单选题A customer wants to TFTP a new image from the corporate network to Flash on the Teleworker router through the IPSec tunnel. How should you configure the Teleworker router?（）ANo additional steps are required. BAdd the appropriate source-interface command. CThe router cannot access a server in the Enterprise Campus network. DThe Teleworker Router does not have any client applications; therefore this type of request is not possible.
单选题
A customer wants to TFTP a new image from the corporate network to Flash on the Teleworker router through the IPSec tunnel. How should you configure the Teleworker router?（）
A
No additional steps are required.
B
Add the appropriate source-interface command.
C
The router cannot access a server in the Enterprise Campus network.
D
The Teleworker Router does not have any client applications; therefore this type of request is not possible.
参考解析
解析：
暂无解析
相关考题：
As you start writing, new ideas will naturally emerge, but always keep them focused on your targeted customer, so you won't go off the track of what your customer wants.
Which three actions must you perform as part of the WXOS software upgrade process?()(Choose three.) A. Reboot the device.B. Reapply the license key.C. Save the current configuration.D. Load the image using FTP, TFTP, or from the local disk.E. Back up the configration using FTP, TFTP, or to the local disk
You need to upgrade the IOS of an existing router on your network. The new IOS image is located on a TFTP server that you have set up within the network. What command should you issue in order to download the new IOS version?（）A. Router# copy tftp flashB. Router# copy flash runC. Router(config)# restore flashD. Router(config)# repair flashE. Router#copy flash tftpF. Router# copy start flash
A customer wants to TFTP a new image from the corporate network to Flash on the Teleworker router through the IPSec tunnel. How should you configure the Teleworker router?（）A、No additional steps are required. B、Add the appropriate source-interface command. C、The router cannot access a server in the Enterprise Campus network. D、The Teleworker Router does not have any client applications; therefore this type of request is not possible.
If XYZ LTD needs to upgrade the Cisco IOS Software of a Cisco Router, Where is the best place to download the upgrade image file from?（）A、The best option is to download it from the Cisco TAC websiteB、The best option is to download it from the Cisco.Com Software support siteC、The best option is to download it form the Cisco Advanced Services websiteD、The best option is to download it from the TFTP site on Cisco.com
You need to upgrade the IOS of an existing router on your network. The new IOS image is located on a TFTP server that you have set up within the network. What command should you issue in order to download the new IOS version?（）A、Router# copy tftp flashB、Router# copy flash runC、Router(config)# restore flashD、Router(config)# repair flashE、Router#copy flash tftpF、Router# copy start flash
When upgrading the IOS image, the network administrator receives the exhibited error message. What could be the cause of this error?（）A、The new IOS image is too large for the router flash memory.B、The TFTP server is unreachable from the router.C、The new IOS image is not correct for this router platform.D、The IOS image on the TFTP server is corrupt.E、There is not enough disk space on the TFTP server for the IOS image.
You are upgrading your Cisco router IOS from a TFTP server over the network. The upgrade procedure is stopped and you are prompted to erase the current flash contents before continuing. What is most plausible reason for this? （）A、There is insufficient room for more than one image.B、The router has detected a copy of the current software image on the TFTP server.C、The file can be relocated and not compressed.D、The image to load is a binary executable file.
A cisco router is booting and has just completed the POST process.It is now ready to find and load an IOS image.what function does the router perform next？（）A、It checks the configuration registerB、It attempts to boot from a TFTP serverC、It loads the first image file in flash memoryD、It inspects the configuration file in NVRAM for boot instructions
What is the purpose of the secure boot-config global configuration ？（）A、takes a snapshot of the router running configuration and securely archives it in persistent storageB、stores a secured copy of the Cisco IOS image in its persistent storageC、backs up the Cisco IOS image from flash to a TFTP serverD、enables Cisco IOS image resilience
Refer to the exhibit. For what two reasons has the router loaded its IOS image from the location that is shown? （）A、Router1 has specific boot system command that instruct it to load IOS from TFTP server.B、Router1 is acting as a TFTP server for other routers.C、Router1 cannot locate a valid IOS image in flash memory.D、Router1 defaulted to ROMMON mode and loaded the IOS image from a TFTP server.E、Cisco routers will first attempt to load a image from TFTP for management purposes.
The technician is working on a system and has determined that the hard drive must be reimaged. However, the customer wants to retain all the data. Which of the following would take the LEAST amount of time to implement?（）A、Create a new partition on the hard drive, copy all data to the new partition, reimage the drive, and the old data will be on the new partition and accessible.B、Install a new hard drive, slave the old drive, image the new drive, and show the customer how to access their data on the old drive.C、Upload the data to an external FTP server, reimage the drive, and then restore the data to the newly imaged drive.D、Copy data to a USB connected hard drive, reimage the drive, and then restore the data to the newly imaged drive.
A technical consultant needs to deploy a Microsoft Windows 2003 server image from a single x336 to five new x336 servers using Remote Deployment Manager （RDM）. After installing and configuring RDM and loading the installation image， the consultant wants to deploy the first server. After the new x336 is booted， it is unable to connect to the RDM server. Which of the following is the most likely cause of the problem？（）A、The new server is not PXE-enabled.B、The RDM agent is not configured on the RDM server.C、The IBM Director agent is not installed on the new server.D、A DHCP server is not installed or configured the network.
A customer is running a number of non-IBM servers purchased two years ago and has settled on one of the new IBM xSeries servers as a migration path. From the following options， which is the preferred migration path？（）A、Copy the image of the non-IBM servers and copy that image to the IBM servers， then reboot the IBM servers.B、Copy the image from the non-IBM servers with RDM and install them with IBM Director to the new IBM servers. Reboot the IBM servers.C、Install a fresh operating system using ServerGuide， and then install the applications and copy the data from the old servers.D、Install a fresh operating system on the IBM servers and then run ServerGuide on the IBM servers to migrate the applications and data to the IBM servers.
A customer has a pSeries that needs to be upgraded from AIX Version 5.1 to AIX Version 5.2. The customer wants to retain /etc/passwd. Which of the following installation types should be used？（）A、Preservation InstallB、Retention InstallC、Overwrite InstallD、Migration Install
Mike has been using RIS (Remote Installation Services), to install all new workstations on his network. A new Service Pack has recently been released from Microsoft and he wants to update his new image. He brings up his test workstation that has Windows 2000 Professional on it and installs the new Service Pack. What is the next step Mike must take?（）A、Slipstream this Service Pack to the CD image on the RIS Server.B、Use xcopy to copy all files to the RIS server.C、Run Riprep.exeD、Run Sysprep.exe
Your company uses Windows Deployment Services (WDS) to deploy Windows 7. You create a new imageof Windows 7. You need to ensure that you can deploy the image by using WDS. What should you do?（）A、From the Windows Deployment Services snap-in， add a new install image.B、From the Windows Deployment Services snap-in， add a new boot image.C、Run Oscdimg.exe and specify the -boot parameter. Copy the image to C:///remoteinstall/boot.D、Run Imagex.exe and specify the /append parameter. Copy the image to C:///remoteinstall/images.
单选题You are upgrading your Cisco router IOS from a TFTP server over the network. The upgrade procedure is stopped and you are prompted to erase the current flash contents before continuing. What is most plausible reason for this? （）AThere is insufficient room for more than one image.BThe router has detected a copy of the current software image on the TFTP server.CThe file can be relocated and not compressed.DThe image to load is a binary executable file.
多选题Refer to the exhibit. For what two reasons has the router loaded its IOS image from the location that is shown? （）ARouter1 has specific boot system command that instruct it to load IOS from TFTP server.BRouter1 is acting as a TFTP server for other routers.CRouter1 cannot locate a valid IOS image in flash memory.DRouter1 defaulted to ROMMON mode and loaded the IOS image from a TFTP server.ECisco routers will first attempt to load a image from TFTP for management purposes.
单选题A customer wants to migrate their existing cluster onto new POWER6 hardware， and in addition requires thecluster to be migrated from PowerHA version 5.3 to 5.5. Given that AIX 6.1 and PowerHA 5.5 filesets arealready installed in the new hardware， which of the following methods would allow the customer to maintaintheir current cluster configuration？（）AAdd the new nodes to the existing cluster， and perform a rolling migration and remove the original nodesfrom the clusterBAdd the new nodes to the existing cluster， and perform a non-disruptive upgrade and remove the originalnodes from the cluster.CCreate a snapshot of the existing cluster and apply the snapshot to the new cluster. Start cluster serviceson the new cluster and stop the original clusterDCreate a snapshot of the existing cluster and apply the snapshot to the new cluster. Stop cluster serviceson the original cluster and start on the new cluster
多选题Which three actions must you perform as part of the WXOS software upgrade process?（）(Choose three.)AReboot the device.BReapply the license key.CSave the current configuration.DLoad the image using FTP, TFTP, or from the local disk.EBack up the configration using FTP, TFTP, or to the local disk
单选题Which result is of securing the Cisco IOS image by use of the Cisco IOS image resilience feature？（）AThe Cisco IOS image file will not be visible in the output from the show flash command.BThe show version command will not show the Cisco IOS image file location.CWhen the router boots up， the Cisco IOS image will be loaded from a secured FTP location.DThe running Cisco IOS image will be encrypted and then automatically backed up to a TFTP server.
单选题A technical consultant needs to deploy a Microsoft Windows 2003 server image from a single x336 to five new x336 servers using Remote Deployment Manager （RDM）. After installing and configuring RDM and loading the installation image， the consultant wants to deploy the first server. After the new x336 is booted， it is unable to connect to the RDM server. Which of the following is the most likely cause of the problem？（）AThe new server is not PXE-enabled.BThe RDM agent is not configured on the RDM server.CThe IBM Director agent is not installed on the new server.DA DHCP server is not installed or configured the network.
单选题A customer wants to send JMS messages to a remote WebLogic server from a Java SE application over an unreliable network connection. Which feature of WebLogic JMS will enable the customer to send messages from a Java SE client to a JMS destination that is not always easily reached?（）ASAF TargetBSAF Imported DestinationCSAF ClientDSAF ServerEDistributed SAF JMS
单选题A cisco router is booting and has just completed the POST process.It is now ready to find and load an IOS image.what function does the router perform next?（）AIt checks the configuration registerBIt attempts to boot from a TFTP serverCIt loads the first image file in flash memoryDIt inspects the configuration file in NVRAM for boot instructions
单选题When upgrading the IOS image, the network administrator receives the exhibited error message. What could be the cause of this error?（）AThe new IOS image is too large for the router flash memory.BThe TFTP server is unreachable from the router.CThe new IOS image is not correct for this router platform.DThe IOS image on the TFTP server is corrupt.EThere is not enough disk space on the TFTP server for the IOS image.
单选题A customer wants to TFTP a new image from the corporate network to Flash on the Teleworker router through the IPSec tunnel. How should you configure the Teleworker router?（）ANo additional steps are required. BAdd the appropriate source-interface command. CThe router cannot access a server in the Enterprise Campus network. DThe Teleworker Router does not have any client applications; therefore this type of request is not possible.
单选题You need to upgrade the IOS of an existing router on your network. The new IOS image is located on a TFTP server that you have set up within the network. What command should you issue in order to download the new IOS version?（）ARouter# copy tftp flashBRouter# copy flash runCRouter(config)# restore flashDRouter(config)# repair flashERouter#copy flash tftpFRouter# copy start flash