You want to upgrade a Windows NT Server 4.0 computer to Windows 2000 Server. The system partition uses the FAT file system.You start the Setup program by starting the computer from the Windows 2000 Server CD-ROM.However, you receive the following error message, "You chose to install Windows 2000 on a partition that contains another operating system. Installing Windows 2000 on this partition might cause the operating system to function improperly".You are unable to perform. the upgrade. What should you do to resolve the problem?A．Convert the system partition to NTFS.B．Disable Advanced Configuration and Power Interface (ACPI) support for the computer.C．Restart the computer, and then run Winnt32.exe from the Windows NT Server 4.0 environment.D．Remove the Windows 2000 Server CD-ROM and restart the computer by using the setup floppy disks.
You want to upgrade a Windows NT Server 4.0 computer to Windows 2000 Server. The system partition uses the FAT file system.
You start the Setup program by starting the computer from the Windows 2000 Server CD-ROM.
However, you receive the following error message, "You chose to install Windows 2000 on a partition that contains another operating system. Installing Windows 2000 on this partition might cause the operating system to function improperly".
You are unable to perform. the upgrade. What should you do to resolve the problem?
A．Convert the system partition to NTFS.
B．Disable Advanced Configuration and Power Interface (ACPI) support for the computer.
C．Restart the computer, and then run Winnt32.exe from the Windows NT Server 4.0 environment.
D．Remove the Windows 2000 Server CD-ROM and restart the computer by using the setup floppy disks.
相关考题：
The network consists of a single domain named Ezonexam.com that includes 20 Windows NT workstation 4.0 client computers. All other client computers are Windows 2000 Professional computers. You install Terminal Services on one of the Windows Server computers and Terminal Services Client on the 20 Windows NT Workstation 4.0 client computers. You create a system policy on the server that is configured as the terminal server. This system policy denies access to Network Neighborhood. You find that the users of the terminal server can still browse the network when they open My Network Places from Windows 2000 Professional computer or when they open Network Neighborhood from Windows NT Workstation 4.0 computers.You want to prevent all users from browsing the network.What should you do? (Each correct answer presents a complete solution. Choose two.)A．Create a Windows Group Policy that denies user access to My Network Places.B．Copy the Windows NT policy file to the 20 Windows NT Workstation 4.0 computers.C．Create a Windows NT 4.0 default user policy on the Windows 2000 Server computer that is configured as the PDC emulator.D．Modify the Windows NT policy template file so that you can restrict access to both My Network Places and Network Neighborhood. Save the policy file on the terminal server.E．Configure the terminal server to use Application server mode. Select the Permissions compatible with Terminal Server 4.0 Users option.
You are the administrator of a Windows NT Server 4.0 computer names Ezonexam1.Ezonexam1 is a backup domain controller in Ezonexam.com's Windows 2000 Active Directory domain. Ezonexam1 contains five hard disks. Disks 0 and 1 are configured as a Windows NT 4.0 mirror set and contain the operating system files. There are 300 MB of disk space remaining on the Windows NT 4.0 mirror set. Disk 2, 3, and 4 are configured as a Windows NT 4.0 stripe set with parity and contain employee data files. The Windows NT 4.0 stripe set with parity has a maximum capacity of 140 GB and currently has 15 GB free. Ezonexam1 runs an application that is used by all of Ezonexam.com's employees.A new version of the application is available. The new version requires Windows 2000 Server. The application will not run on a domain controller.You need to install the new application on Ezonexam1 as quickly as possible.What should you do first?A．Install Windows 2000 Server on Ezonexam1. Configure Ezonexam1 to use a dual boot configuration that includes Windows NT Server 4.0 and Windows 2000 Server.B．On a second Windows 2000 Server computer, run the sysprep utility to create a cloned server image. Use this image to upgrade Ezonexam1.C．Upgrade Ezonexam1 to be a Windows 2000 member server. After the upgrade, run the dcpromo utility on Ezonexam1.D．Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade, select the option to make Ezonexam1 a member server.
You are the network administrator for Ezonexam. The network includes a Microsoft Windows NT Server 4.0 member server computer that has a non-Plug and Play ISA network adapter.You want to upgrade this computer to Microsoft Windows 2000 Server. You also want to ensure that you maintain the current device configuration during the upgrade.What should you do? (Each correct answer presents part of the solution. Choose two)A. Install the latest driver for the network adapter.B. Disable the network adapter.C. Start the upgrade process by using Winnt32.exeD. Start the upgrade process by booting from the Windows 2000 Server compact disc.E. Configure BIOS to reserve the IRQ currently in use by the network adapter.F. Press F6 at the beginning of the text mode setup to specify an additional driver.
You are the administrator of a Windows 2000 Server network that runs in mixed mode. You install a new Windows 2000 Server computer. You create and share a new HP LaserJet 4L printer.Your Windows 2000 Professional client computer can print to the new printer successfully. However, when users try to connect to the printer from Windows NT Workstation 4.0 client computers, they receive the dialog box shown in the exhibit.You want the printer driver to install automatically on the Windows NT Workstation computers. What should you do?A．Copy the Windows NT 4.0 printer drivers to the Netlogon shared folders on all Windows NT Server 4.0 computers still configured as BDCs.B．Copy the Windows NT 4.0 printer drivers to the Netlogon shared folders on the PDC emulator.C．Change the sharing options on the printer to install additional drivers for Windows NT 4.0 or Windows 2000.D．Copy the Windows NT 4.0 printer drivers to the Winnt\System32\printers\drivers folder on the Windows 2000 print Server.
You are the administrator of a network that consists of a single Windows NT 4.0 domain. The network contains five Windows NT Server domain controllers and 1,000 Windows NT Workstation client computers.You want to install Windows 2000 Server on a new computer. You want the new computer to act as domain controller in the existing domain.What should you do?A．On the new computer, install Windows NT Server 4.0 and designate the computer as a BDC in the existing domain. Promote the computer to the PDC of the domain. Upgrade the computer to Windows 2000 Server.B．On the new computer, install Windows NT Server 4.0 and designate the computer as a PDC in a new domain that has the same NetBIOS name as the existing Windows NT domain. Upgrade the computer to Windows 2000 Server. Use the Active Directory sites and services to force synchronization of the domain controllers.C．Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory, specifying the same NetBIOS name for the Windows 2000 domain as the existing Windows NT domain. Restart the Windows NT PDC on the network and demote it to a BDC.D．Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory as a replica in the existing Windows NT domain. Promote the new computer to the PDC of the domain. Restart Windows NT PDC on the network and demote it to a BDC.
You are installing Windows 2000 Server on a new computer that has a hardware-based RAID array, a floppy disk drive, and a CD-ROM drive. The disk controller for the RAID array is not included on the current Hardware Compatibility List (HCL). You run Windows 2000 Setup by starting the computer from the Windows 2000 Server CD-ROM.When the computer restarts at the end of the text mode portion of Windows 2000 Setup, you receive the following STOP error: "INACCESSABLE_BOOT_DEVICE ".Which two actions should you take to eliminate the STOP error? (Choose Two)A. Modify the Boot.ini file.B. Restart Windows 2000 Setup by using the Windows 2000 Server CD-ROM.C. Select Safe Mode from the Windows 2000 boot menu.D. Remove the Windows 2000 Server CD-ROM from the CD-ROM drive.E. Install a driver for the RAID controller form. a floppy disk.F. Use Device Manager to update the driver for the RAID controller.
You plan to install Windows 2000 Server on 10 new computers. These servers will provide file and print services in branch offices of Ezonexam.com. The company wants each branch office to purchase its own copy of Windows 2000 Server, and the installation in each branch office should use the serial number associated with the branch office's own copy.You want to install, configure, and test Windows 2000 Server on these computers at the main office before shipping the computers to the branch offices. You want users in the branch office to enter the computer names and serial numbers when they receive the computers.What should you do?A．Install Windows 2000 Server on the computers by using an unattend.txt file, and then use the registry editor to remove the computer name and license details.B．Start the installation process from an MS-DOS boot disk. Install Windows 2000 Server on the computers from an existing server by running the Winnt command with the PreInst switch.C．Install Windows 2000 Server on the computers, and then use Setup Manager to create a sysprep.inf file for sysprep.exe. Place the sysprep.inf file on the computers and run the sysprep-nosidgen command.D．Create an unattend.txt file by using Setup Manager. Include the following line in the unattend.txt file. emPrenistall=YES. Use this file to perform. the installation.
You are the administrator of a Windows 2000 Server network. On each server, you format a separate system partition and a separate boot partition as NTFS.Several months later, you shut down one of the servers for the maintenance. When you try to restart the server, you receive the following error message "NTLDR is missing. Press any key to restart".You want to install a new NTLDR file on the server, but you do not want to lose any settings you made since the original installation. What should you do?A．Start the computer by using the Windows 2000 Server CD-ROM and choose to repair the installation. Select the Recovery Console and copy the NTLDR file on the CD-ROM to the root of the system volume.B．Start the computer by using the Windows 2000 Server CD-ROM and choose to reinstall. When installation is complete, copy the NTLDR file to the root of the boot volume.C．Start the computer by using a Windows 2000 bootable floppy disk. From the command prompt, run the sfc/scanboot command.D．Start the computer by using a Windows 2000 bootable floppy disk. Run the File Signature Verification utility.
You are the administrator of a Windows NT Server 4.0 computer named Ezonexam1.Ezonexam1 is a backup domain controller and a member of Ezonexam.com's Windows 2000 Active Directory forest. The forest consists of three Windows 2000 domains. Ezonexam1 is the only remaining Windows NT Server 4.0. A new version of the application that runs on Windows 2000 Server has been developed that requires the use of Universal groups. The application will not run on a domain controller.You need to upgrade Ezonexam1 to Windows 2000 Server and prepare for the installation of the new version of the application on Ezonexam1.What should you do?(Each correct answer presents part of the solution. Choose two.)A．Install Windows 2000 Server on Ezonexam1. Configure Ezonexam1 to use a dual boot configuration that includes Windows NT Server 4.0 and Windows 2000 Server. Install the new application on the Windows NT Server 4.0B．Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade select option to make Ezonexam1 a member server.C．Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade select the option to make Ezonexam1 a domain controller. After the upgrade, demote the domain controller.D．Make any user accounts on Ezonexam1 members of Domain Global groups.E．Convert the Windows 2000 domains to native mode.
You are the administrator of a network that includes Windows NT Server 4.0 computers, Windows NT Workstation 4.0 computers, and UNIX computers. The network consists of a single Windows NT domain.You are upgrading a Windows NT Server computer named Server1 to Windows 2000 Server. Server1 is a BDC in the domain. The existing DNS server is a UNIX computer that supports SRV (service) records and is configured to accept dynamic updates. The existing WINS server is another Windows NT Server computer.You want to configure Server1 as a domain controller in a New Active Directory forest. You want the existing Windows NT domain accounts to be upgraded to Active Directory. You plan to upgrade the other domain controllers in the domain to Windows 2000 after the upgrade of Server1 is complete.You want to perform. the upgrade of Server1 with the least possible impact on other computers on the network. What should you do?A．Promote Server1 to the PDC of the domain. Run Windows 2000 Setup on Server1.B．Run Windows 2000 Setup on Server1. At the end of Setup, configure Server1 as a DNS server and a WINS server.C．Add a static mapping for Server1 on the WINS server. On the DNS server, create an SRV record for the LDAP service on Server1. Run Windows 2000 Setup on Server1.D．Install the Microsoft DNS service on an existing Windows NT server. Apply Windows NT 4.0 service pack 4 or later to the server. Run Windows 2000 Setup on Server1.
You are the administrator of a Windows NT 4.0 Terminal Server Edition computer. The server has one hard disk, which is divided into two partitions The first partition contains the Windows NT 4.0 system files and is formatted as FAT. The second partition contains application data and user data. This second partition is formatted as NTFS. The server currently has Service Pack 3 installed.You need to upgrade the server to Windows 2000 Server. You want to ensure that no application data or user data is lost during the upgrade. You also want to perform. the minimum number of steps necessary to complete the upgrade.What should you do? (Choose all that apply)A．Convert the system partition to NTFS.B．Install service pack4 or later on the server.C．Use a Windows 2000 Server CD to start the server. In setup, select the option to upgrade.D．Replace the Terminal Server installation with a standard Windows NT server 4.0 installation.
Your network includes Windows 98 computers and Windows 2000 Server computers. You are adding a new computer to the network, and you plan to install Windows 2000 Server on the new computer. The computer has one 20-GB hard disk with no partitions defined.The Windows 2000 Server CD-ROM is unavailable. You want install Windows 2000 Server from source files that are located on a server on the network. You also want the entire hard disk of the new computer to be used for the system partition.What should you do?A．On another Windows 2000 computer, use Makebt32.exe to create installation startup disks. Start the new computer by using the first disk.B．On another Windows 2000 computer, format a floppy disk. Copy NTLDR, Boot.ini, Ntdetect.com, Ntbootdd.sys to this disk. Start the new computer by using the disk.C．Start the new computer by using a Windows 98 network boot disk. Connect to the network server. Run Dsclient.exe. Create and format a 20-GB FAT32 partition.D．Start the new computer by using a Windows 98 network boot disk. Create and format a single FAT32 partition. Connect to the network server. Run Winnt.exe.E．Start the computer by using a Windows 98 network boot disk. Create and format a single FAT32 partition. Start the new computer by using a Windows 2000 Emergency Repair Disk.
Your Windows 2000 Server computer has a 10-GB hard disk with two partitions: Drive C and drive D. Windows 2000 Server is installed on Drive D. Both partitions are formatted as NTFS. Your office experiences a power failure that causes your Windows 2000 Server computer to restart.When the computer is restarting, you receive the following error message "NTLDR is missing. Press any key to restart".What should you do?A．Start the computer by using Windows 2000 Server computer CD-ROM and choose to repair the installation. Select the Recovery Console and copy the NTLDR file on the CD-ROM to the root of the system partition.B．Start the computer in debugging mode. Copy the NTLDR file on the CD-ROM to the root of the system partition.C．Start the computer by using the Windows 2000 bootable floppy disk. From a command prompt, run the sfc/scanboot command.D．Start the computer by using a Windows 2000 bootable floppy disk. Run the File Signature Verification utility.
You are preparing to install Windows 2000 Server on a new computer. The computer is connected to a network that includes Windows 98 computers and Windows 2000 Server computers.You want to install Windows 2000 Server from source files that are located on a server on the network.What should you do?A．Start the new computer by using a Windows 98 network boot disk. Connect to the network server. Run Winnt32.exe.B．Start the new computer by using Windows 98 network boot disk. Connect to the network server. Run Winnt.exe.C．On a Windows 2000 Server computer, use Makebt32.exe to create installation startup disk. Start the new computer by using the first disk.D．On a Windows 2000 computer, format a floppy disk. Copy NTLDR, boot.ini, Ntdetect.com, Ntbootdd.sys to this disk. Start the new computer by using the disk.
You are installing Windows 2000 Server on a new computer that has a single 10-GB SCSI disk. The disk controller is not included on the current Hardware Compatibility List (HCL). You start the computer by using the Windows 2000 Server CD-ROM.When the computer restarts at the end of the text mode portion of Windows 2000 setup, you receive the following STOP error: "INACCESSIBLE_BOOT_DEVICE."Which two actions should you take to eliminate the STOP error? (Choose Two)A．Restart the Windows 2000 Setup by using the Windows 2000 Server CD-ROM.B．Select Safe Mode from the Windows 2000 boot menu.C．Remove the Windows 2000 Server CD-ROM from the CD-ROM drive.D．Install a driver for the SCSI controller from a floppy disk.E．Use Device Manager to update the driver for the SCSI controller.
You are the network administrator for Ezonexam.The network includes a Windows 2000 Server computer that contains a single 36-GB hard disk. The drive is configured as a basic disk and has two partitions. Partition C is 4 GB in size and contains the operating system files. Partition D is 32 GB in size and contains user data that is updated frequently.Both partitions are formatted as NTFS. Both partitions are backed up to a tape every evening at 11:00 P.M.You have a current Emergency Repair Disk (ERD) for the computer, and Recovery Console is installed on the computer.One day at2:00 P.M., the server fails. You attempt to restart the computer, but you receive the following error message: "Boot disk or operating system not found." You use Recovery Console to discover that the files on partition C are corrupted.You want to recover the server from the failure as quickly as possible. You also want to recover as much user data as possible.What should you do?A．Start the computer by using a Windows 2000 Server compact disc. Select the Repair option in Setup.B．Install a second hard disk in the computer. Install Windows 2000 Server on the new hard disk. Re-create the shared folders on the first hard disk.C．Use a Windows 2000 Server boot floppy disk to start the computer. Replace the corrupted files on partition C by copying them from the Emergency Repair Disk.D．Boot to the Recovery Console. Copy any files that have changed since 11:00 P.M. the previous evening to a second server. Use the most recent tape backup to restore the remaining user data to the second server.
You are the network administrator for Ezonexam.com.You need to upgrade a computer from Windows NT Server 4.0 to Windows 2000 server. The server has dual processors, 2 GB of RAM, a RAID controller with five SCSI hard disks in an array, and a generic 10/100-MB network adapter. You begin the installation of the Windows 2000 Server operating system.During the text portion of the installation, you receive the following error message:"Stop 0x00000078 Inaccessible_boot_device."You want to successfully upgrade the computer.What should you do? (Each answer presents part of the solution. Choose two)A．Start the computer by using a DOS disk and run FDISK.B．Update the firmware on the RAID controller.C．Restart the installation. During the text-mode setup-mode setup, press F6.D．Restart the installation. During the text-mode setup, create a new partition.E．Insert a floppy disk containing the OEM SCSI driver and specify the additional driver.
Sandy works in Tron Electronics and uses a Windows 2000 Professional system to work on. Today she is visiting another department, and is using a Windows NT 4.0 system. She wants to print a document but is missing her printer. You want her to be able to print from her printer. Sandy does not want the printer facility from any computer where she logs in. What should you do to insure that she has this ability?（）A、Configure the server properties of printer system folder to connect to the shared printer. B、Install a print driver for the print device on the Windows NT workstation computer. C、Create a roaming user profile for Sandy D、Upgrade the Windows NT 4 computer to a Windows 2000 Professional computer and then import the file settings for Sandy's user account.
Windows NT 4.0 is currently on the system you are using, and you want to install Windows 2000 Professional. Windows NT 4.0 is currently on an NFTS partition. For some reason you have decided that you are not going to upgrade, but rather, you are going to run this in a dual boot fashion. What do you need to do? （）A、Can’t be done.B、You need to put Windows 2000 on a separate partition from Windows NT 4.0C、You need to put Windows 2000 on the same partition as Windows NT 4.0.D、You need to upgrade Windows NT 4.0 to SP4.
You are the administrator of Company's network. You have configured your computer with a dual-boot configuration. The computer uses both Windows 2000 Professional and Windows NT Workstation 4.0 with the latest service pack. Your computer is equipped with three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You wish to use Disk 2 to store your project files on. You partition Disk 2 and configure it as a dynamic volume in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files. You want to be able to access your project files when using either of the operating systems. What should you do?（）A、Format the dynamic volume as a FAT32 partition.B、Format the dynamic volume as a FAT16 partition.C、Configure Disk 2 to use Encrypting File System （EFS）.D、Configure Disk 2 as a basic volume and format the volume as NTFS.E、Configure Disk 2 as a basic volume and format the volume as FAT32.
Sandy works in Tron Electronics and uses a Windows 2000 Professional system to work on. Today she is visiting another department, and is using a Windows NT 4.0 system. She wants to print a document but is missing her printer. You want her to be able to print from any computer she logs in at. What can you do to insure that she has this ability?（）A、 Configure the server properties of printer system folder to connect to the shared printer. B、Install a print driver for the print device on the Windows NT workstation computer. C、Create a roaming user profile for Sandy D、Upgrade the Windows NT 4 computer to a Windows 2000 Professional computer and then import the file settings for Sandy's user account.
You are the administrator of a Windows 2000 network. You are configuring eight computers to use both Windows NT Workstation 4.0 and Windows 2000 Professional. Each computer has a 10 GB hard disk. You configure the hard disk on each computer to have two 5 GB partitions. Windows NT Workstation is installed on drive D. Windows 2000 Professional is installed on drive C. In Windows 2000 Professional, you configure a disk quota on drive C to prevent users from saving work files on the disk. You restart the computers and load Windows NT Workstation 4.0. You notice that users can still save files to drive C. You want to prevent users from saving files to drive C in either operating system. You also want to ensure that users can access both drives while using either operating system. What should you do on each computer? （）A、Reinstall Windows NT Workstation 4.0 after configuring the disk quotasB、Use Windows 2000 Professional to configure drive C as a dynamic partitionC、Use Windows 2000 Professional to enable Encrypting File System （EFS） on drive CD、Use Windows NT Workstation 4.0 to configure NTFS permissions on drive C to deny the usersWrite permission
You are the administrator of Company.com’s Windows 2000 network. Your computer is configured to use both Windows 2000 Professional and Windows NT Workstation 4.0 Service Pack 3. Your computer has three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You want to store your project files on Disk2. You configure Disk2 as a basic volume and format the volume as NTFS in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files. You want to be able to access your project files when using either operating systems. What should you do?（）A、Upgrade Windows NT Workstation 4.0 to Service Pack 4 or later.B、Configure Disk 2 as a dynamic volume then format as an NTFS partition.C、Configure Disk 2 to use Encrypting File System （EFS）.D、Configure Disk 2 as a basic volume and forma the volume as FAT32.
You have updated the modem driver on your Windows 2000 Professional computer. You restart your computer. Immediately after you log on, you receive a stop error. You need to start Windows 2000. What must you do? （）A、Restart the computer in Safe Mode. Uninstall the modem driver.B、Restart the computer by using the last known good configuration.C、Restart the computer in Recovery Console. Replace the new Modem.inf file with the old modem.inf file.D、Start the computer from the Windows 2000 startup floppy disks. Repair the registry.E、Start the computer from the Windows 2000 startup floppy disks. Repair the system files.
单选题Windows NT 4.0 is currently on the system you are using, and you want to install Windows 2000 Professional. Windows NT 4.0 is currently on an NFTS partition. For some reason you have decided that you are not going to upgrade, but rather, you are going to run this in a dual boot fashion. What do you need to do? （）ACan’t be done.BYou need to put Windows 2000 on a separate partition from Windows NT 4.0CYou need to put Windows 2000 on the same partition as Windows NT 4.0. DYou need to upgrade Windows NT 4.0 to SP4.
单选题Sandy works in Tron Electronics and uses a Windows 2000 Professional system to work on. Today she is visiting another department, and is using a Windows NT 4.0 system. She wants to print a document but is missing her printer. You want her to be able to print from any computer she logs in at. What can you do to insure that she has this ability?（）A Configure the server properties of printer system folder to connect to the shared printer. BInstall a print driver for the print device on the Windows NT workstation computer. CCreate a roaming user profile for Sandy DUpgrade the Windows NT 4 computer to a Windows 2000 Professional computer and then import the file settings for Sandy's user account.
单选题Sandy works in Tron Electronics and uses a Windows 2000 Professional system to work on. Today she is visiting another department, and is using a Windows NT 4.0 system. She wants to print a document but is missing her printer. You want her to be able to print from her printer. Sandy does not want the printer facility from any computer where she logs in. What should you do to insure that she has this ability?（）AConfigure the server properties of printer system folder to connect to the shared printer. BInstall a print driver for the print device on the Windows NT workstation computer. CCreate a roaming user profile for Sandy DUpgrade the Windows NT 4 computer to a Windows 2000 Professional computer and then import the file settings for Sandy's user account.