A system administrator has added a new graphics card to the system and rebooted. The system pauses with C31 in the three-digit displays. Which of the following causes could be the reason for the hang?（）A、All filesets for CDE have not been loaded. Boot into maintenance mode and load them through SMIT.B、There is a missing device driver, incorrect console configuration, or a serial device plugged into native S1 port.C、The new graphics adapter card is marked defined, not available. Rum smit cfgmgr (Install/Configure Devices Added After IPL with the INPUT device /directory for software set to none). This will reconfigure all devices by walking the bus.D、The LED C31 means that there is a corrupted /dev/hd5. Boot into maintenance mode, fsck /dev/hd5 and then issue the bosboot command.
A system administrator has added a new graphics card to the system and rebooted. The system pauses with C31 in the three-digit displays. Which of the following causes could be the reason for the hang?（）
- A、All filesets for CDE have not been loaded. Boot into maintenance mode and load them through SMIT.
- B、There is a missing device driver, incorrect console configuration, or a serial device plugged into native S1 port.
- C、The new graphics adapter card is marked defined, not available. Rum smit cfgmgr (Install/Configure Devices Added After IPL with the INPUT device /directory for software set to none). This will reconfigure all devices by walking the bus.
- D、The LED C31 means that there is a corrupted /dev/hd5. Boot into maintenance mode, fsck /dev/hd5 and then issue the bosboot command.
相关考题：
An administrator suspects someone is modifying a sensitive file， and wants to log access information for this file. Which of the following AIX component accomplishes this（）A、auditB、syslogC、TCBD、sysck
Which of the following security features are enabled by default after creating an instance？（）A、Password InvalidationB、Login TimeoutC、Cross Site Scripting ProtectionD、Access Logging
An administrator trying to restore a backup from tape encounters read errors. The administrator suspects that it could be an issue with the block device. What is the appropriate method to resolve this issue?（）A、Set the block size to 0.B、Read the tape using the tctl command.C、Use the 'cpio' command to override tape device settings.D、Run the 'dd' command to identify the block size from the tape.
A customer is planning to migrate a financial application to a 12-way p5-570 system with 96GB of memory. The application data is stored on an ESS Model 800 attached to a p670 server with AIX 5.2. They will have a short outage window to perform the data migration. What is the quickest way to move all the data stored on the attached ESS from the p670 to the new p5-570？（）A、Use rsync to synchronize the data across servers.B、Use exportvg and importvg to move the data to the target system.C、Use NFS to copy the data from the source system to the target system.D、Backup the data from the source system and restore to the target system.
Comprehensive Service Level Agreements typically do not address：（）A、 Roles responsibilitiesB、 Headcount budgetsC、 Reporting policiesD、 Penalites
Which of the following options should be used to obtain the latest security patches for AIX？（）A、FixDistB、The Bonus Pack CDC、OPSD、The Security Maintenance CD
A system was running properly until a reboot. Following the reboot， the system LED displayed cycles between 0223 and 0229. Which of the following procedures should be performed next？（）A、Power down then power up the systemB、Boot into diagnostic mode and run fsckC、Boot from installation media and run bosbootD、Boot into maintenance mode and check the bootlist
An administrator is trying to diagnose as to why a new VIO client （vio_client1） cannot see an allocated disk （hdisk4） from a VIO server （VIOS-A）. The client virtual SCSI adapter has a slot ID of 5 and the corresponding VIO server virtual SCSI adapter has a slot ID of 3. The administrator checks the virtual SCSI configuration from the HMC using the following lshwres command. lshwres –r virtualio --rsubtype scsi -m 9117-570*65ABCDE --level lpar -F / lpar_name，slot_num，remote_lpar_name，remote_slot_num，backing_device VIOS A，5，vio_client2，2，hdisk3 VIOS-A，4，vio_client1，4，hdisk4 VIOS-A，3，vio_client1，6，hdisk5 VIOS-A，2，vio_client3，2，hdisk6 vio_client2，2，VIOS-A，5，hdisk0 vio_client1，4，VIOS-A，4，hdisk0 vio_client1，5，VIOS-A，3，null vio_client3，2，VIOS-A，2，hdisk0 From the output above， what is the most likely reason why the client cannot see the mapped storage？（）A、 The hard disk has been inccorectly mapped on the VIO server.B、 The hard disk has been incorrectly addressed on the VIO client.C、 The client SCSI adapter has been mapped to the incorrect server SCSI adapter.D、 The server SCSI adapter has been mapped to the incorrect client server adapter.
Which command will enable RBAC on a server？（） A、setkst -t enable ； rebootB、chrbac -a enable ； rebootC、enable enhanced_RBAC ； rebootD、chdev -l sys0 -a enhanced_RBAC=’true’ ； reboot
A Business Partner is proposing the installation an IBM XIV Storage System at a customer location. What is the best time to discuss floor space requirements for the solution（）A、during the Technical Delivery and AssessmentB、during installation of the equipmentC、prior to delivery of the XIVD、during the solution proposal