单选题A new segment needs to be added to a network to provide access for 64 servers. Which of thefollowing subnets will provide the needed access and still conserve IP addresses?（）A192.168.1.0/26B192.168.1.0/23C192.168.1.0/24D192.168.1.0/25
单选题
A new segment needs to be added to a network to provide access for 64 servers. Which of thefollowing subnets will provide the needed access and still conserve IP addresses?（）
A
192.168.1.0/26
B
192.168.1.0/23
C
192.168.1.0/24
D
192.168.1.0/25
参考解析
解析：
暂无解析
相关考题：
You are the administrator for your company's network. The network is configured as shown in the exhibit.You want to install Windows 2000 Professional on 20 new PXE-compliant computers on the marketing segment of your network. The new computers do not have operating systems installed.You create a RIS image. You load the image onto the RIS server. You then start the new computers.You find that the new computers cannot connect to the RIS server. You verify that the new computers cannot connect to the RIS server. You verify that the existing client computers in the network can connect to the network servers, including the RIS server. You want to enable the new computers to connect to the RIS server.What should you do?A．Add a Windows 2000 Server computer running WINS to the network.B．Add a Windows 2000 Server computer running DHCP to the network.C．Add the domain Everyone group to the RIS OS image security settings.D．Place the new computers on the same segment as the RIS server.
Mike, a technician, is replacing a wireless router on an existing small office home office (SOHO) network. The SSID, WPA and DHCP information has been correctly added. Which of the following must also be addressed?（）A. The administrative password needs to be changed.B. The TKIP option needs to be enabled.C. The WEP key needs to be changed.D. Wireless access points need to be added.
A new segment needs to be added to a network to provide access for 64 servers. Which of thefollowing subnets will provide the needed access and still conserve IP addresses?() A.192.168.1.0/26B.192.168.1.0/23C.192.168.1.0/24D.192.168.1.0/25
A new VLAN needs to be created for an existing network. Which of the following are the minimum tasks that must be accomplished in order to create the new VLAN?() A. The VLAN must be createdB. The VLAN must be namedC. An IP address and subnet mask must be configured for the new VLAND. The desired ports must be added to the new VLANE. The VLAN must be added to the existing VTP Domain
A new subnet with 12 hosts has been added to the network. Which subnet address should this network use to provide enough useable addresses while wasting the fewest addresses()。 A.192.168.10.80/28B.192.168.10.80/29C.192.168.10.96/28D.192.168.10.96/29
The LAN needs are expanding at the Testking corporate office, which is quickly growing. You are instructed to enlarge the area covered by a single LAN segment on the TestKing network.Which of the following are layer 1 devices that you can use?（）A、A switch.B、A router.C、A network adapter card.D、A hub.E、A repeater.
A new VLAN needs to be created for an existing network. Which of the following are the minimum tasks that must be accomplished in order to create the new VLAN?（）A、The VLAN must be createdB、The VLAN must be namedC、An IP address and subnet mask must be configured for the new VLAND、The desired ports must be added to the new VLANE、The VLAN must be added to the existing VTP Domain
A switch has been configured with two vlans and is connected to a router with a trunk for inter-vlan routing.OSPF has been configured on the router，as the routing protocol for the network.Which statement about thisnetwork is true？（）A、For the two vlans to communicate，a network statement for the trunk interface needs to be added to the OSPF configuration.B、For the two vlans to communicate， a network statement for each subinterface needs to be added to the OSPF configuration.C、Direct inter-vlan communication does not require OSPFD、OSPF cannot be used if router-on-a-stick is configured on the router
New switches have been purchased for a network upgrade. The objective for the network design emphasizes efficient, error-free transport instead of fast transport.Which switching mode should be configured on the new switches to provide error-free transport to the network? （）A、cut-throughB、fragment-freeC、frame-filteringD、store-and-forwardE、802.1q forwardingF、VTP transparent mode
A new department is formed and a new section of the building is being built out for them. All 50 new employees will need access to the wireless network. Which of the following should be completed to allow these new employees access to the wireless network?（）A、Frequency settings should be changedB、Additional WAPs should be installedC、Channels should be changedD、VLANs should be added
A new subnet with 12 hosts has been added to the network. Which subnet address should this network use to provide enough useable addresses while wasting the fewest addresses（）。A、192.168.10.80/28B、192.168.10.80/29C、192.168.10.96/28D、192.168.10.96/29
A new segment needs to be added to a network to provide access for 64 servers. Which of thefollowing subnets will provide the needed access and still conserve IP addresses?（）A、192.168.1.0/26B、192.168.1.0/23C、192.168.1.0/24D、192.168.1.0/25
Mike, a technician, is replacing a wireless router on an existing small office home office (SOHO) network. The SSID, WPA and DHCP information has been correctly added. Which of the following must also be addressed?（）A、The administrative password needs to be changed.B、The TKIP option needs to be enabled.C、The WEP key needs to be changed.D、Wireless access points need to be added.
A technician needs to install additional access points for a new high speed connection being added in the new office space. Which of the following will MOST likely be installed to allow additional CAT5 cable connections?（）A、Smart JackB、DemarcC、110 BlockD、66 Block
A server in the production environment monitors output from various sensors along an assembly line.New equipment is being added to the line that will require monitoring.The server administrator needs to add additional inputs to the server for this new equipment. Which of the following input types is MOST likely required？（）A、EIDEB、SATAC、SerialD、Video
A customer needs to create a number of LPARs on a new POWER6 server with some LPARs requiring a dedicated network and other LPARs utilizing Virtual Ethernet via a VIO server. Which limitation must be considered when planning the system configuration?（）A、A VIO server requires a dedicated LHEA port.B、There is a limit of 32 LPARs per virtual LAN.C、Two VIO servers will be required. A single VIO server can only provide virtual storage or virtual Ethernet.D、Two VIO servers will be required. One to provide virtual networking and another to provide dedicated networking.
Your company is designing its public network. The network will use an IPv4 range of 131.107.40.0/22.The network must be configured as shown in the following exhibit.You need to configure subnets for each segment. Which network addresses should you assign？（）A、Segment A: 131.107.40.0/23 Segment B: 131.107.42.0/24 Segment C: 131.107.43.0/25 Segment D: 131.107.43.128/27B、Segment A: 131.107.40.0/25 Segment B: 131.107.40.128/26 Segment C: 131.107.43.192/27 Segment D: 131.107.43.224/30C、Segment A: 131.107.40.0/23 Segment B: 131.107.41.0/24Segment C: 131.107.41.128/25 Segment D: 131.107.43.0/27D、Segment A: 131.107.40.128/23 Segment B: 131.107.43.0/24Segment C: 131.107.44.0/25 Segment D: 131.107.44.128/27
You have a single network segment. All servers run Windows Server 2003 Service Pack 2 (SP2). You have a DHCP server named Server1. Client computers receive IP addresses from Server1. You add a second network segment separated by a RFC 1542-compliant router. You need to ensure that computers in the new network segment can receive their IP configurations from Server1. You make the appropriate configuration changes on the router. What should you do on Server1?（）A、Create a new scope.B、Configure a DHCP Relay Agent.C、Add an Extensions Path scope option.D、Create a new exclusion range in the existing scope.
单选题New switches have been purchased for a network upgrade. The objective for the network design emphasizes efficient, error-free transport instead of fast transport.Which switching mode should be configured on the new switches to provide error-free transport to the network? （）Acut-throughBfragment-freeCframe-filteringDstore-and-forwardE802.1q forwardingFVTP transparent mode
单选题A new segment needs to be added to a network to provide access for 64 servers. Which of thefollowing subnets will provide the needed access and still conserve IP addresses?（）A192.168.1.0/26B192.168.1.0/23C192.168.1.0/24D192.168.1.0/25
单选题An administrator has added a new access point to the network to provide additional coverage. A heat-map survey shows coverage now extends beyond company property and is interfering with other wireless networks in the area. How should the administrator modify the new installation to stop the interference?（）ATurn down the transmission strength of the access point.BReplace the antenna with a smaller one.CChange the wireless password to a more complex one.DChange the SSID of the access point
单选题A technician needs to install additional access points for a new high speed connection being added in the new office space. Which of the following will MOST likely be installed to allow additional CAT5 cable connections?（）ASmart JackBDemarcC110 BlockD66 Block
单选题A new subnet with 12 hosts has been added to the network. Which subnet address should this network use to provide enough useable addresses while wasting the fewest addresses（）。A192.168.10.80/28B192.168.10.80/29C192.168.10.96/28D192.168.10.96/29
多选题A new VLAN needs to be created for an existing network. Which of the following are the minimum tasks that must be accomplished in order to create the new VLAN?（）AThe VLAN must be createdBThe VLAN must be namedCAn IP address and subnet mask must be configured for the new VLANDThe desired ports must be added to the new VLANEThe VLAN must be added to the existing VTP Domain
单选题An administrator has completed the installation of a new WLAN. Which of the following configuration management documents needs to be updated?（）ALogical network diagramBHistory logsCBaseline configurationsDWiring schematics
单选题A customer needs to create a number of LPARs on a new POWER6 server with some LPARs requiring a dedicated network and other LPARs utilizing Virtual Ethernet via a VIO server. Which limitation must be considered when planning the system configuration？（）AA VIO server requires a dedicated LHEA port.BThere is a limit of 32 LPARs per virtual LAN.CTwo VIO servers will be required. A single VIO server can only provide virtual storage or Virtual Ethernet.DTwo VIO servers will be required. One to provide virtual networking and another to provide dedicated networking.
单选题A switch has been configured with two vlans and is connected to a router with a trunk for inter-vlan routing.OSPF has been configured on the router，as the routing protocol for the network.Which statement about thisnetwork is true？（）AFor the two vlans to communicate，a network statement for the trunk interface needs to be added to the OSPF configuration.BFor the two vlans to communicate， a network statement for each subinterface needs to be added to the OSPF configuration.CDirect inter-vlan communication does not require OSPFDOSPF cannot be used if router-on-a-stick is configured on the router
单选题Mike, a technician, is replacing a wireless router on an existing small office home office (SOHO) network. The SSID, WPA and DHCP information has been correctly added. Which of the following must also be addressed?（）AThe administrative password needs to be changed.BThe TKIP option needs to be enabled.CThe WEP key needs to be changed.DWireless access points need to be added.