Router R1 lists the following output from a show command. Which of the following is true about R1?（）R1 show ip v6 interface f0/0FastEthernet0/0 is up, line protocol is upIPv6 is enabled, link - local address is FE80::213:19FF:FE12:3456No Virtual link - local address(es):Global unicast address(es):2000::4:213:19FF:FE12:3456, subnet is 2000:0:0:4::/64 [EUI]Jo ined group address(es):FF02::1FF02::2FF02::1:FF:12:3456A. R1‘s solicited node multicast address is FF02::1:FF:12:3456.B. R1‘s 2000::4:213:19FF:FE12:3456 address is a global unicast with all 128 bits statically configured.C. Address FF02::2 is R1‘s solicited node multicast.D. R1‘s solicited node multicast, not listed in this output, would be FF02::213:19FF:FE12:3456.
Router R1 lists the following output from a show command. Which of the following is true about R1?（）R1 show ip v6 interface f0/0FastEthernet0/0 is up, line protocol is upIPv6 is enabled, link - local address is FE80::213:19FF:FE12:3456No Virtual link - local address(es):Global unicast address(es):2000::4:213:19FF:FE12:3456, subnet is 2000:0:0:4::/64 [EUI]Jo ined group address(es):FF02::1FF02::2FF02::1:FF:12:3456
A. R1‘s solicited node multicast address is FF02::1:FF:12:3456.
B. R1‘s 2000::4:213:19FF:FE12:3456 address is a global unicast with all 128 bits statically configured.
C. Address FF02::2 is R1‘s solicited node multicast.
D. R1‘s solicited node multicast, not listed in this output, would be FF02::213:19FF:FE12:3456.
相关考题：
The following output on Router R1 lists details of a BGP route for 190.1.0.0/16. Which of the following is true based on this output?（）R1 show ip bgp 19 0.1.0.0/16BGP routing table entry for 190.1.0.0/16, version 121Paths: (1 available, best 1, table Default - IP - Routing - Table)Advertised to update - groups:11 2 3 41.1.1.1 from 2.2.2.2 (3.3.3.3)Origin IGP, metric 0, localpref 100, valid, internal, bestA. R1 has a neighbor 1.1.1.1 command configured.B. R1 has a neighbor 2.2.2.2 command configured.C. The show ip bgp command lists a line for 190.1.0.0/16 with both an and an i on the left.D. R1 is in ASN 1.
The following output occurs on Router R1. Which of the following cannot be determine d from this output?（）R1 show ip route 180.1.1.0 255.255.255.240Routing entry for 180.1.1.0/28Known via bgp 2, distance 20, metric 0Tag 3, type externalLast update from 192.168.1.2 00:10:27 agoRouting Descriptor Blocks:* 192.168.1.2, from 19 2.168.1.2, 00:10:27 agoRoute metric is 0, traffic share count is 1AS Hops 2Route tag 3A. The type of BGP peer (iBGP or eBGP) that advertised this route to R1B. R1‘s ASNC. The next - hop router‘s ASND. The AS_Path length
The following output, taken from a show ip bgp command on Router R1, lists two neighbors. In what BGP neighbor state is neighbor 1.1.1.1?（）Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/DownState/PfxRcd1.1.1.1 4 1 60 61 26 0 0 00:45:0102.2.2.2 4 3 153 159 26 0 0 00:38:131A. IdleB. OpensentC. ActiveD. Established
On Router R1, process EIGRP 1 is redistributing routes from process OSPF 2, calling route - map fred with the redistribute ospf 2 command. R1 has learned intra - area routes for 10.1.1.0/24 and10.1.2.0/24 in part due to the Type 2 LSAs known for each subnet. The route map filters route 10.1.1.0/24 and allows 10.1.2.0/24 througH.Which of the following co mmands on router R1 list subnet 10.1.1.0/24?（）A. show ip routeB. show ip eigrp topologyC. show ip ospf topologyD. show ip eigrp topology 10.1.1.0/24
The following output exists on Router R1, a router internal to area 1. What can you d etermine as true from the output of the show ip ospf database summary command?() A. The LSA was created by an ABR due to an area range command.B. The LSA was created by an ASBR due to a summary - address command.C. If cr eated by an area range command, the best metric for a subordinate subnet on that ABR must have been 11.D. None of the other answers is correct.
Router R1 lists 4 routes for subnet 10.1.1.0/24 in the output of the show ip eigrp topology all - links command. The variance 200 command is configured, but no other related commands are configured. Which of the following rules are true regarding R1‘s decision of what r outes to add to the IP routing table?Note that RD refers to reported distance and FD to feasible distanc E.（）A. Adds all routes for which the metric is = 200 * the best metric among all routesB. Adds all routes because of the ridiculously high variance settingC. Adds all successor and feasible successor routesD. Adds all successor and feasible successor routes for which the metric is=200 * the best metric among all routes
Examine the following excerpt from the show ip ospf database asbr -summary command on router R1 (RID 1.1.1.1). Which answer can be verified as definitely true based on this output?（） LS Type: Summary Links (AS Boundary Router) Link State ID: 9.9.9.9 (AS Boundary Router address) Advertising Router: 3.3.3.3 LS Seq Number: 8000000D Checksum: 0xE43A Length: 28 Network Mask: /0 TOS: 0 Metric: 100A、The output describes the contents of a Type 5 LSAB、3.3.3.3 identifies a ro uter as being the router performing redistributionC、R1's metric for its best route to reach the router with RID 9.9.9.9 is 100D、The router with RID 3.3.3.3's metric for its best route to reach the router with RID 9.9.9.9 is 100
On Router R1, process EIGRP 1 is redistributing routes from process OSPF 2, calling route - map fred with the redistribute ospf 2 command. R1 has learned intra - area routes for 10.1.1.0/24 and 10.1.2.0/24 in part due to the Type 2 LSAs known for each subnet. The route map filters route 10.1.1.0/24 and allows 10.1.2.0/24 througH. Which of the following co mmands on router R1 list subnet 10.1.1.0/24?（）A、show ip routeB、show ip eigrp topologyC、show ip ospf topologyD、show ip eigrp topology 10.1.1.0/24
Which of the following answers can be verified as true based on the following command output from Router R1?（） R1#show ip ospf virtual - links Virtual Link OSPF_VL0 to router 4.4.4.4 is up Run as demand circuit DoNotAge LSA alloweD. Transit area 1, via interface FastEthernet0/1, Cost of using 3A、R1 is configured with an area 0 virtual - link 4.4.4.4 cost 3 command.B、The ping 4.4.4.4 command on R1 must currently be successful.C、R1's Fa0/0 OSPF cost is 3.D、4.4.4.4 is known to R1 based on a Type 1 LSA in area 1.
Router R1 lists the following output from a show command. Which of the following is true about R1?（） R1# show ip v6 interface f0/0 FastEthernet0/0 is up, line protocol is up IPv6 is enabled, link - local address is FE80::213:19FF:FE12:3456 No Virtual link - local address(es): Global unicast address(es): 2000::4:213:19FF:FE12:3456, subnet is 2000:0:0:4::/64 [EUI] Jo ined group address(es): FF02::1 FF02::2 FF02::1:FF:12:3456A、R1's solicited node multicast address is FF02::1:FF:12:3456.B、R1's 2000::4:213:19FF:FE12:3456 address is a global unicast with all 128 bits statically configured.C、Address FF02::2 is R1's solicited node multicast.D、R1's solicited node multicast, not listed in this output, would be FF02::213:19FF:FE12:3456.
Examine the following excerpt from the show ip eigrp topology 10.2.2.0/24 command on router R1.Which answer can be verified as definitely true based on this output?（） External data: Originating router is 10.1.1.1 AS number of route is 1 External protocol is OSPF, external metric is 64 Administrator tag is 0 (0x00000000)A、R1 is the router that redistributed the routeB、R1's metric to reach subnet 10.2.2.0/24 is 64C、The route was redistributed on a router that has a router ospf 1 command configuredD、R1 is redistributing a route to prefix 1 0.2.2.0/24 into OSPF
Router R1 lists 4 routes for subnet 10.1.1.0/24 in the output of the show ip eigrp topology all - links command. The variance 200 command is configured, but no other related commands are configured. Which of the following rules are true regarding R1's decision of what r outes to add to the IP routing table? Note that RD refers to reported distance and FD to feasible distanc E.（）A、Adds all routes for which the metric is = 200 * the best metric among all routesB、Adds all routes because of the ridiculously high variance settingC、Adds all successor and feasible successor routesD、Adds all successor and feasible successor routes for which the metric is=200 * the best metric among all routes
Routers R1 and R2 are EIGRP neighbors using their Fa0/0 interfaces, respectively. An engineer adds the ip hello - interval eigrp 9 6 command to R1's Fa0/0 configuration. Which of the following is true regarding the results from this c hange？（）A、The show ip eigrp neighbors command on R1 lists the revised Hello timerB、The show ip eigrp interfaces command on R1 lists the revised Hello timerC、The R1 - R2 neighborship fails due to Hello timer mismatcHD、The show ip eigrp interfaces detail command on R1 lists the revised Hello timer
The following output on Router R1 lists details of a BGP route for 190.1.0.0/16. Which of the following is true based on this output?（） R1# show ip bgp 190.1.0.0/16 BGP routing table entry for 190.1.0.0/16, version 121 Paths: (1 available, best #1, table Default - IP - Routing - Table) Advertised to update - groups: 1 1 2 3 4 1.1.1.1 from 2.2.2.2 (3.3.3.3) Origin IGP, metric 0, localpref 100, valid, internal, bestA、R1 has a neighbor 1.1.1.1 command configured.B、R1 has a neighbor 2.2.2.2 command configured.C、The show ip bgp command lists a line for 190.1.0.0/16 with both a n and an i on the left.D、R1 is in ASN 1.
The following line of output was gathered on Enterprise Router Ent1 using the command show ip route. Which of the following answers is most likely to be true, based on thi s output？（） B 128.107.0.0 [20/10] via 11.11.11.11, 00:02:18A、This router has set the Weight of this route to 10.B、This router's BGP table lists this route as an iBGP route.C、This router's MED has been set to 10.D、This router's BGP table lists an AS_Path length of 10 for this route.
Rout er R1 directly connects to subnet 10.1.1.0/24 with its Fa0/0 interface. R1 can ping four other working OSPF routers in that subnet. R1 is neither the designated router (DR) nor backup DR (BDR). OSPF is working correctly on all five routers. Which of the following is true on R1?（）A、The show ip ospf neighbors command lists two neighbors off Fa0/0.B、The show ip ospf neighbors command lists four neighbors off Fa0/0.C、The show ip ospf neighbors command lists two neighbors off Fa0/0 in the FULL state.D、The show ip ospf neighbors command lists two neighbors off Fa0/0 in the DISCO state.
Router R1 exists in an Enterprise that uses EIGRP as its routing protocol. The show ip route command output on router R1 lists the following phrase: "Gateway of last resort is 1.1.1.1 to network 2.0.0.0". Whic h of the following is most likely to have caused this output to occur on R1?（）A、R1 has been configured with an ip default- network 2.0.0.0 command.B、R1 has been configured with an ip route 0.0.0.0 0.0.0.0 1.1.1.1 command.C、R1 has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.D、Another router has been configured with an ip default - network 2.0.0.0 command.E、Another router has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.
R1 is currently advertising prefixes 1.0.0.0/8, 2.0.0.0/8, and 3.0.0.0/8 over its eBGP connection to neighbor 2.2.2.2 (R2). An engineer configures a prefix list (fred) on R1 that permits only 2.0.0.0/8 and then enables the filter with the neighbor R2 prefix- list fred out command. Upon exiting configuration mode, the engineer uses some show commands on R1, but no other commands. Which of the following is true in this case?（）A、The show ip bgp neighbor 2 .2.2.2 received -routes command lists the three original prefixes.B、The show ip bgp neighbor 2.2.2.2 advertised - routes command lists the three original prefixes.C、The show ip bgp neighbor 2.2.2.2 routes command lists the three original prefixes.D、T he show ip bgp neighbor 2.2.2.2 routes command lists only 2.0.0.0/8.E、The show ip bgp neighbor 2.2.2.2 advertised - routes command lists only 2.0.0.0/8.
单选题Examine the following excerpt from the show ip ospf database asbr -summary command on router R1 (RID 1.1.1.1). Which answer can be verified as definitely true based on this output?（） LS Type: Summary Links (AS Boundary Router) Link State ID: 9.9.9.9 (AS Boundary Router address) Advertising Router: 3.3.3.3 LS Seq Number: 8000000D Checksum: 0xE43A Length: 28 Network Mask: /0 TOS: 0 Metric: 100AThe output describes the contents of a Type 5 LSAB3.3.3.3 identifies a ro uter as being the router performing redistributionCR1's metric for its best route to reach the router with RID 9.9.9.9 is 100DThe router with RID 3.3.3.3's metric for its best route to reach the router with RID 9.9.9.9 is 100
单选题The following line of output was gathered on Enterprise Router Ent1 using the command show ip route. Which of the following answers is most likely to be true, based on thi s output？（） B 128.107.0.0 [20/10] via 11.11.11.11, 00:02:18AThis router has set the Weight of this route to 10.BThis router's BGP table lists this route as an iBGP route.CThis router's MED has been set to 10.DThis router's BGP table lists an AS_Path length of 10 for this route.
单选题Which of the following answers can be verified as true based on the following command output from Router R1?（） R1#show ip ospf virtual - links Virtual Link OSPF_VL0 to router 4.4.4.4 is up Run as demand circuit DoNotAge LSA alloweD. Transit area 1, via interface FastEthernet0/1, Cost of using 3AR1 is configured with an area 0 virtual - link 4.4.4.4 cost 3 command.BThe ping 4.4.4.4 command on R1 must currently be successful.CR1's Fa0/0 OSPF cost is 3.D4.4.4.4 is known to R1 based on a Type 1 LSA in area 1.
单选题R1 is currently advertising prefixes 1.0.0.0/8, 2.0.0.0/8, and 3.0.0.0/8 over its eBGP connection to neighbor 2.2.2.2 (R2). An engineer configures a prefix list (fred) on R1 that permits only 2.0.0.0/8 and then enables the filter with the neighbor R2 prefix- list fred out command. Upon exiting configuration mode, the engineer uses some show commands on R1, but no other commands. Which of the following is true in this case?（）AThe show ip bgp neighbor 2 .2.2.2 received -routes command lists the three original prefixes.BThe show ip bgp neighbor 2.2.2.2 advertised - routes command lists the three original prefixes.CThe show ip bgp neighbor 2.2.2.2 routes command lists the three original prefixes.DT he show ip bgp neighbor 2.2.2.2 routes command lists only 2.0.0.0/8.EThe show ip bgp neighbor 2.2.2.2 advertised - routes command lists only 2.0.0.0/8.
单选题The following output, taken from a show ip bgp command on Router R1, lists two neighbors. In what BGP neighbor state is neighbor 1.1.1.1?（） Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd 1.1.1.1 4 1 60 61 26 0 0 00:45:01 0 2.2.2.2 4 3 153 159 26 0 0 00:38:13 1AIdleBOpensentCActiveDEstablished
多选题Rout er R1 directly connects to subnet 10.1.1.0/24 with its Fa0/0 interface. R1 can ping four other working OSPF routers in that subnet. R1 is neither the designated router (DR) nor backup DR (BDR). OSPF is working correctly on all five routers. Which of the following is true on R1?（）AThe show ip ospf neighbors command lists two neighbors off Fa0/0.BThe show ip ospf neighbors command lists four neighbors off Fa0/0.CThe show ip ospf neighbors command lists two neighbors off Fa0/0 in the FULL state.DThe show ip ospf neighbors command lists two neighbors off Fa0/0 in the DISCO state.
多选题The following output on Router R1 lists details of a BGP route for 190.1.0.0/16. Which of the following is true based on this output?（） R1# show ip bgp 19 0.1.0.0/16 BGP routing table entry for 190.1.0.0/16, version 121 Paths: (1 available, best #1, table Default - IP - Routing - Table) Advertised to update - groups: 1 1 2 3 4 1.1.1.1 from 2.2.2.2 (3.3.3.3) Origin IGP, metric 0, localpref 100, valid, internal, bestAR1 has a neighbor 1.1.1.1 command configured.BR1 has a neighbor 2.2.2.2 command configured.CThe show ip bgp command lists a line for 190.1.0.0/16 with both an and an i on the left.DR1 is in ASN 1.
单选题Routers R1 and R2 are EIGRP neighbors using their Fa0/0 interfaces, respectively. An engineer adds the ip hello - interval eigrp 9 6 command to R1's Fa0/0 configuration. Which of the following is true regarding the results from this c hange？（）AThe show ip eigrp neighbors command on R1 lists the revised Hello timerBThe show ip eigrp interfaces command on R1 lists the revised Hello timerCThe R1 - R2 neighborship fails due to Hello timer mismatcHDThe show ip eigrp interfaces detail command on R1 lists the revised Hello timer
单选题Router R1 exists in an Enterprise that uses EIGRP as its routing protocol. The show ip route command output on router R1 lists the following phrase: "Gateway of last resort is 1.1.1.1 to network 2.0.0.0". Whic h of the following is most likely to have caused this output to occur on R1?（）AR1 has been configured with an ip default- network 2.0.0.0 command.BR1 has been configured with an ip route 0.0.0.0 0.0.0.0 1.1.1.1 command.CR1 has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.DAnother router has been configured with an ip default - network 2.0.0.0 command.EAnother router has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.