The following configuration command was issued on router TK1:ip route 172.16.3.0 255.255.255.0 192.168.2.1.Which of the following statements are true regarding this command?() A. The command is used to establish a static route.B. The default administrative distance is used.C. The command is used to configure the default route.D. The subnet mask for the source address is 255.255.255.0E. The command is used to establish a stub network
The following configuration command was issued on router TK1:ip route 172.16.3.0 255.255.255.0 192.168.2.1.Which of the following statements are true regarding this command?()
A. The command is used to establish a static route.
B. The default administrative distance is used.
C. The command is used to configure the default route.
D. The subnet mask for the source address is 255.255.255.0
E. The command is used to establish a stub network
相关考题：
Given the following MPLS L2 configuration command:mpls－relay 10.1.1.1 4Which two statements true? ()(Choose two.) A. This command is applied to the core router facing interface.B. This command is applied to the customer facing interface.C. The 4 is locally significant and identifies the layer 2 circuit.D. The 4 must match exactly on the peer router configuration on the remote end.
Router R1 exists in an Enterprise that uses EIGRP as its routing protocol. The show ip route command output on router R1 lists the following phrase: Gateway of last resort is 1.1.1.1 to network 2.0.0.0.Whic h of the following is most likely to have caused this output to occur on R1?（）A. R1 has been configured with an ip default- network 2.0.0.0 command.B. R1 has been configured with an ip route 0.0.0.0 0.0.0.0 1.1.1.1 command.C. R1 has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.D. Another router has been configured with an ip default - network 2.0.0.0 command.E. Another router has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.
Refer to the exhibit. OSPF has been configured on all routers in the network. However, router R1 does not receive a default route to router R2 as in tended. Which configuration change would ensure that R1 would receive a default route from R2? （）A. Add the area 1 stub command on routers R1.B. Add the always keyword to the default - information originate configuration command on router R2.C. Remov e the default information originate configuration command from router R2 and place it on router R1.D. Add the ip route 5.0.0.0 255.255.255.0 0.0.0.0 command to router R2.
The command "ip route 192.168.24.64 255.255.255.192 192.168.8.2 100" was configured on a router named TK1. No routing protocols or other static routes are configured on the Corporate router yet.Based on this information, which statement is true about this command?（）A. This command sets a gateway of last resort for the TK1 router.B. The number 100 indicates the number of hops to the destination network.C. The interface with IP address 192.168.8.2 is on the TK1 router.D. The command creates a static route for all IP traffic with the source address 192.168.24.64.E. Packets destined for host 192.168.24.124 will be sent to 192.168.8.2.F. None of the above
The following configuration command was entered into a router:ip route 172.16.3.0 255.255.255.0 192.168.2.4 Which of the following statements are true regarding this configuration change?() A. The default administrative distance is used.B. The command is used to establish a static route.C. The command is used to configure the router interfaces.D. The command is used to establish a stub network.E. The subnet mask for the source address is 255.255.255.0
The network administrator of the Oregon router adds the follwing command to the router configuration: ip route 192.168.12.0 255.255.255.0 172.16.12.1. What are the results of adding this command?() A. The command establishes a static routeB. The command invokes a dynamic routing protocol for 192.168.12.0C. Traffic for network 192.168.12.0 is forwarded to 172.16.12.1D. Traffic for all networks is forwarded to 172.16.12.1E. This route is automatically propagated throughout the entire networkF. Traffic for network 172.16.12.0 is forwarded to the 192.168.12.0 network
The network administrator of the Oregon router adds the following command to the router configuration: ip route 192.168.12.0 255.255.255.0 172.16.12.1. What are the results of adding this command (Choose two.)（）。A.The command establishes a static route.B.The command invokes a dynamic routing protocol for 192.168.12.0.C.Traffic for network 192.168.12.0 is forwarded to 172.16.12.1.D.Traffic for all networks is forwarded to 172.16.12.1.E.This route is automatically propagated throughout the entire network.F.Trafficfor network 172.16.12.0 is forwarded to the 192.168.12.0 network.
Which two statements are true about the command ip route 172.16.3.0 255.255.255.0 192.168.2.4?() A.It establishes a static route to the 172.16.3.0 network.B.It establishes a static route to the 192.168.2.0 network.C.It configures the router to send any traffic for an unknown destination to the 172.16.3.0 network.D.It configures the router to send any traffic for an unknown destination out the interface with the address 192.168.2.4.E.It uses the default administrative distance.F.It is a route that would be used last if other routes to the same destination exist.
The command frame－relay map ip 10.121.16.8 102 broadcast was entered on the router. Which of the following statements is true concerning this command()。 A.This command should be executed from the global configuration modeB.The IP address 10.121.16.8 is the local router port used to forward dataC.102 is the remote DLCI that will receive the informationD.This command is required for all Frame Relay configurationsE.The broadcast option allows packets, such as RIP updates, to be forwarded across the PVC
Which two statements are true about the command ip route 172.16.3.0 255.255.255.0 192.168.2.4 (Choose two.)（）。A、It establishes a static route to the 172.16.3.0 networkB、It establishes a static route to the 192.168.2.0 networkC、It configures the router to send any traffic for an unknown destination to the 172.16.3.0 networkD、It configures the router to send any traffic for an unknown destination out the interface with the address 192.168.2.4E、It uses the default administrative distanceF、It is a route that would be used last if other routes to the same destination exist
The following configuration command was issued on router TK1:ip route 172.16.3.0 255.255.255.0 192.168.2.1.Which of the following statements are true regarding this command?（）A、The command is used to establish a static route.B、The default administrative distance is used.C、The command is used to configure the default route.D、The subnet mask for the source address is 255.255.255.0E、The command is used to establish a stub network
Which two statements are true about the command ip route 172.16.3.0 255.255.255.0 192.168.2.4? (Choose two.)（）A、It establishes a static route to the 172.16.3.0 network.B、It establishes a static route to the 192.168.2.0 network.C、It configures the router to send any traffic for an unknown destination to the 172.16.3.0 network.D、It configures the router to send any traffic for an unknown destination out the interface with the address 192.168.2.4.E、It uses the default administrative distance.F、It is a route that would be used last if other routes to the same destination exist.
The command frame-relay map ip 10.121.16.8 102 broadcast was entered on the router. Which of the following statements is true concerning this command？（）A、This command should be executed from the global configuration mode.B、The IP address 10.121.16.8 is the local router port used to forward data.C、102 is the remote DLCI that will receive the information.D、This command is required for all Frame Relay configurations.E、The broadcast option allows packets， such as RIP updates， to be forwarded across the PVC
Which of the following statements are true concerning the command ip sla monitor responder typetcpconnect ipaddress 10.1.1.1 port 23？（Choose all that apply.）（）A、The command will initiate a probe with a destination IP address of 10.1.1.1B、The command is used on the IP SLA responder and the IP SLA sourceC、The command will allow only source address 10.1.1.1 to source probesD、The command will initiate a probe with a destination Telnet portE、The command is used to make the router a responderF、The command will initiate a probe with a source port of 23
The command "ip route 192.168.24.64 255.255.255.192 192.168.8.2 100" was configured on a router named TK1. No routing protocols or other static routes are configured on the Corporate router yet.Based on this information, which statement is true about this command?（）A、This command sets a gateway of last resort for the TK1 router.B、The number 100 indicates the number of hops to the destination network.C、The interface with IP address 192.168.8.2 is on the TK1 router.D、The command creates a static route for all IP traffic with the source address 192.168.24.64.E、Packets destined for host 192.168.24.124 will be sent to 192.168.8.2.F、None of the above
The following configuration command was entered into a router:ip route 172.16.3.0 255.255.255.0 192.168.2.4 Which of the following statements are true regarding this configuration change?（）A、The default administrative distance is used.B、The command is used to establish a static route.C、The command is used to configure the router interfaces.D、The command is used to establish a stub network.E、The subnet mask for the source address is 255.255.255.0
Router R1 exists in an Enterprise that uses EIGRP as its routing protocol. The show ip route command output on router R1 lists the following phrase: "Gateway of last resort is 1.1.1.1 to network 2.0.0.0". Whic h of the following is most likely to have caused this output to occur on R1?（）A、R1 has been configured with an ip default- network 2.0.0.0 command.B、R1 has been configured with an ip route 0.0.0.0 0.0.0.0 1.1.1.1 command.C、R1 has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.D、Another router has been configured with an ip default - network 2.0.0.0 command.E、Another router has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.
The command frame-relay map ip 10.121.16.8 102 broadcast was entered on the router. Which of the following statements is true concerning this command（）。A、This command should be executed from the global configuration modeB、The IP address 10.121.16.8 is the local router port used to forward dataC、102 is the remote DLCI that will receive the informationD、This command is required for all Frame Relay configurationsE、The broadcast option allows packets, such as RIP updates, to be forwarded across the PVC
Given the following MPLS L2 configuration command: mpls-relay 10.1.1.1 4 Which two statements true? （）(Choose two.)A、This command is applied to the core router facing interface.B、This command is applied to the customer facing interface.C、The 4 is locally significant and identifies the layer 2 circuit.D、The 4 must match exactly on the peer router configuration on the remote end.
多选题Which two statements are true about the command ip route 172.16.3.0 255.255.255.0 192.168.2.4 (Choose two.)（）。AIt establishes a static route to the 172.16.3.0 networkBIt establishes a static route to the 192.168.2.0 networkCIt configures the router to send any traffic for an unknown destination to the 172.16.3.0 networkDIt configures the router to send any traffic for an unknown destination out the interface with the address 192.168.2.4EIt uses the default administrative distanceFIt is a route that would be used last if other routes to the same destination exist
单选题The command "ip route 192.168.24.64 255.255.255.192 192.168.8.2 100" was configured on a router named TK1. No routing protocols or other static routes are configured on the Corporate router yet.Based on this information, which statement is true about this command?（）AThis command sets a gateway of last resort for the TK1 router.BThe number 100 indicates the number of hops to the destination network.CThe interface with IP address 192.168.8.2 is on the TK1 router.DThe command creates a static route for all IP traffic with the source address 192.168.24.64.EPackets destined for host 192.168.24.124 will be sent to 192.168.8.2.FNone of the above
多选题The following configuration command was issued on router TK1:ip route 172.16.3.0 255.255.255.0 192.168.2.1.Which of the following statements are true regarding this command?（）AThe command is used to establish a static route.BThe default administrative distance is used.CThe command is used to configure the default route.DThe subnet mask for the source address is 255.255.255.0EThe command is used to establish a stub network
多选题Given the following MPLS L2 configuration command: mpls-relay 10.1.1.1 4 Which two statements true? （）(Choose two.)AThis command is applied to the core router facing interface.BThis command is applied to the customer facing interface.CThe 4 is locally significant and identifies the layer 2 circuit.DThe 4 must match exactly on the peer router configuration on the remote end.
单选题The command frame-relay map ip 10.121.16.8 102 broadcast was entered on the router. Which of the following statements is true concerning this command？（）AThis command should be executed from the global configuration mode.BThe IP address 10.121.16.8 is the local router port used to forward data.C102 is the remote DLCI that will receive the information.DThis command is required for all Frame Relay configurations.EThe broadcast option allows packets， such as RIP updates， to be forwarded across the PVC
多选题Which of the following statements are true concerning the command ip sla monitor responder typetcpconnect ipaddress 10.1.1.1 port 23？（Choose all that apply.）（）AThe command will initiate a probe with a destination IP address of 10.1.1.1BThe command is used on the IP SLA responder and the IP SLA sourceCThe command will allow only source address 10.1.1.1 to source probesDThe command will initiate a probe with a destination Telnet portEThe command is used to make the router a responderFThe command will initiate a probe with a source port of 23
多选题Which two statements are true about the command ip route 172.16.3.0 255.255.255.0 192.168.2.4? (Choose two.)（）AIt establishes a static route to the 172.16.3.0 network.BIt establishes a static route to the 192.168.2.0 network.CIt configures the router to send any traffic for an unknown destination to the 172.16.3.0 network.DIt configures the router to send any traffic for an unknown destination out the interface with the address 192.168.2.4.EIt uses the default administrative distance.FIt is a route that would be used last if other routes to the same destination exist.
多选题The following configuration command was entered into a router:ip route 172.16.3.0 255.255.255.0 192.168.2.4 Which of the following statements are true regarding this configuration change?（）AThe default administrative distance is used.BThe command is used to establish a static route.CThe command is used to configure the router interfaces.DThe command is used to establish a stub network.EThe subnet mask for the source address is 255.255.255.0