单选题A server has two PCI-X buses with four Active PCI-X slots. Slots 1 and 2 are on the first PCI-X bus （100MHz） and slots 3 and 4 are on the second PCI-X bus （133MHz）. The customer requires you to install adapter A and adapter B on day one. After the server has been installed and configured， the server must be running 24 by 7 with no downtime. Three months later， adapter C needs to be hot added. All the adapters are 64-bit and capable of speeds up to 133MHz. The customer’s priority is to have no downtime， and performance is secondary. Based on the information provided， into which slots should adapters A and B be installed in and later into which slot would adapter C be hot-added？（）AAdapter A in slot 1， adapter B in slot 4 and hot-add adapter C in slot 3BAdapter A in slot 1， adapter B in slot 3 and hot-add adapter C in slot 2CAdapter A in slot 2， adapter B in slot 4 and hot-add adapter C in slot 3DAdapter A in slot 3， adapter B in slot 1 and hot-add adapter C in slot 4
单选题
A server has two PCI-X buses with four Active PCI-X slots. Slots 1 and 2 are on the first PCI-X bus （100MHz） and slots 3 and 4 are on the second PCI-X bus （133MHz）. The customer requires you to install adapter A and adapter B on day one. After the server has been installed and configured， the server must be running 24 by 7 with no downtime. Three months later， adapter C needs to be hot added. All the adapters are 64-bit and capable of speeds up to 133MHz. The customer’s priority is to have no downtime， and performance is secondary. Based on the information provided， into which slots should adapters A and B be installed in and later into which slot would adapter C be hot-added？（）
A
Adapter A in slot 1， adapter B in slot 4 and hot-add adapter C in slot 3
B
Adapter A in slot 1， adapter B in slot 3 and hot-add adapter C in slot 2
C
Adapter A in slot 2， adapter B in slot 4 and hot-add adapter C in slot 3
D
Adapter A in slot 3， adapter B in slot 1 and hot-add adapter C in slot 4
参考解析
解析：
暂无解析
相关考题：
A server has a single, half height, PCI－X 3.3v slot available. Which of the following cards can fit in this slot? () A. Half Height, Universally Keyed PCI cardB. Full Height, 3.3v PCI-X cardC. Half Height, x16 PCI Express CardD. Half Height, 3.3v PCI cardE. Half Height, Universally Keyed PCI-X cardF. Full Height, Universally Keyed PCI cardG. Half Height, x8 PCI Express Card
Which of the following is the major advantage of PCI－e over PCI－X?() A. Sensitivity to background noiseB. Height of the cardC. Shared bus topologyD. Point-to-point bus topology
A server has a single， half height， PCI-X 3.3v slot available. Which of the following cards can fit in 1 this slot？（）A、 Half Height， Universally Keyed PCI cardB、 Full Height， 3.3v PCI-X cardC、 Half Height， x16 PCI Express CardD、 Half Height， 3.3v PCI cardE、 Half Height， Universally Keyed PCI-X cardF、 Full Height， Universally Keyed PCI cardG、 Half Height， x8 PCI Express Card
When considering migrating a POWER6 server with PCI-X and PCIe adapters to a Power 720, which statement is true?（）A、PCIe adapters are supported only in I/O drawersB、PCI-X adapters are supported in both the CEC and in I/O drawersC、PCI-X adapters are supported in the CEC; PCIe adapters are supported in 12X I/O drawersD、PCIe adapters are supported in the CEC; PCI-X adapters are supported in 12X I/O drawers
A customer uses an IBM xSeries x366 for their network server.They experienced downtime when the NIC failed earlier this year.Their Novell 6.5 server needs to be accessible all the time at the highest speed possible.Slots are available where network adapters can still be added. High availability is the primary requirement， but increased network bandwidth on the server is also required. Which of the following is the most cost-effective solution to satisfy all of the customer’s requirements？（）A、Upgrade the network switches to 10Gb speed.B、Install a dual port gigabit Ethernet adapter and configure adapter load balancing teaming with the onboard adapters.C、Install one extra adapter to team with the internal adapter and configure adapter failover.D、Install two additional NICs and configure adapter load balancing teaming with the onboard adapters.
A customer is ready to place an order for a p5-570 Express. The external storage proposed for this solution is a 1TB FAStT600 storage server. The customer now wishes to attach a SCSI LTO-2 tape drive to the server to enable them to backup their data. Which of the following should the pSeries technical specialist recommend for the tape drive？（）A、Add a PCI-X Dual Channel Ultra320 SCSI Adapter （FC 5712）.B、Add a PCI-X Fibre Channel Adapter （FC 5716）.C、Add the optional External SCSI Port Enablement Cable （FC 4273）.D、Use the integrated external SCSI port on the p5-570 Express server.
A server has a single, half height, PCI-X 3.3v slot available. Which of the following cards can fit in this slot? （）A、Half Height, Universally Keyed PCI cardB、Full Height, 3.3v PCI-X cardC、Half Height, x16 PCI Express CardD、Half Height, 3.3v PCI cardE、Half Height, Universally Keyed PCI-X cardF、Full Height, Universally Keyed PCI cardG、Half Height, x8 PCI Express Card
Which of the following is the major advantage of PCI-e over PCI-X？（）A、 Sensitivity to background noiseB、 Height of the cardC、 Shared bus topologyD、 Point-to-point bus topology
Which one of these statements is true regarding hot pluggable PCIe and PCI-X slots in a Power 550?（）A、Cards can be added and then enabled via Hardware Management Console (HMC) GUI or command line. B、The HMC allows access to the Advanced System Management Interface (ASMI), where the slots can be managed. C、If the empty slot was already allocated to an LPAR, the LPAR can use the card after the cfgmgr script has been run. D、The Hardware Management Console (HMC) GUI can guide a customer through the process of adding a card to an empty slot.
A customer wants to migrate their existing compute-intensive POWER6 570 to a Power 770. Which of their existing I/O adapters can be migrated to Power 770 enclosures?（）A、PCIe adaptersB、PCI-X adaptersC、PCI-X andPCIe adaptersD、PCI, PCI-X andPCIe adapters
Which of the following configuration is valid for expansion drawers on a Power 750 with 2 processor board sinstalled?（）A、3 PCI-e I/O drawers and 1 PCI-X I/O drawerB、4 PCI-e I/O drawers and 4 RIO-2 I/O drawersC、2 PCI-e I/O drawers and 4 PCI-x I/O drawersD、4 PCI-e I/O drawers and 2 PCI-X I/O drawers
A FastT Host FC-2 bus adapter， a U320 SCSI adapter， and three 10/100Mb Ethernet adapters have to be installed as optimally as possible. This is going to be a 24X7 system. The addition of extra PCI-cards is a major consideration as well. Based on the following， what is the best configuration？（） （1）Slot 1 66MHz Bus 1 （2）Slot 2 66MHz Bus 1 （3）Slot 3 100MHz Bus 2 （4）Slot 4 100Mhz Bus 2 （5）Slot 5 133Mhz Bus 3 （6）Slot 6 133Mhz Bus 3A、Put the Ethernet adapters in slots 1， 2 and 3. Put the FastT HBA in slot 5. Put the U320 adapter in slot 6.B、Put the Ethernet adapters in slots 1， 4 and 6. Put the FastT HBA in slot 5. Put the U320 adapter in slot 3.C、Put the Ethernet adapters in slots 1， 2 and 4. Put the FastT HBA in slot 3. Put the U320 adapter in slot 5.D、Put the Ethernet adapters in slots 1， 2 and 3. Put the FastT HBA in slot 5. Put the U320 adapter in slot 4
A customer plans to consolidate two 8-core POWER6 systems with a total of 8 PCI-X adapters, 6 PCIe adapters, and a PCI-X I/O drawer into a 16-core Power 750. Which action allows the most efficient use of existing equipment?（）A、Populate the Power 750 first then add a GX+ adapter to support PCI-X andPCIe I/O drawer loops.B、Populate the Power 750 first then add 2 GX+ adapters to support PCI-X andPCIe I/O drawer loops.C、Populate the Power 750 first then add a GX++ adapter to support PCI-X andPCIe I/O drawer loops.D、Populate the Power 750 first then add GX+ and GX++ adapters to support PCI-X andPCIe I/O drawer loops.
A server has two PCI-X buses with four Active PCI-X slots. Slots 1 and 2 are on the first PCI-X bus （100MHz） and slots 3 and 4 are on the second PCI-X bus （133MHz）. The customer requires you to install adapter A and adapter B on day one. After the server has been installed and configured， the server must be running 24 by 7 with no downtime. Three months later， adapter C needs to be hot added. All the adapters are 64-bit and capable of speeds up to 133MHz. The customer’s priority is to have no downtime， and performance is secondary. Based on the information provided， into which slots should adapters A and B be installed in and later into which slot would adapter C be hot-added？（）A、Adapter A in slot 1， adapter B in slot 4 and hot-add adapter C in slot 3B、Adapter A in slot 1， adapter B in slot 3 and hot-add adapter C in slot 2C、Adapter A in slot 2， adapter B in slot 4 and hot-add adapter C in slot 3D、Adapter A in slot 3， adapter B in slot 1 and hot-add adapter C in slot 4
A customer is upgrading from a 16-core POWER6 570 with two enclosures to a 16-core Power 770 with only one enclosure. There are 22 PCI-X adapters and 19 PCIe adapters spread across the current CECs and I/O drawers. How many and what kind of drawers are needed to connect these adapters?（）A、2 PCI-X drawers and 2 PCIe drawersB、3 PCI-X drawers and 4 PCIe drawersC、4 PCI-X drawers and 3 PCIe drawersD、4 PCI-X drawers and 2 PCIe drawers
单选题Which one of these statements is true regarding hot pluggable PCIe and PCI-X slots in a Power 550?（）ACards can be added and then enabled via Hardware Management Console (HMC) GUI or command line. BThe HMC allows access to the Advanced System Management Interface (ASMI), where the slots can be managed. CIf the empty slot was already allocated to an LPAR, the LPAR can use the card after the cfgmgr script has been run. DThe Hardware Management Console (HMC) GUI can guide a customer through the process of adding a card to an empty slot.
单选题A customer is upgrading from a 16-core POWER6 570 with two enclosures to a 16-core Power 770 with only one enclosure. There are 22 PCI-X adapters and 19 PCIe adapters spread across the current CECs and I/O drawers. How many and what kind of drawers are needed to connect these adapters?（）A2 PCI-X drawers and 2 PCIe drawersB3 PCI-X drawers and 4 PCIe drawersC4 PCI-X drawers and 3 PCIe drawersD4 PCI-X drawers and 2 PCIe drawers
单选题Which of the following is the major advantage of PCI-e over PCI-X？（）A Sensitivity to background noiseB Height of the cardC Shared bus topologyD Point-to-point bus topology
单选题Which of the following is the major advantage of PCI-e over PCI-X?（）ASensitivity to background noiseBHeight of the cardCShared bus topologyDPoint-to-point bus topology
单选题A customer plans to consolidate two 8-core POWER6 systems with a total of 8 PCI-X adapters, 6 PCIe adapters, and a PCI-X I/O drawer into a 16-core Power 750. Which action allows the most efficient use of existing equipment?（）APopulate the Power 750 first then add a GX+ adapter to support PCI-X and PCIe I/O drawer loops.BPopulate the Power 750 first then add 2 GX+ adapters to support PCI-X and PCIe I/O drawer loops.CPopulate the Power 750 first then add a GX++ adapter to support PCI-X and PCIe I/O drawer loops.DPopulate the Power 750 first then add GX+ and GX++ adapters to support PCI-X and PCIe I/O drawer loops.
单选题A customer is ready to place an order for a p5-570 Express. The external storage proposed for this solution is a 1TB FAStT600 storage server. The customer now wishes to attach a SCSI LTO-2 tape drive to the server to enable them to backup their data. Which of the following should the pSeries technical specialist recommend for the tape drive？（）AAdd a PCI-X Dual Channel Ultra320 SCSI Adapter （FC 5712）.BAdd a PCI-X Fibre Channel Adapter （FC 5716）.CAdd the optional External SCSI Port Enablement Cable （FC 4273）.DUse the integrated external SCSI port on the p5-570 Express server.
单选题Which of the following configuration is valid for expansion drawers on a Power 750 with 2 processor board sinstalled?（）A3 PCI-e I/O drawers and 1 PCI-X I/O drawerB4 PCI-e I/O drawers and 4 RIO-2 I/O drawersC2 PCI-e I/O drawers and 4 PCI-x I/O drawersD4 PCI-e I/O drawers and 2 PCI-X I/O drawers
单选题A FastT Host FC-2 bus adapter， a U320 SCSI adapter， and three 10/100Mb Ethernet adapters have to be installed as optimally as possible. This is going to be a 24X7 system. The addition of extra PCI-cards is a major consideration as well. Based on the following， what is the best configuration？（） （1）Slot 1 66MHz Bus 1 （2）Slot 2 66MHz Bus 1 （3）Slot 3 100MHz Bus 2 （4）Slot 4 100Mhz Bus 2 （5）Slot 5 133Mhz Bus 3 （6）Slot 6 133Mhz Bus 3APut the Ethernet adapters in slots 1， 2 and 3. Put the FastT HBA in slot 5. Put the U320 adapter in slot 6.BPut the Ethernet adapters in slots 1， 4 and 6. Put the FastT HBA in slot 5. Put the U320 adapter in slot 3.CPut the Ethernet adapters in slots 1， 2 and 4. Put the FastT HBA in slot 3. Put the U320 adapter in slot 5.DPut the Ethernet adapters in slots 1， 2 and 3. Put the FastT HBA in slot 5. Put the U320 adapter in slot 4
多选题A server has a single, half height, PCI-X 3.3v slot available. Which of the following cards can fit in this slot? （）AHalf Height, Universally Keyed PCI cardBFull Height, 3.3v PCI-X cardCHalf Height, x16 PCI Express CardDHalf Height, 3.3v PCI cardEHalf Height, Universally Keyed PCI-X cardFFull Height, Universally Keyed PCI cardGHalf Height, x8 PCI Express Card
多选题A server has a single， half height， PCI-X 3.3v slot available. Which of the following cards can fit in 1 this slot？（）AHalf Height， Universally Keyed PCI cardBFull Height， 3.3v PCI-X cardCHalf Height， x16 PCI Express CardDHalf Height， 3.3v PCI cardEHalf Height， Universally Keyed PCI-X cardFFull Height， Universally Keyed PCI cardGHalf Height， x8 PCI Express Card