locally attached tape device. You need to back up each domain controller. Your backup process must fulfill the following requirements: System recovery must be possible in the event of server failure. The system configuration and all current dynamic disk configurations must be backed up. Other data partitions do not need to be backed up. What should you do?（）A、Use the Backup utility to back up the system files and to create an Automated System Recovery (ASR) disk.B、Use the Backup utility to back up the contents of all mounted drives.C、Use the Backup utility to back up only the System State data.D、Use the Copy command to copy C:/windows and its subfolders to a shared folder on the network.E、Use the Xcopy command to copy C:/windows and its subfolders to a shared folder on the network.
单选题An administrator types in the command router ospf 1 and receives the er ror message: "OSPF process 1 cannot start." (Output is omitted.) What should be done to correctly set up OSPF？（）AEnsure that an interface has been configured with an IP addressBEnsure that IP classless is enabledCEnsure that the interfaces can ping their directly connected neighborsDEnsure that an interface has been configured with an IP address and is up
单选题You have been recently hired as a database administrator. Your senior manager asks you to study the production database server and submit a report on the settings done by the previous DBA. While observing the server settings， you find that the following parameter has been set in the parameter file of the database： REMOTE_OS_AUTHENT = TRUE What could have been the reason to set this parameter as TRUE？（）Ato enable operating system authentication for a remote clientBto restrict the scope of administration to identical operating systemsCto allow the start up and shut down of the database from a remote clientDto enable the administration of the operating system from a remote clientEto disable the administration of the operating system from a remote client
单选题Companycom has seven days of vmstat data on four p5 590 production LPARs of four processors each. The data shows that all four LPARs have periodic utilizations of 90-95% lasting several minutes in duration. However, the average utilizations of the four LPARs were between 15-30%. The vmstat data shows that the peak utilizations of each LPAR do not occur at the same time. Which of the following should be set up?（）AA shared pool with four capped LPARsBA shared pool with four uncapped LPARsCFour dedicated LPARs and use DLPAR to manage resources effectivelyDThe server in SMP mode and use WLM to manage resources effectively
单选题You are the network administrator for The network consists of a single Active Directory domain named All domain controllers run Windows Server 2003, and all client computers run Windows XP Professional. Each domain server has a locally attached tape device. You need to back up each domain controller. Your backup process must fulfil the following requirements: a. System recovery must be possible in the event of server failure. b. The system configuration and all current dynamic disk configurations must be backed up. c. Other data partitions do not need to be backed up. What should you do?（）AUse the Backup utility to back up the system files and to create an Automated System Recovery (ASR) disk.BUse the Backup utility to back up the contents of all mounted drives.CUse the Backup utility to back up only the System State data.DUse the Copy command to copy C:/windows and its subfolders to a shared folder on the network.EUse the Xcopy command to copy C:/windows and its subfolders to a shared folder on the network.
单选题An administrator has setup three partitions using shared pool with 2 processing units. They are activated in the following sequence: Partition one: Min. = 1.0, max = 2.0, desired = 1.5 Partition two: Min. = 1.0, max = 2.0, desired = 1.0 Partition three: Min. = 0.1, max = 1.0, desired = 0.8. What is the outcome?（）APartition one starts and has 2.0 processors allocated. Partition two does not start. Partition three does not start. BPartition one starts and has 1.0 processors allocated. Partition two starts and has 1.0 allocated. Partition three does not start. CPartition one starts and has 1.5 processors allocated. Partition two does not start. Partition three starts and has 0.8 processors allocated capacity. DPartition one starts and has 1.5 processors allocated. Partition two does not start. Partition three starts and has an allocated capacity of 0.5 processors.
单选题An administrator has set up three partitions using a shared processor pool with 2 processors and SMT turned on. The partitions are activated in the following sequence: Partition one: Min = 0.5, max = 3.0, desired = 1.0; Partition two: Min = 1.0, max = 3.0, desired = 1.5 Partition three: Min = 1, max = 0.5, desired = 2. What is the outcome?（）APartition one starts and has 3.0 logical processors. Partition two does not start. Partition three has 1.0 logical processors. BPartition one starts and has 1.5 logical processors. Partition two has 1.0 logical processors. Partition three has 0.1 processors. CPartition one starts and has 2.0 logical processors. Partition two start and has 2.0 logical processors. Partition three does not start. DPartition one starts and has 2.0 logical processors. Partition two has 1.0 logical processors. Partition three has 0.1 logical processors.
单选题An administrator notices that every time a particular server is restarted it requires a password in order for the server to begin the start up process. Which of the following is the reason this is happening？（）AThe server needs to have the password service verified and reconfigured.BThe server administrator has set a password policy in Group Policy.CThe server has the BIOS setting configured incorrectly.DThe server is set with a boot password before accessing the OS
单选题Refer to the exhibit. A network administrator configures a new router and enters the copy startup-config running-config on the router. The network administrator powers down the router and sets it up at a remote location. When the router starts, it enter the system configuration dialog as shown. What is the caust of the problem?（）A The network administrator faled to save the configuration.B The configuration register is set to 0x2100.C The boot system flash command is missing from the configuration.D The configuraiton register is set to 0x2102.E The router is configured with the boot system startup command.