You want to drop the TBS1 tablespace from your database. You also want to delete the corresponding data files automatically， and not have to do it manually. What should you do？（）A、Use the DROP DATAFILE command.B、Use the DROP TABLESPACE command.C、Ensure that all database files are Oracle Managed Files before using the DROP TABLESPACE command.D、Ensure that the DB_FILE_CREATE_DEST initialization parameter is set before using the DROP TABLESPACE command.
You want to drop the TBS1 tablespace from your database. You also want to delete the corresponding data files automatically， and not have to do it manually. What should you do？（）
- A、Use the DROP DATAFILE command.
- B、Use the DROP TABLESPACE command.
- C、Ensure that all database files are Oracle Managed Files before using the DROP TABLESPACE command.
- D、Ensure that the DB_FILE_CREATE_DEST initialization parameter is set before using the DROP TABLESPACE command.
相关考题：
You are the administrator of two SQL Server 2000 computers. One of these servers contains a 4-GB database named marketing. You want to remove the marketing database from one server and add it to the other as quickly as possible.What should you do?A．Detach the database from the original server by using the sp_detach_db stored procedure. Copy the database and the transaction log files to the new server, and attach them by using the sp_attach_db stored procedure.B．Use the DTS export wizard to transfer all database objects from the original server to the new server. Drop the database from the original server.C．Run a full backup of the database on the original server. Create a new database named marketing on the new server. Restore the backup in the new marketing database. Drop the database from the original server.D．Shut down the original server. Copy the database and the transaction log files to the new server. Use the DISK INIT and DISK REFIT statements to attach the data file to the new server. Drop the database from the original server.
You are the administrator of a SQL Server 2000 computer. You are creating a data transformation services package. As the first step in this process, you need to load data from text files into a database table. These text files contain data on new stores that join your franchise. The text files list the data columns in the following format StoreID, StoreName, Address, City, State, PostalCode, ManagerID, StoreTypeID, FacilityID.The destination table is configured as shown in the exhibit.You want to load the data into the table as quickly as possible. What should you do?A．Use a Bulk Insert Task to read the data into a temporary table. Use an Execute SQL task to import the appropriate data into the destination table.B．Create and edit a format file to select the columns you want to import. Use a Bulk Insert Task, and then specify the format file to import the appropriate data into the destination table.C．Use a transform. data task to import the data. Use Microsoft ActiveX transformation scripts to write the appropriate data to the appropriate columns in the destination table.D．Create and edit a format file to select the columns you want to import. Use a transform. data task, and then specify the format file to import the appropriate data into the destination table.
You are the administrator of a SQL Server 2000 computer in your company's personnel department. Employee data is stored in a SQL Server 2000 database. A portion of the database schema is shown in the exhibit.You want to create a text file that lists these data columns in the following format title, FirstName, LastName, WorkPhone, PositionName, DepartmentName.You want to create the text file as quickly as possible. You do not expect to re-create this file, and you want to avoid creating new database objects if possible.What should you do?A．Use the bcp utility to export data from each table to a separate text file. Use format files to select the appropriate columns. Merge the data from each text file into a single text file.B．Create a view that joins data from all three tables include only the columns you want to appear in the text file. Use the bcp utility to export data from the view.C．Create a SELECT query that joins the data from the appropriate columns in the three tables. Add an INTO clause to the query to create a local temporary table. Use the bcp utility to export data from the local temporary table to a text file.D．Create a SELECT query that joins the data from the appropriate columns in the three tables. Add an INTO clause to the query to create a global temporary table. Use the bcp utility to export data from the global temporary table to a text file.
At database startup， you discover that one of the disks containing an index tablespace has been lost due to a media failure. A backup of the lost index tablespace is not available. You have all the necessary scripts to recreate the indexes. You need to re-create the indexes in a new index tablespace. Which action must you perform before re-creating the indexes？（）A、 Start the database in OPEN mode， and create a new index tablespace.B、 Start the database in OPEN mode， and drop the lost index tablespace from the database.C、Start the database in MOUNT mode， create a new index tablespace， and drop the lost index tablespace from the database.D、 Start the database in MOUNT mode， drop the lost index tablespace from the database， open the database， and create a new index tablespace.
You want the size of the tablespace to increase when it is full. Which option would you use？（）A、use automatic extent allocationB、disable threshold for the tablespaceC、use freelists to manage the free spaceD、use automatic segment space managementE、create the tablespace as a bigfile tablespaceF、use the RESIZE clause while creating the tablespaceG、enable AUTOEXTEND for at least one of the data files in the tablespace
You are planning to import customer data from the Customer table and the Country table in your SQL Server 2000 database into a SQL Server 2005 database. You want to ensure that during the import process，each value in the CountryCode column of the Customer table has a corresponding record in the CountryCode column in the Country table of the SQL Server 2005 database. You define a foreign key between these two tables. Thus，referential integrity will guarantee that the import routine fails if there are any records where a CountryCode value does not exist in the Country table but does exist in the Customer table. You need to ensure that the import process does not fail if records are encountered that do not exist in the Country table. What should you do？（）A、Drop the foreign key. Import the data by using the script. Re-create the foreign key.B、Create a CHECK constraint.C、Create a DML INSTEAD OF trigger that writes the failed records to a file or table.D、Create a DML AFTER trigger that writes the failed records to a file or table.
You lost a temporary file that belongs to the default temporary tablespace in your database. From the options provided， which approach would you take to solve the problem？ （）A、flash back the databaseB、import the temporary tablespace from the last exportC、restore all the data files and temporary files from the last full database backup and perform a recoveryD、not perform a recovery， but create a new temporary tablespace， make it the default temporary tablespace and then drop the old tablespace
Your database runs in NOARCHIVELOG mode， and is backed up every night using RMAN scripts. However， last night your assistant DBA performed a manual operating system backup， instead of running the scripts. Today your database crashed and you now want to use the backups from last night. What do you need todo？（）A、You need to perform the restore and recover operations manually, because the backup was made manually. B、First you need to resynchronize the catalog with the control file, and then you can use RMAN to recover the database. C、First you need to add the backup to the catalog using the CATALOG command, and then you can use RMAN to recover the database. D、You can just use RMAN and recover the database, because RMAN automatically updates the catalog with the backup information.
You lost the index tablespace in your database. You decided to re-create the index tablespace and the indexes in the tablespace. What methods can you use to re-create the indexes？（）A、 SQL scriptsB、 Recovery Manager （RMAN） scriptC、 Data PumpD、 SQL*LoaderE、 Flashback database
You have a read-only tablespace on read-only media. You want to perform a media recovery on the existing data files， but using a backup control file. The backup control file indicates that the status of the read-only tablespace was read/write when the control file was backed up. What should you consider？（）A、 take data files from the read-only tablespace offline before performing a recoveryB、 recovery using backup control file is not possible， so restore all the files from the last full database backup， and then open the databaseC、 drop the read-only tablespace and re-create the tablespace after recoveryD、 perform a recovery； status of the tablespace in control file will be changed automatically
You lost the index tablespace in your database. You decided to re/x7fcreate the index tablespace and the indexes in the tablespace. What methods can you use to re/x7fcreate the indexes？（）A、Data PumpB、SQL scriptsC、SQL*LoaderD、Flashback databaseE、Recovery Manager （RMAN） script
One of the tablespaces is read/x7fonly in your database. The loss of all control files forced you to re/x7fcreate the control file. Which operation do you need to perform after re/x7fcreating the control file and opening the database？（）A、drop and recreate the readonly tablespacesB、rename the readonly data files to their correct file namesC、change the tablespace status from read/write to readonlyD、recreate the readonly tablespace because it is automatically removed
You have a read/x7fonly tablespace on read/x7fonly media. You want to perform a media recovery on the existing data files， but using a backup control file. The backup control file indicates that the status of the read/x7fonly tablespace was read/write when the control file was backed up. What should you consider？（）A、drop the readonly tablespace and recreate the tablespace after recoveryB、take data files from the readonly tablespace offline before performing a recoveryC、perform a recovery; status of the tablespace in control file will be changed automaticallyD、recovery using backup control file is not possible， so restore all the files from the last full database backup， and then open the database
You lost a data file that belongs to an index tablespace in your database， which operates in ARCHIVELOG mode. Loss of the data file resulted in increased response time on your queries. Which two options would you use to solve this problem？ （）A、 Restore the lost data file from the backup， and then flash back the database.B、 Restore the data file pertaining to index tablespace， and then recover the tablespace.C、 Restore all the data files， and then perform an incomplete recovery to get the tablespace back.D、 Restore all the data files， and then perform an incomplete recovery using the backup control file.E、 Drop and re-create the index tablespace， and then re-create all of the indexes in that tablespace.
Your database contains two temporary tablespaces named TEMP and TEMP1. The TEMP tablespace is the default temporary tablespace for the database， and the TEMP1 tablespace was created at database creation. You want to increase the size of the tempfile for the TEMP tablespace and drop the TEMP1 tablespace from the database. The database is not using Oracle-Managed Files （OMF）. Which statement must you use to ensure that when you drop the TEMP1 tablespace from the database， its corresponding operating system file is also deleted？（）A、 DROP TABLESPACE temp1；B、 DROP TABLESPACE temp1 INCLUDING CONTENTS；C、 DROP TABLESPACE temp1 INCLUDING CONTENTS AND DATAFILES；D、 DROP TABLESPACE temp1 INCLUDING CONTENTS CASCADE CONSTRAINTS；
USER_DATA is a nonencrypted tablespace that contains a set of tables with data. You want to convert all existing data in the USER_DATA tablespace and the new data into the encrypted format. Which methodswould you use to achieve this?（）A、Use Data Pump to transfer the existing data to a new encrypted tablespaceB、Use ALTER TABLE MOVE to transfer the existing data to a new encrypted tablespaceC、Use CREATE TABLE AS SELECT to transfer the existing data to a new encrypted tablespaceD、Enable row movement for each table to be encrypted and then use ALTER TABLESPACE to encrypt the tablespaceE、Encrypt the USER_DATA tablespace using the ALTER TABLESPACE statement so that all the data in the tablespace is automatically encrypted
You want to put a specific tablespace called MY_DATA in hot backup mode so you can back it up. What command would you use？（） A、 alter tablespace MY_DATA begin backupB、 alter tablespace MY_DATA start backupC、 alter tablespace MY_DATA backup beginD、 alter MY_DATA begin backupE、 You cannot back up individual tablespaces
Every morning, you inspect your company's development and staging servers. You do this to ensure that the servers have the same versions of all files in your Web application.For security reasons, you can only access the staging server through FTP.You need to synchronize files from the staging server so that the staging server matches the development server.You want to achieve this goal by using the minimum amount of administrative effort. Which tool should you use?（） A、FTPB、XCOPYC、the Publish Web toolD、the Copy Web tool
You install Windows 2000 Professional on your portable computer. You install an SCSI and PC card adapter, that you can use in the office to use color scanner. You use a docking station for your computer when you are in the office. You want to maximize the battery performance for your portable computer. You also want to prevent the driver from loading whenever you are away from the office. What should you do?（）A、When away from the office use Device Manager to remove the adapter. B、When away from the office configure the startup properties for the adapter to be automatic. C、Remove the computer from the docking station and start Windows 2000 Professional to disable the SCSI PC card adapter device for the current profile.D、Remove the computer from the docking station and start Windows 2000 Professional, use Device Manager to remove SCSI PC card adapter device.
You are the administrator of your company's network. You are preparing to deploy 20 new Windows 2000 Professional computers on your network. You want to be able to recover from disk failures and corrupt system files on the new computers. You want to configure the computers to automatically update their system configuration and emergency repair files on a scheduled bases. What should you do?（）A、Use the at command to schedule a weekly job to back up the boot partition.B、Use the at command to schedule a weekly job to run the system file checker.C、Use Windows backup to schedule a backup of the System State Data.D、Use Windows backup to schedule a backup of the system partition and the boot partition.
You configure your Windows 2000 Professional portable computer to redirect your My Documents folder to your home folder. You want to ensure that you can access all of your files in you’re my Documents folder when you are not connected to the network. What should you do？（）A、Use Windows Explorer to enable offline files.B、Use Windows Explorer to create shortcut to access offline files folder as desktop.C、Use Windows Explorer to configure the properties of your home folder to be available offline.D、Use synchronization manager to configure your home folder to be available offline.E、Create a shortcut in my network places to access your home folder.
单选题You have a read-only tablespace on read-only media. You want to perform a media recovery on the existing data files， but using a backup control file. The backup control file indicates that the status of the read-only tablespace was read/write when the control file was backed up. What should you consider？（）A take data files from the read-only tablespace offline before performing a recoveryB recovery using backup control file is not possible， so restore all the files from the last full database backup， and then open the databaseC drop the read-only tablespace and re-create the tablespace after recoveryD perform a recovery； status of the tablespace in control file will be changed automatically
单选题One of the tablespaces is read-only in your database. The loss of all control files forced you to re-create the control file. Which operation do you need to perform after re-creating the control file and opening the database？（）A drop and re-create the read-only tablespacesB rename the read-only data files to their correct file namesC change the tablespace status from read/write to read-onlyD re-create the read-only tablespace because it is automatically removed
单选题You have 100 segments in the USERS tablespace. You realize that the USERS tablespace is running low on space. You can use Segment Advisor to（）.Aadd data files to the tablespace Bidentify the segments that you should shrink Cmodify the storage parameters for the tablespace Dautomatically shrink the segments with unused space Echeck the alerts generated for the tablespace that is running low on space
单选题You want to drop the TBS1 tablespace from your database. You also want to delete the corresponding data files automatically， and not have to do it manually. What should you do？（）AUse the DROP DATAFILE command.BUse the DROP TABLESPACE command.CEnsure that all database files are Oracle Managed Files before using the DROP TABLESPACE command.DEnsure that the DB_FILE_CREATE_DEST initialization parameter is set before using the DROP TABLESPACE command.
单选题Your database runs in NOARCHIVELOG mode， and is backed up every night using RMAN scripts. However， last night your assistant DBA performed a manual operating system backup， instead of running the scripts. Today your database crashed and you now want to use the backups from last night. What do you need todo？（）AYou need to perform the restore and recover operations manually, because the backup was made manually. BFirst you need to resynchronize the catalog with the control file, and then you can use RMAN to recover the database. CFirst you need to add the backup to the catalog using the CATALOG command, and then you can use RMAN to recover the database. DYou can just use RMAN and recover the database, because RMAN automatically updates the catalog with the backup information.
单选题Your database contains two temporary tablespaces named TEMP and TEMP1. The TEMP tablespace is the default temporary tablespace for the database， and the TEMP1 tablespace was created at database creation. You want to increase the size of the tempfile for the TEMP tablespace and drop the TEMP1 tablespace from the database. The database is not using Oracle-Managed Files （OMF）. Which statement must you use to ensure that when you drop the TEMP1 tablespace from the database， its corresponding operating system file is also deleted？（）A DROP TABLESPACE temp1；B DROP TABLESPACE temp1 INCLUDING CONTENTS；C DROP TABLESPACE temp1 INCLUDING CONTENTS AND DATAFILES；D DROP TABLESPACE temp1 INCLUDING CONTENTS CASCADE CONSTRAINTS；