多选题Routers R1, R2, R3, and R4 connect to the same 10.10.10.0/24 LAN- based subnet. OSPF is fully working in the subnet. Later, R5, whose OSPF priority is higher than the other four routers, joins the subnet. Which of the following are true about the OSPF database exchange process over this subnet at this point?（）AR5 will send its DD, LSR, and LSU packets to the 224.0.0.5 all - DR - routers multicast address.BR5 will send its DD, LSR, and LSU pack ets to the 224.0.0.6 all - DR - routers multicast address.CThe DR will inform R5 about LSAs by sending its DD, LSR, and LSU packets to the 224.0.0.6 all- SPF - routers multicast address.DThe DR will inform R5 about LSAs by sending its DD, LSR, and LSU pa ckets to the 224.0.0.5 all- SPF - routers multicast address.
多选题
Routers R1, R2, R3, and R4 connect to the same 10.10.10.0/24 LAN- based subnet. OSPF is fully working in the subnet. Later, R5, whose OSPF priority is higher than the other four routers, joins the subnet. Which of the following are true about the OSPF database exchange process over this subnet at this point?（）
A
R5 will send its DD, LSR, and LSU packets to the 224.0.0.5 all - DR - routers multicast address.
B
R5 will send its DD, LSR, and LSU pack ets to the 224.0.0.6 all - DR - routers multicast address.
C
The DR will inform R5 about LSAs by sending its DD, LSR, and LSU packets to the 224.0.0.6 all- SPF - routers multicast address.
D
The DR will inform R5 about LSAs by sending its DD, LSR, and LSU pa ckets to the 224.0.0.5 all- SPF - routers multicast address.
参考解析
解析：
暂无解析
相关考题：
在电阻应变仪的全桥电路中,R1、R2、R3、和R4按顺时针排列,当()时,即可起到温度补偿的作用。 A、R1和R2为测量工作应变片，R3和R4为温度补偿应变片B、R1和R3为测量工作应变片，R2和R4为温度补偿应变片C、R1和R4为测量工作应变片，R2和R3为温度补偿应变片D、R2和R3为测量工作应变片，R1和R4为温度补偿应变片
Given the network diagram, which routers currently make up the IS － IS backbone?() A. R3,R4,R6B. R2,R3,R6,R7C. R1 through R8D. R3,R4,R5,R6E. R2,R3,R4,R6,R7
Refer to the exhibit. Autonomous systems 200 and 300 have EBGP sessions established with their directly connected routers in au tonomous system 100. IGP has been configured on all routers in autonomous system 100 and they successfully exchange routing updates. Traffic originated in autonomous system 200 cannot reach the destination autonomous system 300. What configuration shoul d be done on the routers in autonomous system 100 in order for the traffic coming from autonomous system 200 to be forwarded to autonomous system 300?（）A. IBGP session must be established between routers R1 R2 and R2 R3, and the synchronization must be turned off.B. IBGP speakers within autonomous 100 must be fully meshed, and the synchronization must be turned on.C. IBGP session must be established between routers R1 R2 and R2 R3, and the synchronization must be turned on.D. IBGP session mu st be established between routers R1 and R3, and the synchronization must be turned off.E. IBGP speakers within autonomous 100 must be fully meshed, and the synchronization must be turned off.F. IBGP session must be established between routers R1 and R3, and the synchronization must be turned on.
Refer to the exhibit. On the basis of the configuration that is provided, how would the BGP updates that come from router R1 be replicated inside autonomous system 65200?() A. All BGP updates that are received on router R 2 will be sent to routers R3 and R4. Routers R3 and R4 will then forward those BGP updates to router R5B. None of the BGP updates that are received on router R2 will ever be received by router R5C. All BGP updates that are received on router R2 will not be sent to routers R3 and R4D. All BGP updates that are received on router R2 will be sent directly to router R5
Refer to the exhibit. EIGRP is configured with the default configuration on all routers. Auto summariz ation is enabled on routers R2 and R3, but it is disabled on router R1.Which two EIGRP routes will be seen in the routing table of router R3?（）A. 10.0.0.0/8B. 172.16.10.0/24C. 172.16.0.0/24D. 10.10.10.0/24E. 172.16.0.0/16F. 10.10.0.0/16
R1(AS1)－－－－－－R2(AS2)－－－－－R3(AS2)－－－－R4(AS2),R1在AS1,R2,R3,R4在AS2,R1和R2建EBGP,R2和R3IBGP,R3和R4IBGP,产生BGP路由从R1传给R2,问这条路有会不会在R4上出现,如果不会,怎么解决.
?某计算机系统中共有3个进程P1、P2和P3，4类资源r1、r2、r3和r4。其中r1和r3每类资源只有1个实例，r2资源有2个实例，r4有3个实例。 当前的资源分配状态如下：E={P1，r1，P2，r3，r2，P1，r1，P2，r2，P2，r3，P3}若进程P3申请一个r2类资源，则系统可能会发生下列哪一种现象？A.A.死锁B.B.无死锁C.C.活锁D.D.饥饿
下列关于普通投资者风险承受能力等级与产品或服务风险等级的匹配的说法，正确的有( )。A.C2类投资者可购买或接受R1、R2风险等级的产品或服务B.C3类投资者可购买或接受R1、R2、R3风险等级的产品或服务C.C4类投资者可购买或接受R1、R2、R3、R4风险等级的产品或服务D.C5类投资者可购买或接受R1、R2、R3、R4、R5风险等级的产品或服务
普通投资者风险承受能力等级应与产品或服务风险等级的匹配，下列符合规定标准的是（ ）。A.C1类投资者可购买或接受R1、R2、R3、R4、R5风险等级的产品或服务B.C3类投资者可购买或接受R1、R2、R3、R4风险等级的产品或服务C.C5类投资者可购买或接受R1、R2、R3、R4、R5风险等级的产品或服务D.C2类投资者可购买或接受R1、R2、R3风险等级的产品或服务
r1 is the hub ， multipoint mode subinterface， r2 and r3 is spoke， when r2 down at the spoke， What will r1 react？how about r3？
程序段N10 R1=30 R2=32 R3=50 R4=20；N20 G00 X=R2*SIN（R1）+R4 Z=R2*COS（R1）+R3；中，只对X坐标值有影响的R参数是（）（SIEMENS系统）。A、R1B、R2C、R3D、R4
Ten routers, R1 through R10, connect in a partial mesh over Frame Relay. For the mesh, R1 and R2 have PVCs connected to all other routers, but Routers R3 through R10 act as branch routers, with only two PVCs - one to R1 and one to R2. The routers u se IP subnet 10.1.1.0/24, with addresses 10.1.1.1, 10.1.1.2, and so on, through 10.1.1.10, respectively. The routers all use Inverse ARP to learn Frame Relay mapping information. All routers use a multipoint subinterface with network type point - tomultip oint nonbroadcast. A co - worker's implementation plan lists lots of configuration commands related to this design. The design states that all hosts should be able to ping all other hosts. Which commands are required for proper functioning of OSPF in this case?（）A、frame - relay map commands on R3 - R10 referencing the other routers in this groupB、Nine OSPF neighbor commands on each routerC、Nine OSPF neighbor commands on R1 and R2, with only two such commands on R3 - R10D、R1 and R2 with ip ospf prio rity 1 commands to ensure they become DR and BDRE、R3 - R10 with ip ospf priority 0 commands to ensure they do not become DR or BDR
Routers R1, R2, R3, and R4 connect to the same 10.10.10.0/24 LAN- based subnet. OSPF is fully working in the subnet. Later, R5, whose OSPF priority is higher than the other four routers, joins the subnet. Which of the following are true about the OSPF database exchange process over this subnet at this point?（）A、R5 will send its DD, LSR, and LSU packets to the 224.0.0.5 all - DR - routers multicast address.B、R5 will send its DD, LSR, and LSU pack ets to the 224.0.0.6 all - DR - routers multicast address.C、The DR will inform R5 about LSAs by sending its DD, LSR, and LSU packets to the 224.0.0.6 all- SPF - routers multicast address.D、The DR will inform R5 about LSAs by sending its DD, LSR, and LSU pa ckets to the 224.0.0.5 all- SPF - routers multicast address.
多选题Refer to the graphic. R1 is unable to establish an OSPF neighbor relationship with R3. What are possible reasons for this problem?（）AAll of the routers need to be configured for backbone Area 1.BR1 and R2 are the DR and BDR, so OSPF will not establish neighbor adjacency with R3.CA static route has been configured from R1 to R3 and prevents the neighbor adjacency from being established.DThe hello and dead interval timers are not set to the same values on R1 and R3.EEIGRP is also configured on these routers with a lower administrative distance.FR1 and R3 are configured in different areas.
多选题Ten routers, R1 through R10, connect in a partial mesh over Frame Relay. For the mesh, R1 and R2 have PVCs connected to all other routers, but Routers R3 through R10 act as branch routers, with only two PVCs - one to R1 and one to R2. The routers u se IP subnet 10.1.1.0/24, with addresses 10.1.1.1, 10.1.1.2, and so on, through 10.1.1.10, respectively. The routers all use Inverse ARP to learn Frame Relay mapping information. All routers use a multipoint subinterface with network type point - tomultip oint nonbroadcast. A co - worker's implementation plan lists lots of configuration commands related to this design. The design states that all hosts should be able to ping all other hosts. Which commands are required for proper functioning of OSPF in this case?（）Aframe - relay map commands on R3 - R10 referencing the other routers in this groupBNine OSPF neighbor commands on each routerCNine OSPF neighbor commands on R1 and R2, with only two such commands on R3 - R10DR1 and R2 with ip ospf prio rity 1 commands to ensure they become DR and BDRER3 - R10 with ip ospf priority 0 commands to ensure they do not become DR or BDR
单选题在电阻应变仪的全桥电路中，R1、R2、R3和R4按顺时针排列，当（）时，即可起到温度补偿的作用。AR1和R2为测量工作应变片，R3和R4为温度补偿应变片BR1和R3为测量工作应变片，R2和R4为温度补偿应变片CR1和R4为测量工作应变片，R2和R3为温度补偿应变片DR2和R3为测量工作应变片，R1和R4为温度补偿应变片
多选题A company uses Routers R1 and R2 to connect to ISP1 and ISP2, respectively, with Routers I1 and I2 used at th e ISPs. R1 peers with I1 and R2; R2 peers with I2 and R1. R1 and R2 do not share a common subnet, relying on other routers internal to the Enterprise for IP connectivity between the two routers. Which of the following could be used to prevent potential routing loops in this design?（）AUsing an iBGP mesh inside the Enterprise coreBConfiguring default routes in the Enterprise pointing to both R1 and R2CRedistributing BGP routes into the Enterprise IGPDTunneling the packets for the i BGP connection between R1 and R2