Which remote access VPN addressing technique supports a static IP address to support a specific application？（）A、 Use a static ip addresses based on incoming user policies.B、 Use DHCP to assign addresses based on incoming user policies.C、 Deploy a clientless model to assign a unique address to the user.D、 Deploy RADIUS or LDAP to assign the address to the user.
Which remote access VPN addressing technique supports a static IP address to support a specific application？（）
- A、 Use a static ip addresses based on incoming user policies.
- B、 Use DHCP to assign addresses based on incoming user policies.
- C、 Deploy a clientless model to assign a unique address to the user.
- D、 Deploy RADIUS or LDAP to assign the address to the user.
相关考题：
Which JUNOS software feature allows a user to define specific next－hop values for IP packets based on the source IP address of that packet?() A. MPLSB. Load BalancingC. Class Based ForwardingD. Filter Based Forwarding
Most IP layer-based proxy mechanisms, such as network address translation(NAT), only support uni-directional proxy, from the internal network to external network(the Internet). The proxy establishes the communication channel by(66)IP addresses. The IP addresses must be(67). These proxy mechanisms prevent applications that must establish return data channels from establishing their data channels, such as, multimedia applications. IP layer-based proxy mechanisms need additional software(68)for each application that uses(69)channels. SOCKS identifies communication targets through domain names, overcoming the restriction of using private IP addresses. SOCKS can use domain names to establish communication between separate LANs, with(70)IP addresses.A．manufacturingB．manipulatingC．conductD．implement
In a base e－Commerce module design, which routing statement is correct?() A. Routing is mostly static.B. Hardcoded IP addresses are used to support failover.C. Inbound servers use the CSM or ACE as the default gateway.D. VLANs between the access layer switches are used for FHRP protocols.
Which remote access VPN addressing technique supports a static IP address to support a specific application?() A. Use a staticip addresses based on incoming user policies.B. Use DHCP to assign addresses based on incoming user policies.C. Deploy a clientless model to assign a unique address to the user.D. Deploy RADIUS or LDAP to assign the address to the user.
Static VLANs are being used on the Company network. What is true about static VLANs？（）A、Devices use DHCP to request their VLAN.B、Attached devices are unaware of any VLANs.C、Devices are assigned to VLANs based on their MAC addresses.D、Devices are in the same VLAN regardless of which port they attach to.
What is the result of entering the command port-channel load-balance src-dst-ip on an EtherChannel link？ （）A、Packets are distributed across the ports in the channel based on both the source and destination MAC addresses.B、Packets are distributed across the ports in the channel based on both the source and destination IP addresses.C、Packets are balanced across the ports in the channel based first on the source MAC address， then on the destination MAC address， then on the IP address.D、Packets are distributed across the access ports in the channel based first on the source IP address and then the destination IP addresses.
Which remote access VPN addressing technique supports a static IP address to support a specific application?（）A、Use a staticip addresses based on incoming user policies.B、Use DHCP to assign addresses based on incoming user policies.C、Deploy a clientless model to assign a unique address to the user.D、Deploy RADIUS or LDAP to assign the address to the user.
Which JUNOS software feature allows a user to define specific next-hop values for IP packets based on the source IP address of that packet？（）A、MPLSB、Load BalancingC、Class Based ForwardingD、Filter Based Forwarding
Which two statements are true about overflow pools？（）A、Overflow pools do not support PATB、Overflow pools can not use the egress interface IP address for NATC、Overflow pools must use PATD、Overflow pools can contain the egress interface IP address or separate IP addresses
A system administrator wants to configure 802.1X on an Ethernet switch to enable access to specific parts of the network based on group memberships.How can the administrator accomplish this goal?（）A、Configure roles based on departments and assign access based on source IP address.B、Configure roles based on the user's manager and assign access based on the user's MAC addressC、Configure roles based on group memberships and assign a specific VLAN to the role.D、Configure roles based on RADIUS request attribute and assign a specific VLAN to the role.
Your company uses DHCP to lease IPv4 addresses to computers at the main office. A WAN link connects the main office to a branch office. All computers in the branch office are configured with static IP addresses. The branch office does not use DHCP and uses a different subnet. You need to ensure that the portable computers can connect to network resources at the main office and the branch office. How should you configure each portable computer？（）A、Use a static IPv4 address in the range used at the branch office.B、Use an alternate configureation that contains a static IP address in the range used at the main officeC、Use the address that was assigned by DHCP as a static IP addressD、Use an alternate configuration that contains a static Ip address in the range used at the branch office.
In a configuration with redundant supervisors， how many IP addresses are required to configure full remote access via management 0？（） A、 two IP addresses， one for each supervisorB、 three IP addresses， one virtual IP and one physical IP for each supervisorC、 one IP address that is shared among supervisorsD、 none—management 0 will use the IP address from the first SVI that is created
In a base e-Commerce module design, which routing statement is correct?（）A、Routing is mostly static.B、Hardcoded IP addresses are used to support failover.C、Inbound servers use the CSM or ACE as the default gateway.D、VLANs between the access layer switches are used for FHRP protocols.
Which of the following types of NAT allows multiple private internal IP addresses to use a singlepublic external IP address？（）A、NAT mappingB、NAT overloadingC、NAT cachingD、Static NATE、Dynamic NATF、Overlapping NAT
Which of the following is MOST likely causing a client’s computer to have an IP address of169.254.0.10?（）A、The office is using a public IP scheme.B、The client is set to a static IP address.C、The DHCP server is out of addresses.D、The firewall on the PC is down.
An AIX server is configured with a static IP address but the system administrator wants the server to give out IP addresses for clients who want to use the dynamic host configuration protocol instead of static IP addresses.How is this accomplished？（）A、Use SMIT to have the server use DHCP instead of a static addressB、Edit /etc/rc.tcpip and start the dhcpsd daemonC、Use the network options command to enable ipforwardingD、Edit /etc/rc.net to set network options back to default
How is DHCP enabled on a server？（）A、Use network options to enable ipforwardingB、Edit /etc/rc.tcpip and enable dhcpsdC、Edit /etc/rc.nfs increase the number of biod daemonsD、Use SMIT to set the server to use DHCP instead of static IP addresses
Which statement is true about interface-based static NAT? （）A、It also supports PAT.B、It requires you to configure address entries in the junos-nat zone.C、It requires you to configure address entries in the junos-global zone.D、The IP addresses being translated must be in the same subnet as the incoming interface.
You are designing the IP address assignment strategy for the VPN users. Which two actions should you perform.（）A、 Configure VPN1 as a DHCP Relay Agent.B、 Configure VPN1 to assign IP Address by using DHCP server.C、 Configure VPN1 to have a static pool of IP Address from the network address of 131.107.1.0/24.D、 Configure VPN1 to have a static pool of IP Address from the network address of 192.168.1.0/24.E、 Configure the perimeter firewall to allow inbound DHCP traffic to be passed to VPN1.F、 Configure the interval firewall to allow DHCP broadcasts to be forwarded from the external network to the internal network.
Your company uses DHCP to lease IPv4 addresses to computers at the main office. A WAN link connects the main office to a branch office. All computers in the branch office are configured with static IP addresses. The branch office does not use DHCP and uses a different subnet.You need to ensure that the portable computers can connect to network resources at the main office and the branch office. How should you configure each portable computer？（）A、Use a static IPv4 address in the range used at the branch office.B、Use an alternate configuration that contains a static IP address in the range used at the main office.C、Use the address that was assigned by the DHCP server as a static IP address.D、Use an alternate configuration that contains a static IP address in the range used at the branch office.
单选题Which remote access VPN addressing technique supports a static IP address to support a specific application？（）A Use a static ip addresses based on incoming user policies.B Use DHCP to assign addresses based on incoming user policies.C Deploy a clientless model to assign a unique address to the user.D Deploy RADIUS or LDAP to assign the address to the user.
单选题Your company uses DHCP to lease IPv4 addresses to computers at the main office. A WAN link connects the main office to a branch office. All computers in the branch office are configured with static IP addresses. The branch office does not use DHCP and uses a different subnet. You need to ensure that the portable computers can connect to network resources at the main office and the branch office.How should you configure each portable computer（）？AUse a static IPv4 address in the range used at the branch office.BUse an alternate configuration that contains a static IP address in the range used at the main office.CUse the address that was assigned by the DHCP server as a static IP address.DUse an alternate configuration that contains a static IP address in the range used at the branch office.
单选题Your company uses DHCP to lease IPv4 addresses to computers at the main office. A WAN link connects the main office to a branch office. All computers in the branch office are configured with static IP addresses. The branch office does not use DHCP and uses a different subnet. You need to ensure that the portable computers can connect to network resources at the main office and the branch office. How should you configure each portable computer？（）AUse a static IPv4 address in the range used at the branch office.BUse an alternate configureation that contains a static IP address in the range used at the main officeCUse the address that was assigned by DHCP as a static IP addressDUse an alternate configuration that contains a static Ip address in the range used at the branch office.
单选题An AIX server is configured with a static IP address but the system administrator wants the server to give out IP addresses for clients who want to use the dynamic host configuration protocol instead of static IP addresses.How is this accomplished？（）AUse SMIT to have the server use DHCP instead of a static addressBEdit /etc/rc.tcpip and start the dhcpsd daemonCUse the network options command to enable ipforwardingDEdit /etc/rc.net to set network options back to default
单选题Which statement is true about interface-based static NAT? （）AIt also supports PAT.BIt requires you to configure address entries in the junos-nat zone.CIt requires you to configure address entries in the junos-global zone.DThe IP addresses being translated must be in the same subnet as the incoming interface.
单选题In a configuration with redundant supervisors， how many IP addresses are required to configure full remote access via management 0？（）A two IP addresses， one for each supervisorB three IP addresses， one virtual IP and one physical IP for each supervisorC one IP address that is shared among supervisorsD none—management 0 will use the IP address from the first SVI that is created
单选题Which remote access VPN addressing technique supports a static IP address to support a specific application?（）AUse a staticip addresses based on incoming user policies.BUse DHCP to assign addresses based on incoming user policies.CDeploy a clientless model to assign a unique address to the user.DDeploy RADIUS or LDAP to assign the address to the user.