单选题New switches have been purchased for a network upgrade. The objective for the network design emphasizes efficient, error-free transport instead of fast transport.Which switching mode should be configured on the new switches to provide error-free transport to the network? ()Acut-throughBfragment-freeCframe-filteringDstore-and-forwardE802.1q forwardingFVTP transparent mode

单选题
New switches have been purchased for a network upgrade. The objective for the network design emphasizes efficient, error-free transport instead of fast transport.Which switching mode should be configured on the new switches to provide error-free transport to the network? ()
A

cut-through

B

fragment-free

C

frame-filtering

D

store-and-forward

E

802.1q forwarding

F

VTP transparent mode


参考解析

解析: 暂无解析

相关考题:

A new switch is being installed in the Ezonexam network and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this? (Choose all that apply).A.You must set each end of the trunk line to IEEE 802.1e encapsulation.B.You must set the same VTP management domain name on both switches.C.You must set all ports on the two switches as access ports.D.You must configure one of the switches as a VTP server.E.You must use a rollover cable to connect the two switches.

When is a switched network that is running the Spanning Tree Protocol considered to be fully converged?A.when all switches have the same BID as the root switchB.when all switches have received the MAC address of each neighboring switchC.when every enabled switch port has been assigned a unique identifierD.when every operating switch port is in either the blocking or forwarding stateE.when all switches are in either client, server, or transparent mode

You are the network administrator setting up the IP network for a new branch office. You need at least 5 networks with 25 hosts each. You have been allocated a /24 network.Which prefix length will satisfy the given requirements?()A./24B./26C./27D./28

The network administrator has just finished installing a new 10/100/1000 switch, but receives reports from the server administrator that servers connected to the new switch seem to be experiencing slow LAN connections. The network administrator checks the port connecting the new switch to the core switch and sees the following information:Which of the following is the MOST likely cause of the slow connections?()A. The servers have not had VLAN tagging enabled on their NICs.B. Speed and duplex have not been set.C. VLAN tagging was not set on the trunk.D. The servers have been connected with CAT5 cable.

When ordering switches for a new building, which of the following is the BEST way for the technician to determine the number of switches to put in each network closet?() A. Review the architectural plans to see how many drops go to each closet.B. Count the number of rooms near each closet and standardize eight drops per room.C. Wireless is the new standard and no network switches will be needed in the building,D. Count the number of phone ports and configure two network ports for each phone port.

New switches have been purchased for a network upgrade. The objective for the network design emphasizes efficient, error-free transport instead of fast transport.Which switching mode should be configured on the new switches to provide error-free transport to the network? ()A. cut-throughB. fragment-freeC. frame-filteringD. store-and-forwardE. 802.1q forwardingF. VTP transparent mode

You have an Ethernet network. Which of the conditions below can lead to increased congestion on your network?() A. The use of Full-Duplex Mode.B. The Creation on New Collision Domains.C. The Creation on New Broadcast Domains.D. The Addition of Hubs to the Network.E. The use of switches in the Network.F. The Amount of ARP or IPX SAP Traffic.

The revolution of machinery could __________without a new source of both movable and constant power in the new century.A. be born B. not have been born C. have been born D. have born

A switch that is to be added to the production network has been preconfigured (trunks, VLANs, VTP, and STP) and was tested in your lab. After installing the switch into the network, the entire network went down.  What might explain what happened? ()A、The new switch happened to be running Cisco Catalyst operating system, while the other network switches were running Cisco IOS Software.B、The configuration revision of the new switch was higher than the configuration revision of the production VTP domain.C、The link costs on the new switch are set to a high value, causing all ports on the new switch to go into a forwarding mode and none into blocking mode, thereby causing a spanning-tree loop.D、The ports connecting to the two switches have been configured incorrectly. One side has the command switchport mode access and the other switchport mode trunk.

New switches have been purchased for a network upgrade. The objective for the network design emphasizes efficient, error-free transport instead of fast transport.Which switching mode should be configured on the new switches to provide error-free transport to the network? ()A、cut-throughB、fragment-freeC、frame-filteringD、store-and-forwardE、802.1q forwardingF、VTP transparent mode

You have an Ethernet network. Which of the conditions below can lead to increased congestion on your network?()A、The use of Full-Duplex Mode.B、The Creation on New Collision Domains.C、The Creation on New Broadcast Domains.D、The Addition of Hubs to the Network.E、The use of switches in the Network.F、The Amount of ARP or IPX SAP Traffic.

You have just purchased a new Cisco 3560 switch running the enhanced IOS and need configure  it to be installed in a high availability network. On a 3560 EMI switch,  which three types of  interfaces can be used to configure HSRP?()A、 SVI interfaceB、 Access portC、 EtherChannel port channelD、 Loopback interfaceE、 Routed portF、 BVI interface

We confirm ____ purchased 2,000 MP3 Players ____ you.A、have, toB、having, fromC、to have, fromD、have been to

Before inserting a new switch in the network,the network administrator checks that the VTP domain name is correct,the VTP mode is set to server, and revision is lower than the switches in the network. The administrator then configures interfaces and trunks,erases existing VLANs,and connects the switch to the network. Following that procedure,there is no connectivity in the network. What is a possible cause of this problem?()A、Because the configuration revision of the new switches is lower than the rest of the network, it can change the VLAN database of the other switches.B、As a VTP server, the new switch deleted all VLANs of the network.C、Erasing VLANs increases the VTP configuration revision.D、Since the configuration revision of the network is higher than the new switch, the VLAN database was automatically synchronized.

A new switch is installed in the Testking network. This switch is to be configured sothat VLAN information will be automatically distributed to all the other Cisco Catalyst switches in the network. Which of the conditions below have to be met in order for this to occur?()A、The switch that will share the VLAN information must be in the VTP Server mode.B、The switches must be in the same VTP domain.C、The switch that will share the VLAN information must be configured as the root bridge.D、The switches must be configured to use the same VTP version.E、The switches must be configured to use the same STP version.F、The switches must be configured to use the same type of ID tagging.G、The switches must be connected over VLAN trunks.

A network administrator is explaining VTP configuration to a new technician. What should the network administrator tell the new technician about VTP configuration?()A、A switch in the VTP client mode cannot update its local VLAN database.B、A trunk link must be configured between the switches to forward VTP updates.C、A switch in the VTP server mode can update a switch in the VTP transparent mode.D、A switch in the VTP transparent mode will forward updates that it receives to other switches.E、A switch in the VTP server mode only updates switches in the VTP client mode that have a higher VTP revision number.F、A switch in the VTP server mode will update switches in the VTP client mode regardless of the configured VTP domain membership.

An administrator is planning an upgrade of a major software package on an application server.The software has been identified, the project approved and the upgrade purchased. Which of the following steps should the administrator take NEXT?()A、Create a test environment for the new version.B、Determine system requirements for the upgrade.C、Request bids from other competing vendors in the product space.D、Document the upgrade.

When ordering switches for a new building, which of the following is the BEST way for the technician to determine the number of switches to put in each network closet?()A、Review the architectural plans to see how many drops go to each closet.B、Count the number of rooms near each closet and standardize eight drops per room.C、Wireless is the new standard and no network switches will be needed in the building,D、Count the number of phone ports and configure two network ports for each phone port.

A customer purchased a new IBM xSeries x445.  They already have a non-IBM industry standard rack with 14U of open space that is being considered to house the new server.  The rack houses an existing UPS unit for the entire rack.  Which of the following questions is most important to ensure that the power in the datacenter environment is ready for the initial install?()A、Have optional Fibre Channel and Ethernet switches been installed in the server?B、What is the available kVA value of the UPS?C、Are there sufficient empty socket outlets in the UPS?D、What is the impact on the power consumption of the data center cooling system?

You are the network administrator setting up the IP network for a new branch office. You need at least 5 networks with 25 hosts each. You have been allocated a /24 network.Which prefix length will satisfy the given requirements?()A、/24B、/26C、/27D、/28

多选题You have an Ethernet network. Which of the conditions below can lead to increased congestion on your network?()AThe use of Full-Duplex Mode.BThe Creation on New Collision Domains.CThe Creation on New Broadcast Domains.DThe Addition of Hubs to the Network.EThe use of switches in the Network.FThe Amount of ARP or IPX SAP Traffic.

单选题A switch that is to be added to the production network has been preconfigured (trunks, VLANs, VTP, and STP) and was tested in your lab. After installing the switch into the network, the entire network went down.  What might explain what happened? ()AThe new switch happened to be running Cisco Catalyst operating system, while the other network switches were running Cisco IOS Software.BThe configuration revision of the new switch was higher than the configuration revision of the production VTP domain.CThe link costs on the new switch are set to a high value, causing all ports on the new switch to go into a forwarding mode and none into blocking mode, thereby causing a spanning-tree loop.DThe ports connecting to the two switches have been configured incorrectly. One side has the command switchport mode access and the other switchport mode trunk.

单选题When is a switched network that is running the Spanning Tree Protocol considered to be fully converged?()Awhen all switches have the same BID as the root switchBwhen all switches have received the MAC address of each neighboring switchCwhen every enabled switch port has been assigned a unique identifierDwhen every operating switch port is in either the blocking or forwarding stateEwhen all switches are in either client, server, or transparent mode

单选题A customer purchased a new IBM xSeries x445.  They already have a non-IBM industry standard rack with 14U of open space that is being considered to house the new server.  The rack houses an existing UPS unit for the entire rack.  Which of the following questions is most important to ensure that the power in the datacenter environment is ready for the initial install?()AHave optional Fibre Channel and Ethernet switches been installed in the server?BWhat is the available kVA value of the UPS?CAre there sufficient empty socket outlets in the UPS?DWhat is the impact on the power consumption of the data center cooling system?

单选题You have just created a new VLAN on your network for inter-VLAN routing.  What is one step that you should include in your VLAN-based implementation and verification plan?()AVerify that different native VLANs exist between two switches for security purposes.BVerify that the switch is configured to allow for trunking on the switch ports.CVerify that each switch port has the proper IP address space assigned to it for the new VLAN. DVerify that the VLAN virtual interface has been correctly created and enabled.

单选题You have just created a new VLAN on your network.  What is one step that  you should include in your VLAN based implementation and verification plan? ()AVerify that different native VLANs exist between two switches for security purposes.BVerify that the VLAN was added on all switches with the use of the show vlan command. CVerify that the switch is configured to allow for trunking on the switch ports.DVerify that each switch port has the correct IP address space assigned to it for the new VLAN.

多选题You have just purchased a new Cisco 3560 switch running the enhanced IOS and need configure  it to be installed in a high availability network. On a 3560 EMI switch,  which three types of  interfaces can be used to configure HSRP?()ASVI interfaceBAccess portCEtherChannel port channelDLoopback interfaceERouted portFBVI interface