单选题You install Windows 2000 Professional onto an NTFS partition on your computer. During theinstallation, you manually specify the OEM driver for the tape device SCSI controller. After theinstallation, you run the Winnt32 /cmdcons command. Then you successfully install the latest Windows2000 service pack.Next, you install an updated driver for the tape device SCSI controller. When you restart the system andlog on to the computer, you receive a stop error.You need to restore the functionality of the SCSI controller with the least amount of administrative effort. What should you do? （）ARestart the computer in Safe Mode. Reinstall the functional SCSI controller driver. BRestart the computer into Recovery Console. Replace the faulty SCSI controller driver with the functional one. CStart the computer by using a Windows 2000 Professional disk. Replace the faulty SCSI controller driver with the functional one. DInstall a parallel copy of Windows 2000 Professional in a separate folder. Copy the functional SCSI controller driver into the original system folder, and restart the computer to the previous installation.
单选题
You install Windows 2000 Professional onto an NTFS partition on your computer. During theinstallation, you manually specify the OEM driver for the tape device SCSI controller. After theinstallation, you run the Winnt32 /cmdcons command. Then you successfully install the latest Windows2000 service pack.Next, you install an updated driver for the tape device SCSI controller. When you restart the system andlog on to the computer, you receive a stop error.You need to restore the functionality of the SCSI controller with the least amount of administrative effort. What should you do? （）
A
Restart the computer in Safe Mode. Reinstall the functional SCSI controller driver.
B
Restart the computer into Recovery Console. Replace the faulty SCSI controller driver with the functional one.
C
Start the computer by using a Windows 2000 Professional disk. Replace the faulty SCSI controller driver with the functional one.
D
Install a parallel copy of Windows 2000 Professional in a separate folder. Copy the functional SCSI controller driver into the original system folder, and restart the computer to the previous installation.
参考解析
解析：
The SCSI controller controls the tape device not any hard drives. This makes it possible to boot to Safe Mode and reinstall the functional driver. The SCSI driver could also be disabled in Safe Mode.
相关考题：
You want to configure a multiboot system with Windows NT Workstation and Windows 2000 Professional.What should you do?A．When installing Windows 2000 Professional run chkdisk in Windows NT Workstation.B．Disable the disk compression in Windows NT Workstation.C．Install service pack four or later in Windows NT Workstation.D．Install the distributed file system client on the Windows NT Workstation.
your company has servers that run windows server 2008. All client computers run windows XP service pack 2 (SP2.). windows 2000 professional, or windows vista. You need to ensure all computers can use the IPv6 protocol. What should you do?（）A.Install service pack 4 on all windows 2000 professional computers.B.Upgrade the windows 2000 professional computers to windows XP SP2.C.Run the IPv6.exe tool on the windows 2000 professional and windows XP computers.D.Install active directory client extenticon. (DSClient.exe) on the windows 2000 professional and windows XP computers.
You are the administrator of a Windows NT 4.0 Terminal Server Edition computer. The server has one hard disk, which is divided into two partitions The first partition contains the Windows NT 4.0 system files and is formatted as FAT. The second partition contains application data and user data. This second partition is formatted as NTFS. The server currently has Service Pack 3 installed.You need to upgrade the server to Windows 2000 Server. You want to ensure that no application data or user data is lost during the upgrade. You also want to perform. the minimum number of steps necessary to complete the upgrade.What should you do? (Choose all that apply)A．Convert the system partition to NTFS.B．Install service pack4 or later on the server.C．Use a Windows 2000 Server CD to start the server. In setup, select the option to upgrade.D．Replace the Terminal Server installation with a standard Windows NT server 4.0 installation.
You are the administrator of Ezonexam.com's Windows 2000 network.Your computer is configured to use both Windows 2000 Professional and Windows NT Workstation 4.0 Service Pack 3. Your computer has three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You want to store your project files on Disk2. You configure Disk2 as a basic volume and format the volume as NTFS in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files.You want to be able to access your project files when using either of the operating systems.What should you do?A．Upgrade Windows NT Workstation 4.0 to Service Pack 4 or later.B．Configure Disk 2 as a dynamic volume then format as an NTFS partition.C．Configure Disk 2 to use Encrypting File System (EFS).D．Configure Disk 2 as a basic volume and format the volume as FAT32.
You are configuring five computers for Windows NT Workstation 4.0 and Windows 2000 Professional.Each computer has an 8 GB hard disk.You configure the hard disk on each computer to have two 4 GB partitions. Windows NT Workstation is installed on drive C and Windows 2000 Professional on drive D.In Windows 2000 Professional, you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart your computer and load Windows NT Workstation. You notice that users can save files to drive D.You want to prevent users from saving the files to drive D in either operating system. You also want to ensure that users can access both drives while using either operating system.What should you do?A．Use Windows 2000 Professional to configure drive D as a dynamic partition.B．Use Windows 2000 Professional to enable encrypting file system on drive D.C．Use Windows NT workstation to configure NTFS permissions on drive D to deny the users write permission.D．Reinstall Windows NT Workstation after configuring disk quotas.
You want to upgrade a Windows NT Server 4.0 computer to Windows 2000 Server. The system partition uses the FAT file system.You start the Setup program by starting the computer from the Windows 2000 Server CD-ROM.However, you receive the following error message, "You chose to install Windows 2000 on a partition that contains another operating system. Installing Windows 2000 on this partition might cause the operating system to function improperly".You are unable to perform. the upgrade. What should you do to resolve the problem?A．Convert the system partition to NTFS.B．Disable Advanced Configuration and Power Interface (ACPI) support for the computer.C．Restart the computer, and then run Winnt32.exe from the Windows NT Server 4.0 environment.D．Remove the Windows 2000 Server CD-ROM and restart the computer by using the setup floppy disks.
You perform a clean installation of Microsoft Windows Vista on the first partition. Then, you install Microsoft Windows XP Professional on the second partition of the same machine.You are able to log on to Windows XP Professional but do not have the option to boot to Windows Vista.You need to be able to dual boot the computer.What should you do?（）A.AB.BC.CD.D
Your company has servers that run Windows Server 2008. All client computers run Windows XP Service Pack 2 （SP2）. Windows 2003 Professional， or Windows Vista. You need to ensure all computers can use the IPv6 protocol. What should you do（）A、Install Serivce Pack 4 on all Windows 2000 Professional computersB、Upgrade the Windows 2000 professional computers to Windows XP SP2C、Run the IPv6.exe tool on the Windows 200 Professional and Windows XP computersD、Install Active Directory Client extention （DSClient.exe） on the Windows 2000 Professional and Windows XP computers.
You install Windows 2000 Professional onto an NTFS partition on your computer. During theinstallation, you manually specify the OEM driver for the tape device SCSI controller. After theinstallation, you run the Winnt32 /cmdcons command. Then you successfully install the latest Windows2000 service pack.Next, you install an updated driver for the tape device SCSI controller. When you restart the system andlog on to the computer, you receive a stop error.You need to restore the functionality of the SCSI controller with the least amount of administrative effort. What should you do? （）A、Restart the computer in Safe Mode. Reinstall the functional SCSI controller driver. B、Restart the computer into Recovery Console. Replace the faulty SCSI controller driver with the functional one. C、Start the computer by using a Windows 2000 Professional disk. Replace the faulty SCSI controller driver with the functional one. D、Install a parallel copy of Windows 2000 Professional in a separate folder. Copy the functional SCSI controller driver into the original system folder, and restart the computer to the previous installation.
You want to configure a multiboot system with Windows NT Workstation and Windows 2000 Professional. What should you do？（）A、 When installing Windows 2000 Professional run chkdisk in Windows NT Workstation.B、 Disable the disk compression in Windows NT Workstation.C、 Install service pack four or later in Windows NT Workstation.D、 Install the distributed file system client on the Windows NT Workstation.
As the administrator of your Windows 2000 corporate network you need to install Windows 2000 Professional on 88 computers, and you would like to do it with the least amount of administrative effort. You have 38 PXE-Compliant computers and 50 NON PXE-Compliant computers ready to go. You confirm that all 88 computers and their hardware are included on the current Windows 2000 hardware compatibility list (HCL).You create an RIS image and load it onto a Windows 2000 RIS Server. You then start the 88 computers. You find that the 38 PXE-Compliant computers connect fine to the RIS server, however the 50 NON PXE-Compliant computers cannot connect to the RIS server. What should you do to resolve this problem?（）A、Run RBFG*EXE to create a Non-PXE-compliant startup disk.B、Run RIPREP.*XE to create a non - PXE complaint startup disk.C、Grant the ‘Everyone’ group NTFS Read permission for the RIS image.D、Grant the Administrators group NTFS Read permission for the RIS image.
your company has servers that run windows server 2008. All client computers run windows XP service pack 2 (SP2.). windows 2000 professional, or windows vista. You need to ensure all computers can use the IPv6 protocol. What should you do?（）A、Install service pack 4 on all windows 2000 professional computers.B、Upgrade the windows 2000 professional computers to windows XP SP2.C、Run the IPv6.exe tool on the windows 2000 professional and windows XP computers.D、Install active directory client extenticon. (DSClient.exe) on the windows 2000 professional and windows XP computers.
Windows NT 4.0 is currently on the system you are using, and you want to install Windows 2000 Professional. Windows NT 4.0 is currently on an NFTS partition. For some reason you have decided that you are not going to upgrade, but rather, you are going to run this in a dual boot fashion. What do you need to do? （）A、Can’t be done.B、You need to put Windows 2000 on a separate partition from Windows NT 4.0C、You need to put Windows 2000 on the same partition as Windows NT 4.0.D、You need to upgrade Windows NT 4.0 to SP4.
You are the administrator of Company's network. You have configured your computer with a dual-boot configuration. The computer uses both Windows 2000 Professional and Windows NT Workstation 4.0 with the latest service pack. Your computer is equipped with three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You wish to use Disk 2 to store your project files on. You partition Disk 2 and configure it as a dynamic volume in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files. You want to be able to access your project files when using either of the operating systems. What should you do?（）A、Format the dynamic volume as a FAT32 partition.B、Format the dynamic volume as a FAT16 partition.C、Configure Disk 2 to use Encrypting File System （EFS）.D、Configure Disk 2 as a basic volume and format the volume as NTFS.E、Configure Disk 2 as a basic volume and format the volume as FAT32.
You need to configure a new computer to dual-boot to the following operating systems： Microsoft Windows XP Professional Microsoft Windows Vista Which two procedures should you perform？ （）A、Create two partitions. Install Windows XP Professional on the first partition. Boot the computer from the Windows Vista DVD-ROM. Install Windows Vista on the second partition.B、Create two partitions. Install Windows Vista on the first partition. Boot from the Windows XP Professional installation CD-ROM. Install Windows XP Professional on the second partition. C、Create one partition. Install Windows XP Professional on the partition. From Windows XP Professional launch the Windows Vista setup utility. Install Windows Vista in the same partition. D、Create two partitions. Install Windows XP Professional on the first partition. From Windows XP Professional launch the Windows Vista setup utility. Install Windows Vista on the second partition.
You perform a clean installation of Microsoft Windows Vista on the first partition. Then， you install Microsoft Windows XP Professional on the second partition of the same machine. You are able to log on to Windows XP Professional but do not have the option to boot to Windows Vista. You need to be able to dual boot the computer. What should you do？（）A、Run the bootcfg.exe application with the /fastdetect option.B、Perform a clean installation of Windows Vista on the first partition.C、Run the msconfig.exe application and change the order of the operating systems in the boot.ini file.D、Edit the boot.ini file. Add the following line： Multi（0）Disk（0）Rdisk（0）Partition（1）/Microsoft Windows
You are the administrator of your company's network. You install 220 new Windows 2000 Professional computers in the Sales department. Two weeks later users report that five of the computers have stopped responding. You troubleshoot the five computers and find that the users have attached USB devices and have installed device drivers that are not supported by Windows 2000 Professional. You want to ensure that it does not happen again. You decide to configure the computer to install device drivers only for the devices that are included on the current hardware compatibility list (HCL). What should you do?（）A、Use NTFS permission to restrict users access to the C:///WinNT/driver cache folder.B、Use NTFS permission to restrict users access to the C:///WinNT/system32/drivers folder.C、Configure Windows 2000 Professional to enable driver signing verification.D、Configure Windows 2000 Professional to trust the Microsoft certificate authority （CA）.
You are the administrator of Company's network.You install 50 new Windows 2000 Professional computers in the Web Development department. Twoweeks later, users report that five of the computers have stopped responding. You troubleshoot the fivecomputers. You find that users have attached devices and have installed device drivers that are notsupported by Windows 2000 Professional.You want to ensure that this does not happen again. You device to configure the computers to installdevice drivers only for devices that are included on the current Hardware Compatibility List (HCL).What should you do?（）A、Configure the Administrator option to enable the Apply setting as system default option. B、Configure Windows 2000 Professional to enable driver signing verification. C、Use NTFS permissions to restrict user access to the /Winnt/Driver Cache folder. D、Use NTFS permissions to restrict user access to the /Winnt/System32/Drivers folder. E、Configure Windows 2000 Professional to trust the Microsoft Certificate Authority (CA).
You are the administrator of your company’s network. The software department is preparing to rewrite an accounting application so that it will run on Windows 2000 Professional computers. All of the computers in the software department currently use Windows 98. You want to configure the computers in the software department so that the users can use both Windows 98 and Windows 2000 Professional during the project. You also want to ensure that the computers are configured for optimal disk performance. In addition you want to ensure that users in the software department can access all of the files on their computers by using either operating system. What should you do? （）A、 Create and format a FAT 32 partition.B、 Create and format an NTFS volume.C、 Configure Windows 2000 Professional to enable disk compression.D、 Configure Windows 2000 Professional to enable dynamic volume
You have implemented folder compression on the Windows 2000 Server and Windows 2000 Professional computers on your network. A user named Julia copies a compressed folder from an NTFS partition on her Windows 2000 Workstation to a shared NTFS folder on a remote Windows 2000 Server. What effect will this have on the newly created folder?（）A、The newly created folder will retain its original compression state.B、The newly created folder will inherit the compression state of the target folder.C、The newly created folder will be automatically uncompressed.D、Folder compression depends on the users access permissions.
You are preparing for an upgrade of Windows 2000 Professional using Remote Installation Services （RIS） on a member server， which is in the Installation organizational unit （OU）. You loaded the RIS software and all images for the Windows 2000 Professional computer types into a shared NTFS version 5 volume. You distributed a remote installation boot disk to all users in case their adapter doesn’t support PXE boot ROM and doesn’t have BIOS support for using the PXE boot ROM as the primary boot device. The users report that they are unable to install Windows 2000 Professional. What do you need to do in order to resolve the problem？（）A、 Include the users who will do the install in the Installation OU where the RIS server object is located. Assign them rights to "Bypass traverse checking." B、Load the Windows 2000 Professional images onto the server's boot drive, which is a separate hard disk from the RIS software. C、Create a security group for the users who will do the installation and assign the group "Log on as a batch job" rights. Assign the group permission to create computer accounts. D、Reinstall the RIS software on a domain controller in a shared volume and modify the boot disks to map to the shared volume.
单选题The /Reports folder is a compressed folder on an NTFS partition on your Windows 2000 Professional computer. You want to copy the /Reports folder to an uncompressed folder in the same NTFS volume. You want the /Reports folder to remain compressed after it is copied. What should you do?（）ACopy the folder.BCompress the target folder， and copy the folder.CApply compression to each file in the /Reports folder， and copy the folderDUncompress the /Reports folder， compress the target folder， and copy the folder
多选题You want to install windows 2000 professional on a system. which two commands can be used to run the setup of Windows 2000 professional. （）AWINNT*EXEBSETUP*EXECWINNT32*EXEDINSTALLER*EXE
多选题You are the administrator of Company's network.You install 50 new Windows 2000 Professional computers in the Web Development department. Twoweeks later, users report that five of the computers have stopped responding. You troubleshoot the fivecomputers. You find that users have attached devices and have installed device drivers that are notsupported by Windows 2000 Professional.You want to ensure that this does not happen again. You device to configure the computers to installdevice drivers only for devices that are included on the current Hardware Compatibility List (HCL).What should you do?（）AConfigure the Administrator option to enable the Apply setting as system default option.BConfigure Windows 2000 Professional to enable driver signing verification.CUse NTFS permissions to restrict user access to the /Winnt/Driver Cache folder.DUse NTFS permissions to restrict user access to the /Winnt/System32/Drivers folder.EConfigure Windows 2000 Professional to trust the Microsoft Certificate Authority (CA).
单选题You are the administrator of ExamSheet's network. The software department is preparing to rewrite an accounting application so that it will run on Windows 2000 Professional computers. All of the computers in the software department currently use Windows 98. You plan to configure the computers in the software department so that users can use both Windows 98 and Windows 2000 Professional during the project. You want to ensure that users in the software department can access all of the files on their computers while using operating system. What should you do?（）ACreate and format an NTFS volume. Install Windows 2000 Professional on the volume. Create a primary partition in the remaining disk space and format the volume using the FAT32 file system.Reinstall Windows 98 on the new primary partition. BCreate and format an NTFS volume. Install Windows 2000 Professional on the volume. Create an extended partition in the remaining disk space and format the volume using the FAT32 file system. Reinstall Windows 98 on the new extended partition. CCreate and format and extended partition. Create a logical drive within the extended partition and format the drive with the FAT32 file system. Install Windows 2000 Professional on the new partition. DCreate and format an extended partition. Create a logical drive within the extended partition and format the drive with the NTFS file system. Install Windows 2000 Professional on the new partition.
单选题Windows NT 4.0 is currently on the system you are using, and you want to install Windows 2000 Professional. Windows NT 4.0 is currently on an NFTS partition. For some reason you have decided that you are not going to upgrade, but rather, you are going to run this in a dual boot fashion. What do you need to do? （）ACan’t be done.BYou need to put Windows 2000 on a separate partition from Windows NT 4.0CYou need to put Windows 2000 on the same partition as Windows NT 4.0.DYou need to upgrade Windows NT 4.0 to SP4.
单选题You are the administrator of Company.com’s Windows 2000 network. Your computer is configured to use both Windows 2000 Professional and Windows NT Workstation 4.0 Service Pack 3. Your computer has three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You want to store your project files on Disk2. You configure Disk2 as a basic volume and format the volume as NTFS in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files. You want to be able to access your project files when using either operating systems. What should you do?（）AUpgrade Windows NT Workstation 4.0 to Service Pack 4 or later.BConfigure Disk 2 as a dynamic volume then format as an NTFS partition.CConfigure Disk 2 to use Encrypting File System （EFS）.DConfigure Disk 2 as a basic volume and forma the volume as FAT32.