the network administrator has been asked to give reasons for moving from ipv4 to ipv6. what are two valid reasons for adopting ipv6 over ipv4?() A. telnet access does not require a passwordB. natC. no broadcastD. chanage of destination address in the ipv6 headerE. chanage of source address in the ipv6 headerF. autoconfiguration
the network administrator has been asked to give reasons for moving from ipv4 to ipv6. what are two valid reasons for adopting ipv6 over ipv4?()
A. telnet access does not require a password
B. nat
C. no broadcast
D. chanage of destination address in the ipv6 header
E. chanage of source address in the ipv6 header
F. autoconfiguration
相关考题：
Ipv6 is(71)for "Internet Protocol Version 6"。Ipv6 is the "next generation" protocol design by the IETF to(72)the current version Inernet Protocol, IP Version 4. Most of today's internet uses Ipv4, which is now nearly twenty years old. Ipv4 has been remarkably resilient in spite of its age, but it is beginging to have problems. Most importantly, there is a growing(73)of Ipv4 addresses, which are needed by all new machines added to the Internet. Ipv6 fixs a number of problems in Ipv4, shch as the(74)number of available Ipv4 addresses. It also adds many improvements to Ipv4 in areas such as souting and network autoconfiguration. Ipv6 is expected to gradually replace Ipv4, with the two coexing for a number of years during a transition(75)A.A．shortB．abbreviateC．abbreviationD．initial
Which two statements are true about using IPv4 and IPv6 simultaneously on a network segment? () A. IPv6 allows a host to create its own IPv6 address that will allow it to communicate to other devices on a network configured via DHCP. IPv4 does not provide a similar capability for hosts.B. IPv6 provides for more host IP addresses but IPv4 provides for more network addresses.C. Hosts can be configured to receive both IPv4 and IPv6 addresses via DHCP.D. Host configuration options for IPv4 can be either statically assigned or assigned via DHCP.Host configuration options for IPv6 can be statically assigned only.E. IPv4 and IPv6 addresses c an be simultaneously assigned to a host but not to a router interface.
Your company plans on migrating their network from IPv4 to IPv6 in the near future. Which three techniques can be used to transition from IPv4 to IPv6?() A. Dual stackB. NATC. Flow labelD. Mobile IPE. 6to4 tunnelingF. AnycastG. MBGP
What are two reasons a network administrator would use CDP?() A. to verify the type of cable interconnecting two devicesB. to determine the status of network services on a remote deviceC. to obtain VLAN information from directly connected switchesD. to verify Layer 2 connectivity between two devices when Layer 3 failsE. to obtain the IP address of a connected device in order to telnet to the deviceF. to determine the status of the routing protocols between directly connected routers
IPv6 is short for "Internet Protocol Version 6". IPv6 is the "next generation" protocol designed by the IETF to(71) the current version Internet Protocol, IP version 4("IPv4").Most of today's internet uses IPv4, which is now more than twenty years old. IPv4 has been(72) resilient in spite of its age, but it is beginning to have problems. Most importantly, there is a growing(73) of IPv4 addresses, which are needed by all new machines added to the Internet. IPv6 fixes a number of problems in IPv4, such as the(74) number of available IPv4 addresses. It also adds many improvements to IPv4 in areas such as routing and network autoconfiguration. IPv6 is expected to gradually replace IPv4, with the two coexisting for a number of years during a transition(75) .A．substitutionB．swapC．switchoverD．replace
The network administrator has been asked to give reasons for moving from ipv4 to ipv6. what are two validreasons for adopting ipv6 over ipv4？（）A、telnet access does not require a passwordB、natC、no broadcastD、chanage of destination address in the ipv6 headerE、chanage of source address in the ipv6 headerF、autoconfiguration
What are two reasons that a network administrator would use access lists (Choose two.)（）。A、to control vty access into a routerB、to control broadcast traffic through a routerC、to filter traffic as it passes through a routerD、to filter traffic that originates from the routerE、to replace passwords as a line of defense against security incursions
Which two statements are true about using IPv4 and IPv6 simultaneously on a network segment? （）A、IPv6 allows a host to create its own IPv6 address that will allow it to communicate to other devices on a network configured via DHCP. IPv4 does not provide a similar capability for hosts.B、IPv6 provides for more host IP addresses but IPv4 provides for more network addresses.C、Hosts can be configured to receive both IPv4 and IPv6 addresses via DHCP.D、Host configuration options for IPv4 can be either statically assigned or assigned via DHCP.Host configuration options for IPv6 can be statically assigned only.E、IPv4 and IPv6 addresses c an be simultaneously assigned to a host but not to a router interface.
the network administrator has been asked to give reasons for moving from ipv4 to ipv6. what are two valid reasons for adopting ipv6 over ipv4?（）A、telnet access does not require a passwordB、natC、no broadcastD、chanage of destination address in the ipv6 headerE、chanage of source address in the ipv6 headerF、autoconfiguration
Your company is researching a new application that runs over IPv6， but part of it must still have IPv4 support. Your company uses a traditional IPv4 network. Your plan is not to run IPv6 over the whole network， but to segment parts of the network or even to operate simultaneously with IPv6 and IPv4. You must make a brief presentation about IPv6 technology to the board of technical directors. Which three of these items could be part of your presentation？ （）A、 Tunnel IPv6 over IPv4 to connect far-end IPv6 networksB、 Explain why configuring IPv4 and IPv6 at the same time over the same LAN interface is not possibleC、 Explain why configuring IPv4 and IPv6 at the same time over the same LAN interface is possibleD、 What is the meaning of EUI-64 and how does it work？E、 Tunnel IPv4 over IPv6 to connect far-end IPv4 networks.
Company network is implemting IPv6 into their existing IPv4 netwrok. Which statement is trueabout incorporating IPv6 into an already existing IPv4 network？（）A、Only OSPF version 3 can be utilized for routing IPv4 and IPv6B、IPv4 and IPv6 networks can be routed simultaneouslyC、IPv6 can be routed using the same routing protocol versions as IPv4D、A router routing for IPv6 and IPv4 must convert IPv4 packets to IPv6 packets to route themE、None of the other alternatives apply
As a frame leaves a Layer 3 device, the Layer 2 encapsulation information is changed from what it was when it entered the devicE.For what two reasons can this happen? （）A、The data is moving from 10BASE-TX to 100BASE-TX.B、The WAN encapsulation type has changed.C、The data format has changed from analog to digital.D、The source and destination hosts are in the same subnet.E、The source and destination MAC addresses have changed.
What are two reasons that a network administrator would use access lists? (Choose two.) （）。A、to control vty access into a router B、to control broadcast traffic through a router C、to filter traffic as it passes through a router D、to filter traffic that originates from the router E、to replace passwords as a line of defense against security incursions
Which two statements about DS-Lite are true？（）A、IPv4 packets are carried over IPv6 tunnels to the LSN while IPv6 traffic is forwarded natively.B、Ipv6 packets are carried over IPv4 tunnels to the LSN while IPv4 traffic is forwards natively.C、The LSN performs NAT44 on private IPv4 source addresses.D、DS-Lite does not perform any address translation.
Your company plans on migrating their network from IPv4 to IPv6 in the near future. Which three techniques can be used to transition from IPv4 to IPv6？（）A、Dual stackB、NATC、Flow labelD、Mobile IPE、6to4 tunnelingF、AnycastG、MBGP
What are two reasons a network administrator would use CDP (Choose two.)（）。A、to verify the type of cable interconnecting two devicesB、to determine the status of network services on a remote deviceC、to obtain VLAN information from directly connected switchesD、to verify Layer 2 connectivity between two devices when Layer 3 failsE、to obtain the IP address of a connected device in order to telnet to the deviceF、to determine the status of the routing protocols between directly connected routers
What are two reasons a network administrator would use CDP?（）A、to verify the type of cable interconnecting two devicesB、to determine the status of network services on a remote deviceC、to obtain VLAN information from directly connected switchesD、to verify Layer 2 connectivity between two devices when Layer 3 failsE、to obtain the IP address of a connected device in order to telnet to the deviceF、to determine the status of the routing protocols between directly connected routers
多选题Your company is researching a new application that runs over IPv6， but part of it must still have IPv4 support. Your company uses a traditional IPv4 network. Your plan is not to run IPv6 over the whole network， but to segment parts of the network or even to operate simultaneously with IPv6 and IPv4. You must make a brief presentation about IPv6 technology to the board of technical directors. Which three of these items could be part of your presentation？ （）ATunnel IPv6 over IPv4 to connect far-end IPv6 networksBExplain why configuring IPv4 and IPv6 at the same time over the same LAN interface is not possibleCExplain why configuring IPv4 and IPv6 at the same time over the same LAN interface is possibleDWhat is the meaning of EUI-64 and how does it work？ETunnel IPv4 over IPv6 to connect far-end IPv4 networks.
多选题What are two valid reasons for using IBM Tivoli Access Manager for Enterprise Single Sign-On Graphical Identification and Authentication （GINA）？（）AABBCCDDEE
多选题Which two statements are true about using IPv4 and IPv6 simultaneously on a network segment? （）AIPv6 allows a host to create its own IPv6 address that will allow it to communicate to other devices on a network configured via DHCP. IPv4 does not provide a similar capability for hosts.BIPv6 provides for more host IP addresses but IPv4 provides for more network addresses.CHosts can be configured to receive both IPv4 and IPv6 addresses via DHCP.DHost configuration options for IPv4 can be either statically assigned or assigned via DHCP.Host configuration options for IPv6 can be statically assigned only.EIPv4 and IPv6 addresses c an be simultaneously assigned to a host but not to a router interface.
多选题What are two reasons a network administrator would use CDP? （）Ato verify the type of cable interconnecting two devicesBto determine the status of network services on a remote deviceCto obtain VLAN information from directly connected switchesDto verify Layer 2 connectivity between two devices when Layer 3 failsEto obtain the IP address of a connected device in order to telnet to the deviceFto determine the status of the routing protocols between directly connected routers
多选题The network administrator has been asked to give reasons for moving from ipv4 to ipv6. what are two validreasons for adopting ipv6 over ipv4？（）Atelnet access does not require a passwordBnatCno broadcastDchanage of destination address in the ipv6 headerEchanage of source address in the ipv6 headerFautoconfiguration
多选题Which two statements about DS-Lite are true？（）AIPv4 packets are carried over IPv6 tunnels to the LSN while IPv6 traffic is forwarded natively.BIpv6 packets are carried over IPv4 tunnels to the LSN while IPv4 traffic is forwards natively.CThe LSN performs NAT44 on private IPv4 source addresses.DDS-Lite does not perform any address translation.
多选题Your company is researching a new application that runs over IPv6， but part of it must still have IPv4 support. Your company uses a traditional IPv4 network. Your plan is not to run IPv6 over the whole network， but to segment parts of the network or even to operate simultaneously with IPv6 and IPv4. You must make a brief presentation about IPv6 technology to the board of technical directors. Which three of these items could be part of your presentation？（）ATunnel IPv6 over IPv4 to connect far-end IPv6 networks.BExplain why configuring IPv4 and IPv6 at the same time over the same LAN interface is not possible.CExplain why configuring IPv4 and IPv6 at the same time over the same LAN interface is possible.DWhat is the meaning of EUI-64 and how does it work？ETunnel IPv4 over IPv6 to connect far-end IPv4 networks.
多选题As a frame leaves a Layer 3 device, the Layer 2 encapsulation information is changed from what it was when it entered the device. For what two reasons can this happen?（）AThe data is moving from 10BASE-TX to 100BASE-TX.BThe WAN encapsulation type has changed.CThe data format has changed from analog to digital.DThe source and destination hosts are in the same subnet.EThe source and destination MAC addresses have changed.
多选题What are two reasons a network administrator would use CDP (Choose two.)（）。Ato verify the type of cable interconnecting two devicesBto determine the status of network services on a remote deviceCto obtain VLAN information from directly connected switchesDto verify Layer 2 connectivity between two devices when Layer 3 failsEto obtain the IP address of a connected device in order to telnet to the deviceFto determine the status of the routing protocols between directly connected routers
多选题Your company plans on migrating their network from IPv4 to IPv6 in the near future. Which three techniques can be used to transition from IPv4 to IPv6？（）ADual stackBNATCFlow labelDMobile IPE6to4 tunnelingFAnycastGMBGP