You have a router running BGP for the MPLS network and OSPF for the local LAN network at the sales office. A route is being learned from the MPLS network that also exists on the OSPF local network.It is important that the router chooses the local LAN route being learned from the downstream switch running OSPF rather than the upstream BGP neighbor. Also，if the local OSPF route goes away，the BGP route needs to be used. What should be configured to make sure that the router will choose the LAN network as the preferred path？（）A、static route needs to be addedB、floating static route needs to be addedC、bgp backdoor commandD、ospf backdoor command
You have a router running BGP for the MPLS network and OSPF for the local LAN network at the sales office. A route is being learned from the MPLS network that also exists on the OSPF local network.It is important that the router chooses the local LAN route being learned from the downstream switch running OSPF rather than the upstream BGP neighbor. Also，if the local OSPF route goes away，the BGP route needs to be used. What should be configured to make sure that the router will choose the LAN network as the preferred path？（）
- A、static route needs to be added
- B、floating static route needs to be added
- C、bgp backdoor command
- D、ospf backdoor command
相关考题：
What is true regarding the OSPF Type 2 LSA?() A. The DR floods this to describe the local stub network segment.B. The ABR floods this to describe the local stub network segment.C. The DR floods this to describe the local transit network segment.D. Each OSPF router floods this to describe its interfaces and metrics.E. The DR and BDR flood this to describe the local transit network segment.
What are two examples of RE exception traffic?() A. BGP updates that travel through the local router and are destined for a remote router.B. OSPF hello packets that are sent from a remote router and are destined for the local router.C. Telnet traffic that is sent from a remote host and is destined for the local router.D. Telnet traffic that travels through the local router and is destined for a remote end host.
What does a router do?() A.Routes traffic down alternative paths and connects the local-area network (LAN) to the wide- area network (WAN)B.Reads Media Access Control (MAC) addresses to forward messages to the correct location and connects the local-area network (LAN) to the wide-area network (WAN)C.Stores data on the network and connects the local-area network (LAN) to the wide-area network (WAN)D.Broadcasts data to all devices that are connected to it across the local-area network (LAN) and wide-area network (WAN)
A router has two paths to reach another network in a different autonomous system. Neither route was generated by the local router and both routes have the same default weight an d local preference values.Which statement is true about how BGP would select the best path?（）A. To influence one route to be preferred, its default local preference value will be changed via the use of the command bgp default local - preference 50B. Th e router will prefer the shortest autonomous system pathC. If the command bgp always - compare - med has been given, then the router will prefer the route with the highest MEDD. The router will prefer the route with the lower MED
A new router, named TK1, is being installed. You wish to add this router to your existing OSPF network. In doing so, you configure the following:TK1(config) router ospf 1TK1(config-router) network 10.10.10.0 255.255.255.0 area 0After making this change, you notice that the networks attached to TK1 are not being learned by the other OSPF routers. What could be the cause of this?（）A. The AS is not correctly configuredB. The network subnet mask is incorrectly configuredC. The network wildcard mask is configured incorrectlyD. The network number is not correctly configuredE. The process id is configured incorrectlyF. None of the above
A problem was reported that the 10.10.10.0/24 prefix was not injected into the local BGP table on a PassGuide router named PG1.The following information is available from this router：PG1 Configuration：router bgp 65001network 10.0.0.0neighbor 172.16.1.1 remote-as65002no auto-summaryRouting table information：show ip route|include 10O10.10.10.0/24[110/11]via192.168.1.1，2d00h，Ethernet0/0Why is this prefix not in the local BGP table of thePG1（）A.The 172.16.1.1 neighbor is down.B.The prefix 10.10.10.0/24is not a’connected’route.C.This route is not a BGP learned route.D.The network command is wrong.E.None of the other alternatives apply
A router receives information about network 192.168.10.0／24 from multiple sources.What will the router consider the most reliable information about the path to that network?() A.an OSPF update for network 192.168.0.0/16B.a static router to network 192.168.10.0/24C.a static router to network 192.168.10.0/24 with a local serial interface configured as the next hopD.a RIP update for network 192.168.10.0/24E.a directly connected interface with an address of 192.168.10.254/24F.a default route with a next hop address of 192.168.10.1
A router receives information about network 192.168.10.0／24 from multiple sources. What will the router consider the most reliable information about the path to that network()。 A.a directly connected interface with an address of 192.168.10.254/24B.a static route to network 192.168.10.0/24C.a RIP update for network 192.168.10.0/24D.an OSPF update for network 192.168.0.0/16E.a default route with a next hop address of 192.168.10.1F.a static route to network 192.168.10.0/24 with a local serial interface configured as the next hop
A new router, named TK1, is being installed. You wish to add this router to your existing OSPF network. In doing so, you configure the following: TK1(config)# router ospf 1 TK1(config-router)# network 10.10.10.0 255.255.255.0 area 0 After making this change, you notice that the networks attached to TK1 are not being learned by the other OSPF routers. What could be the cause of this?（）A、The AS is not correctly configuredB、The network subnet mask is incorrectly configuredC、The network wildcard mask is configured incorrectlyD、The network number is not correctly configuredE、The process id is configured incorrectlyF、None of the above
You have a router running BGP for the MPLS network and OSPF for the local LAN network at the sales office. A route is being learned from the MPLS network that also exists on the OSPF local network. It is important that the router chooses the local LAN route being learned from the downstream switch running OSPF rather than the upstream BGP neighbor. Also， if the local OSPF route goes away， the BGP route needs to be used. What should be configured to make sure that the router will choose the LAN network as the preferred path？（）A、static route needs to be addedB、floating static route needs to be addedC、bgp backdoor commandD、ospf backdoor command
A router receives information about network 192.168.10.0/24 from multiple sources.What will the routerconsider the most reliable information about the path to that network？（）A、an OSPF update for network 192.168.0.0/16B、a static router to network 192.168.10.0/24C、a static router to network 192.168.10.0/24 with a local serial interface configured as the next hopD、a RIP update for network 192.168.10.0/24E、a directly connected interface with an address of 192.168.10.254/24F、a default route with a next hop address of 192.168.10.1
A router has two paths to reach another network in a different autonomous system. Neither route was generated by the local router and both routes have the same default weight an d local preference values. Which statement is true about how BGP would select the best path?（）A、To influence one route to be preferred, its default local preference value will be changed via the use of the command bgp default local - preference 50B、Th e router will prefer the shortest autonomous system pathC、If the command bgp always - compare - med has been given, then the router will prefer the route with the highest MEDD、The router will prefer the route with the lower MED
What is true regarding the OSPF Type 2 LSA?（）A、The DR floods this to describe the local stub network segment.B、The ABR floods this to describe the local stub network segment.C、The DR floods this to describe the local transit network segment.D、Each OSPF router floods this to describe its interfaces and metrics.E、The DR and BDR flood this to describe the local transit network segment.
What does a router do?（）A、Routes traffic down alternative paths and connects the local-area network (LAN) to the wide- area network (WAN)B、Reads Media Access Control (MAC) addresses to forward messages to the correct location and connects the local-area network (LAN) to the wide-area network (WAN)C、Stores data on the network and connects the local-area network (LAN) to the wide-area network (WAN)D、Broadcasts data to all devices that are connected to it across the local-area network (LAN) and wide-area network (WAN)
A router receives information about network 192.168.10.0/24 from multiple sources.What will the router consider the most reliable information about the path to that network?（）A、an OSPF update for network 192.168.0.0/16B、a static router to network 192.168.10.0/24C、a static router to network 192.168.10.0/24 with a local serial interface configured as the next hopD、a RIP update for network 192.168.10.0/24E、a directly connected interface with an address of 192.168.10.254/24F、a default route with a next hop address of 192.168.10.1
A problem was reported that the 10.10.10.0/24 prefix was not injected into the local BGP table ona Company router named R1. The following information is available from this router： R1 Configuration： router bgp 65001 network 10.0.0.0 neighbor 172.16.1.1 remote-as 65002 no auto-summary Routing table information： show ip route | include 10 O 10.10.10.0/24 [110/11] via 192.168.1.1， 2d00h， Ethernet0/0 Why is this prefix not in the local BGP table of the R1？（）A、The 172.16.1.1 neighbor is down.B、The prefix 10.10.10.0/24 is not a ’connected’ routeC、This route is not a BGP learned routeD、The network command is wrongE、None of the other alternatives apply
What are two examples of RE exception traffic?（）A、BGP updates that travel through the local router and are destined for a remote router.B、OSPF hello packets that are sent from a remote router and are destined for the local router.C、Telnet traffic that is sent from a remote host and is destined for the local router.D、Telnet traffic that travels through the local router and is destined for a remote end host.
What is the first step in BGP route selection?（）A、The local router prefers the route with the shortest as-path.B、The router first verifies that it has a route to thebgp Next Hop IP address.C、The local router prefers the route from the peer with the lowest peerid address.D、The local router prefers the route learned from anebgp peer over a route learned from anibgp peer.
What is the first step in BGP route selection?（）A、The local router prefers the route with the shortest AS Path.B、The local router verifies that it has a route to the BGP Next Hop IP address.C、The local router prefers the route from the peer with the lowest peer ID address.D、The local router prefers the route learned from an EBGP peer over a route learned from an IBGP peer.
单选题What is the first step in BGP route selection?（）AThe local router prefers the route with the shortest AS Path.BThe local router verifies that it has a route to the BGP Next Hop IP address.CThe local router prefers the route from the peer with the lowest peer ID address.DThe local router prefers the route learned from an EBGP peer over a route learned from an IBGP peer.
单选题What is the first step in BGP route selection?（）AThe local router prefers the route with the shortest as-path.BThe router first verifies that it has a route to thebgp Next Hop IP address.CThe local router prefers the route from the peer with the lowest peerid address.DThe local router prefers the route learned from anebgp peer over a route learned from anibgp peer.
单选题You have a router running BGP for the MPLS network and OSPF for the local LAN network at the sales office. A route is being learned from the MPLS network that also exists on the OSPF local network.It is important that the router chooses the local LAN route being learned from the downstream switch running OSPF rather than the upstream BGP neighbor. Also，if the local OSPF route goes away，the BGP route needs to be used. What should be configured to make sure that the router will choose the LAN network as the preferred path？（）Astatic route needs to be addedBfloating static route needs to be addedCbgp backdoor commandDospf backdoor command
单选题What is true regarding the OSPF Type 2 LSA?（）AThe DR floods this to describe the local stub network segment.BThe ABR floods this to describe the local stub network segment.CThe DR floods this to describe the local transit network segment.DEach OSPF router floods this to describe its interfaces and metrics.EThe DR and BDR flood this to describe the local transit network segment.
单选题You have a router running BGP for the MPLS network and OSPF for the local LAN network at the sales office. A route is being learned from the MPLS network that also exists on the OSPF local network. It is important that the router chooses the local LAN route being learned from the downstream switch running OSPF rather than the upstream BGP neighbor. Also， if the local OSPF route goes away， the BGP route needs to be used. What should be configured to make sure that the router will choose the LAN network as the preferred path？（）Astatic route needs to be addedBfloating static route needs to be addedCbgp backdoor commandDospf backdoor command
单选题A router receives information about network 192.168.10.0/24 from multiple sources.What will the routerconsider the most reliable information about the path to that network？（）Aan OSPF update for network 192.168.0.0/16Ba static router to network 192.168.10.0/24Ca static router to network 192.168.10.0/24 with a local serial interface configured as the next hopDa RIP update for network 192.168.10.0/24Ea directly connected interface with an address of 192.168.10.254/24Fa default route with a next hop address of 192.168.10.1
单选题A router receives information about network 192.168.10.0/24 from multiple sources. What will the router consider the most reliable information about the path to that network（）。Aa directly connected interface with an address of 192.168.10.254/24Ba static route to network 192.168.10.0/24Ca RIP update for network 192.168.10.0/24Dan OSPF update for network 192.168.0.0/16Ea default route with a next hop address of 192.168.10.1Fa static route to network 192.168.10.0/24 with a local serial interface configured as the next hop
单选题A new router, named TK1, is being installed. You wish to add this router to your existing OSPF network. In doing so, you configure the following: TK1(config)# router ospf 1 TK1(config-router)# network 10.10.10.0 255.255.255.0 area 0 After making this change, you notice that the networks attached to TK1 are not being learned by the other OSPF routers. What could be the cause of this?（）AThe AS is not correctly configuredBThe network subnet mask is incorrectly configuredCThe network wildcard mask is configured incorrectlyDThe network number is not correctly configuredEThe process id is configured incorrectlyFNone of the above