You have installed two 64G flash devices to support the Database Smart Flash Cache feature on your database server that is running on Oracle Linux. You have set the DB_SMART_FLASH_FILE parameter: DB_FLASH_CACHE_FILE= ‘/dev/flash_device_1 ‘,’ /dev/flash_device_2’ How should the DB_FLASH_CACHE_SIZE be configured to use both devices?（）A、Set DB_FLASH_CACHE_SIZE=64GB、Set D3_FLASH_CACHE_SIZE=64G, 64GC、Set D3_FLASK_CACKE_SI2E=128GD、db_flash_cache_SI2E is automatically configured by the instance at startup
You have installed two 64G flash devices to support the Database Smart Flash Cache feature on your database server that is running on Oracle Linux. You have set the DB_SMART_FLASH_FILE parameter: DB_FLASH_CACHE_FILE= ‘/dev/flash_device_1 ‘,’ /dev/flash_device_2’ How should the DB_FLASH_CACHE_SIZE be configured to use both devices?（）
- A、Set DB_FLASH_CACHE_SIZE=64G
- B、Set D3_FLASH_CACHE_SIZE=64G, 64G
- C、Set D3_FLASK_CACKE_SI2E=128G
- D、db_flash_cache_SI2E is automatically configured by the instance at startup
相关考题：
Some of you may have finished unitone, _______, you can move onto unit two. A、if you mayB、if you doC、if notD、if so
Some of you may have finished unit one. _____ , you can go on to unit two.A. If you mayB. If you doC. If notD. If so
By the time you arrive, I ______ working for two hoursA. will beB. canC. will have beenD. have been
听力原文：Your check is a forward one. We will make payment at the maturity.(3)A．You can have the check encashed now.B．You will have the money in one or two days.C．You can not have the check encashed.D．You have to wait for the payment till the maturity.
A new switch is being installed in the Ezonexam network and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this? (Choose all that apply).A．You must set each end of the trunk line to IEEE 802.1e encapsulation.B．You must set the same VTP management domain name on both switches.C．You must set all ports on the two switches as access ports.D．You must configure one of the switches as a VTP server.E．You must use a rollover cable to connect the two switches.
To enable the Database Smart Flash Cache, you configure the following parameters:DB_FLASH_CACHE_FILE = ‘/dev/flash_device_1’ , ‘/dev/flash_device_2’DB_FLASH_CACHE_SIZE=64GWhat is the result when you start up the database instance?（）A. It results in an error because these parameter settings are invalid.B. One 64G flash cache file will be used.C. Two 64G flash cache files will be used.D. Two 32G flash cache files will be used.
“Rex told me you have moved．”“Yes,into a_______．”A.two-storey houseB.house of two storyC.house of two storiesD.two-stories house
You work as an administrator at ABC.com.The ABC.com network consists of a single domain named ABC.com.All servers in the ABC.com domain， including domain controllers， have Windows Server 2012 R2 installed.The ABC.com network has a server named ABC_SR09 that hosts two virtual machines.How would you enable Network Load Balancing （NLB） on the virtual machines？（）A、You should configure Router Guard on the two virtual machines.B、You should configure Port Mirroring on the two virtual machines.C、You should add the Network Load Balancing feature on the two virtual machines.D、You should configure Integration Services on ABC_SR09.E、You should configure NIC Teaming on the two virtual machines.F、You should enable spoofing of MAC Address on the two virtual machines.
A new switch is being installed and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this?（）A、You must set each end of the trunk line to IEEE 802.1e encapsulation.B、You must set the same VTP management domain name on both switches.C、You must set all ports on the two switches as access ports.D、You must configure one of the switches as a VTP server.E、You must use a rollover cable to connect the two switches.
You work as a network Exchange administrator at Company.com.The Company.com network currently consists of a single Active Directory forest containing a single domain named Company.com.The Company.com organization makes use of Microsoft Exchange Server 2008 Service Pack 2 （SP2） as their messaging solution.During the course of the business week you receive instruction from Company.com to plan the installation of Microsoft Exchange Server 2010 whilst ensuring you install the Microsoft Exchange Server 2010 prerequisites for the Mailbox， Hub Transport and Client Access server roles. What should you do？（）A、You should consider having Windows Management Framework installed.You should have Message Queuing installed before installing the Web Server role.B、You should consider having Windows Management Framework installed.You should then have the Web Server role installed before installing the RPC over HTTP Proxy component.C、You should consider having Microsoft .NET Framework 3.5 Service Pack 1 （SP1） installed. You should then have Install Windows Management Framework installed and run the ServerManagerCmd.exe -IP Exchange-Typical.xml command.D、You should consider having Microsoft .NET Framework 3.5 Service Pack 1 （SP1） installed. You should then have Windows Remote Management （WinRM） 2.0 installed and run the ServerManagerCmd.exe -IP Exchange-Base.xml command.
You are designing a remote administration solution that meets business requirements. You need to specify client or server software that will be required. What should you do？（）A、Ensure that all client computers have a graphical Telnet client installedB、Ensure that all client computers have the Remote Desktop Connection client software installedC、Ensure that all server computers have RCONSOLE installed and that it is configured to start automaticallyD、Ensure that all server computers have Remote Administration （HTML） installed
You work as the IT professional in an international company which is named Wiikigo. You are experiencedin implementing and administering a network operating system. You are specialized in deploying servers，configuring Windows Server 2008 Terminal services and network application services， and configuring aweb services infrastructure. You have two servers that run Windows Server 2008 Enterprise. Both servershave the Failover Clustering feature installed. You have the servers configured as a two-node cluster. Thecluster nodes are named NODE1 and NODE2. You have an application named PrintService that includes aprint spooler resource. You need to configure the cluster to automatically return the PrintService applicationto NODE1 after a failover. Which two actions should you perform？（）A、The Allow Failback and Immediate options should be enabled for the PrintService application.B、The If restart is unsuccessful， failover all resources in this server or application option should bedisabled in the properties of the print spooler resource.C、The Period （hours） option should be set to 0 in the properties of the print spooler resource.D、NODE1 should be moved to the top of the list of preferred owners for the PrintService application.
You work as an administrator at ABC.com. The ABC.com network consists of a single domain named ABC.com.All servers on the ABC.com network have Windows Server 2012 R2 installed.ABC.com has a server， named ABC-SR07， which has two physical disks installed.The C:// drive hosts the boot partition， while the D:// drive is not being used. Both disks are online. You have received instructions to create a virtual machine on ABC-SR07. Subsequent to creating the virtual machine， you have to connect the D:// drive to the virtual machine. Which of the following is TRUE with regards to connecting a physical disk to a virtual machine？（）A、The physical disk should not be online.B、The physical disk should be uninstalled and re-installed.C、The physical disk should be configured as a striped disk.D、The physical disk should be configured as a mirrored disk.
You are the administrator of Company’s network.You install 50 new Windows 2000 Professional computers in the marketing department. Two weeks later,users report that five of the computers have stopped responding. You troubleshoot the five computers.You find that some users have installed unsigned device drivers that are not supported by Windows 2000Professional.You want to determine which drivers were installed by users.What should you do?（）A、Run the chkdsk /f command on all drives on the computers.B、Configure Windows 2000 Professional to enable driver signing verification.C、Run the File Signature Verification tool on the computers.D、Run the System File Checker utility on the computers.
You have a server that runs Windows Server 2008. The server has the Web Server （IIS） server role installed and all the Web Server role services installed. You need to provide a user the ability to administer a Web site. Which feature should you configure？（）A、Net RolesB、Net UsersC、AuthenticationD、IIS Manager Permissions
You have an Exchange organization named nwtraders.com.All servers in the organization have Exchange Server 2010 Service Pack 1 （SPl） installed.Your company acquires another company named Contoso， Ltd. You plan to create new mailboxes for each user from Contoso. You need to ensure that each new mailbox can receive e-mail messages sent to contoso.com.Which two objects should you create？（）A、a Receive connectorB、a Remote domainC、an organizational relationshipD、an accepted domainE、an e-mail address policy
Your computers have both Windows NT Workstation 4.0， and Windows 2000 Professional operating systems. You configure the hard disk on each computer to have two 4-GB partitions. Windows NT Workstation is installed on drive C， and Windows 2000 Professional is installed on drive D. You configure a disk quota on drive D to prevent users from saving data on the disk. How can you prevent users from saving files to drive D in either operating system？（）A、The required result cannot be obtained with the above given solutionsB、Enable EFS on DC、Format the NT 4 partition and reload NT 4D、Use NT 4.0 NTFS permissions to deny users write access to D
单选题—Have you finished the poster for the party?—Not yet. I ______ it in two days.AfinishBfinishedCwill finishDwill have finished
单选题You should assemble the Windows Sound System microphoneAbefore you have installed your audio hardware.Bbefore you connect it to your hardware.Cafter you have connected it to your hardware.
单选题You are installing Windows 2000 Professional on 100 MPS compliant computers. You have created an image of this computer and copied the image to two test computers， which have two processors installed on them. When you run the test computers， you find out that the second processor on both the computers is not being used. What should you do to enable the second processor？（）AOn your original machine use Device Manager/Computer/Properties/Drivers/Update Driver to install the correct multiprocessor HAL. BOn the original computer, through the Add New Hardware, select the processor from the device list and install the required processor. CDownload the patch from the motherboard manufacturer to allow the configuration of dual processors. DReinstall Windows 2000 Professional on both the test computers.
多选题Which should you check to verify that you have correct software product versions installed?（）AAdministration GuideBRelease NotesCSoftware CenterDApplication AdministrationECompatibility MatricesFpatch availability
单选题Your computers have both Windows NT Workstation 4.0， and Windows 2000 Professional operating systems. You configure the hard disk on each computer to have two 4-GB partitions. Windows NT Workstation is installed on drive C， and Windows 2000 Professional is installed on drive D. You configure a disk quota on drive D to prevent users from saving data on the disk. How can you prevent users from saving files to drive D in either operating system？（）AThe required result cannot be obtained with the above given solutionsBEnable EFS on DCFormat the NT 4 partition and reload NT 4DUse NT 4.0 NTFS permissions to deny users write access to D
单选题You have installed two 64G flash devices to support the Database Smart Flash Cache feature on your database server that is running on Oracle Linux. You have set the DB_SMART_FLASH_FILE parameter: DB_FLASH_CACHE_FILE= ‘/dev/flash_device_1 ‘,’ /dev/flash_device_2’ How should the DB_FLASH_CACHE_SIZE be configured to use both devices?（）ASet DB_FLASH_CACHE_SIZE=64GBSet D3_FLASH_CACHE_SIZE=64G, 64GCSet D3_FLASK_CACKE_SI2E=128GDdb_flash_cache_SI2E is automatically configured by the instance at startup
多选题You have an Exchange organization named nwtraders.com.All servers in the organization have Exchange Server 2010 Service Pack 1 （SPl） installed.Your company acquires another company named Contoso， Ltd. You plan to create new mailboxes for each user from Contoso. You need to ensure that each new mailbox can receive e-mail messages sent to contoso.com.Which two objects should you create？（）Aa Receive connectorBa Remote domainCan organizational relationshipDan accepted domainEan e-mail address policy
单选题You work as a network Exchange administrator at Company.com.The Company.com network currently consists of a single Active Directory forest containing a single domain named Company.com.The Company.com organization makes use of Microsoft Exchange Server 2008 Service Pack 2 （SP2） as their messaging solution.During the course of the business week you receive instruction from Company.com to plan the installation of Microsoft Exchange Server 2010 whilst ensuring you install the Microsoft Exchange Server 2010 prerequisites for the Mailbox， Hub Transport and Client Access server roles. What should you do？（）AYou should consider having Windows Management Framework installed.You should have Message Queuing installed before installing the Web Server role.BYou should consider having Windows Management Framework installed.You should then have the Web Server role installed before installing the RPC over HTTP Proxy component.CYou should consider having Microsoft .NET Framework 3.5 Service Pack 1 （SP1） installed. You should then have Install Windows Management Framework installed and run the ServerManagerCmd.exe -IP Exchange-Typical.xml command.DYou should consider having Microsoft .NET Framework 3.5 Service Pack 1 （SP1） installed. You should then have Windows Remote Management （WinRM） 2.0 installed and run the ServerManagerCmd.exe -IP Exchange-Base.xml command.