单选题You are installing Windows 2000 Professional on 100 MPS compliant computers. You have created an image of this computer and copied the image to two test computers， which have two processors installed on them. When you run the test computers， you find out that the second processor on both the computers is not being used. What should you do to enable the second processor？（）AOn your original machine use Device Manager/Computer/Properties/Drivers/Update Driver to install the correct multiprocessor HAL. BOn the original computer, through the Add New Hardware, select the processor from the device list and install the required processor. CDownload the patch from the motherboard manufacturer to allow the configuration of dual processors. DReinstall Windows 2000 Professional on both the test computers.
单选题
You are installing Windows 2000 Professional on 100 MPS compliant computers. You have created an image of this computer and copied the image to two test computers， which have two processors installed on them. When you run the test computers， you find out that the second processor on both the computers is not being used. What should you do to enable the second processor？（）
A
On your original machine use Device Manager/Computer/Properties/Drivers/Update Driver to install the correct multiprocessor HAL.
B
On the original computer, through the Add New Hardware, select the processor from the device list and install the required processor.
C
Download the patch from the motherboard manufacturer to allow the configuration of dual processors.
D
Reinstall Windows 2000 Professional on both the test computers.
参考解析
解析：
暂无解析
相关考题：
You want to configure a multiboot system with Windows NT Workstation and Windows 2000 Professional.What should you do?A．When installing Windows 2000 Professional run chkdisk in Windows NT Workstation.B．Disable the disk compression in Windows NT Workstation.C．Install service pack four or later in Windows NT Workstation.D．Install the distributed file system client on the Windows NT Workstation.
You are the administrator of your company's network. Your network has five Windows 2000 server computers and 75 Windows 2000 Professional computers. The Windows 2000 Professional computers were installed by using a RIS image on one of the Windows 2000 Server computers. You need to upgrade several applications on the Windows 2000 Professional computers. The applications do not have built-in support for scripted installations.You want to accomplish the following goals:1. An unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers.2. Existing user environments will be maintained on the Windows 2000 Professional computers.3. The network name of each Windows 2000 Professional computer will be changed to match its asset tag.4. The RIS image and the upgraded applications will be enabled as they are added to the network.You take the following actions:1. Install the RIS image on a Windows 2000 Professional computer named Computer1.2. Install the upgraded applications on Computers1.3. Change the network name of Computer1 to %DMI-SERIAL_NUM%.4. Run RIPrep.exe on Computer1 to load the RIS image on to the RIS server.5. Start all of the Windows 2000 Professional computers, and then load the RIS image from the RIS server.Which result or results do these actions produce? (Choose all that apply.)A．An unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers.B．Existing user environments will be maintained on the Windows 2000 Professional computers.C．The network name of each Windows 2000 Professional computer will be changed to match its asset tag.D．The RIS image and the upgraded applications will be enabled as they are added to the network.
You are installing Windows 2000 server on Windows NT using an unattended installation. You find out the SCSI adapter is not supported by Microsoft HCL. You find out from the manufacturer that a new driver is available for installing on Windows 2000. How should you enter this information in the unattended installation?A．Specify $OEM$/TextmodeB．Specify $OEM$/C$/DriversC．Create a subfolder pointing to the share pointD．Create a subfolder called drivers.
You want to upgrade 100 computers from Windows 98 to Windows 2000 Professional. You use setup manager to create the unattended.txt file. The hardware on each computer is configured identically. You upgrade 10 of the computers. You notice that the monitors on the 10 computers go blank after Windows 2000 Professional loads. You restart one of the computers in Safe Mode, and find that the monitor appears to be working. Which change should you make to unattend.txt to configure your video settings correctly?Click the appropriate line on the Unattend.txt Notepad screen.
your company has servers that run windows server 2008. All client computers run windows XP service pack 2 (SP2.). windows 2000 professional, or windows vista. You need to ensure all computers can use the IPv6 protocol. What should you do?（）A.Install service pack 4 on all windows 2000 professional computers.B.Upgrade the windows 2000 professional computers to windows XP SP2.C.Run the IPv6.exe tool on the windows 2000 professional and windows XP computers.D.Install active directory client extenticon. (DSClient.exe) on the windows 2000 professional and windows XP computers.
You attach a USB camera to your Windows 2000 Professional computer. Windows 2000 Professional detects the camera and prompts you to install the manufacturer’s device driver. You do it， and then you restart the computer. When Win2000 Professional loads， you notice that your USB keyboard does not respond. You suspect that the camera drivers are not certified for Win2000 Professional. You want to configure your computer to enable your use keyboard and to prevent uncertified drivers from being installed in the future. What should you do？ （）A、Configure Windows 2000 Professional to enable driver signing.B、Configure Windows 2000 Professional to disable driver signing.C、Start the computer by using the recovery console， restore the system state data.D、Start the computer in safe mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.E、Start the computer in debug mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.
You want to configure a multiboot system with Windows NT Workstation and Windows 2000 Professional. What should you do？（）A、 When installing Windows 2000 Professional run chkdisk in Windows NT Workstation.B、 Disable the disk compression in Windows NT Workstation.C、 Install service pack four or later in Windows NT Workstation.D、 Install the distributed file system client on the Windows NT Workstation.
Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use NetBIOS names to connect to all shared resources as the network. You configure a TCP/IP address and a subnet mask on each new computer. Which 2 additional TCP/IP properties should you configure on each new computer？（）A、The bindings.B、A DNS address.C、A Gateway address.D、A WINS server address.E、A DHCP server address.
your company has servers that run windows server 2008. All client computers run windows XP service pack 2 (SP2.). windows 2000 professional, or windows vista. You need to ensure all computers can use the IPv6 protocol. What should you do?（）A、Install service pack 4 on all windows 2000 professional computers.B、Upgrade the windows 2000 professional computers to windows XP SP2.C、Run the IPv6.exe tool on the windows 2000 professional and windows XP computers.D、Install active directory client extenticon. (DSClient.exe) on the windows 2000 professional and windows XP computers.
You are the administrator of WXYZ.com Incorporation. Your company’s network consists of Windows 2000 Professional clients and Windows 2000 Servers. Users have started reporting that the network performance has degraded in recent times. Most of the Windows 2000 Professional clients on your network use the TCP/IP protocol to communicate with the Server. You want to increase network performance. Where do you change the binding order？（）A、Windows 2000 Server Network Binding Server TCP/IP on the top.B、Windows 2000 Server Network Binding Workstation TCP/IP on the top.C、Windows 2000 Professional Network Binding Server TCP/IP on the top.D、Windows 2000 Professional Network Binding Server TCP/IP on the bottom.E、Windows 2000 Professional Network Binding Workstation TCP/IP on the top.F、Windows 2000 Professional Network Binding Workstation TCP/IP on thebottom.
You are preparing to install Windows 2000 Professional on 100 MPS-compliant computers. Each computer has two 550-MHz processors. The Computers are configured identically. You want to use one of the computers as a reference computer for deploying Windows 2000 Professional to the remaining Computers. You install Windows 2000 Professional on the reference computer. You view Device Manager and notice that the drivers for the second processor are not installed. You want to add support for the second processor on the remaining 99 computers. You want to accomplish this with the least amount of administrative effort. What should you do? （）A、 Use Setup Manager to configure the reference computer, and then create a disk image. B、 Use the System Preparation Tool with the -pnp parameter to set up the reference disk, and then create a disk image. C、 Use Device Manager to add the appropriate hardware abstraction layer (HAL) to the reference computer to support the second processor, and then Create a disk image. D、 After imaging the reference computer, restart the reference computer in safe mode and add the driver for the second processor.
You are configuring 5 computers to use both Windows NT workstation 4.0 and Windows 2000 Professional. Each computer has an 8GB hard disk. You configure that hard disk on each computer to have two 4GB partitions. Windows NT workstation is installed on drive C. Windows 2000 Professional is installed on drive D. In Windows 2000 Professional you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart the computer and load Windows NT workstation. You notice that users can still save files to drive D. You want to prevent users from saving files to drive D in either operating system. You also want to ensure that users can access both drives using either operating system. What should you do on each computer? （）A、Use Windows 2000 Professional to configure drive D as a dynamic volumeB、Use Windows 2000 Professional to enable Encrypting File System （EFS） on drive DC、Use Windows NT workstation to configure NTFS permission on drive D to deny the users write permissionD、Reinstall Windows NT workstation after configuring the disk code task
Most of the Windows 2000 Professional clients on your network use the TCP/IP Protocol to communicate with Server. You want to increase network performance. Where do you change the binding order of your protocols？ （）A、On the Windows 2000 Server， set TCP/IP for the Server service at the top.B、On the Windows 2000 Professional computers， set TCP/IP for the Workstation service at the top.C、On the Windows 2000 Server， set TCP/IP for the Workstation service at the top.D、On the Windows 2000 Professional computers， set TCP/IP for the Server service at the top.
You are the administrator of your company’s network. The software department is preparing to rewrite an accounting application so that it will run on Windows 2000 Professional computers. All of the computers in the software department currently use Windows 98. You want to configure the computers in the software department so that the users can use both Windows 98 and Windows 2000 Professional during the project. You also want to ensure that the computers are configured for optimal disk performance. In addition you want to ensure that users in the software department can access all of the files on their computers by using either operating system. What should you do? （）A、 Create and format a FAT 32 partition.B、 Create and format an NTFS volume.C、 Configure Windows 2000 Professional to enable disk compression.D、 Configure Windows 2000 Professional to enable dynamic volume
You want to configure your Windows NT Workstation 4.0 computer Company1 to run both Windows NT Workstation and Windows 2000 Professional. What should you do before installing Windows 2000 Professional on Company1? （）A、 Run Check Disk in Windows NT Workstation 4.0.B、 Disable disk compression in Windows NT Workstation 4.0.C、 Install Service Pack 4 or later for Windows NT Workstation 4.0.D、 Install the Distributed file system （Dfs） client in Windows NT Workstation 4.0.
单选题You are configuring five computers for Windows NT Workstation 4.0 and Windows 2000 Professional. Each computer has an 8 GB hard disk. You configure the hard disk on each computer to have two 4 GB partitions. Windows NT Workstation is installed on drive C and Windows 2000 Professional on drive D. In Windows 2000 Professional， you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart your computer and load Windows NT Workstation. You notice that users can save files to drive D. You want to prevent users from saving the files to drive D in either operating system. You also want to ensure that users can access both drives while using either operating system. What should you do？（）AUse Windows 2000 Professional to configure drive D as a dynamic partitionBUse Windows 2000 Professional to enable encrypting file system on drive DCUse Windows NT workstation to configure NTFS permissions on drive D to deny the users write permissionDReinstall Windows NT Workstation after configuring disk quotas
多选题Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use NetBIOS names to connect to all shared resources as the network. You configure a TCP/IP address and a subnet mask on each new computer. Which 2 additional TCP/IP properties should you configure on each new computer？（）AThe bindings.BA DNS address.CA Gateway address.DA WINS server address.EA DHCP server address.
单选题As the administrator of your company’s network, you will be installing Windows 2000 Professional on 10 new Pentium III computers. Your company does business with a horde of countries and accepts many currencies. You must ensure that international currency options are set for 5 of the 10 computers. The remaining 5 computers must be configured to support different input locales. How can you most efficiently set the correct international currency options and configure different input locales on each specified group of computers? （）A During the unattended installation of Windows 2000 Professional.B Make the appropriate changes in the regional settings dialogue box during the installation of Windows 2000 Professional.C After Windows 2000 Professional is installed， logon and make the changes through thecontrol panel.D Make the appropriate changes in the date and time settings dialogue box during theinstallation of Windows 2000 Professional.
多选题You are an administrator in a company that has Windows 2000 Professional systems. Your users have been installing unsupported USB drivers on to their systems causing them to lock up and fail. You want to insure that only drivers that are in the HAL can be installed. What must be done？（）AIgnore - Install all files， regardless of file signatureBWarn - Display a message before installing an unsigned fileCBlock - Prevent installation of unsigned filesDApply setting as system default
多选题You are the administrator of your company’s network. You network has five Windows 2000 server computers and 75 Windows 2000 Professional computers. The Windows 2000 Professional computers were installed by using a RIS image on one of the Windows 2000 Server computers. You need to upgrade several applications on the Windows 2000 Professional computers. The applications do not have built-in support for scripted installations. You want to accomplish the following goals: An unattended installation of the upgraded applications will be performed on the Windows 20000 Professional computers. Existing user environments will be maintained on the Windows 2000 Professional computers. The network name of each Windows 2000 Professional computer will be changed to match its asset tag. The RIS image and the upgraded applications will be enabled as they are added to the network. You take the following actions: Install the RIS image on a Windows 20000 Professional computer named Computer1. Install the upgraded applications on Computers1. Change the network name of Computer1 to %DMI-SERIAL_NUM%. Run RIPrep.exe on Computer1 to load the RIS image on to the RIS server. Start all of the Windows 2000 Professional computers, and then load the RIS image from the RIS server. Which result or results do these actions produce?（ ）AAn unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers.BExisting user environments will be maintained on the Windows 2000 Professional computers.CThe network name of each Windows 2000 Professional computer will be changed to matchIts asset tag.DThe RIS image and the upgraded applications will be enabled as they are added to the N.etwork.
单选题You are the network administrator for Company.com. Your computer has a CD-ROM drive attached to a SCSI adapter. You plan to upgrade your computer from Windows NT Workstation 4.0 to Windows 2000 Professional. You determine that the SCSI adapter is not included on the current Hardware Compatibility List (HCL) and that the original SCSI drivers that you used for Windows NT are not compatible with Windows 2000 Professional. You want to upgrade your computer to Windows 2000 Professional. What should you do?（）A Replace the SCSI adapter card with a Windows 2000 Professional compatible SCSI adapter. Start the installation from the Windows 2000 Professional CD-ROM. Add the new adapter card drivers when you are prompted. B Obtain Windows 2000 drivers from the SCSI adapter manufacturer. Copy the drivers to C:/Winnt folder. Start the installation from the Windows 2000 Professional CD-ROM. C Obtain Windows 2000 drivers from the SCSI adapter manufacturer. Start the installation by using the Windows 2000 Professional CD-ROM- Add the new adapter card drivers when you are prompted. D Modify Config.sys to use your existing SCSI adapter and existing CD-ROM drive. Using Windows NT 4.0, start the installation by running Winnt32.exe from the I386 folder on the Windows 2000 Professional CD-ROM.
单选题You are the administrator of a Windows 2000 network. You are configuring eight computers to use both Windows NT Workstation 4.0 and Windows 2000 Professional. Each computer has a 10 GB hard disk. You configure the hard disk on each computer to have two 5 GB partitions. Windows NT Workstation is installed on drive D. Windows 2000 Professional is installed on drive C. In Windows 2000 Professional, you configure a disk quota on drive C to prevent users from saving work files on the disk. You restart the computers and load Windows NT Workstation 4.0. You notice that users can still save files to drive C. You want to prevent users from saving files to drive C in either operating system. You also want to ensure that users can access both drives while using either operating system. What should you do on each computer? （）AReinstall Windows NT Workstation 4.0 after configuring the disk quotasBUse Windows 2000 Professional to configure drive C as a dynamic partitionCUse Windows 2000 Professional to enable Encrypting File System （EFS） on drive CDUse Windows NT Workstation 4.0 to configure NTFS permissions on drive C to deny the usersWrite permission
单选题You want to upgrade your MS Windows 98 computer to Windows 2000 professional. Before the actual installation， you want to know whether your system’s hardware or software is compatible with Windows 2000 professional or not. What you will do. （）AConsult the HCL.BSee the online documentation of Windows 2000 professional. CRun WINNT32/CHECKUPGRADEONLY.DConsult the technical support team of Windows 2000.
多选题You are the administrator of Company.com’s Windows 2000 Network. Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. All computers are in the Company.com domain. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use host names to connect to shared resources on the network. You configure a TCP/IP address, a gateway address and a subnet mask on each new computer. You want to complete the configuration to allow the computers to communicate on the network. What should you do?（）AConfigure a HOSTS file.BConfigure a LMHOSTS file.CConfigure a WINS server database.DConfigure a DHCP server address.EConfigure at least one DNS address.
单选题You want to configure your Windows NT Workstation 4.0 computer Company1 to run both Windows NT Workstation and Windows 2000 Professional. What should you do before installing Windows 2000 Professional on Company1? （）A Run Check Disk in Windows NT Workstation 4.0.B Disable disk compression in Windows NT Workstation 4.0.C Install Service Pack 4 or later for Windows NT Workstation 4.0.D Install the Distributed file system （Dfs） client in Windows NT Workstation 4.0.
单选题You want to install Windows 2000 Professional on 45 new computers on your company’s network. You first install Windows 2000 Professional on one of the new computers. You log on to the computer by using the local administrator account. You install Microsoft Office 97, a virus scanner, and other company-standard applications. You then create a RIS image of the computer you configured. You want to configure the RIS image so that the standard applications will be accessible to the user when the user first logs on to the network. What should you do?（）ARun Rbfg.exe before installing the standard applications. BRun RIPrep.exe before installing the standard applications. CCopy the all users profile to the default users profile.DCopy the local administrator account profile to the default users profile
单选题Your company has servers that run Windows Server 2008. All client computers run Windows XP Service Pack 2 （SP2）. Windows 2003 Professional， or Windows Vista. You need to ensure all computers can use the IPv6 protocol. What should you do（）AInstall Serivce Pack 4 on all Windows 2000 Professional computersBUpgrade the Windows 2000 professional computers to Windows XP SP2CRun the IPv6.exe tool on the Windows 200 Professional and Windows XP computersDInstall Active Directory Client extention （DSClient.exe） on the Windows 2000 Professional and Windows XP computers.