Your company has a server named Server1 that runs Windows Server 2008 R2. Server1 runs the DHCP Server server role and the DNS Server server role. You also have a server named ServerCore that runs a Server Core installation of Windows Server 2008 R2. All computers are configured to use only Server1 for DNS resolution. The IP address of Server1 is 192.168.0.1. The network interface on all the computers is named LAN. Server1 is temporarily offline. A new DNS server named Server2 has been configured to use the IP address 192.168.0.254.You need to configure ServerCore to use Server2 as the preferred DNS server and Server1 as the alternate DNS server. What should you do？（）A、Run the netsh interface ipv4 add dnsserver "LAN" static 192.168.0.254 index=1 command.B、Run the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.254 192.168.0.1 both command.C、Run the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.254 primary command and the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.1 both command.D、Run the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.254 primary command and the netsh interface ipv4 add dnsserver "LAN" static 192.168.0.1 index=1 command.
Your company has a server named Server1 that runs Windows Server 2008 R2. Server1 runs the DHCP Server server role and the DNS Server server role. You also have a server named ServerCore that runs a Server Core installation of Windows Server 2008 R2. All computers are configured to use only Server1 for DNS resolution. The IP address of Server1 is 192.168.0.1. The network interface on all the computers is named LAN. Server1 is temporarily offline. A new DNS server named Server2 has been configured to use the IP address 192.168.0.254.You need to configure ServerCore to use Server2 as the preferred DNS server and Server1 as the alternate DNS server. What should you do？（）
- A、Run the netsh interface ipv4 add dnsserver "LAN" static 192.168.0.254 index=1 command.
- B、Run the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.254 192.168.0.1 both command.
- C、Run the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.254 primary command and the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.1 both command.
- D、Run the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.254 primary command and the netsh interface ipv4 add dnsserver "LAN" static 192.168.0.1 index=1 command.
相关考题：
Your company has a server named Server1 that runs Windows Server 2008 R2. The Windows Server Backup feature is installed on Server1.Server1 fails. You install a new server named Server2 that runs Windows Server 2008 R2.You need to restore the company Windows SharePoint Services (WSS) site to Server2.What should you do?（）A. Use Wbadmin to restore the system state from backup.B. Run Wbadmin with the Get Versions option. Install WSS.C. Run Wbadmin with the Start Recovery option. Install WSS.D. Use Wbadmin to restore the application and the sites from backup.
Your company has a domain controller named Server1 that runs Windows Server 2008 R2. Server1 has the DNS Server server role installed.You need to configure the DNS server to resolve IP addresses to host names.Which record should you create？（）A. Pointer (PTR)B. Host Info (HINFO)C. Service Location (SRV)D. Canonical Name (CNAME)
Your network contains two servers named Server1 and Server2. Server1 runs Windows Server 2008 R2. Server2 runs Windows Server 2008. You need to ensure that you can initiate a full server backup of Server2 from Server1.What should you do？（）A. Install Windows Server Backup on Server2.B. Upgrade Server2 to Windows Server 2008 R2.C. Add an exception to Windows Firewall on Server2.D. Add your user account to the Backup Operators group on Server2.
Your company has a domain controller named Server1 that runs Windows Server 2008 R2 and the DNS Server server role. A server named Server2 runs a custom application.You need to configure DNS to include the following parameters for the custom application: Service Priority Weight Protocol Port number Host offering this service Which record should you create？（）A. Host Info (HINFO)B. Service Location (SRV)C. Canonical Name (CNAME)D. Well-Known Service (WKS)
Your company runs Windows Server Update Services (WSUS) on a server named Server1. Server1 runs Windows Server 2008 R2. Server1 is located on the company intranet.You configure the WSUS Web site to use SSL.You need to configure a Group Policy object (GPO) to specify the intranet update locations.Which URLs should you use？（）A、http: //SERVER1B、http: //SERVER1:8080C、https: //SERVER1D、https: //SERVER1:8080
Your company has a server named Server1 that runs a Windows Server 2008 Core Installation， and the DNS server role. Server1 has one network interface named Local Area Connection. The static IP address of the network interface is configured as 10.0.0.1. You need to create a DNS zone named local.contoso. com on server1. Which command should you use？（）A、ipconfig /registerdns：local.contoso.comB、dnscmd Server1 /ZoneAdd local.contoso.com /DSPrimaryC、dnscmd Server1 /ZoneAdd local.contoso.com /Primary /file local.contoso.com.dnsD、netsh interface ipv4 set dnsserver name=local.contoso.com static 10.0.0.1 primary
your company has a server named server1 that runs a windows server 2008 core installation, and the DNS server role. Server1 has one network interface named local area connection. The static IP address of the network interface is configured as 10.0.0.1. you need to create a DNS zone named local.contoso.com on server1. Which command should you use?（）A、Ipconfig /registerdns: local.contoso.comB、dnscmd server1 /zoneadd local.cotoso.com /DSPrimary.C、Dnscmd server1 /zoneadd local.contoso.com /primary /file local.contoso.com.dns.D、Netsh interface ipv4 set dnsserver name=local.contoso.com static 10.0.0.1 primary.
Your company runs Windows Server Update Services (WSUS) on a server named Server1. Server1runs Windows Server 2008 R2. Server1 is located on the company intranet. You configure the WSUS Web site to use SSL. You need to configure a Group Policy object (GPO) to specify the intranet update locations. Which URLs should you use?（）A、http: //SERVER1B、http: //SERVER1:8080C、https: //SERVER1D、https: //SERVER1:8080
Your company has a domain controller named Server1 that runs Windows Server 2008 and the DNS server role. A server named Server2 runs a custom application. You need to configure DNS to include the following parameters for the custom application： Service Priority Weight Protocol Port Number Host offering this service Which record should you create？（）A、 Host Info （HINFO）B、 Service Locator （SRV）C、 Canonical Name （CNAME）D、 Well-Known Service （WKS）
Your company has a server named Server1 that runs Windows Server 2008 R2. Server1 runs the DHCP Server server role and the DNS Server server role. You also have a server named ServerCore that runs a Server Core installation of Windows Server 2008 R2.All computers are configured to use only Server1 for DNS resolution. The IP address of Server1 is 192.168.0.1. The network interface on all the computers is named LAN.Server1 is temporarily offline. A new DNS server named Server2 has been configured to use the IP address 192.168.0.254.You need to configure ServerCore to use Server2 as the preferred DNS server and Server1 as the alternate DNS server.What should you do？（）A、Run the netsh interface ipv4 add dnsserver "LAN" static 192.168.0.254 index=1 command.B、Run the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.254 192.168.0.1 both command.C、Run the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.254 primary command and the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.1 both command.D、Run the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.254 primary command and the netsh interface ipv4 add dnsserver "LAN" static 192.168.0.1 index=1 command.
Your company has a server named Server1 that runs a Server Core installation of Windows Server 2008， and the DNS Server server role. Server1 has one network interface named Local Area Connection. The static IP address of the network interface is configured as 10.0.0.1. You need to create a DNS zone named local.contoso.com on Server1. Which command should you use？（）A、ipconfig /registerdns：local.contoso.comB、dnscmd Server1 /ZoneAdd local.contoso.com /DSPrimaryC、dnscmd Server1 /ZoneAdd local.contoso.com /Primary /file local.contoso.com.dnsD、netsh interface ip v4 set dnsserver name= local.contoso.com static 10.0.0.1 primary
Your network contains a server named Server1 that runs Windows Server 2008 R2. You plan to deploy DirectAccess on Server1.You need to configure Windows Firewall on Server1 to support DirectAccess connections.What should you allow from Windows Firewall on Server1？（）A、ICMPv6 Echo RequestsB、ICMPv6 RedirectC、IGMPD、IPv6-Route
Your company has a domain controller named Server1 that runs Windows Server 2008 R2 and the DNS Server server role. A server named Server2 runs a custom application.You need to configure DNS to include the following parameters for the custom application: ˆService ˆPriority ˆ Weight ˆ Protocol ˆ Port number ˆHost offering this service Which record should you create？（）A、Host Info (HINFO)B、Service Location (SRV)C、Canonical Name (CNAME)D、Well-Known Service (WKS)
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. Server1 runs Windows Server 2012 R2. Server2 runs Windows Server 2008 R2 Service Pack 1 （SP1） and has the DHCP Server server role installed. You need to manage DHCP on Server2 by using the DHCP console on Server1. What should you do first？（）A、From Windows Firewall with Advanced Security on Server2， create an inbound ruleB、From Internet Explorer on Server2， download and install Windows Management Framework 3.0.C、From Server Manager on Server1， install a featureD、From Windows PowerShell on Server2， run Enable PSRemoting
Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the Remote Access Service role service installed. Server1 is configured as a VPN server.You need to ensure that you can configure Server1 as a Network Address Translation (NAT) server.What should you do first on Server1？（）A、Enable IPv4 routing.B、Enable IPv6 routing.C、Add a new routing protocol.D、Add the Routing role service.
Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2008 R2. The functional level of the domain is Windows Server 2008 R2. The functional level of the forest is Windows Server 2008. You have a member server named Server1 that runs Windows Server 2008. You need to ensure that you can add Server1 to contoso.com as a domain controller. What should you run before you promote Server1（）A、dcpromo.exe /CreateDCAccountB、dcpromo.exe /ReplicaOrNewDomain：replicaC、Set-ADDomainMode -Identity contoso.com -DomainMode Windows2008DomainD、Set-ADForestMode -Identity contoso.com -ForestMode Windows2008R2Forest
Your company has a server named Server1 that runs Windows Server 2008 R2. The Windows Server Backup feature is installed on Server1.Server1 fails. You install a new server named Server2 that runs Windows Server 2008 R2.You need to restore the companyˉ Windows SharePoint Services (WSS) site to Server2. What should you do?（）A、Use Wbadmin to restore the system state from backup.B、Run Wbadmin with the Get Versions option. Install WSS.C、Run Wbadmin with the Start Recovery option. Install WSS.D、Use Wbadmin to restore the application and the sites from backup.
Your network contains two servers named Server1 and Server2. Server1 runs Windows Server 2008 R2. Server2 runs Windows Server 2008. You need to ensure that you can initiate a full server backup of Server2 from Server1. What should you do？（）A、Install Windows Server Backup on Server2.B、Upgrade Server2 to Windows Server 2008 R2.C、Add an exception to Windows Firewall on Server2.D、Add your user account to the Backup Operators group on Server2.
Your company has a domain controller named Server1 that runs Windows Server 2008 R2.Server1 has the DNS Server server role installed.You need to configure the DNS server to resolve IP addresses to host names.Which record should you create？（）A、Pointer (PTR)B、Host Info (HINFO)C、Service Location (SRV)D、Canonical Name (CNAME)
Your company has a server named Server1 that runs Windows Server 2008. Server1 runs the DHCP server role and the DNS server role. You also have a server named ServerCore that runs a ServerCore installation of Windows Server 2008. All computers are configured to use only Server1 for DNS resolution. The IP address of Server1 is 192.168.0.1. The network interface on all the computers is named LAN. Server1 is temporarily office. A new DNS server named Server2 has been configured to use the IP address 192.168.0.254. You need to configure ServerCore to use Server2 as the preferred DNS server. What should you do？（）A、 Run the netsh interface ipv4 add dnsserver "LAN" static 192.168.0.254 index=1 commandB、 Run the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.254 192.168.0.1 both commandC、 Run the netsh interfface ipv4 set dnsserver "LAN" static 192.168.0.254 primary command and the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.1 both command.D、 Run the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.254 primary command and the netsh interface ipv4 add dnsserver "LAN" static 192.168.0.1 index=1 command
Your company has a server named Server1 that runs Windows Server 2008 R2. The Windows Server Backup feature is installed on Server1.Server1 fails. You install a new server named Server2 that runs Windows Server 2008 R2.You need to restore the companys Windows SharePoint Services (WSS) site to Server2.What should you do？（）A、Use Wbadmin to restore the system state from backup.B、Run Wbadmin with the Get Versions option. Install WSS.C、Run Wbadmin with the Start Recovery option. Install WSS.D、Use Wbadmin to restore the application and the sites from backup.
Your company has a domain controller named Server1 that runs Windows Server 2008 R2. Server1 has the DNS Server server role installed.You need to configure the DNS server to resolve IP addresses to host names. Which record should you create？（）A、Pointer (PTR)B、Host Info (HINFO)C、Service Location (SRV)D、Canonical Name (CNAME)
单选题You have a server named Server1 that runs a Server Core installation of Windows Server 2012 R2. Server1 is configured to obtain an IPv4 address by using DHCP. You need to configure the IPv4 settings of the network connection on Server1 as follows： （1）IP address： 10.1.1.1 （2）Subnet mask： 255.255.240.0 （3）Default gateway： 10.1.1.254 What should you run？（）ASet-NetlPInterfaceBnetcfg.exeCNew-NetlPAddressDmsconfig.exe
单选题Your company has a domain controller named Server1 that runs Windows Server 2008 and the DNS server role. A server named Server2 runs a custom application. You need to configure DNS to include the following parameters for the custom application： Service Priority Weight Protocol Port Number Host offering this service Which record should you create？（）A Host Info （HINFO）B Service Locator （SRV）C Canonical Name （CNAME）D Well-Known Service （WKS）