单选题You have a login-path named "adamlocal" that was created by using the mysql_config_editor command. You need to check what is defined for this login_path to ensure that it is correct for you deployment. You execute this command: $mysql_config_editor print –login-path=adamlocal What is the expected output of this command?（）AThe command prints all parameter for the login-path. The password is replaced with starsBThe command prints the encrypted entry for the login-path. The is only possible to see if an entry existsCThe command prints all parameters for the login-path. The password is shown only when you provide the –password optionDThe command prints all parameters for the login-path. The password is printed in plain tex
单选题
You have a login-path named "adamlocal" that was created by using the mysql_config_editor command. You need to check what is defined for this login_path to ensure that it is correct for you deployment. You execute this command: $mysql_config_editor print –login-path=adamlocal What is the expected output of this command?（）
A
The command prints all parameter for the login-path. The password is replaced with stars
B
The command prints the encrypted entry for the login-path. The is only possible to see if an entry exists
C
The command prints all parameters for the login-path. The password is shown only when you provide the –password option
D
The command prints all parameters for the login-path. The password is printed in plain tex
参考解析
解析：
暂无解析
相关考题：
You have recently created a serializable class named Vehicle.The class is shown below:[Serializable]public class Vehicle{public string VIN;public string Make;public string Model;public string Year;}You are planning to create a custom formatter class to control the formatting of Vehicle objects when they are serialized.You need to ensure that is achieved with as little development effort as possible.What should you do?（）A.B.C.D.
You have recently created an application, and want to capture all debugging text messages generated by it.You would like these debugging messages to display on the command line. The application that you created contains the following code:Debug.WriteLine (Start the processing);Console.WriteLine (Generated by Console.WriteLine);Debug.WriteLine (End the processing);You need to ensure that you are able to capture all debugging messages to the command line.What should you do?（）A.B.C.D.
You would like to create a custom performance counter for an application that you created recently.To do this, you decide to create a custom category named ApplicationPerformance and a performance counter named HitNumber.You need to ensure that this counter is shared across numerous applications.What should you do?（）A.B.C.D.
You use—login－path to access a MySQL server on a Linux installation.Which statement is true about the – login－path option that is created by using mysql_config_editor?() A.All system users have access to the MySQL server via—login path localB.login-path can be used only for MySQL servers running on a local machineC.login-path allows you to provide login credentials without passing clear text passwords on the command lineD.When using – login-path to connect to a remote MySQL server, the remote server version must be 5.6 or later
You have a login-path named adamlocal that was created by using the mysql_config_editor command. You need to check what is defined for this login_path to ensure that it is correct for you deployment.You execute this command:$mysql_config_editor print –login-path=adamlocal What is the expected output of this command?（）A.The command prints all parameter for the login-path. The password is replaced with starsB.The command prints the encrypted entry for the login-path. The is only possible to see if an entry existsC.The command prints all parameters for the login-path. The password is shown only when you provide the –password optionD.The command prints all parameters for the login-path. The password is printed in plain tex
You delete content from a file named Speed.doc that is stored in the C:\Data folder. You edit 20 files in this folder over the next two days. You need to restore the version of the file that had the correct data. You also need to ensure that the other fiels in the folder remain unaffected.What should you do?（）A.AB.BC.CD.D
You need to check the EMP_EAST partition in the EMPLOYEES table for physical corruptions. You also need to verify that the rows belong to the correct partition. Which option could you use？（）A、 LogMinerB、 The DBNEWID utilityC、 The DBVERIFY utilityD、 The ANALYZE commandE、 The RMAN REPORT commandF、 The RMAN CROSSCHECK command.G、 The RMAN BLOCKRECOVER command.
You enter configuration mode with the configure command. You need to abort the changes that you have made and start again with a fresh copy of the active configuration. Which command should you use?（）A、rollback 0B、load activeC、reset configD、clear candidate config
You use—login-path to access a MySQL server on a Linux installation. Which statement is true about the – login-path option that is created by using mysql_config_editor?（）A、All system users have access to the MySQL server via—login path localB、login-path can be used only for MySQL servers running on a local machineC、login-path allows you to provide login credentials without passing clear text passwords on the command lineD、When using – login-path to connect to a remote MySQL server, the remote server version must be 5.6 or later
You want to drop the TBS1 tablespace from your database. You also want to delete the corresponding data files automatically， and not have to do it manually. What should you do？（）A、Use the DROP DATAFILE command.B、Use the DROP TABLESPACE command.C、Ensure that all database files are Oracle Managed Files before using the DROP TABLESPACE command.D、Ensure that the DB_FILE_CREATE_DEST initialization parameter is set before using the DROP TABLESPACE command.
You have lost all your RMAN backup set pieces due to a disk failure. Unfortunately， you have an automated cross-check script that also does a delete expired backupset command. You have restored all the backup set pieces from tape. What command would you use to get those backup set pieces registered in the recovery catalog and the control file of the database again？（） A、 register databaseB、 recover catalogC、 load backupsetD、 synch metadataE、 catalog start with
You have a login-path named "adamlocal" that was created by using the mysql_config_editor command. You need to check what is defined for this login_path to ensure that it is correct for you deployment. You execute this command: $mysql_config_editor print –login-path=adamlocal What is the expected output of this command?（）A、The command prints all parameter for the login-path. The password is replaced with starsB、The command prints the encrypted entry for the login-path. The is only possible to see if an entry existsC、The command prints all parameters for the login-path. The password is shown only when you provide the –password optionD、The command prints all parameters for the login-path. The password is printed in plain tex
You have lost all your database control files. To recover them， you are going to use the results of the alter database backup controlfile to trace command. Your datafiles and your online redo logs are all intact. Which of the following is true regarding your recovery？（） A、 You will need to open the database with the resetlogs command.B、 All you need to do is execute the trace file from SQL*Plus and it will perform the recovery for you.C、 You will use the resetlogs version of the create controlfile command.D、 You will use the noresetlogs version of the create controlfile command.E、 You will use the trace file to create a backup control file， and then you will recover the database with the recover database using backup controlfile command
Your network consists of a single Active Directory domain named contoso.com. All network servers run Windows Server 2003 Service Pack 2 (SP2).You have a DNS zone named contoso.com. The zone is configured to support dynamic updates. All servers in the company are registered in the contoso.com zone. You change the IP address of a server named Server1. From a server named Server2, you attempt to ping Server1 by host name, but the request fails. You successfully ping the new IP address of Server1.You need to ensure that Server2 can connect to Server1 by using the Server1 host name. Which two actions should you perform?（）A、On Server1, restart the Netlogon service. B、On Server2, run the Ipconfig /flushdns command. C、On Server1, run the Ipconfig /Registerdns command. D、On the DNS server, run the Dnscmd /zonerefresh contoso.com command.
You have a single Active Directory directory service forest with one domain. You have an existing top-level organizational unit （OU） named Sales. You are planning to create a new top-level OU named Training. The Sales and Training OUs must have the same security and auditing settings. You need to identify the security permissions and audit settings for the Sales OU so that you can delegate the same permissions for the Training OU. What should you do first？（）A、 Use the Delegation of Control Wizard.B、 Use the Security Configuration Wizard.C、 Run the dsacls command.D、 Run the xcacls command.
You have 10 stand alone servers taht run Windows Server 2008. You install WSUS on a server named Server1. You need to configure all of the servers to receive updates from Server1 What should you do（）？ A、configure the windows Update Settings on each server by using control panelB、Run the wuauclt.exe /detectnow command on each serverC、Run the wuauclt.exe /reauthorization command on each serverD、Configure the Windows Update settings on each server by using local group policy.
Your company’s security policy requires complex passwords. You have a comma delimited file named import.csv that contains user account information. You need to create user accounts in the domain by using the import.csv file. You also need to ensure that the new user accounts are set to use default passwords and are disabled. What should you do（）A、Modify the userAccountControl attribute to disabled. Run the csvde -i -k -f import.csv command. Run the DSMOD utilityB、Modify the userAccountControl attribute to accounts disabled. Run the csvde -f import.csv command. Run the DSMOD utilityC、Modify the userAccountControl attribute to disabled. Run the wscript import.csv command. Run the DSADD utilityD、Modify the userAccountControl attribute to disabled. Run the ldifde -i -f import.csv command. Run the DSADD utility
单选题Your network contains an Active Directory domain named contoso.com. You remove several computers from the network. You need to ensure that the host （A） records for the removed computers are automatically deleted from the contoso.com DNS zone. What should you do（）AConfigure dynamic updates.BConfigure aging and scavenging.CCreate a scheduled task that runs the Dnscmd /ClearCache command.DCreate a scheduled task that runs the Dnscmd /ZoneReload contoso.com command.
单选题You need to check the EMP_EAST partition in the EMPLOYEES table for physical corruptions. You also need to verify that the rows belong to the correct partition. Which option could you use？（）A LogMinerB The DBNEWID utilityC The DBVERIFY utilityD The ANALYZE commandE The RMAN REPORT commandF The RMAN CROSSCHECK command.G The RMAN BLOCKRECOVER command.
单选题You have a login-path named "adamlocal" that was created by using the mysql_config_editor command. You need to check what is defined for this login_path to ensure that it is correct for you deployment. You execute this command: $mysql_config_editor print –login-path=adamlocal What is the expected output of this command?（）AThe command prints all parameter for the login-path. The password is replaced with starsBThe command prints the encrypted entry for the login-path. The is only possible to see if an entry existsCThe command prints all parameters for the login-path. The password is shown only when you provide the –password optionDThe command prints all parameters for the login-path. The password is printed in plain tex
单选题You use—login-path to access a MySQL server on a Linux installation. Which statement is true about the – login-path option that is created by using mysql_config_editor?（）AAll system users have access to the MySQL server via—login path localBlogin-path can be used only for MySQL servers running on a local machineClogin-path allows you to provide login credentials without passing clear text passwords on the command lineDWhen using – login-path to connect to a remote MySQL server, the remote server version must be 5.6 or later
单选题Your company’s security policy requires complex passwords. You have a comma delimited file named import.csv that contains user account information. You need to create user accounts in the domain by using the import.csv file. You also need to ensure that the new user accounts are set to use default passwords and are disabled. What should you do（）AModify the userAccountControl attribute to disabled. Run the csvde -i -k -f import.csv command. Run the DSMOD utilityBModify the userAccountControl attribute to accounts disabled. Run the csvde -f import.csv command. Run the DSMOD utilityCModify the userAccountControl attribute to disabled. Run the wscript import.csv command. Run the DSADD utilityDModify the userAccountControl attribute to disabled. Run the ldifde -i -f import.csv command. Run the DSADD utility
单选题You have 10 stand alone servers taht run Windows Server 2008. You install WSUS on a server named Server1. You need to configure all of the servers to receive updates from Server1 What should you do（）？Aconfigure the windows Update Settings on each server by using control panelBRun the wuauclt.exe /detectnow command on each serverCRun the wuauclt.exe /reauthorization command on each serverDConfigure the Windows Update settings on each server by using local group policy.
单选题You have a single Active Directory directory service forest with one domain. You have an existing top-level organizational unit （OU） named Sales. You are planning to create a new top-level OU named Training. The Sales and Training OUs must have the same security and auditing settings. You need to identify the security permissions and audit settings for the Sales OU so that you can delegate the same permissions for the Training OU. What should you do first？（）A Use the Delegation of Control Wizard.B Use the Security Configuration Wizard.C Run the dsacls command.D Run the xcacls command.
单选题You have lost all your RMAN backup set pieces due to a disk failure. Unfortunately， you have an automated cross-check script that also does a delete expired backupset command. You have restored all the backup set pieces from tape. What command would you use to get those backup set pieces registered in the recovery catalog and the control file of the database again？（）A register databaseB recover catalogC load backupsetD synch metadataE catalog start with
单选题You enter configuration mode with the configure command. You need to abort the changes that you have made and start again with a fresh copy of the active configuration. Which command should you use?（）Arollback 0Bload activeCreset configDclear candidate config
单选题You have lost all your database control files. To recover them， you are going to use the results of the alter database backup controlfile to trace command. Your datafiles and your online redo logs are all intact. Which of the following is true regarding your recovery？（）A You will need to open the database with the resetlogs command.B All you need to do is execute the trace file from SQL*Plus and it will perform the recovery for you.C You will use the resetlogs version of the create controlfile command.D You will use the noresetlogs version of the create controlfile command.E You will use the trace file to create a backup control file， and then you will recover the database with the recover database using backup controlfile command