You are the administrator of a Windows 2000 Server network that runs in mixed mode. You install a new Windows 2000 Server computer. You create and share a new HP LaserJet 4L printer.Your Windows 2000 Professional client computer can print to the new printer successfully. However, when users try to connect to the printer from Windows NT Workstation 4.0 client computers, they receive the dialog box shown in the exhibit.You want the printer driver to install automatically on the Windows NT Workstation computers. What should you do?A．Copy the Windows NT 4.0 printer drivers to the Netlogon shared folders on all Windows NT Server 4.0 computers still configured as BDCs.B．Copy the Windows NT 4.0 printer drivers to the Netlogon shared folders on the PDC emulator.C．Change the sharing options on the printer to install additional drivers for Windows NT 4.0 or Windows 2000.D．Copy the Windows NT 4.0 printer drivers to the Winnt\System32\printers\drivers folder on the Windows 2000 print Server.
You are the administrator of a Windows 2000 Server network that runs in mixed mode. You install a new Windows 2000 Server computer. You create and share a new HP LaserJet 4L printer.
Your Windows 2000 Professional client computer can print to the new printer successfully. However, when users try to connect to the printer from Windows NT Workstation 4.0 client computers, they receive the dialog box shown in the exhibit.
You want the printer driver to install automatically on the Windows NT Workstation computers. What should you do?
A．Copy the Windows NT 4.0 printer drivers to the Netlogon shared folders on all Windows NT Server 4.0 computers still configured as BDCs.
B．Copy the Windows NT 4.0 printer drivers to the Netlogon shared folders on the PDC emulator.
C．Change the sharing options on the printer to install additional drivers for Windows NT 4.0 or Windows 2000.
D．Copy the Windows NT 4.0 printer drivers to the Winnt\System32\printers\drivers folder on the Windows 2000 print Server.
相关考题：
You want to install Windows 2000 Professional on 20 new PXE compliant computers, which do not have operating systems installed. You create a RIS image and load the image onto the RIS server and then start the new computers. You find that the new computers cannot connect to the RIS server. You verify that existing client computers on the network can connect to network servers.What should you do? (SELECT AND PLACE)
Ezonexam.com's network consists of Windows 2000 Professional and UNIX client computers. You install a Windows 2000 Server computer on the network. All computers that are connected to the network use TCP/IP as their only network protocol.Several laser print devices are attached to the UNIX computers. You want to enable the Windows 2000 Professional computers to print to these printers. You want to make the minimum number of configuration changes necessary to achieve this goal.What should you do?A．Install Simple TCP/IP services on the Windows 2000 Server computer. Configure printers on the Windows 2000 Server computer to print to the print device attached to the UNIX computers.B．Install Print Services for UNIX on the Windows 2000 Server computer. Configure shared printers on the Windows 2000 Server computer. Configure the UNIX computers to print to these shared printers.C．Disconnect the print devices from the UNIX computers and connect them to the Windows 2000 Server computer. Share the printers, and configure the Windows 2000 Professional computers and the UNIX computers to print to the shared printers.D．On the Windows 2000 Server computer, configure shared printers that connect to the print devices attached to the UNIX computers. Configure the Windows 2000 Professional computers to print to the shared printers on the Windows 2000 Server computer.
You are the network administrator for Ezonexam. You are preparing to install Windows 2000 Server on a new computer. The computer is connected to a network that includes Windows 98 computers and Windows 2000 Server computers.You want to install Windows 2000 Server from source files that are located on a shared folder called I386 on a Windows 2000 Server computer named Ezonexam1.What should you do? (Each correct answer presents part of the solution. Choose two)A．On a Windows 2000 computer, use Makebt32.exe to create installation startup disks. Start the new computer by using the first disk.B．On a Windows 2000 computer, format a floppy disk. Copy NTLDR, Boot.ini, Ntdetect.com, and Ntbootdd.sys to this disk. Start the new computer by using the disk.C．Start the new computer by using a Windows 98 network boot disk.D．Connect to \\Ezonexam1\I386 and run Winnt32.exe.E．Connect to \\Ezonexam1\I386 and run Winnt.exe.
You are the administrator of a network that consists of a single Windows NT 4.0 domain. The network contains five Windows NT Server domain controllers and 1,000 Windows NT Workstation client computers.You want to install Windows 2000 Server on a new computer. You want the new computer to act as domain controller in the existing domain.What should you do?A．On the new computer, install Windows NT Server 4.0 and designate the computer as a BDC in the existing domain. Promote the computer to the PDC of the domain. Upgrade the computer to Windows 2000 Server.B．On the new computer, install Windows NT Server 4.0 and designate the computer as a PDC in a new domain that has the same NetBIOS name as the existing Windows NT domain. Upgrade the computer to Windows 2000 Server. Use the Active Directory sites and services to force synchronization of the domain controllers.C．Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory, specifying the same NetBIOS name for the Windows 2000 domain as the existing Windows NT domain. Restart the Windows NT PDC on the network and demote it to a BDC.D．Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory as a replica in the existing Windows NT domain. Promote the new computer to the PDC of the domain. Restart Windows NT PDC on the network and demote it to a BDC.
You are the administrator for your company's network. The network is configured as shown in the exhibit.You want to install Windows 2000 Professional on 20 new PXE-compliant computers on the marketing segment of your network. The new computers do not have operating systems installed.You create a RIS image. You load the image onto the RIS server. You then start the new computers.You find that the new computers cannot connect to the RIS server. You verify that the new computers cannot connect to the RIS server. You verify that the existing client computers in the network can connect to the network servers, including the RIS server. You want to enable the new computers to connect to the RIS server.What should you do?A．Add a Windows 2000 Server computer running WINS to the network.B．Add a Windows 2000 Server computer running DHCP to the network.C．Add the domain Everyone group to the RIS OS image security settings.D．Place the new computers on the same segment as the RIS server.
You are the administrator for Ezonexam's network.Your network includes Windows 2000 Professional client computers, Windows 2000 Server computers, Windows XP Professional computers, and UNIX client computers. Users of the UNIX operating system send print jobs to shared printers on a UNIX computer named PrintServ.You want to make the shared printers on PrintServ available to the Windows 2000 Professional computers, the Windows 2000 Server computers and the Windows XP Professional computers.What should you do?A．Use the SRVANY utility from the Windows NT Resource Kit to run the LPR program as a service.B．Configure each of the printers to support TCP/IP printing.C．Create an LPR port on each client that is configured to use PrintServ.D．Configure each of the printers to use LPR port
Your network includes Windows 98 computers and Windows 2000 Server computers. You are adding a new computer to the network, and you plan to install Windows 2000 Server on the new computer. The computer has one 20-GB hard disk with no partitions defined.The Windows 2000 Server CD-ROM is unavailable. You want install Windows 2000 Server from source files that are located on a server on the network. You also want the entire hard disk of the new computer to be used for the system partition.What should you do?A．On another Windows 2000 computer, use Makebt32.exe to create installation startup disks. Start the new computer by using the first disk.B．On another Windows 2000 computer, format a floppy disk. Copy NTLDR, Boot.ini, Ntdetect.com, Ntbootdd.sys to this disk. Start the new computer by using the disk.C．Start the new computer by using a Windows 98 network boot disk. Connect to the network server. Run Dsclient.exe. Create and format a 20-GB FAT32 partition.D．Start the new computer by using a Windows 98 network boot disk. Create and format a single FAT32 partition. Connect to the network server. Run Winnt.exe.E．Start the computer by using a Windows 98 network boot disk. Create and format a single FAT32 partition. Start the new computer by using a Windows 2000 Emergency Repair Disk.
You are the administrator of a Windows 2000 network. Your network includes 75 Windows NT Workstation 4.0 computers. You are adding 50 new PXE-compliant computers to the network. The hardware on each computer is configured identically.You are using a RIS image to deploy Windows 2000 Professional to the 50 computers. You successfully install Windows 2000 Professional on the first 10 computers. However, you cannot install Windows 2000 Professional on remaining 40 computers.What should you do?A．Configure the DHCP scope to add additional IP addresses.B．Run Rbfg.exe from the RemoteInstall\Admin folder on the RIS server.C．Modify the startup sequence in the CMOS of the remaining computers.D．Create computer accounts on the remaining computers in the Active Directory.
You are preparing to install Windows 2000 Server on a new computer. The computer is connected to a network that includes Windows 98 computers and Windows 2000 Server computers.You want to install Windows 2000 Server from source files that are located on a server on the network.What should you do?A．Start the new computer by using a Windows 98 network boot disk. Connect to the network server. Run Winnt32.exe.B．Start the new computer by using Windows 98 network boot disk. Connect to the network server. Run Winnt.exe.C．On a Windows 2000 Server computer, use Makebt32.exe to create installation startup disk. Start the new computer by using the first disk.D．On a Windows 2000 computer, format a floppy disk. Copy NTLDR, boot.ini, Ntdetect.com, Ntbootdd.sys to this disk. Start the new computer by using the disk.
You are the administrator of Microsoft Windows 2000 computer. You are preparing to install SQL Server 2000 on the computer.Your company contains a variety of client computers that will connect to the SQL server 2000 computer by using a specific Net-Library, as shown in the following table.You need to allow the client computers to connect to the SQL Server 2000 computer. You also want to minimize the number of configuration changes required on the client computers.Which three actions should you take? (Each correct answer presents part of the solution. Choose three)A. Install SQL Server 2000 as a named instance.B. Install SQL Server 2000 as the default instance.C. Configure the new instance for Mixed Mode Authentication.D. Configure the new instance for Windows Authentication.E. Configure the server to use the Named Pipes, IPX/SPX, and TCP/IP Net-Libraries.F. Configure the server to use the Multiprotocol Net-Library.
Your computer runs Microsoft Windows XP Professional. You share your computer with two other co-workers. You purchase a new computer. You install Microsoft Windows Vista on the new computer. You need to migrate the following content from the old computer to the new computer:All system and program settingsAll users settingsOnly the content in the C:\Appdata folderWhich tool should you use?（）A.AB.BC.CD.D
You are the administrator of Company.com's Windows 2000 Network. The routed TCP/IP network that you administer consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. All computers are members of a single Windows 2000 domain named Company.com. TCP/IP is the only network protocol used at Company's office. You have recently installed 10 new Windows 2000 Professional computers and you want to enable the new computers to use host names to connect to shared resources on the network. You configure a TCP/IP address and a gateway address on each new computer. You want to complete the configuration to allow the computers to communicate on the network. What should you do?（）A、Configure a DNS suffix.B、Configure a subnet mask.C、Configure an LMHOSTS file.D、Configure an Interface metric.E、Configure at least one DNS address.
You are the administrator of a Windows 2000 network. You install Windows 2000 Professional on a new computer and configure the TCP/IP settings to have a static IP address. While testing network connectivity from the new computer, you discover an error in the DNS server address that is configured in the TCP/IP settings. You configure the correct DNS server address, which is 10.1.1.5. However, you are still unable to successfully connect to network resources by name. You run the IPconfig/all command. The results indicate that the DNS server address is now configured as 0.0.0.0 You need to ensure that the computer can connect to network resources by name. What should you do?（）A、Stop and restart the DNS Client service.B、Add 10.1.1.5 to the DNS server list on the TCP/IP Advanced Properties tab.C、Add an A （host） record for the computer to the DNS server’s zone file.D、Configure your DHCP server to have a DNS server address of 10.1.1.5.
You are the network administrator for Company. Your network consists of one Windows NT Server 4.0 domain and 35 Windows 2000 Professional computers. The network consists of five interconnected TCP/IP subnets. All of the computers use TCP/IP as the only network protocol. You are adding 15 Windows 2000 Professional computers to the network. You configure each of the new computers to use DHCP. The computers can communicate with each other but are unable to communicate outside their own subnet. You run the ipconfig command to examine the UP address on one of the new computers. The IP address is 169.254.101.72 You want to enable the Windows 2000 Professional computers to communicate outside their own subnet. What should you do?（）A、Install a DHCP server.B、Install a WINS server. Configure each computer to use WINS.C、Create an Lmhost file on each computer.D、Create a Hosts file on each computer.
Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use NetBIOS names to connect to all shared resources as the network. You configure a TCP/IP address and a subnet mask on each new computer. Which 2 additional TCP/IP properties should you configure on each new computer？（）A、The bindings.B、A DNS address.C、A Gateway address.D、A WINS server address.E、A DHCP server address.
You are the desktop administrator for one of your company's branch offices. The network in the branch office consists of a single network segment, which contains a domain controller, a DHCP server, 10 Windows 2000 Server computers, and 50 Windows 2000 Professional computers. All servers and client computers are members of the company's Active Directory domain. You purchase 50 new client computers for the branch office. Each new client computer contains a built-in PXE-compliant network adapter. You install and configure RIS on one of the Windows 2000 Server computers that is on the network in the branch office. You create a Windows XP Professional RIS image on the Windows 2000 Server computer. You connect the new client computers to the network in the office, and you turn on each computer. Each computer displays a message stating that it cannot contact a PXE boot server. You verify that the RIS server is connected to the network. You need to ensure that the new client computers can connect to the RIS server and can begin installing Windows XP Professional. What should you do?（）A、Ask a domain administrator to authorize the RIS server. B、Grant the Everyone group Allow - Read NTFS permission on the RIS image.C、Install RIS on the domain controller. Copy the RIS image to the domain controller.D、Add a reservation for the RIS server to the DHCP server.
You are the administrator of Company.com’s Windows 2000 Network. Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. All computers are in the Company.com domain. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use host names to connect to shared resources on the network. You configure a TCP/IP address, a gateway address and a subnet mask on each new computer. You want to complete the configuration to allow the computers to communicate on the network. What should you do?（）A、Configure a HOSTS file.B、Configure a LMHOSTS file.C、Configure a WINS server database.D、Configure a DHCP server address.E、Configure at least one DNS address.
You have a computer that runs Windows XP Professional. Many users share the computer. You install a local print device on the computer. You need to ensure that only members of a local group named Engineering can print documents to the local print device. Which settings should you modify on the printer?（） A、portB、priorityC、securityD、share
You are the network administrator for The network consists of a single Active Directory domain named Servers run either Windows 2000 Server or Windows Server 2003. Client computers run either Windows 2000 Professional Service Pack 2 or Windows XP Professional. You need to implement a new software update infrastructure. You discover that security patches, critical updates, and service packs have never been installed on any client computer on the network. You install Software Update Services (SUS) on a Windows Server 2003 computer named Testking5. You must ensure that all client computers receive all Microsoft security patches, critical updates, and service packs. You want to achieve this goal as quickly as possible. Which three actions should you perform? （）(Each correct answer presents part of the solution. Choose three)A、Install the Automatic Updates client on all Windows 2000 Professional client computers.B、Install the Automatic Updates client on all Windows XP Professional client computers.C、Install SUS on a Windows 2000 Server computer.D、Modify the Windows Update settings of the Default Domain Controller organizational unit (OU) Group Policy object (GPO) to point client computers to http://testking5.E、Modify the Windows Update settings of the Default Domain Policy Group Policy object (GPO) to point client computers to http://testking5.F、Upgrade all Windows 2000 Professional client computers to Windows XP Professional.
You have a computer that runs Windows XP Professional. The computer is configured as a Simple Network Management Protocol (SNMP) agent and is monitored by an SNMP management server. You install Windows XP Professional Service Pack 2 (SP2) and Windows Defender on the computer. You discover that the SNMP management server can no longer collect SNMP data from the computer. You need to ensure that the SNMP management server can collect data from the Windows XP Professional computer. What should you do?（）A、Reinstall the SNMP.B、Perform a Windows Update.C、Uninstall Windows Defender. D、Create an exception in Windows Firewall.
Sandy works in Tron Electronics and uses a Windows 2000 Professional system to work on. Today she is visiting another department, and is using a Windows NT 4.0 system. She wants to print a document but is missing her printer. You want her to be able to print from any computer she logs in at. What can you do to insure that she has this ability?（）A、 Configure the server properties of printer system folder to connect to the shared printer. B、Install a print driver for the print device on the Windows NT workstation computer. C、Create a roaming user profile for Sandy D、Upgrade the Windows NT 4 computer to a Windows 2000 Professional computer and then import the file settings for Sandy's user account.
You are the network administrator for ExamSheet.net. You administer ExamSheet's Windows 2000 network. You want to update the device driver for the network adapter in your Windows 2000 Professional computer. You log on the computer by using the local Administrator account. You use Device Manager to verify that the network adapter is installed on your computer. You select the Driver tab and Update Driver option, and install a new driver from the network adapter manufacturer. You restart the computer. After displaying the Windows 2000 Professional startup screen, your computer displays aCkernel stop error message. You want to configure your computer to start successfully. Which two methods can you use to resolve the problem?（）A、Perform an emergency repair of the system from the Windows 2000 Professional CD-ROM by using the Emergency Repair Disk for the computer.B、Restart the computer. In the Recovery Console， use the Extract utility to reinstall the loopback driver from the Windows 2000 Professional CD-ROM.C、Restart the computer by using the last know good configuration.D、Restart the computer in safe mode and reinstall the original network adapter driver. E、Restart the computer and disable Plug and Play in the computer BIOS.
多选题You are the network administrator for The network consists of a single Active Directory domain named Servers run either Windows 2000 Server or Windows Server 2003. Client computers run either Windows 2000 Professional Service Pack 2 or Windows XP Professional. You need to implement a new software update infrastructure. You discover that security patches, critical updates, and service packs have never been installed on any client computer on the network. You install Software Update Services (SUS) on a Windows Server 2003 computer named Testking5. You must ensure that all client computers receive all Microsoft security patches, critical updates, and service packs. You want to achieve this goal as quickly as possible. Which three actions should you perform? （）(Each correct answer presents part of the solution. Choose three)AInstall the Automatic Updates client on all Windows 2000 Professional client computers.BInstall the Automatic Updates client on all Windows XP Professional client computers.CInstall SUS on a Windows 2000 Server computer.DModify the Windows Update settings of the Default Domain Controller organizational unit (OU) Group Policy object (GPO) to point client computers to http://testking5.EModify the Windows Update settings of the Default Domain Policy Group Policy object (GPO) to point client computers to http://testking5.FUpgrade all Windows 2000 Professional client computers to Windows XP Professional.
多选题Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use NetBIOS names to connect to all shared resources as the network. You configure a TCP/IP address and a subnet mask on each new computer. Which 2 additional TCP/IP properties should you configure on each new computer？（）AThe bindings.BA DNS address.CA Gateway address.DA WINS server address.EA DHCP server address.
单选题You have a computer that runs Windows XP Professional. The computer is a member of an Active Directory domain. A server administrator installs and shares a new printer on a server that runs Windows Server 2003. You need to configure the computer to print to the new printer. What should you do?（）AFrom the computer, install a local printer.BFrom the computer, install a network printer. CFrom the Active Directory domain, add the computer account for the Windows XP Professional computer to the Print Operators group. DFrom the Windows Server 2003 server, add the computer account for the Windows XP Professional computer to the Print Operators group.
单选题You are the network administrator for ExamSheet. Your network consists of one Windows NT Server 4.0 domain and 35 Windows 2000 Professional computers. The network consists of five interconnected TCP/IP subnets. All of the computers use TCP/IP as the only network protocol. You are adding 15 Windows 2000 Professional computers to the network. You configure each of the new computers to use DHCP. The computers can communicate with each other but are unable to communicate outside their own subnet. You run the ipconfig command to examine the IP address on one of the new computers. The IP address is 169.254.101.72 You want to enable the Windows 2000 Professional computers to communicate outside their own subnet. What should you do？（）AInstall a DHCP server.BInstall a WINS server. Configure each computer to use WINS.CCreate an Lmhost file on each computer.DCreate a Hosts file on each computer.
单选题You are the desktop administrator for one of your company's branch offices. The network in the branch office consists of a single network segment, which contains a domain controller, a DHCP server, 10 Windows 2000 Server computers, and 50 Windows 2000 Professional computers. All servers and client computers are members of the company's Active Directory domain. You purchase 50 new client computers for the branch office. Each new client computer contains a built-in PXE-compliant network adapter. You install and configure RIS on one of the Windows 2000 Server computers that is on the network in the branch office. You create a Windows XP Professional RIS image on the Windows 2000 Server computer. You connect the new client computers to the network in the office, and you turn on each computer. Each computer displays a message stating that it cannot contact a PXE boot server. You verify that the RIS server is connected to the network. You need to ensure that the new client computers can connect to the RIS server and can begin installing Windows XP Professional. What should you do?（）AAsk a domain administrator to authorize the RIS server. BGrant the Everyone group Allow - Read NTFS permission on the RIS image.CInstall RIS on the domain controller. Copy the RIS image to the domain controller.DAdd a reservation for the RIS server to the DHCP server.