Which two statements are true about using IPv4 and IPv6 simultaneously on a network segment? （）A、IPv6 allows a host to create its own IPv6 address that will allow it to communicate to other devices on a network configured via DHCP. IPv4 does not provide a similar capability for hosts.B、IPv6 provides for more host IP addresses but IPv4 provides for more network addresses.C、Hosts can be configured to receive both IPv4 and IPv6 addresses via DHCP.D、Host configuration options for IPv4 can be either statically assigned or assigned via DHCP.Host configuration options for IPv6 can be statically assigned only.E、IPv4 and IPv6 addresses c an be simultaneously assigned to a host but not to a router interface.
Which two statements are true about using IPv4 and IPv6 simultaneously on a network segment? （）
- A、IPv6 allows a host to create its own IPv6 address that will allow it to communicate to other devices on a network configured via DHCP. IPv4 does not provide a similar capability for hosts.
- B、IPv6 provides for more host IP addresses but IPv4 provides for more network addresses.
- C、Hosts can be configured to receive both IPv4 and IPv6 addresses via DHCP.
- D、Host configuration options for IPv4 can be either statically assigned or assigned via DHCP.Host configuration options for IPv6 can be statically assigned only.
- E、IPv4 and IPv6 addresses c an be simultaneously assigned to a host but not to a router interface.
相关考题：
During the IPv6 autoconfiguration, what does the device append to the 64－ bit prefix that it receives from the router to create its IPv6 address?() A. a pseudora ndom generated numberB. its locally configured IPv4 addressC. the DHCP - supplied device IDD. its MAC address
Which functionality is required within an IP router that is situated at the boundary of an IPv4 network and an IPv6 network to allow communication between IPv6－ only and IPv4 － only nodes?() A. AutoconfigurationB. Automatic 6to4 TunnelC. Automatic 6to4 RelayD. Network Address Translator - Protocol Translator (NAT - PT)E. Intrasite Automatic T unnel Address Protocol (ISATAP)
In IPv6 network, an IPv6 overlay tunnel is required to communicate with isolated IPv6 networks across the existing IPv4 infrastructurE. There are currently fiv e IPv6 overlay tunnel types.Which three IPv6 overlay tunnel statements are true？（）A. Overlay tunnels can only be configured between border routers capable of supporting IPv4 and IPv6.B. An manual overlay tunnel supports point - to - multipo int tunnels capable of carrying IPv6 and Connectionless Network Service (CLNS) packets.C. Overlay tunneling encapsulates IPv6 packets in IPv4 packets for delivery across an IPv4 infrastructure.D. Overlay tunnels can be configured between border route rs or between a border router and a host capable of supporting IPv4 and IPv6.E. Cisco IOS supports manual, generic routing encapsulation (GRE), IPv4 - compatible, 6to4, and Intra - Site Automatic Tunnel Addressing Protocol (ISATAP) overlay tunneling mechan isms.F. Cisco IOS supports manual, generic routing encapsulation (GRE), IPv6 - compatible, 4to6, and Multiprotocol Label Switching (MPLS) overlay tunneling mechanisms.
Which statement describes the difference between a manually configured IPv6 in IPv4 tunnel versus an automatic 6to4 tunnel?() A. An automatic 6to4 tunnel does not req uire dual - stack (IPv4 and IPv6) routers at the tunnel endpoints.B. An automatic 6to4 tunnel allows multiple IPv4 destinations.C. A manually configured IPv6 in IPv4 tunnel allows multiple IPv4 destinations.D. A manually configured IPv6 in IPv4 tunnel does not require dual- stack (IPv4 and IPv6) routers at the tunnel endpoints.
Which two statements are true about using IPv4 and IPv6 simultaneously on a network segment? () A. IPv6 allows a host to create its own IPv6 address that will allow it to communicate to other devices on a network configured via DHCP. IPv4 does not provide a similar capability for hosts.B. IPv6 provides for more host IP addresses but IPv4 provides for more network addresses.C. Hosts can be configured to receive both IPv4 and IPv6 addresses via DHCP.D. Host configuration options for IPv4 can be either statically assigned or assigned via DHCP.Host configuration options for IPv6 can be statically assigned only.E. IPv4 and IPv6 addresses c an be simultaneously assigned to a host but not to a router interface.
Which statement is true concerning 6to4 tunneling?() A. The edge routers can use any locally configured IPv6 address.B. Hosts and routers inside a 6to4 site will need a special code.C. An edge router must use IPv6 address of 2002::/16 in its prefix.D. IPv4 traffic is encapsulated with an IPv6 header.
the network administrator has been asked to give reasons for moving from ipv4 to ipv6. what are two valid reasons for adopting ipv6 over ipv4?() A. telnet access does not require a passwordB. natC. no broadcastD. chanage of destination address in the ipv6 headerE. chanage of source address in the ipv6 headerF. autoconfiguration
During the IPv6 autoconfiguration, what does the device append to the 64- bit prefix that it receives from the router to create its IPv6 address?（）A、a pseudora ndom generated numberB、its locally configured IPv4 addressC、the DHCP - supplied device IDD、its MAC address
A company is using 6to4 tunneling within their IPv6 network. Which two statements about this kindof tunneling are accurate？（）A、6to4 is a manual tunnel methodB、Prepending a reserved IPv6 code to the hexadecimal representation of 192.168.0.1 facilitates6to4 tunnelingC、Each 6to4 site receives a /48 prefix in a 6to4 tunnelD、2002：：/48 is the address range specifically assigned to 6to4E、Prepending 0x2002 with the IPv4 address creates an IPv6 address that is used in 6to4tunneling
Which statement describes the difference between a manually configured IPv6 in IPv4 tunnel versus an automatic 6to4 tunnel?（）A、An automatic 6to4 tunnel does not req uire dual - stack (IPv4 and IPv6) routers at the tunnel endpoints.B、An automatic 6to4 tunnel allows multiple IPv4 destinations.C、A manually configured IPv6 in IPv4 tunnel allows multiple IPv4 destinations.D、A manually configured IPv6 in IPv4 tunnel does not require dual- stack (IPv4 and IPv6) routers at the tunnel endpoints.
A Company is using 6to4 tunnels in their IPv6 network. Which two statements are true about thesetunnels？（）A、In a 6to4 tunnel， the first two bytes of the IPv6 address will be 0x2002 and the next four byteswill be the hexadecimal equivalent of the IPv4 addressB、In a 6to4 tunnel， the IPv4 address 192.168.99.1 would be converted to the2002：1315：4463：1：：/64 IPv6 addressC、In a 6to4 tunnel， the IPv4 address 192.168.99.1 would be converted to the 2002：c0a8：6301：：/48IPv6 addressD、In a 6to4 tunnel， the first two bytes of the IPv6 address will be locally derived and the next twobytes will be the hexadecimal equivalent of the IPv4 addressE、In a 6to4 tunnel， the IPv4 address 192.168.99.1 would be converted to the 2002：c0a8：6301：：/16IPv6 address
Which of the following solutions will encapsulate IPv6 packets with IPv4 headers？（）A、Create an IPv4 tunnel and assign the tunnel IPv6 addressesB、Create IPv4 interfaces on both ends of the network， and use either static routes or a routingprocess to direct IPv6 packets through those interfacesC、IPv6 packets cannot be encapsulated with IPv4 headers because the addresses are notcompatibleD、Create IFV6 interfaces on both ends of the network， and use static routes to point the IPv4address to those interfacesE、Use an IPv6 routing protocol like OSPFv3 and assign IPv4 packets to that processF、Create an IPv4 tunnel and use the tunnel mode ipv6ip command
the network administrator has been asked to give reasons for moving from ipv4 to ipv6. what are two valid reasons for adopting ipv6 over ipv4?（）A、telnet access does not require a passwordB、natC、no broadcastD、chanage of destination address in the ipv6 headerE、chanage of source address in the ipv6 headerF、autoconfiguration
Your company is researching a new application that runs over IPv6， but part of it must still have IPv4 support. Your company uses a traditional IPv4 network. Your plan is not to run IPv6 over the whole network， but to segment parts of the network or even to operate simultaneously with IPv6 and IPv4. You must make a brief presentation about IPv6 technology to the board of technical directors. Which three of these items could be part of your presentation？ （）A、 Tunnel IPv6 over IPv4 to connect far-end IPv6 networksB、 Explain why configuring IPv4 and IPv6 at the same time over the same LAN interface is not possibleC、 Explain why configuring IPv4 and IPv6 at the same time over the same LAN interface is possibleD、 What is the meaning of EUI-64 and how does it work？E、 Tunnel IPv4 over IPv6 to connect far-end IPv4 networks.
Which functionality is required within an IP router that is situated at the boundary of an IPv4 network and an IPv6 network to allow communication between IPv6- only and IPv4 - only nodes?（）A、AutoconfigurationB、Automatic 6to4 TunnelC、Automatic 6to4 RelayD、Network Address Translator - Protocol Translator (NAT - PT)E、Intrasite Automatic T unnel Address Protocol (ISATAP)
You need to decide on the best router redundancy protocol to use in the Company network. Which two statements are true about HSRP， VRRP， and GLBP？（）A、 GLBP and VRRP allow for MD5 authentication， whereas HSRP does not.B、 HSRP allows for multiple upstream active links being simultaneously used， whereas GLBP does not.C、 GLBP allows for router load balancing of traffic from a network segment without the different host IP configurations required to achieve the same results with HSRP.D、 Unlike HSRP and VRRP， GLBP allows automatic selection and simultaneous use of multiple available gateways.E、 GLBP allows for router load balancing of traffic from a network segment by utilizing the creation of multiple standby groups.
Company network is implemting IPv6 into their existing IPv4 netwrok. Which statement is trueabout incorporating IPv6 into an already existing IPv4 network？（）A、Only OSPF version 3 can be utilized for routing IPv4 and IPv6B、IPv4 and IPv6 networks can be routed simultaneouslyC、IPv6 can be routed using the same routing protocol versions as IPv4D、A router routing for IPv6 and IPv4 must convert IPv4 packets to IPv6 packets to route themE、None of the other alternatives apply
Which two statements about DS-Lite are true？（）A、IPv4 packets are carried over IPv6 tunnels to the LSN while IPv6 traffic is forwarded natively.B、Ipv6 packets are carried over IPv4 tunnels to the LSN while IPv4 traffic is forwards natively.C、The LSN performs NAT44 on private IPv4 source addresses.D、DS-Lite does not perform any address translation.
多选题Your company is researching a new application that runs over IPv6， but part of it must still have IPv4 support. Your company uses a traditional IPv4 network. Your plan is not to run IPv6 over the whole network， but to segment parts of the network or even to operate simultaneously with IPv6 and IPv4. You must make a brief presentation about IPv6 technology to the board of technical directors. Which three of these items could be part of your presentation？ （）ATunnel IPv6 over IPv4 to connect far-end IPv6 networksBExplain why configuring IPv4 and IPv6 at the same time over the same LAN interface is not possibleCExplain why configuring IPv4 and IPv6 at the same time over the same LAN interface is possibleDWhat is the meaning of EUI-64 and how does it work？ETunnel IPv4 over IPv6 to connect far-end IPv4 networks.
单选题Company network is implemting IPv6 into their existing IPv4 netwrok. Which statement is trueabout incorporating IPv6 into an already existing IPv4 network？（）AOnly OSPF version 3 can be utilized for routing IPv4 and IPv6BIPv4 and IPv6 networks can be routed simultaneouslyCIPv6 can be routed using the same routing protocol versions as IPv4DA router routing for IPv6 and IPv4 must convert IPv4 packets to IPv6 packets to route themENone of the other alternatives apply
单选题Which functionality is required within an IP router that is situated at the boundary of an IPv4 network and an IPv6 network to allow communication between IPv6- only and IPv4 - only nodes?（）AAutoconfigurationBAutomatic 6to4 TunnelCAutomatic 6to4 RelayDNetwork Address Translator - Protocol Translator (NAT - PT)EIntrasite Automatic T unnel Address Protocol (ISATAP)
单选题Which of the following solutions will encapsulate IPv6 packets with IPv4 headers？（）ACreate an IPv4 tunnel and assign the tunnel IPv6 addressesBCreate IPv4 interfaces on both ends of the network， and use either static routes or a routingprocess to direct IPv6 packets through those interfacesCIPv6 packets cannot be encapsulated with IPv4 headers because the addresses are notcompatibleDCreate IFV6 interfaces on both ends of the network， and use static routes to point the IPv4address to those interfacesEUse an IPv6 routing protocol like OSPFv3 and assign IPv4 packets to that processFCreate an IPv4 tunnel and use the tunnel mode ipv6ip command
多选题Which two statements are true about using IPv4 and IPv6 simultaneously on a network segment? （）AIPv6 allows a host to create its own IPv6 address that will allow it to communicate to other devices on a network configured via DHCP. IPv4 does not provide a similar capability for hosts.BIPv6 provides for more host IP addresses but IPv4 provides for more network addresses.CHosts can be configured to receive both IPv4 and IPv6 addresses via DHCP.DHost configuration options for IPv4 can be either statically assigned or assigned via DHCP.Host configuration options for IPv6 can be statically assigned only.EIPv4 and IPv6 addresses c an be simultaneously assigned to a host but not to a router interface.
多选题The network administrator has been asked to give reasons for moving from ipv4 to ipv6. what are two validreasons for adopting ipv6 over ipv4？（）Atelnet access does not require a passwordBnatCno broadcastDchanage of destination address in the ipv6 headerEchanage of source address in the ipv6 headerFautoconfiguration
单选题During the IPv6 autoconfiguration, what does the device append to the 64- bit prefix that it receives from the router to create its IPv6 address?（）Aa pseudora ndom generated numberBits locally configured IPv4 addressCthe DHCP - supplied device IDDits MAC address
多选题A Company is using 6to4 tunnels in their IPv6 network. Which two statements are true about thesetunnels？（）AIn a 6to4 tunnel， the first two bytes of the IPv6 address will be 0x2002 and the next four byteswill be the hexadecimal equivalent of the IPv4 addressBIn a 6to4 tunnel， the IPv4 address 192.168.99.1 would be converted to the2002：1315：4463：1：：/64 IPv6 addressCIn a 6to4 tunnel， the IPv4 address 192.168.99.1 would be converted to the 2002：c0a8：6301：：/48IPv6 addressDIn a 6to4 tunnel， the first two bytes of the IPv6 address will be locally derived and the next twobytes will be the hexadecimal equivalent of the IPv4 addressEIn a 6to4 tunnel， the IPv4 address 192.168.99.1 would be converted to the 2002：c0a8：6301：：/16IPv6 address
多选题Which two statements about DS-Lite are true？（）AIPv4 packets are carried over IPv6 tunnels to the LSN while IPv6 traffic is forwarded natively.BIpv6 packets are carried over IPv4 tunnels to the LSN while IPv4 traffic is forwards natively.CThe LSN performs NAT44 on private IPv4 source addresses.DDS-Lite does not perform any address translation.