Which of the following is MOST likely causing a client’s computer to have an IP address of169.254.0.10?（）A、The office is using a public IP scheme.B、The client is set to a static IP address.C、The DHCP server is out of addresses.D、The firewall on the PC is down.
Which of the following is MOST likely causing a client’s computer to have an IP address of169.254.0.10?（）
- A、The office is using a public IP scheme.
- B、The client is set to a static IP address.
- C、The DHCP server is out of addresses.
- D、The firewall on the PC is down.
相关考题：
The Dynamic Host Configuration Protocol provides configuration parameters to Intemet （ ）. DHCP consists of two components: a （ ） for delivering host-specific configuration parameters from a DHCP server to a host and a mechanism for allocation of network addresses to hosts. DHCP is built on a client-server model, where designated DHCP server hosts allocate network addresses and deliver （ ） parameters to dynamically configured hosts. DHCP supports three mechanisms for IP address allocation. In automatic allocation, DHCP assigns a （ ） IP address to a client. In dynamic allocation, DHCP assigns an IP address to a client for a limited period of time. In manual allocation, a clients IP address is assigned by the network （ ）, and DHCP is used simply to convey the assitped address to the client.A.switchB.termmalC.hostsD.usersA.routerB.protocolC.hostD.mechanismA.controlB.broadcastC.configurationD.transmissionA.permanentB.dynamicC.cormectionD.sessionA.controllerB.userC.hostD.administrator
The Dynamic Host Configuration Protocol provides configuration parameters to Internet（ ）.DHCP consists of two components:a（ ）for delivering host-specifie configuration parameters from a DHCP server to a host and a mechanism for allocation of network addresses to hosts.DHCP is built on a client-server model,where designated DHCP server hosts allocate network addresses and deliver（ ）parameters to dynamically configured hosts.DHCP supports three mechanisms for IP address allocation.In“automatic allocation”,DHCP assigns a（本题）IP address to client.In“dynamic allocation”,DHCP assigns an IP address to a client for a limited period of time.In“manual allocation”,a client’s IP address is assigned by the network（ ）,and DHCP is used simply to convey the assigned address to the client.A.permanentB.dynamicC.connectionD.session
In what situation would the command ip helper-address be required？（Choose the best answer.）（）A、Only when there is a duplicate IP address caused by a combination of static and dynamic IPaddress allocationsB、On each router that exists between the client and the serverC、Only when a router separates the client from the serverD、Only if the DHCP sever issues a DHCPNAK to the initial requestE、Only when the client is on the same subnet as the serverF、Only when the DHCP pool is out of IP addresses
Which is the result of enabling IP Source Guard on an untrusted switch port that does not have DHCP snooping enabled？（）A、DHCP requests will be switched in the software， which may result in lengthy response times.B、The switch will run out of ACL hardware resources.C、All DHCP requests will pass through the switch untested.D、The DHCP server reply will be dropped and the client will not be able to obtain an IP address.
You are the network administrator for Company. Your network is a native mode Windows 2000 domain consisting of 50 Windows 2000 Professional client computers and six Windows 2000 Server computers. There are no routers on the network. The client computers have been configured for dynamic IP address application. The network is configured as shown in the Network Diagram. A user reports that she cannot connect to the server named ES1 from her client computer named Workstation5. When she attempts to browse //ES1 from the Run line she receives the message, “The network path was not found”. No other users are reporting problems connecting to ES1. From the user’s computer, you browse //192.168.72.6 from the Run line and successfully connect to the server. You run the ipconfig /all command. The relevant results are shown in the following table. You want the user to be able to access resources on ES1 by using the computer name. What should you do? （）A、On the Internet Protocol (TCP/IP) Properties, sheet, select the Obtain DNS server address automatically option.B、On the Internet Protocol (TCP/IP) Properties, sheet, select the Obtain an IP address automatically option. C、Configure the client computer with a default gateway of 192.168.0.1.D、Configure the client computer with a subnet mask of 255.255.0.0.E、Configure the client computer with a WINS server of 192.168.72.5.
A server has been assigned the 192.168.100.127/25 IP address. The server is experiencing strange network connectivity related problems. Which of the following would BEST describe the problem?（）A、IP address is classful.B、IP address is a subnet broadcast address.C、IP address is a subnet network address.D、IP address is classless
You have a Bridged 1483 service offering where each ATM PVC is assigned a /30 subnet. What are two characteristics of this configuration？（）A、It burns IP addresses.B、It conserves IP addresses.C、Both the client and the ERX Edge Router have IP addresses.D、The client has an IP address， but the ERX Edge Router uses an unnumbered address.
You are the administrator of a Windows 2000 network. You install Windows 2000 Professional on a new computer and configure the TCP/IP settings to have a static IP address. While testing network connectivity from the new computer, you discover an error in the DNS server address that is configured in the TCP/IP settings. You configure the correct DNS server address, which is 10.1.1.5. However, you are still unable to successfully connect to network resources by name. You run the IPconfig/all command. The results indicate that the DNS server address is now configured as 0.0.0.0 You need to ensure that the computer can connect to network resources by name. What should you do?（）A、Stop and restart the DNS Client service.B、Add 10.1.1.5 to the DNS server list on the TCP/IP Advanced Properties tab.C、Add an A （host） record for the computer to the DNS server’s zone file.D、Configure your DHCP server to have a DNS server address of 10.1.1.5.
Your company has 250 client computers connected to the office LAN. The company has a pool of five public IP addresses. All client computers have dynamically assigned IP addresses. You need to provide all client computers with Internet access. What should you use？（）A、 DHCP Relay AgentB、 Routing Information Protocol （RIP）C、 Internet Group Management Protocol （IGMP）D、 Network Address Translation （NAT）/Basic Firewall
Server load balancing （SLB） is the process of deciding to which server a load-balancing device should send a client request for service. Which predictors are supported on ACE in order to select the best server to fulfill a client request？ （）A、 Hash address： Selects the server by using a hash value based on either the source or destination IP address， or bothB、 Hash URL： Selects the server by using a hash value based on the requested URLC、 Hash MAC.Selects the server by using a hash value based on either the source or destination MAC address， or bothD、 Hash header： Selects the server by using a hash value based on the HTTP header nameE、 Hash IP： Selects the server using a hash value based on the IP address
If authentication is enabled，which statement is true？（）A、client reports will display authenticated usernamesB、client reports will display both the username and IP address of the clientsC、client reports are not affected by authenticationD、client reports will display the IP address of the authentication server
A user is attempting to access a website but is getting a ‘Page cannot be displayed’ error. The technician checks the IP address of the computer and sees that it has been assigned 169.254.10.70. Which of the following is the MOST likely cause?（）A、The device is located behind a firewall.B、The network card is disabled.C、The device is not configured for DHCP.D、The device cannot locate a DHCP server.
A computer that has dynamic IP addressing is not receiving an IP address. Which of the following is MOST likely the problem?（）A、SNMPB、DHCPC、DNSD、NAT
A customer reports they are unable to connect to any computers outside of the office and they are unable to connect to the Internet. When the technician runs ipconfig, the customer gets the following output: IP address169.254.2.4 Subnet Mask.255.255.0.0 Default Gateway. Which of the following could be causing the issue?（）A、The subnet mask is not correctly configured.B、The DNS client has not been configured on the computer.C、The DHCP client is unable to obtain an IP address from the DHCP server.D、The default gateway is not specified
On a Windows network, users are reporting that they cannot access any network resources. The users can ping the IP address and connect to the network resource using the IP address. Which of the following is the cause of the problem?（）A、The file server is offline.B、The DNS server is not resolving correctly.C、The DHCP server is not assigning correct IP addresses.D、The domain controller is not responding.
A client is having trouble connecting to the Internet. The client is using a static IP address and is able to connect to other devices on the network via IP address only. Which of the following is MOST likely the problem?（）A、IMAPB、DHCPC、DNSD、NAT
ompany.com has recently received a new p5-570 in the data center and wants to connect it to an existing HMC environment where each of the existing POWER5 servers has been assigned a static IP address. Which of the following actions should the technical specialist perform to set the service processor network address for a static IP？（）A、Configure the IP address through the first client partition.B、Configure the IP address through the ASMI menus.C、Configure the POWER5 service processor for DHCP from the HMC DHCP server.D、Configure the HMC to use the default IP address on the service processor when acquiring the managed server.
You are designing the IP address assignment strategy for the VPN users. Which two actions should you perform.（）A、 Configure VPN1 as a DHCP Relay Agent.B、 Configure VPN1 to assign IP Address by using DHCP server.C、 Configure VPN1 to have a static pool of IP Address from the network address of 131.107.1.0/24.D、 Configure VPN1 to have a static pool of IP Address from the network address of 192.168.1.0/24.E、 Configure the perimeter firewall to allow inbound DHCP traffic to be passed to VPN1.F、 Configure the interval firewall to allow DHCP broadcasts to be forwarded from the external network to the internal network.
You have two Exchange Server 2010 servers that have the Client Access， Hub Transport， and Mailbox server roles installed.The servers are members of a database availability group （DAG）.You need to ensure that all users can access the Client Access server if a single server or service fails.What should you do？（）A、from DNS manager， create two new records for the Client Access servers.B、from Failover Cluster Manager， create a new service named Client Access Server and assign a new IP address.C、Install the Network Load Balancing feature on each server and assign a second IP address to each network adapter.D、Deploy a hardware load balancer.Create a DNS record for the virtual IP address and configure a Client Access server array.
Your network consists of a single Active Directory domain. You have a DHCP server named DHCP1 that runs Windows Server 2003 Service Pack 2 (SP2). All client computers run Windows XP Service Pack 3 (SP3). All client computers are configured as DHCP clients. You change the IP address on DHCP1. Users report that they cannot connect to the network. You verify that the client computers do not receive an IP address configuration from DHCP1. You need to ensure that the client computers receive an IP address configuration from DHCP1. What should you do on DHCP1? （）A、Authorize the server.B、Reconcile the scope.C、Enable conflict resolution.D、Restore the server configuration by using the DHCP snap-in.
Your network consists of a single Active Directory domain. You have a DHCP server named DHCP1 that runs Windows Server 2003 Service Pack 2 （SP2）. All client computers run Windows XP Service Pack 3 （SP3）. All client computers are configured as DHCP clients. You change the IP address on DHCP1. Users report that they cannot connect to the network. You verify that the client computers do not receive an IP address configuration from DHCP1. You need to ensure that the client computers receive an IP addressconfiguration from DHCP1. What should you do on DHCP1？（）A、Authorize the server.B、Reconcile the scope.C、Enable conflict resolution.D、Restore the server configuration by using the DHCP snap-in.
Your company uses DHCP to lease IPv4 addresses to computers at the main office. A WAN link connects the main office to a branch office. All computers in the branch office are configured with static IP addresses. The branch office does not use DHCP and uses a different subnet.You need to ensure that the portable computers can connect to network resources at the main office and the branch office. How should you configure each portable computer？（）A、Use a static IPv4 address in the range used at the branch office.B、Use an alternate configuration that contains a static IP address in the range used at the main office.C、Use the address that was assigned by the DHCP server as a static IP address.D、Use an alternate configuration that contains a static IP address in the range used at the branch office.
Which statement is true about "sticky" load balancing for Clusters? （）A、The "clientip" setting does not apply to clusters, it only pertains to a Forwarder.B、When set to "clientip" it uses the client's IP address to bind the client to a particular target server.C、When set to "clientip" it allows a DX sticky cookie to be sent to and stored by the client based on the IP address.D、When set to "clientip" it ensures that all subsequent requests are directed to the same client that made the initial request.
单选题Which of the following is MOST likely causing a client’s computer to have an IP address of169.254.0.10?（）AThe office is using a public IP scheme.BThe client is set to a static IP address.CThe DHCP server is out of addresses.DThe firewall on the PC is down.
单选题A customer reports they are unable to connect to any computers outside of the office and they are unable to connect to the Internet. When the technician runs ipconfig, the customer gets the following output: IP address169.254.2.4 Subnet Mask.255.255.0.0 Default Gateway. Which of the following could be causing the issue?（）AThe subnet mask is not correctly configured.BThe DNS client has not been configured on the computer.CThe DHCP client is unable to obtain an IP address from the DHCP server.DThe default gateway is not specified
单选题A user is attempting to access a website but is getting a ‘Page cannot be displayed’ error. The technician checks the IP address of the computer and sees that it has been assigned 169.254.10.70. Which of the following is the MOST likely cause?（）AThe device is located behind a firewall.BThe network card is disabled.CThe device is not configured for DHCP.DThe device cannot locate a DHCP server.
单选题Which is the result of enabling IP Source Guard on an untrusted switch port that does not have DHCP snooping enabled？（）ADHCP requests will be switched in the software， which may result in lengthy response times.BThe switch will run out of ACL hardware resources.CAll DHCP requests will pass through the switch untested.DThe DHCP server reply will be dropped and the client will not be able to obtain an IP address.