单选题R1 is currently advertising prefixes 1.0.0.0/8, 2.0.0.0/8, and 3.0.0.0/8 over its eBGP connection to neighbor 2.2.2.2 (R2). An engineer configures a prefix list (fred) on R1 that permits only 2.0.0.0/8 and then enables the filter with the neighbor R2 prefix- list fred out command. Upon exiting configuration mode, the engineer uses some show commands on R1, but no other commands. Which of the following is true in this case?（）AThe show ip bgp neighbor 2 .2.2.2 received -routes command lists the three original prefixes.BThe show ip bgp neighbor 2.2.2.2 advertised - routes command lists the three original prefixes.CThe show ip bgp neighbor 2.2.2.2 routes command lists the three original prefixes.DT he show ip bgp neighbor 2.2.2.2 routes command lists only 2.0.0.0/8.EThe show ip bgp neighbor 2.2.2.2 advertised - routes command lists only 2.0.0.0/8.
单选题
R1 is currently advertising prefixes 1.0.0.0/8, 2.0.0.0/8, and 3.0.0.0/8 over its eBGP connection to neighbor 2.2.2.2 (R2). An engineer configures a prefix list (fred) on R1 that permits only 2.0.0.0/8 and then enables the filter with the neighbor R2 prefix- list fred out command. Upon exiting configuration mode, the engineer uses some show commands on R1, but no other commands. Which of the following is true in this case?（）
A
The show ip bgp neighbor 2 .2.2.2 received -routes command lists the three original prefixes.
B
The show ip bgp neighbor 2.2.2.2 advertised - routes command lists the three original prefixes.
C
The show ip bgp neighbor 2.2.2.2 routes command lists the three original prefixes.
D
T he show ip bgp neighbor 2.2.2.2 routes command lists only 2.0.0.0/8.
E
The show ip bgp neighbor 2.2.2.2 advertised - routes command lists only 2.0.0.0/8.
参考解析
解析：
暂无解析
相关考题：
Which of the following three BGP filtering methods enabled with the neighbor command will filter BGP prefixes based on the prefix and prefix length?() A. A neighbor distribute - list out command, referencing a standard ACLB. A neighbor prefix - list out commandC. A neighbor filter - list out commandD. A neighbor distribute - list out command, referencing an extended ACLE. A neighbor route - map out command
R1 is currently advertising prefixes 1.0.0.0/8, 2.0.0.0/8, and 3.0.0.0/8 over its eBGP connection to neighbor 2.2.2.2 (R2). An engineer configures a prefix list (fred) on R1 that permits only 2.0.0.0/8 and then enables the filter with the neighbor R2 prefix- list fred out command. Upon exiting configuration mode, the engineer uses some show commands on R1, but no other commands.Which of the following is true in this case?（）A. The show ip bgp neighbor 2 .2.2.2 received -routes command lists the three original prefixes.B. The show ip bgp neighbor 2.2.2.2 advertised - routes command lists the three original prefixes.C. The show ip bgp neighbor 2.2.2.2 routes command lists the three original prefixes.D. T he show ip bgp neighbor 2.2.2.2 routes command lists only 2.0.0.0/8.E. The show ip bgp neighbor 2.2.2.2 advertised - routes command lists only 2.0.0.0/8.
R1 in ASN 1 with loopback1 address 1.1.1.1 needs to be configured with an iBGP connection to R2 with loopback2 IP address 2.2.2.2. The connection should use the loopbacks.Which o f the following commands is required on R1?（）A. neighbor 1.1.1.1 remote- as 1B. neighbor 2.2.2.2 remote- as 2C. neighbor 2.2.2.2 update - source loopback1D. neighbor 2.2.2.2 ibgp -multihop 2E. neighbor 2.2.2.2 ibgp - mode
Enterprise Router R1, in ASN 1, connects to ISP Router I1, ASN 2, using eBGP. There are two parallel serial links between the two rou ters. The implementation plan calls for each router to base their BGP TCP connection on their respective loopback1 interfaces, with IP addresses 1.1.1.1 and 2.2.2.2, respectively.Which of the following commands would not be part of a working eBGP confi guration on Router R1?（）A. router bgp 1B. neighbor 2.2.2.2 remote- as 2C. neighbor 2.2.2.2 update - source loopback1D. neighbor 2.2.2.2 multihop 2
Routers R1 and R2 are OSPF neighbors using their Fa0/0 interfaces, respectively, using default settings for all timers. An engineer ad ds the ip ospf hello - interval 6 command to R1‘s Fa0/0 configuration.Which of the following is true regarding the results from this change?（）A. The show ip ospf neighbor command on R1 lists the revised Hello timerB. The show ip ospf interfac e brief command on R1 lists the revised Hello timerC. The R1 - R2 neighborship fails due to Hello timer mismatcHD. The show ip ospf interface command on R1 lists the revised Hello timer
Router R1 exists in an Enterprise that uses EIGRP as its routing protocol. The show ip route command output on router R1 lists the following phrase: Gateway of last resort is 1.1.1.1 to network 2.0.0.0.Whic h of the following is most likely to have caused this output to occur on R1?（）A. R1 has been configured with an ip default- network 2.0.0.0 command.B. R1 has been configured with an ip route 0.0.0.0 0.0.0.0 1.1.1.1 command.C. R1 has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.D. Another router has been configured with an ip default - network 2.0.0.0 command.E. Another router has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.
Refer to the exhibit. Routers R1 and R2 have established a neighbor relationship and are exchanging routing information. The network design requires that R1 r eceive routing updates from R2, but not advertise any routes to R2. Which configuration command sequence will successfully accomplish this task? （）A. R1(config)# router eigrp 1 R1(config - router)# passive - interface serial 0B. R1(config)# access - list 2 0 deny any R1(config)# router eigrp 1 R1(config - router)# distribute - list 20 out serial 0C. R2(config)# access - list 20 permit any R2(config)# router eigrp 1 R2(config - router)# distribute - list 20 in serial 0D. R1(config)# access - list 20 permit any R 1(config)# router eigrp 1 R1(config - router)# distribute - list 20 in serial 0E. R2(config)# access - list 20 deny any R2(config)# router eigrp 1 R2(config - router)# distribute - list 20 out serial 0F. R2(config)# router eigrp 1 R2(config - router)# passive - interface serial 0
Refer to the e xhibit. It is desired to set up a BGP neighbor relationship between routers R1 and R4. BGP packets between them could travel through R2 or R3. What is the simplest configuration that will allow for failover?（）A. Configure BGP n eighbor relationships between all interfaces on R1 and R4.B. Install a direct connection between R1 and R4.C. Configure loopback interfaces on R1 and R4 to provide the update source address for BGP packets.D. Configure only one neighbor relationship between R1‘s 192.168.1.2 interface and R4‘s 172.16.10.2 interface.
Refer to the exhibit. Network 10.0.0.0／8 is being advertised to autonomous system 65550 via both external links. Which statement about the preferred path to the 10.0.0.0／8 network is true? () A. Router R2 will be preferred because it has the higher neighbor IP address.B. Router R2 will be preferr ed because its neighbor has a lower autonomous system number.C. Router R1 will be preferred because it has a lower local preference.D. Router R2 will be preferred because it has a higher local preference.E. Router R1 will be preferred because its nei ghbor has the higher autonomous system number.F. Router R1 will be preferred because it has the lower neighbor IP address.
Examine the above configuration. What does the route map named test accomplish?() A. permits only the 10.0.0.0/8 prefix to be advertised to the 10.1.1.1 neighborB. marks all prefixes received fro m the 10.1.1.1 neighbor with a MED of 200C. marks the 10.0.0.0/8 prefix advertised to the 10.1.1.1 neighbor with a MED of 200D. permits only the 10.0.0.0/8 prefix to be received from the 10.1.1.1 neighborE. marks all prefixes advertised to the 10.1.1 .1 neighbor with a MED of 200F. marks the 10.0.0.0/8 prefix received from the 10.1.1.1 neighbor with a MED of 200
Routers R1 and R2, currently EIGRP neighbors over their Fa0/0 interfaces (respectively),both use EIGRP authentication. Tuesday at 8 p.m. the neighborship fails.Which of the following wo uld not be useful when investigating whether authenticationhad anything to do with the failure？（）A. debug eigrp packetB. show key chainC. show ip eigrp neighbor failureD. show clock
Two directly connected routers， R1 and R2， are both configured for OSPF graceful restart. R2 is able to switch packets in hardware， but R1 is not. If a network administrator logs on to R2 and performs a system reload， which will be the result？（）A、Traffic forwarded from R2 to or through R1 will continue to be forwarded based on the forwarding table state at the time of the reload.B、R2 will continue to forward traffic to R1， but R1 will drop the traffic because its neighbor adjacency with R2 has failed.C、R2 will continue forwarding traffic to and through R1， but R1 will drop this traffic because it is not capable of maintaining its forwarding state.D、All the traffic R2 is forwarding to or through R1 will be dropped while OSPF rebuilds its neighbor adjacency and forwarding tables.
Which of the following three BGP filtering methods enabled with the neighbor command will filter BGP prefixes based on the prefix and prefix length？（）A、A neighbor distribute - list out command, referencing a standard ACLB、A neighbor prefix - list out commandC、A neighbor filter - list out commandD、A neighbor distribute - list out command, referencing an extended ACLE、A neighbor route - map out command
A company uses Routers R1 and R2 to connect to ISP1 and ISP2, respectively, with Routers I1 and I2 used at the ISPs. R1 peers with I1 and R2; R2 peers with I2 and R1. Assuming as many default s ettings as possible are used on all four routers, which of the following is true about the next - hop IP address for routes R1 learns over its iBGP connection to R2?（）A、The next hop is I2's BGP RIDB、The next hop is I2's IP address used on the R2 - I2 neigh bor relationshipC、The next hop is R2's BGP RIDD、The next hop is R2's IP address used on the R1 - R2 neighbor relationship
R1 in ASN 1 with loopback1 address 1.1.1.1 needs to be configured with an iBGP connection to R2 with loopback2 IP address 2.2.2.2. The connection should use the loopbacks. Which o f the following commands is required on R1?（）A、neighbor 1.1.1.1 remote- as 1B、neighbor 2.2.2.2 remote- as 2C、neighbor 2.2.2.2 update - source loopback1D、neighbor 2.2.2.2 ibgp -multihop 2E、neighbor 2.2.2.2 ibgp - mode
Routers R1 and R2, currently EIGRP neighbors over their Fa0/0 interfaces (respectively),both use EIGRP authentication. Tuesday at 8 p.m. the neighborship fails. Which of the following wo uld not be useful when investigating whether authenticationhad anything to do with the failure？（）A、debug eigrp packetB、show key chainC、show ip eigrp neighbor failureD、show clock
R1 is currently advertising prefixes 1.0.0.0/8, 2.0.0.0/8, and 3.0.0.0/8 over its eBGP connection to neighbor 2.2.2.2 (R2). An engineer configures a prefix list (fred) on R1 that permits only 2.0.0.0/8 and then enables the filter with the neighbor R2 prefix- list fred out command. Upon exiting configuration mode, the engineer uses some show commands on R1, but no other commands. Which of the following is true in this case?（）A、The show ip bgp neighbor 2 .2.2.2 received -routes command lists the three original prefixes.B、The show ip bgp neighbor 2.2.2.2 advertised - routes command lists the three original prefixes.C、The show ip bgp neighbor 2.2.2.2 routes command lists the three original prefixes.D、T he show ip bgp neighbor 2.2.2.2 routes command lists only 2.0.0.0/8.E、The show ip bgp neighbor 2.2.2.2 advertised - routes command lists only 2.0.0.0/8.
单选题Router R1 exists in an Enterprise that uses EIGRP as its routing protocol. The show ip route command output on router R1 lists the following phrase: "Gateway of last resort is 1.1.1.1 to network 2.0.0.0". Whic h of the following is most likely to have caused this output to occur on R1?（）AR1 has been configured with an ip default- network 2.0.0.0 command.BR1 has been configured with an ip route 0.0.0.0 0.0.0.0 1.1.1.1 command.CR1 has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.DAnother router has been configured with an ip default - network 2.0.0.0 command.EAnother router has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.
单选题R1 is currently advertising prefixes 1.0.0.0/8, 2.0.0.0/8, and 3.0.0.0/8 over its eBGP connection to neighbor 2.2.2.2 (R2). An engineer configures a prefix list (fred) on R1 that permits only 2.0.0.0/8 and then enables the filter with the neighbor R2 prefix- list fred out command. Upon exiting configuration mode, the engineer uses some show commands on R1, but no other commands. Which of the following is true in this case?（）AThe show ip bgp neighbor 2 .2.2.2 received -routes command lists the three original prefixes.BThe show ip bgp neighbor 2.2.2.2 advertised - routes command lists the three original prefixes.CThe show ip bgp neighbor 2.2.2.2 routes command lists the three original prefixes.DT he show ip bgp neighbor 2.2.2.2 routes command lists only 2.0.0.0/8.EThe show ip bgp neighbor 2.2.2.2 advertised - routes command lists only 2.0.0.0/8.
单选题R1 in ASN 1 with loopback1 address 1.1.1.1 needs to be configured with an iBGP connection to R2 with loopback2 IP address 2.2.2.2. The connection should use the loopbacks. Which o f the following commands is required on R1?（）Aneighbor 1.1.1.1 remote- as 1Bneighbor 2.2.2.2 remote- as 2Cneighbor 2.2.2.2 update - source loopback1Dneighbor 2.2.2.2 ibgp -multihop 2Eneighbor 2.2.2.2 ibgp - mode
单选题Two directly connected routers， R1 and R2， are both configured for OSPF graceful restart. R2 is able to switch packets in hardware， but R1 is not. If a network administrator logs on to R2 and performs a system reload， which will be the result？（）ATraffic forwarded from R2 to or through R1 will continue to be forwarded based on the forwarding table state at the time of the reload.BR2 will continue to forward traffic to R1， but R1 will drop the traffic because its neighbor adjacency with R2 has failed.CR2 will continue forwarding traffic to and through R1， but R1 will drop this traffic because it is not capable of maintaining its forwarding state.DAll the traffic R2 is forwarding to or through R1 will be dropped while OSPF rebuilds its neighbor adjacency and forwarding tables.
单选题A company uses Routers R1 and R2 to connect to ISP1 and ISP2, respectively, with Routers I1 and I2 used at the ISPs. R1 peers with I1 and R2; R2 peers with I2 and R1. Assuming as many default s ettings as possible are used on all four routers, which of the following is true about the next - hop IP address for routes R1 learns over its iBGP connection to R2?（）AThe next hop is I2's BGP RIDBThe next hop is I2's IP address used on the R2 - I2 neigh bor relationshipCThe next hop is R2's BGP RIDDThe next hop is R2's IP address used on the R1 - R2 neighbor relationship
单选题Routers R1 and R2, currently EIGRP neighbors over their Fa0/0 interfaces (respectively),both use EIGRP authentication. Tuesday at 8 p.m. the neighborship fails. Which of the following wo uld not be useful when investigating whether authenticationhad anything to do with the failure？（）Adebug eigrp packetBshow key chainCshow ip eigrp neighbor failureDshow clock
多选题Which of the following three BGP filtering methods enabled with the neighbor command will filter BGP prefixes based on the prefix and prefix length？（）AA neighbor distribute - list out command, referencing a standard ACLBA neighbor prefix - list out commandCA neighbor filter - list out commandDA neighbor distribute - list out command, referencing an extended ACLEA neighbor route - map out command