单选题Which of the following could the system administrator use to assist in debugging boot problems after the system is up？（）ASMSBalogCfsckDbosboot
单选题
Which of the following could the system administrator use to assist in debugging boot problems after the system is up？（）
A
SMS
B
alog
C
fsck
D
bosboot
参考解析
解析：
暂无解析
相关考题：
After mirroring rootvg, a system administrator wants to validate that the system will boot correctly.Which of the following tasks must be performed before changing the boot order?() A.Run a bosboot -a commandB.Mirror the hd5 on the two disksC.Set up another service mode bootlistD.Check the disks using a lsvg -p rootvg command
Whichofthefollowingcouldthesystemadministratorusetoassistindebuggingbootproblemsafterthesystemisup?() A.SMSB.alogC.fsckD.bosboot
An administrator recently installed a known good RAID adapter. During boot up， the administrator is able to access the RAID configuration utility； however， when the administrator checks for the card in the operating system， it does not show up. Which of the following should the administrator do FIRST？（）A、Move the RAID adapter to another slot.B、Perform a baseline of the system.C、Contact the reseller of the adapter for a replacement card.D、Check the RAID adapter’s manufacturer for the latest drivers.
Which of the following could the system administrator use to assist in debugging boot problems after the system is up？（）A、SMSB、alogC、fsckD、bosboot
A patch has been applied to the operating system. After rebooting, the system is hung. Which of the following commands should have been performed to prevent the system from hanging?（）A、 lppchk, bosboot B、 lslpp -l, oslevel C、 installp -C, lppchk D、 bosboot, synclvodm
After mirroring rootvg, a system administrator wants to validate that the system will boot correctly. Which of the following tasks must be performed before changing the boot order?（）A、Run a bosboot -a commandB、Mirror the hd5 on the two disksC、Set up another service mode bootlistD、Check the disks using a lsvg -p rootvg command
A system administrator decides to review the system error log after installing new hardware. Which of the following is the correct command to use？（）A、errptB、syslogC、prtdiagD、errlogger
A system administrator received the following message while trying to ssh to a server： connection timed out.The administrator pinged the server and had no response. The administrator then pinged the gateway， and was successful. Which tool could the administrator use next to isolate the problem？（）A、routeB、tracerouteC、netstat -nrD、broadcast ping
A system administrator has added a new graphics card to the system and rebooted. The system pauses with C31 in the three-digit displays. Which of the following causes could be the reason for the hang?（）A、All filesets for CDE have not been loaded. Boot into maintenance mode and load them through SMIT.B、There is a missing device driver, incorrect console configuration, or a serial device plugged into native S1 port.C、The new graphics adapter card is marked defined, not available. Rum smit cfgmgr (Install/Configure Devices Added After IPL with the INPUT device /directory for software set to none). This will reconfigure all devices by walking the bus.D、The LED C31 means that there is a corrupted /dev/hd5. Boot into maintenance mode, fsck /dev/hd5 and then issue the bosboot command.
A system administrator was able to boot a system from the AIX installation CDROM. The migration install was selected, but the process hung at 92% complete. The system administrator then rebooted the system, which subsequently hung at LED 552. Which of the following options is the most probable cause?（）A、The ODM is corrupted.B、There is a hardware failure.C、The bosboot command failed.D、Not enough space is available in the filesystems.
A system administrator wants to perform some system maintenance. The AIX installation CD is in the CDROM drive， however the system will not boot from the CD. Which command will assist in determining if the CDROM drive is currently a bootable device？（）A、lscfg -l cd0 -vB、bootlist -m service -oC、bosboot -a -d /dev/cd0D、chdev -l cd0 -a boot=yes
A user reports a corrupted boot logical volume. In order to recreate the contents of the boot logical volume which of the following procedures should the user be advised to perform?（）A、Reboot the system in normal mode.B、Use the bosboot command to rebuild the boot image.C、Restore the boot logical volume from a mksysb image.D、Reboot the system into maintenance mode and run fsck on the boot logical volume.
An application is no longer required to start up automatically at system boot. Which of the following supported procedures would the administrator use to accomplish this（）A、Edit the /etc/inittab and comment out the entry that starts the application by placing a at the beginning of the line.B、Use the chitab command.C、Use the rmitab command.D、Edit the /etc/reboot file to remove the entry that starts the application.
During reboot， the system hangs with an LED 0554 message that means， "The boot device could not be opened or a read failed." Which of the following recovery procedures should be taken （）A、Boot in maintenance mode and use fsck to check hd5.B、Boot in maintenance mode， access the rootvg and check the /etc/inittab for corruption.C、Boot in maintenance mode， access the rootvg and rebuild the boot image using the bosboot command.D、Boot in maintenance mode， and reset the root password.
单选题A system administrator ran the iostat command because of system performance problems. The following iostat output is provided： Based on the output， which of the following is insufficient？（）A CPUB MemoryC Paging spaceD Disk capacityX
单选题A blade server has been configured to boot from SAN. After an HBA firmware upgrade the blade was rebooted and cannot find the operating system. Which of the following should the administrator do NEXT to troubleshoot the issue？（）AVerify all HBA settings.BUpgrade the blade firmware.CUpgrade the OS level HBA drivers.DSet the system to boot from the local disk.
单选题An application is no longer required to start up automatically at system boot. Which of the following supported procedures would the administrator use to accomplish this（）AEdit the /etc/inittab and comment out the entry that starts the application by placing a at the beginning of the line.BUse the chitab command.CUse the rmitab command.DEdit the /etc/reboot file to remove the entry that starts the application.
单选题A system administrator was able to boot a system from the AIX installation CDROM. The migration install was selected, but the process hung at 92% complete. The system administrator then rebooted the system, which subsequently hung at LED 552. Which of the following options is the most probable cause?（）AThe ODM is corrupted.BThere is a hardware failure.CThe bosboot command failed.DNot enough space is available in the filesystems.
单选题During reboot， the system hangs with an LED 0554 message that means， "The boot device could not be opened or a read failed." Which of the following recovery procedures should be taken （）ABoot in maintenance mode and use fsck to check hd5.BBoot in maintenance mode， access the rootvg and check the /etc/inittab for corruption.CBoot in maintenance mode， access the rootvg and rebuild the boot image using the bosboot command.DBoot in maintenance mode， and reset the root password.
单选题A system administrator received the following message while trying to ssh to a server： connection timed out.The administrator pinged the server and had no response. The administrator then pinged the gateway， and was successful. Which tool could the administrator use next to isolate the problem？（）ArouteBtracerouteCnetstat -nrDbroadcast ping
单选题After mirroring rootvg， a system administrator wants to validate that the system will boot correctly. Which of the following tasks must be performed before changing the boot order？（）ARun a bosboot -a commandBMirror the hd5 on the two disksCSet up another service mode bootlistDCheck the disks using a lsvg -p rootvg command
单选题Which of the following commands would a system administrator use to automate monitoring and notification of filling filesystems （）AstartcondrespBfilemonClsfsDmount
单选题A system administrator wants to perform some system maintenance. The AIX installation CD is in the CDROM drive， however the system will not boot from the CD. Which command will assist in determining if the CDROM drive is currently a bootable device？（）Alscfg -l cd0 -vBbootlist -m service -oCbosboot -a -d /dev/cd0Dchdev -l cd0 -a boot=yes
单选题A system administrator decides to review the system error log after installing new hardware. Which of the following is the correct command to use？（）AerrptBsyslogCprtdiagDerrlogger
单选题A patch has been applied to the operating system. After rebooting, the system is hung. Which of the following commands should have been performed to prevent the system from hanging?（）A lppchk, bosboot B lslpp -l, oslevel C installp -C, lppchk D bosboot, synclvodm
单选题A user reports a corrupted boot logical volume. In order to recreate the contents of the boot logical volume which of the following procedures should the user be advised to perform?（）AReboot the system in normal mode.BUse the bosboot command to rebuild the boot image.CRestore the boot logical volume from a mksysb image.DReboot the system into maintenance mode and run fsck on the boot logical volume.
单选题An administrator recently installed a known good RAID adapter. During boot up， the administrator is able to access the RAID configuration utility； however， when the administrator checks for the card in the operating system， it does not show up. Which of the following should the administrator do FIRST？（）AMove the RAID adapter to another slot.BPerform a baseline of the system.CContact the reseller of the adapter for a replacement card.DCheck the RAID adapter’s manufacturer for the latest drivers.