单选题An administrator installs a new server with five 146GB drives and implements RAID 5 for hardware redundancy.How much disk space will be available for the OS， tools and regular files？（）A146GBB438GBC584GBD730GB
单选题
An administrator installs a new server with five 146GB drives and implements RAID 5 for hardware redundancy.How much disk space will be available for the OS， tools and regular files？（）
A
146GB
B
438GB
C
584GB
D
730GB
参考解析
解析：
暂无解析
相关考题：
An administrator has just upgraded a server from non-hot plug storage to all hot plug storage. The administrator powers up the server, during POST the RAID controller is recognized but none of the drive lights flash.Which of the following should the administrator do FIRST to troubleshoot the problem?（）A. Check the backplane cabling.B. Check the server BIOS.C. Update the RAID controller firmware.D. Install the latest hard drive firmware
You are the administrator of a SQL Server 2000 computer. The server contains a database named Acct. You purge the Acct database of old records and perform. a full backup. The database now uses 4 GB of space. The database files are configured as shown in the Acct Properties exhibit.The server has two hard disks that are configured as shown in the Server Configuration exhibit.The 3 GB transaction log file for the Acct database is stored on drive C. You need to make room for a new database that has a 3 GB data file and a 1 GB transaction log file. You want to optimize database performance on both databases. You also want to minimize administrative overhead.What should you do?A．Shrink the empty data file on drive E. Place the new data file and the new log file on drive E.B．Shrink the empty data file on drive E. Backup and shrink the log file on drive C to 2 GB. Place the new data file on drive E and the new log file on drive C.C．Shrink the data file on drive D to 1 GB, and then shrink the data file on drive E to 2 GB. Place the new data file on drive D and the new log file on drive E.D．Shrink and delete the data file on drive C, and then shrink the database files on drives D and E so that they are both 2 GB. Place the new data file and the new log file on drive C.
An administrator just installed a new RAID controller card into a server. The firmware is current for the controller card. When the server is powered up the administrator notices that the RAID controller card is not recognized during POST. Which of the following is the cause of the problem？（）A、The hard drives were not plugged into the server correctly.B、The controller driver is outdated and needs to be updated from the OEMs website.C、The firmware for the server is too old and does not support the new RAID controller card.D、The cable from the controller to the hard drive backplane is not connected.
An administrator installs new IDE drives into the company server. Upon starting the machine， the BIOS does not recognize any of the drives. Which of the following is the MOST likely cause of the problem？（）A、The jumpers are not set correctly on the drives.B、The power supply is not rated high enough to support the additional drives.C、The BIOS is not compatible with the drives.D、The drives are not powered on.
An administrator has removed a SATA hard drive from a failed server. Which of the following adapters would MOST likely be used by the administrator to transfer files from the drive to a laptop？（）A、SATA to SCSIB、SATA to HBAC、SATA to USBD、SATA to SAS
An administrator attempts to install the latest security patches for an older server. When the administrator runs the patch installer， the install fails. The administrator tries again， and the installer fails again. Which of the following is the MOST likely reason for this？（）A、 The administrator improperly configured the virtual memory settings on the server.B、 The administrator is using incorrect patch switches for the install.C、 The administrator is trying to install security patches for software that is not installed.D、 The administrator is trying to install patches that require hard drive encryption on the server.
An administrator installs a new server with five 146GB drives and implements RAID 5 for hardware redundancy.How much disk space will be available for the OS， tools and regular files？（）A、146GBB、438GBC、584GBD、730GB
An administrator has added a new hard drive to a server that is running out of space on its C Drive and is experiencing slow performance. The administrator needs to free up space on the C Drive.Which of the following is the BEST action for the administrator to take to free up space on the drive？（）A、Move the page file to the new drive.B、Copy the system32 directory to the new drive.C、Convert the C drive to a basic disk.D、Setup a software RAID to mirror the C drive.
The administrator has just installed a new memory module into the server. Now， the server is not showing the new memory. Which of the following should the administrator perform FIRST？（）A、System rebootB、Reseat the memoryC、Install the latest firmwareD、Install the latest driver
An administrator has a rack server that is 5.25 inches （13.3 cm） tall， which of the following is the correct U size for this server？（）A、 OneB、 ThreeC、 FourD、 Five
An administrator will replace five current servers. Which of the following is the MOST important to review before installing new servers?（）A、Verify uninterruptible power supply (UPS) loadB、Verify if server consumes 220VC、Verify CPU loadD、Verify if server consumes 110V
The technician is working on a system and has determined that the hard drive must be reimaged. However, the customer wants to retain all the data. Which of the following would take the LEAST amount of time to implement?（）A、Create a new partition on the hard drive, copy all data to the new partition, reimage the drive, and the old data will be on the new partition and accessible.B、Install a new hard drive, slave the old drive, image the new drive, and show the customer how to access their data on the old drive.C、Upload the data to an external FTP server, reimage the drive, and then restore the data to the newly imaged drive.D、Copy data to a USB connected hard drive, reimage the drive, and then restore the data to the newly imaged drive.
An administrator adds a new SATA hard drive into a functional server and attempts to boot the server. The server will no longer boot into the operating system. The administrator checks all the connections and reboots the server. The server still will not load the operating system. Which of the following is the MOST probable cause？（）A、The BIOS is set with the wrong boot order.B、The jumpers have not been set on the hard drive.C、The hard drive is not compatible with the system board.D、The boot.ini file needs to be modified.
An administrator has been instructed to add four additional drives to a server configured with RAID5. The server is using 146GB drives for the data. Without changing the configuration， how much additional data space would be available if the administrator purchased 300GB drives and added them to the existing array？（）A、438GBB、584GBC、900GBD、1200GB
A server has 500GB of data that must be backed up nightly. The administrator has upgraded the oldLTO2 drive to an LTO3， but the data still will not fit on a single tape. Which of the following additional stepsshould the administrator perform to accommodate the data？（）A、 Enable compression on the new driveB、 Reformat all tapesC、 Delete unnecessary system filesD、 Purchase LTO3 tapes for use in the new driveE、 Purchase new backup software
An administrator has a rack server that is 3.5 inches （8.9 cm） tall. Which of the following is the correct U size for this server？（）A、OneB、TwoC、ThreeD、Five
An administrator reboots a ten drive server， with a RAID 10 array， after a power failure and receives an error logical drive failed. Which of the following is the MOST likely cause？（）A、 Corrupt file system tableB、 Backplane failureC、 Multiple drive failureD、 Bad cable
An administrator is installing Windows Server 2003 via CD on a new server with an SAS RAID array.When the administrator reaches the option to select the target installation drive， there are no drives listed. Which of the following is the FIRST thing the administrator should do？（）A、 Restart the installation via WDS.B、 Shut down the server and check that all RAID drives are connected properly.C、 Restart the installation from CD and press F6 to install RAID drivers.D、 Go into the BIOS and set all RAID drives to compatibility mode.
Companycom has five LPARs, but only one CD drive. How should the CD drive be shared among all the users without system administrator action?（）A、Allocate the CD to the VIO Server and NFS export the CD to the user LPARsB、Allocate the CD to one of the user LPARs and config the VIO Server to NFS import itC、Allocate the CD to the VIO Server and the LPARs will share it as a Virtual SCSI deviceD、Allocate the CD to one of the user LPARs and NFS export it to the remaining user LPARs
单选题An administrator has a rack server that is 5.25 inches （13.3 cm） tall， which of the following is the correct U size for this server？（）A OneB ThreeC FourD Five
单选题An administrator adds a new SATA hard drive into a functional server and attempts to boot the server. The server will no longer boot into the operating system. The administrator checks all the connections and reboots the server. The server still will not load the operating system. Which of the following is the MOST probable cause？（）AThe BIOS is set with the wrong boot order.BThe jumpers have not been set on the hard drive.CThe hard drive is not compatible with the system board.DThe boot.ini file needs to be modified.
单选题After installing a new hard drive into a server for the purpose of mirroring the data from the first drive to the second one， the server displays an “operating system not found” error. Which of the following should the technician do to boot the server from the original drive？（）AReplace the second drive with a hot swappable one.BSwap the drive boot order in the BIOSCMake the second disk active under the disk management tool.DRebuild the array using the hardware RAID tool at boot.
单选题An administrator has just upgraded a server from non-hot plug storage to all hot plug storage. The administrator powers up the server, during POST the RAID controller is recognized but none of the drive lights flash. Which of the following should the administrator do FIRST to troubleshoot the problem?（）ACheck the backplane cabling.BCheck the server BIOS.CUpdate the RAID controller firmware.DInstall the latest hard drive firmware
单选题An administrator installs new IDE drives into the company server. Upon starting the machine， the BIOS does not recognize any of the drives. Which of the following is the MOST likely cause of the problem？（）AThe jumpers are not set correctly on the drives.BThe power supply is not rated high enough to support the additional drives.CThe BIOS is not compatible with the drives.DThe drives are not powered on.
单选题You have a computer that runs Windows XP Professional. The computer is a member of an Active Directory domain. A server administrator installs and shares a new printer on a server that runs Windows Server 2003. You need to configure the computer to print to the new printer. What should you do?（）AFrom the computer, install a local printer.BFrom the computer, install a network printer. CFrom the Active Directory domain, add the computer account for the Windows XP Professional computer to the Print Operators group. DFrom the Windows Server 2003 server, add the computer account for the Windows XP Professional computer to the Print Operators group.
单选题An administrator will replace five current servers. Which of the following is the MOST important to review before installing new servers？（）A Verify uninterruptible power supply （UPS） loadB Verify if server consumes 220VC Verify CPU loadD Verify if server consumes 110V
单选题An administrator is installing Windows Server 2003 via CD on a new server with an SAS RAID array.When the administrator reaches the option to select the target installation drive， there are no drives listed. Which of the following is the FIRST thing the administrator should do？（）A Restart the installation via WDS.B Shut down the server and check that all RAID drives are connected properly.C Restart the installation from CD and press F6 to install RAID drivers.D Go into the BIOS and set all RAID drives to compatibility mode.
单选题An administrator just installed a new RAID controller card into a server. The firmware is current for the controller card. When the server is powered up the administrator notices that the RAID controller card is not recognized during POST. Which of the following is the cause of the problem？（）AThe hard drives were not plugged into the server correctly.BThe controller driver is outdated and needs to be updated from the OEMs website.CThe firmware for the server is too old and does not support the new RAID controller card.DThe cable from the controller to the hard drive backplane is not connected.