多个VLAN要跨跃多台交换机,不需要设置Trunk Link。

多个VLAN要跨跃多台交换机,不需要设置Trunk Link。


相关考题:

下面关于虚拟局域网中继(VLAN Trunk)的描述中,错误的是( )。A) VLAN Trunk是交换机与交换机之间、交换机与路由器之间在的物理链路上传输多个VLAN信息的一种技术B) VLAN Trunk的标准机制是帧标签C)目前通常采用的VLAN协议有LSL、IEEE802.10和国际标准1EEE802.1QD)在交换设备之间实现Trunk功能,VLAN协议可以不同

下面用于在交换机中配置Trunk承载的VLAN的命令是( ) A、access vlan vlan-idB、port link-type trunkC、port trunk allow-pass vlanD、set port vlan vlan-id

以下关于虚拟局域网中继(VLAN Trunk)的描述中,错误的是()。A.VLAN Trunk是在交换机与交换机之间、交换机与路由器之间存在的物理链路上传输多个VLAN信息的一种技术B.VLAN Trunk的标准机制是帧标签C.在交换设备之间实现Trunk功能,VLAN协议可以不同D.目前常用的vlan协议有ISL、IEEE802.10和国际标准IEEE802.1Q

When a new trunk link is configured on an IOS based switch, which VLANs are allowed over the link?() A. All defined VLANs are allowed on the trunk by default.B. Each VLAN, or VLAN range, that is specified with the switchport mode command.C. Each VLAN, or VLAN range, that is specified with the vtp domain command.D. Each VLAN, or VLAN range, that is specified with the vlan database command.

VLAN Tagging, also known as Frame Tagging, is a method developed by Cisco to help identify packets travelling through trunk links. When an Ethernet frame traverses a trunk link, a special VLAN tag is added to the frame and sent across the trunk link .How does ERS use the VLAN tag?()A. provide service internetworkingB. support transparency for Layer 2 framesC. indicate destination as a connection identifierD. map to the DLCI in service internetworking

When a new trunk link is configured on an IOS based switch, which VLANs are allowed over the link()。 A.By default, all defined VLANs are allowed on the trunk.B.Each single VLAN, or VLAN range, must be specified with the switchport mode command.C.Each single VLAN, or VLAN range, must be specified with the vtp domain command.D.Each single VLAN, or VLAN range, must be specified with the vlan database command.

在VLAN中,如果一个VLAN跨越多个交换机,则属于同一VLAN的工作站要通过(26)互相通信。A.应用服务器B.主干(Trunk)线路C.环网D.本地交换机

在下面关于VLAN的描述中,不正确的是 ( )A.VLAN把交换机划分成多个逻辑上独立的交换机B.主干链路(Trunk)可以提供多个VLAN之间通信的公共通道C.由于包含了多个交换机,所以VLAN扩大了冲突域D.一个VLAN可以跨越多个交换机

当同一交换机所在端口被划分为两个以上的vlan时,必须要创建Trunk才能在线路上承载多个vlan。

由于园区网中部署了多个VLAN,因此工程师会将交换机之间的链路配置为Trunk,以标记的方式承载不同VLAN的流量。对于锐捷交换机的Trunk接口,以下陈述正确的是()A、默认不传输VLAN1的信息。B、默认传输vlan1的数据,并且vlan1的数据不带tag。C、默认传输从0-4095的所有的VLAN。D、默认传输该交换机上配置的所有的vlan。E、交换机接口默认模式为Trunk。

锐捷交换机VLAN修剪命令格式是下列哪条命令?()A、switchport trunk allowed vlan remove vidB、switchport trunk remove vidC、switchport trunk prune vidD、switchport trunk allowed vid

如果要把交换机Trunk的许可VLAN列表改为默认的许可所有VLAN的状态,应该使用命令()A、no switchporttrunkallowedvlanB、default switchpor t trunkallowed vlanC、switchport trunk allowed vlan resetD、reset switchport trunk allowed vlan

You are the network administrator tasked with designing a switching solution for the Company  network.  Which of the following statements describing trunk links are INCORRECT?()A、 The trunk link belongs to a specific VLAN.B、 Multiple trunk links are used to connect multiple end user devices.C、 A trunk link only supports native VLAN.D、 Trunk links use 802.10 to identify a VLAN.E、 The native VLAN of the trunk link is the VLAN that the trunk uses for untagged packets.

交换机如何将接口设置为TAG VLAN模式?()A、switchport mode tagB、switchport mode trunkC、trunk onD、set port trunk on

在下面关于VLAN的描述中,不正确的是()。A、VLAN把交换机划分成多个逻辑上独立的交换机B、主干链路(Trunk)可以提供多个VLAN之间通信的公共通道C、由于包含了多个交换机,所以VLAN扩大了冲突域D、一个VLAN可以跨越多个交换机

交换机中trunk的作用是()A、解决同一链路传输多个vlan数据问题B、解决vlan识别问题C、解决广播隔离问题D、解决交换机互联问题

在交换机的配置中,能够正确地将NativeVLAN设置为VLAN5的命令是()。A、switchport native vlan 5B、switchport trunk native 5C、switchport native trunk vlan 5D、switchport trunk native vlan 5

下面关于VLAN的描述中,不正确的是()。A、VLAN把交换机划分成多个逻辑上独立的交换机B、主干链路(TRUNK)可以提供多个VLAN之间的公共通信C、由于包含了多个交换机,所以VLAN扩大了冲突域D、一个VLAN可以跨越交换机

VLAN Tagging, also known as Frame Tagging, is a method developed by Cisco to help identify packets travelling through trunk links. When an Ethernet frame traverses a trunk link, a special VLAN tag is added to the frame and sent across the trunk link .How does ERS use the VLAN tag?()A、provide service internetworkingB、support transparency for Layer 2 framesC、indicate destination as a connection identifierD、map to the DLCI in service internetworking

单选题多个VLAN要跨跃多台交换机,不需要设置TrunkLink。( )A错B对

多选题Two switches are connected through a trunk link.which two commands show that there is a native VLAN mismatch on that link?()Ashow interfaces interfaceBshow vlan briefCshow interfaces interface switchportDshow interface interface trunkEshow interfaces vlan

判断题多个VLAN要跨跃交换机,不需要设Trunk Link。A对B错

多选题You are the network administrator tasked with designing a switching solution for the Company  network.  Which of the following statements describing trunk links are INCORRECT?()AThe trunk link belongs to a specific VLAN.BMultiple trunk links are used to connect multiple end user devices.CA trunk link only supports native VLAN.DTrunk links use 802.10 to identify a VLAN.EThe native VLAN of the trunk link is the VLAN that the trunk uses for untagged packets.

单选题下面关于VLAN的描述中,不正确的是()。AVLAN把交换机划分成多个逻辑上独立的交换机B主干链路(TRUNK)可以提供多个VLAN之间的公共通信C由于包含了多个交换机,所以VLAN扩大了冲突域D一个VLAN可以跨越交换机

单选题在下面关于VLAN的描述中,不正确的是()。AVLAN把交换机划分成多个逻辑上独立的交换机B主干链路(Trunk)可以提供多个VLAN之间通信的公共通道C由于包含了多个交换机,所以VLAN扩大了冲突域D一个VLAN可以跨越多个交换机

单选题以下关于虚拟局域网中继(VLAN Trunk)的描述中,错误的是(  )。AVLAN Trunk是在交换机与交换机之间、交换机与路由器之间存在的物理链路上传输多个VLAN信息的一种技术BVLAN Trunk的标准机制是帧标签C在交换设备之间实现Trunk功能,VLAN协议可以不同D目前常用的VLAN协议有ISL。、IEEE 802.10和国际标准IEEE 802.1Q

判断题通过以下命令 Port link-type trunk Port trunk permit vlan 10 可以将交换机的端口设置为 Trunk 端口,允许 VLAN10 报文通过,其他的拒绝。A对B错