单选题A remote user is attempting to install a new external storage device on their computer. The user reports they only have one port open on the back of the device and the port is similar to the USB port their mouse is connected to. The port has a bevel on one side and is slightly larger than the USB port. Which of the following connector types is MOST likely being described?（）AIEEE 1394BUSB 2.0CPCMCIADParallel
单选题
A remote user is attempting to install a new external storage device on their computer. The user reports they only have one port open on the back of the device and the port is similar to the USB port their mouse is connected to. The port has a bevel on one side and is slightly larger than the USB port. Which of the following connector types is MOST likely being described?（）
A
IEEE 1394
B
USB 2.0
C
PCMCIA
D
Parallel
参考解析
解析：
暂无解析
相关考题：
You are the administrator of Ezonexam.com's network.You want to connect your Windows 2000 Professional computer to a new TCP/IP based laser print device. The print device is Plug and Play compliant and is included on the current Hardware Compatibility List (HCL). When you attempt to create a new TCP/IP printer port you receive the following error message:"Specified Port cannot be added. The port already exists."You want to be able to use the new TCP/IP printer.What should you do?A．Modify the properties of the existing printer port to use the new print device.B．Change the LPT port setting to bidirectional in the BIOS on your computer.C．Change the LPT port setting to enable legacy Plug and Play detection on your computer.D．Obtain and install the WDM-compliant device drivers and printing software for the printer.
You have configured the Odyssey Access Client with a profile which has the "Disable Server Verification" setting cleared.What will be the result if the device certificate on the MAG Series device has expired and the user attempts to authenticate?（）A. The user will be instructed to call the network administrator.B. The user will fail authentication.C. The user will be prompted to install a new device certificate on the MAG Series device.D. The user will successfully authenticate and have full network access.
A technician plugs a USB device into the computer. The system tray displays a message that reports the device is installed, but may not work properly. Which of the following is the MOST likely cause of the message?（）A. The device needs a firmware updateB. The device needs an updated driver installedC. The plugged in device is too slow for the USB port speedD. The device is incompatible with the installed version of Windows
A new Catalyst switch is connected to an existing switch using a crossover cable. As a result of this, what would the switch port link lights display?() A. The switch port link lights will be off on both switches indicating the ports are not connected.B. The switch port link light will be off on one switch indicating that STP has disabled the port.C. The switch port link lights will flash amber indicating an error.D. The switch port link lights will be green indicating normal operation.
Refer to the exhibit. A junior network administrator was given the task of configuring port security on SwitchA to allow only PC_A to access the switched network through port fa0/1. If any other device is detected, the port is to drop frames from this device. The administrator configured the interface and tested it with successful pings from PC_A to RouterA, and then observes the output from these two show commands.Which two of these changes are necessary for SwitchA to meet the requirements? （）A.Port security needs to be globally enabled.B.Port security needs to be enabled on the interface.C.Port security needs to be configured to shut down the interface in the event of a violation.D.Port security needs to be configured to allow only one learned MAC address.E.Port security interface counters need to be cleared before using the show command.F.The port security configuration needs to be saved to NVRAM before it can become active.
A new Catalyst switch is connected to an existing switch using a crossover cable. As a result of this, what would the switch port link lights display?（）A、The switch port link lights will be off on both switches indicating the ports are not connected.B、The switch port link light will be off on one switch indicating that STP has disabled the port.C、The switch port link lights will flash amber indicating an error.D、The switch port link lights will be green indicating normal operation.
A technician plugs a USB device into the front panel of a desktop computer and nothing happens.The technician knows that plug-n-play is enabled. Which of the following BEST describes a possible cause to this issue?（）A、The technician plugged a USB 2.0 device into a USB 1.1 port.B、The technician needs to reboot the computer for the device to work.C、The technician plugged a USB 1.1 device into a USB 2.0 port.D、The front panel connectors are not plugged into the motherboard.
A just announced two-port Ethernet card has been installed on a system and it is not recognized. On the HMC the slot shows empty. The device driver has been installed and cfgmgr runs normally. What is the most appropriate action to solve this problem?（）A、Update the HMC softwareB、Update the system firmwareC、Re-install the device driverD、Flash update the two-port card
UE的传输模式包括：A、Single-antenna port ：port0、port5B、Transmit diversityspatial multiplexingC、Open-loopClosed-loop spatial multiplexingD、Multi-user MIMO
A remote user is attempting to install a new external storage device on their computer. The user reports they only have one port open on the back of the device and the port is similar to the USB port their mouse is connected to. The port has a bevel on one side and is slightly larger than the USB port. Which of the following connector types is MOST likely being described?（）A、IEEE 1394B、USB 2.0C、PCMCIAD、Parallel
A technician plugs a USB device into the computer. The system tray displays a message that reports the device is installed, but may not work properly. Which of the following is the MOST likely cause of the message?（）A、The device needs a firmware updateB、The device needs an updated driver installedC、The plugged in device is too slow for the USB port speedD、The device is incompatible with the installed version of Windows
A user has a small network of four computers that they want to connect to a single cable modem. Which of the following devices would allow the user to do this？（）A、Four port switchB、Four port wireless routerC、Four port WAPD、Four port hub
You have a computer running Windows 2000 Professional. You have purchased a new USB scanner. You attached it to the USB port. When you go to device manager to see the status of the USB port， you find a USB controller there but with a yellow warning icon next to the host controller name. What should you do to resolve this problem？ （）A、Update the scanner drivers using certified driversB、Enable the USB port in the computers BIOS again.C、Contact the maker or vendor for you system and obtain the current version of BIOS.D、Enable the USB hub controller in device manager.
You are the administrator of Company's network. You wish to connect your Windows 2000 Professional computer to a new TCP/IP based Plug and Play compliant print device. The print device is included on the current Hardware Compatibility List (HCL) When you attempt to create a new TCP/IP printer port, you receive the following message: "Specified Port cannot be added. The port already exists." You want to create a new TCP/IP printer port. What should you do? （）A、Change the LPT port setting to enable legacy Plug and Play detection on your computer.B、Delete the existing printer port.C、Change the LPT port setting to bidirectional in the BIOS on your computer.D、Obtain and install the WDM-compliant device drivers and printing software for the printer.
You have a computer running Windows 2000 Professional. You have purchased a new USB scanner. You attached it to the USB port. When you go to device manager to see the status of the USB port， You did not find any USB controller there. You then reboot your system and go to system BIOS settings and enable the USB Controller. But it is still missing. What should you do to resolve this problem？（）A、Update the scanner drivers using certified driversB、Enable the USB port in the computers BIOS again.C、Contact the maker or vendor for you system and obtain the current version of BIOS.D、Enable the USB hub controller in device manager.E、Reinstall the USB device driver and disable the USB error detection
You have a computer running Windows 2000 Professional. You have purchased a new USB scanner. You attached it to the USB port. When you go to device manager to see the status of the USB port， you did not find any USB controller there. What should you do to resolve this problem？（）A、Update the scanner drivers using certified driversB、Enable the USB port in the computers BIOSC、Enable the USB hub controller in device manager.D、Reinstall the USB device driver and disable the USB error detection
单选题A technician plugs a USB device into the front panel of a desktop computer and nothing happens.The technician knows that plug-n-play is enabled. Which of the following BEST describes a possible cause to this issue?（）AThe technician plugged a USB 2.0 device into a USB 1.1 port.BThe technician needs to reboot the computer for the device to work.CThe technician plugged a USB 1.1 device into a USB 2.0 port.DThe front panel connectors are not plugged into the motherboard.
单选题You have a computer running Windows 2000 Professional. You have purchased a new USB scanner. You attached it to the USB port. When you go to device manager to see the status of the USB port， you find a USB controller there but with a yellow warning icon next to the host controller name. What should you do to resolve this problem？ （）AUpdate the scanner drivers using certified driversBEnable the USB port in the computers BIOS again.CContact the maker or vendor for you system and obtain the current version of BIOS.DEnable the USB hub controller in device manager.
单选题You have a computer running Windows 2000 Professional. You have purchased a new USB scanner. You attached it to the USB port. When you go to device manager to see the status of the USB port， you did not find any USB controller there. What should you do to resolve this problem？（）AUpdate the scanner drivers using certified driversBEnable the USB port in the computers BIOSCEnable the USB hub controller in device manager.DReinstall the USB device driver and disable the USB error detection
单选题A new Catalyst switch is connected to an existing switch using a crossover cable. As a result of this, what would the switch port link lights display?（）AThe switch port link lights will be off on both switches indicating the ports are not connected.BThe switch port link light will be off on one switch indicating that STP has disabled the port.CThe switch port link lights will flash amber indicating an error.DThe switch port link lights will be green indicating normal operation.
单选题A technician plugs a USB device into the computer. The system tray displays a message that reports the device is installed, but may not work properly. Which of the following is the MOST likely cause of the message?（）AThe device needs a firmware updateBThe device needs an updated driver installedCThe plugged in device is too slow for the USB port speedDThe device is incompatible with the installed version of Windows
单选题You have a computer running Windows 2000 Professional. You have purchased a new USB scanner. You attached it to the USB port. When you go to device manager to see the status of the USB port， You did not find any USB controller there. You then reboot your system and go to system BIOS settings and enable the USB Controller. But it is still missing. What should you do to resolve this problem？（）AUpdate the scanner drivers using certified driversBEnable the USB port in the computers BIOS again.CContact the maker or vendor for you system and obtain the current version of BIOS.DEnable the USB hub controller in device manager.EReinstall the USB device driver and disable the USB error detection
单选题You have configured the Odyssey Access Client with a profile which has the "Disable Server Verification" setting cleared.What will be the result if the device certificate on the MAG Series device has expired and the user attempts to authenticate?（）AThe user will be instructed to call the network administrator.BThe user will fail authentication.CThe user will be prompted to install a new device certificate on the MAG Series device.DThe user will successfully authenticate and have full network access.
单选题Your company has a server that runs Windows Server 2008 R2. The server is configured as a remoteaccess server. The external firewall has TCP port 80 and TCP port 443 open for remoteconnections. You have a home computer that runs Windows 7. You need to establish secure remote accessconnection from the home computer to the remote access server. Which type of connection should you configure? （）AIPSECBL2TPCPPTPDSSTP
单选题You are the administrator of Company's network. You wish to connect your Windows 2000 Professional computer to a new TCP/IP based Plug and Play compliant print device. The print device is included on the current Hardware Compatibility List (HCL) When you attempt to create a new TCP/IP printer port, you receive the following message: "Specified Port cannot be added. The port already exists." You want to create a new TCP/IP printer port. What should you do? （）AChange the LPT port setting to enable legacy Plug and Play detection on your computer.BDelete the existing printer port.CChange the LPT port setting to bidirectional in the BIOS on your computer.DObtain and install the WDM-compliant device drivers and printing software for the printer.
单选题A remote user is attempting to install a new external storage device on their computer. The user reports they only have one port open on the back of the device and the port is similar to the USB port their mouse is connected to. The port has a bevel on one side and is slightly larger than the USB port. Which of the following connector types is MOST likely being described?（）AIEEE 1394BUSB 2.0CPCMCIADParallel
单选题A just announced two-port Ethernet card has been installed on a system and it is not recognized. On the HMC the slot shows empty. The device driver has been installed and cfgmgr runs normally. What is the most appropriate action to solve this problem?（）AUpdate the HMC softwareBUpdate the system firmwareCRe-install the device driverDFlash update the two-port card
单选题A user has a small network of four computers that they want to connect to a single cable modem. Which of the following devices would allow the user to do this？（）AFour port switchBFour port wireless routerCFour port WAPDFour port hub