Your Windows 2000 Server computer has a 10-GB hard disk with two partitions: Drive C and drive D. Windows 2000 Server is installed on Drive D. Both partitions are formatted as NTFS. Your office experiences a power failure that causes your Windows 2000 Server computer to restart.When the computer is restarting, you receive the following error message "NTLDR is missing. Press any key to restart".What should you do?A．Start the computer by using Windows 2000 Server computer CD-ROM and choose to repair the installation. Select the Recovery Console and copy the NTLDR file on the CD-ROM to the root of the system partition.B．Start the computer in debugging mode. Copy the NTLDR file on the CD-ROM to the root of the system partition.C．Start the computer by using the Windows 2000 bootable floppy disk. From a command prompt, run the sfc/scanboot command.D．Start the computer by using a Windows 2000 bootable floppy disk. Run the File Signature Verification utility.
Your Windows 2000 Server computer has a 10-GB hard disk with two partitions: Drive C and drive D. Windows 2000 Server is installed on Drive D. Both partitions are formatted as NTFS. Your office experiences a power failure that causes your Windows 2000 Server computer to restart.
When the computer is restarting, you receive the following error message "NTLDR is missing. Press any key to restart".
What should you do?
A．Start the computer by using Windows 2000 Server computer CD-ROM and choose to repair the installation. Select the Recovery Console and copy the NTLDR file on the CD-ROM to the root of the system partition.
B．Start the computer in debugging mode. Copy the NTLDR file on the CD-ROM to the root of the system partition.
C．Start the computer by using the Windows 2000 bootable floppy disk. From a command prompt, run the sfc/scanboot command.
D．Start the computer by using a Windows 2000 bootable floppy disk. Run the File Signature Verification utility.
相关考题：
You are configuring 5 computers to use both Windows NT workstation 4.0 and Windows 2000 Professional. Each computer has an 8GB hard disk. You configure that hard disk on each computer to have two 4GB partitions. Windows NT workstation is installed on drive C. Windows 2000 Professional is installed on drive D. In Windows 2000 Professional you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart the computer and load Windows NT workstation.You notice that users can still save files to drive D.You want to prevent users from saving files to drive D in either operating system. You also want to ensure that users can access both drives using either operating system. What should you do on each computer?A．Use Windows 2000 Professional to configure drive D as a dynamic volume.B．Use Windows 2000 Professional to enable Encrypting File System (EFS) on drive D.C．Use Windows NT workstation to configure NTFS permission on drive D to deny the users write permission.D．Reinstall Windows NT workstation after configuring the disk code task.
You are installing Windows 2000 Server on a new computer that has a hardware-based RAID array, a floppy disk drive, and a CD-ROM drive. The disk controller for the RAID array is not included on the current Hardware Compatibility List (HCL). You run Windows 2000 Setup by starting the computer from the Windows 2000 Server CD-ROM.When the computer restarts at the end of the text mode portion of Windows 2000 Setup, you receive the following STOP error: "INACCESSABLE_BOOT_DEVICE ".Which two actions should you take to eliminate the STOP error? (Choose Two)A. Modify the Boot.ini file.B. Restart Windows 2000 Setup by using the Windows 2000 Server CD-ROM.C. Select Safe Mode from the Windows 2000 boot menu.D. Remove the Windows 2000 Server CD-ROM from the CD-ROM drive.E. Install a driver for the RAID controller form. a floppy disk.F. Use Device Manager to update the driver for the RAID controller.
Your Windows 2000 Server computer named EzonexamSrv contains a single 18-GB hard disk. The drive is configured as a basic disk and has two partitions. Partition C is 2 GB in size and contains the operating system files. Partition D is 16 GB in size and contains user data that is updated frequently.Both partitions are formatted as NTFS. Both partitions are backed up to a tape every evening at 10:00 P.M.You have a current Emergency Repair Disk (ERD) for EzonexamSrv, and the Recovery Console is installed on the computer.One day at4:00 P.M., the server fails. You attempt to restart EzonexamSrv, but you receive the following error message:"Boot disk or operating system not found".You use Recovery Console to discover that the files on partition C are corrupted.You need to recover EzonexamSrv from the failure as quickly as possible. You also must recover as much user data as possible.What should you do?A．Use the ERD to start the computer. Replace the corrupted files on partition C by copying them from a Windows 2000 Server CD-ROM.B．Boot the Recovery Console. Copy any files that have changed since 10:00 P.M. the previous evening to a second server. Use the most recent tape backup to restore the remaining user data to the second server.C．Start the computer by using a Windows 2000 Server CD-ROM. Select the Repair option in Setup.D．Install a second hard disk in the computer. Install Windows 2000 Server on the new hard disk. Re-create the shared folders on the first hard disk.
A technician has installed a secondary hard drive for a computer. However, the hard drive is not appearing under My Computer. The disk is receiving power, and appeared on the POST when Windows started.Which of the following Windows utilities would help configure the new hard disk?（）A. Disk ManagementB. Services and ApplicationsC. Removable StorageD. Device Manager
You are the administrator of a Windows NT 4.0 Terminal Server Edition computer. The server has one hard disk, which is divided into two partitions The first partition contains the Windows NT 4.0 system files and is formatted as FAT. The second partition contains application data and user data. This second partition is formatted as NTFS. The server currently has Service Pack 3 installed.You need to upgrade the server to Windows 2000 Server. You want to ensure that no application data or user data is lost during the upgrade. You also want to perform. the minimum number of steps necessary to complete the upgrade.What should you do? (Choose all that apply)A．Convert the system partition to NTFS.B．Install service pack4 or later on the server.C．Use a Windows 2000 Server CD to start the server. In setup, select the option to upgrade.D．Replace the Terminal Server installation with a standard Windows NT server 4.0 installation.
Your network includes Windows 98 computers and Windows 2000 Server computers. You are adding a new computer to the network, and you plan to install Windows 2000 Server on the new computer. The computer has one 20-GB hard disk with no partitions defined.The Windows 2000 Server CD-ROM is unavailable. You want install Windows 2000 Server from source files that are located on a server on the network. You also want the entire hard disk of the new computer to be used for the system partition.What should you do?A．On another Windows 2000 computer, use Makebt32.exe to create installation startup disks. Start the new computer by using the first disk.B．On another Windows 2000 computer, format a floppy disk. Copy NTLDR, Boot.ini, Ntdetect.com, Ntbootdd.sys to this disk. Start the new computer by using the disk.C．Start the new computer by using a Windows 98 network boot disk. Connect to the network server. Run Dsclient.exe. Create and format a 20-GB FAT32 partition.D．Start the new computer by using a Windows 98 network boot disk. Create and format a single FAT32 partition. Connect to the network server. Run Winnt.exe.E．Start the computer by using a Windows 98 network boot disk. Create and format a single FAT32 partition. Start the new computer by using a Windows 2000 Emergency Repair Disk.
You are installing Windows 2000 Server on a new computer that has a single 10-GB SCSI disk. The disk controller is not included on the current Hardware Compatibility List (HCL). You start the computer by using the Windows 2000 Server CD-ROM.When the computer restarts at the end of the text mode portion of Windows 2000 setup, you receive the following STOP error: "INACCESSIBLE_BOOT_DEVICE."Which two actions should you take to eliminate the STOP error? (Choose Two)A．Restart the Windows 2000 Setup by using the Windows 2000 Server CD-ROM.B．Select Safe Mode from the Windows 2000 boot menu.C．Remove the Windows 2000 Server CD-ROM from the CD-ROM drive.D．Install a driver for the SCSI controller from a floppy disk.E．Use Device Manager to update the driver for the SCSI controller.
You are configuring five computers for Windows NT Workstation 4.0 and Windows 2000 Professional.Each computer has an 8 GB hard disk.You configure the hard disk on each computer to have two 4 GB partitions. Windows NT Workstation is installed on drive C and Windows 2000 Professional on drive D.In Windows 2000 Professional, you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart your computer and load Windows NT Workstation. You notice that users can save files to drive D.You want to prevent users from saving the files to drive D in either operating system. You also want to ensure that users can access both drives while using either operating system.What should you do?A．Use Windows 2000 Professional to configure drive D as a dynamic partition.B．Use Windows 2000 Professional to enable encrypting file system on drive D.C．Use Windows NT workstation to configure NTFS permissions on drive D to deny the users write permission.D．Reinstall Windows NT Workstation after configuring disk quotas.
You are the network administrator for Ezonexam.The network includes a Windows 2000 Server computer that contains a single 36-GB hard disk. The drive is configured as a basic disk and has two partitions. Partition C is 4 GB in size and contains the operating system files. Partition D is 32 GB in size and contains user data that is updated frequently.Both partitions are formatted as NTFS. Both partitions are backed up to a tape every evening at 11:00 P.M.You have a current Emergency Repair Disk (ERD) for the computer, and Recovery Console is installed on the computer.One day at2:00 P.M., the server fails. You attempt to restart the computer, but you receive the following error message: "Boot disk or operating system not found." You use Recovery Console to discover that the files on partition C are corrupted.You want to recover the server from the failure as quickly as possible. You also want to recover as much user data as possible.What should you do?A．Start the computer by using a Windows 2000 Server compact disc. Select the Repair option in Setup.B．Install a second hard disk in the computer. Install Windows 2000 Server on the new hard disk. Re-create the shared folders on the first hard disk.C．Use a Windows 2000 Server boot floppy disk to start the computer. Replace the corrupted files on partition C by copying them from the Emergency Repair Disk.D．Boot to the Recovery Console. Copy any files that have changed since 11:00 P.M. the previous evening to a second server. Use the most recent tape backup to restore the remaining user data to the second server.
You configure the hard disk on each computer to have two 4-GB partitions. Windows NT Workstation is installed on driver C. Windows 2000 Professional is installed on drive D. In Windows 2000 Professional, you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart the computers and load Windows NT Workstation. You notice that users can still save files to drive D. You want t prevent users from saving files to drive D in either operating system. You also want to ensure that users can access both drives while using either operating system. What should you do on each computer?（）A、Use Windows 2000 Professional to configure drive D as a dynamic partitionB、Use Windows 2000 Professional to enable Encrypting File System （EFS） on drive DC、Use Windows NT Workstation to configure NTFS permissions on drive D to deny the users write permissionD、Reinstall Windows NT Workstation after configuring the disk quotas
A Windows 2003 Server is no longer able to access its internal SCSI drive. The cables areconnected， the drive has power， and the drive shows up in Device Manager； however， the My Computerwindow does not show the drive that was previously working and formatted with NTFS. Which of the following would be the FIRST step in regaining access to the drive？ （）A、 Reformat the NTFS partition.B、 Recreate the partition that was deleted.C、 Rewrite the MBR.D、 Run a check disk on the drive.
A technician has installed a secondary hard drive for a computer. However, the hard drive is not appearing under My Computer. The disk is receiving power, and appeared on the POST when Windows started. Which of the following Windows utilities would help configure the new hard disk?（）A、Disk ManagementB、Services and ApplicationsC、Removable StorageD、Device Manager
You are a network administrator for ExamSheet.net’s Windows 2000 network. Your computer has Windows 2000 Professional installed. Your office has a power utage while you are running the Windows 2000 disk defragmenter. When you restart your computer， you receive the following error message： "Bad or missing operating system". You want your computer to start properly. You want to do this with least amount of administrative effort. What should you do？（）A、Reinstall the operating systemB、Start the computer by using the Windows 2000 Professional CD-ROM.C、Use the Recovery Console to repair the Master Boot Record.D、Use the Emergency Repair Disk to repair the Master Boot Record.
Your computer has Windows 2000 Professional installed. Your office has a power outrage while you were running the disk defragmenter utility on your computer. When you start the computer again， you receive the following message： "Bad or missing OS". What should you do？（）A、Start the computer in safe mode and reformat the hard disk.B、Start the computer in the debug mode and reformat the hard disk.C、Start the computer using the ERD and repair the Master Boot Record.D、Start the computer by using the Windows 2000 Professional CD-Rom. Then use recovery console to repair the Master Boot Record.
You are configuring 5 computers to use both Windows NT workstation 4.0 and Windows 2000 Professional. Each computer has an 8GB hard disk. You configure that hard disk on each computer to have two 4GB partitions. Windows NT workstation is installed on drive C. Windows 2000 Professional is installed on drive D. In Windows 2000 Professional you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart the computer and load Windows NT workstation. You notice that users can still save files to drive D. You want to prevent users from saving files to drive D in either operating system. You also want to ensure that users can access both drives using either operating system. What should you do on each computer? （）A、Use Windows 2000 Professional to configure drive D as a dynamic volumeB、Use Windows 2000 Professional to enable Encrypting File System （EFS） on drive DC、Use Windows NT workstation to configure NTFS permission on drive D to deny the users write permissionD、Reinstall Windows NT workstation after configuring the disk code task
You are the network administrator for Company.com. Your Windows 2000 Professional computer has 128 MB of RAM and two physical hard disks. Each hard disk has a single partition configured as drive C and D. Each partition has more than 500 MB of free disk space. Windows 2000 Professional and all applications are installed on drive C. You frequently run two or more memory-intensive graphics applications simultaneously. You notice that access to drive C is much slower when you are using the graphics applications. You want to maximize overall disk performance for your computer. What should you do?（）A、Configure the paging file to reside on drive C onlyB、Configure the paging file to reside on drive D onlyC、Configure the initial size of the paging file and the maximum size of paging file to 64 MBD、Configure the initial size of the paging file and the maximum size of the paging file to 128 MBE、Configure the initial size of the paging file and the maximum size of the paging file to 256 MB
You are configuring five computers for Windows NT Workstation 4.0 and Windows 2000 Professional. Each computer has an 8 GB hard disk. You configure the hard disk on each computer to have two 4 GB partitions. Windows NT Workstation is installed on drive C and Windows 2000 Professional on drive D. In Windows 2000 Professional， you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart your computer and load Windows NT Workstation. You notice that users can save files to drive D. You want to prevent users from saving the files to drive D in either operating system. You also want to ensure that users can access both drives while using either operating system. What should you do？（）A、Use Windows 2000 Professional to configure drive D as a dynamic partitionB、Use Windows 2000 Professional to enable encrypting file system on drive DC、Use Windows NT workstation to configure NTFS permissions on drive D to deny the users write permissionD、Reinstall Windows NT Workstation after configuring disk quotas
You are a network administrator for ExamSheet.net's Windows 2000 network. A user named Sandra has a Windows 2000 Professional computer with a single hard disk with two partitions configured as drive C and D. A pagefile has been configured on Drive C:. Sandra reports that applications on her Windows 2000 Professional computer are running slowly. You notice that Sandra's computer has 64 MB of RAM. Her hard drive contains 70 MB of free disk space on drive C and 160 MB of free disk space on drive D.You want to improve the performance of Sandra's computer. What should you do?（）A、Move the paging file to drive DB、Use Disk Cleanup to delete temporary files and unnecessary program filesC、Perform a disk analysis， and use the disk defragmenter if recommendedD、Ensure that the Performance Options window is optimized for applicationsE、Ensure that the Performance Options services.
You are a network administrator for ExamSheet.net. You plan to configure your computer to use Windows 98, Windows 2000 Professional and indows NT Workstation 4.0. You also plan to configure a data drive that can be accessed by all operating systems on your computer. Your computer has one 20 GB hard disk. You want to configure your computer as shown in the exhibit. What should do? （）A、Create the boot drive on drive C and format as a FAT16 partition. B、Create the boot drive on drive C and format as a NTFS partition.C、Configure the boot drive as a basic volume and format the volume as FAT32.D、Configure the boot drive as a dynamic volume and format the volume as a FAT16 partition. E、Configure the boot drive as a dynamic volume and format the volume as a FAT32 partition.
You are the administrator of a Windows 2000 network. You are configuring eight computers to use both Windows NT Workstation 4.0 and Windows 2000 Professional. Each computer has a 10 GB hard disk. You configure the hard disk on each computer to have two 5 GB partitions. Windows NT Workstation is installed on drive D. Windows 2000 Professional is installed on drive C. In Windows 2000 Professional, you configure a disk quota on drive C to prevent users from saving work files on the disk. You restart the computers and load Windows NT Workstation 4.0. You notice that users can still save files to drive C. You want to prevent users from saving files to drive C in either operating system. You also want to ensure that users can access both drives while using either operating system. What should you do on each computer? （）A、Reinstall Windows NT Workstation 4.0 after configuring the disk quotasB、Use Windows 2000 Professional to configure drive C as a dynamic partitionC、Use Windows 2000 Professional to enable Encrypting File System （EFS） on drive CD、Use Windows NT Workstation 4.0 to configure NTFS permissions on drive C to deny the usersWrite permission
Your computers have both Windows NT Workstation 4.0， and Windows 2000 Professional operating systems. You configure the hard disk on each computer to have two 4-GB partitions. Windows NT Workstation is installed on drive C， and Windows 2000 Professional is installed on drive D. You configure a disk quota on drive D to prevent users from saving data on the disk. How can you prevent users from saving files to drive D in either operating system？（）A、The required result cannot be obtained with the above given solutionsB、Enable EFS on DC、Format the NT 4 partition and reload NT 4D、Use NT 4.0 NTFS permissions to deny users write access to D
单选题A technician has installed a secondary hard drive for a computer. However, the hard drive is not appearing under My Computer. The disk is receiving power, and appeared on the POST when Windows started. Which of the following Windows utilities would help configure the new hard disk?（）ADisk ManagementBServices and ApplicationsCRemovable StorageDDevice Manager
单选题Your computer has Windows 2000 Professional installed. Your office has a power outrage while you were running the disk defragmenter utility on your computer. When you start the computer again， you receive the following message： "Bad or missing OS". What should you do？（）AStart the computer in safe mode and reformat the hard disk.BStart the computer in the debug mode and reformat the hard disk.CStart the computer using the ERD and repair the Master Boot Record.DStart the computer by using the Windows 2000 Professional CD-Rom. Then use recovery console to repair the Master Boot Record.
单选题You are a network administrator for ExamSheet.net. You plan to configure your computer to use Windows 98, Windows 2000 Professional and indows NT Workstation 4.0. You also plan to configure a data drive that can be accessed by all operating systems on your computer. Your computer has one 20 GB hard disk. You want to configure your computer as shown in the exhibit. What should do? （）ACreate the boot drive on drive C and format as a FAT16 partition. BCreate the boot drive on drive C and format as a NTFS partition.CConfigure the boot drive as a basic volume and format the volume as FAT32.DConfigure the boot drive as a dynamic volume and format the volume as a FAT16 partition. EConfigure the boot drive as a dynamic volume and format the volume as a FAT32 partition.
多选题You are the network administrator for Company.com. Your Windows 2000 Professional computer has 128 MB of RAM and two physical hard disks. Each hard disk has a single partition configured as drive C and D. Each partition has more than 500 MB of free disk space. Windows 2000 Professional and all applications are installed on drive C. You frequently run two or more memory-intensive graphics applications simultaneously. You notice that access to drive C is much slower when you are using the graphics applications. You want to maximize overall disk performance for your computer. What should you do?（）AConfigure the paging file to reside on drive C onlyBConfigure the paging file to reside on drive D onlyCConfigure the initial size of the paging file and the maximum size of paging file to 64 MBDConfigure the initial size of the paging file and the maximum size of the paging file to 128 MBEConfigure the initial size of the paging file and the maximum size of the paging file to 256 MB
多选题You are a network administrator for ExamSheet.net’s Windows 2000 network. Your computer has Windows 2000 Professional installed. Your office has a power utage while you are running the Windows 2000 disk defragmenter. When you restart your computer， you receive the following error message： "Bad or missing operating system". You want your computer to start properly. You want to do this with least amount of administrative effort. What should you do？（）AReinstall the operating systemBStart the computer by using the Windows 2000 Professional CD-ROM.CUse the Recovery Console to repair the Master Boot Record.DUse the Emergency Repair Disk to repair the Master Boot Record.
单选题Your computers have both Windows NT Workstation 4.0， and Windows 2000 Professional operating systems. You configure the hard disk on each computer to have two 4-GB partitions. Windows NT Workstation is installed on drive C， and Windows 2000 Professional is installed on drive D. You configure a disk quota on drive D to prevent users from saving data on the disk. How can you prevent users from saving files to drive D in either operating system？（）AThe required result cannot be obtained with the above given solutionsBEnable EFS on DCFormat the NT 4 partition and reload NT 4DUse NT 4.0 NTFS permissions to deny users write access to D