You are the administrator of Ezonexam.com's Windows 2000 network.Your computer is configured to use both Windows 2000 Professional and Windows NT Workstation 4.0 Service Pack 3. Your computer has three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You want to store your project files on Disk2. You configure Disk2 as a basic volume and format the volume as NTFS in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files.You want to be able to access your project files when using either of the operating systems.What should you do?A.Upgrade Windows NT Workstation 4.0 to Service Pack 4 or later.B.Configure Disk 2 as a dynamic volume then format as an NTFS partition.C.Configure Disk 2 to use Encrypting File System (EFS).D.Configure Disk 2 as a basic volume and format the volume as FAT32.

You are the administrator of Ezonexam.com's Windows 2000 network.

Your computer is configured to use both Windows 2000 Professional and Windows NT Workstation 4.0 Service Pack 3. Your computer has three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You want to store your project files on Disk2. You configure Disk2 as a basic volume and format the volume as NTFS in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files.

You want to be able to access your project files when using either of the operating systems.

What should you do?

A.Upgrade Windows NT Workstation 4.0 to Service Pack 4 or later.

B.Configure Disk 2 as a dynamic volume then format as an NTFS partition.

C.Configure Disk 2 to use Encrypting File System (EFS).

D.Configure Disk 2 as a basic volume and format the volume as FAT32.


相关考题:

You want to configure a multiboot system with Windows NT Workstation and Windows 2000 Professional.What should you do?A.When installing Windows 2000 Professional run chkdisk in Windows NT Workstation.B.Disable the disk compression in Windows NT Workstation.C.Install service pack four or later in Windows NT Workstation.D.Install the distributed file system client on the Windows NT Workstation.

The network consists of a single domain named Ezonexam.com that includes 20 Windows NT workstation 4.0 client computers. All other client computers are Windows 2000 Professional computers. You install Terminal Services on one of the Windows Server computers and Terminal Services Client on the 20 Windows NT Workstation 4.0 client computers. You create a system policy on the server that is configured as the terminal server. This system policy denies access to Network Neighborhood. You find that the users of the terminal server can still browse the network when they open My Network Places from Windows 2000 Professional computer or when they open Network Neighborhood from Windows NT Workstation 4.0 computers.You want to prevent all users from browsing the network.What should you do? (Each correct answer presents a complete solution. Choose two.)A.Create a Windows Group Policy that denies user access to My Network Places.B.Copy the Windows NT policy file to the 20 Windows NT Workstation 4.0 computers.C.Create a Windows NT 4.0 default user policy on the Windows 2000 Server computer that is configured as the PDC emulator.D.Modify the Windows NT policy template file so that you can restrict access to both My Network Places and Network Neighborhood. Save the policy file on the terminal server.E.Configure the terminal server to use Application server mode. Select the Permissions compatible with Terminal Server 4.0 Users option.

You are the administrator of a Windows NT Server 4.0 computer names Ezonexam1.Ezonexam1 is a backup domain controller in Ezonexam.com's Windows 2000 Active Directory domain. Ezonexam1 contains five hard disks. Disks 0 and 1 are configured as a Windows NT 4.0 mirror set and contain the operating system files. There are 300 MB of disk space remaining on the Windows NT 4.0 mirror set. Disk 2, 3, and 4 are configured as a Windows NT 4.0 stripe set with parity and contain employee data files. The Windows NT 4.0 stripe set with parity has a maximum capacity of 140 GB and currently has 15 GB free. Ezonexam1 runs an application that is used by all of Ezonexam.com's employees.A new version of the application is available. The new version requires Windows 2000 Server. The application will not run on a domain controller.You need to install the new application on Ezonexam1 as quickly as possible.What should you do first?A.Install Windows 2000 Server on Ezonexam1. Configure Ezonexam1 to use a dual boot configuration that includes Windows NT Server 4.0 and Windows 2000 Server.B.On a second Windows 2000 Server computer, run the sysprep utility to create a cloned server image. Use this image to upgrade Ezonexam1.C.Upgrade Ezonexam1 to be a Windows 2000 member server. After the upgrade, run the dcpromo utility on Ezonexam1.D.Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade, select the option to make Ezonexam1 a member server.

You are the administrator of a Windows 2000 Server network that runs in mixed mode. You install a new Windows 2000 Server computer. You create and share a new HP LaserJet 4L printer.Your Windows 2000 Professional client computer can print to the new printer successfully. However, when users try to connect to the printer from Windows NT Workstation 4.0 client computers, they receive the dialog box shown in the exhibit.You want the printer driver to install automatically on the Windows NT Workstation computers. What should you do?A.Copy the Windows NT 4.0 printer drivers to the Netlogon shared folders on all Windows NT Server 4.0 computers still configured as BDCs.B.Copy the Windows NT 4.0 printer drivers to the Netlogon shared folders on the PDC emulator.C.Change the sharing options on the printer to install additional drivers for Windows NT 4.0 or Windows 2000.D.Copy the Windows NT 4.0 printer drivers to the Winnt\System32\printers\drivers folder on the Windows 2000 print Server.

You are configuring 5 computers to use both Windows NT workstation 4.0 and Windows 2000 Professional. Each computer has an 8GB hard disk. You configure that hard disk on each computer to have two 4GB partitions. Windows NT workstation is installed on drive C. Windows 2000 Professional is installed on drive D. In Windows 2000 Professional you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart the computer and load Windows NT workstation.You notice that users can still save files to drive D.You want to prevent users from saving files to drive D in either operating system. You also want to ensure that users can access both drives using either operating system. What should you do on each computer?A.Use Windows 2000 Professional to configure drive D as a dynamic volume.B.Use Windows 2000 Professional to enable Encrypting File System (EFS) on drive D.C.Use Windows NT workstation to configure NTFS permission on drive D to deny the users write permission.D.Reinstall Windows NT workstation after configuring the disk code task.

You are the administrator of a network that consists of a single Windows NT 4.0 domain. The network contains five Windows NT Server domain controllers and 1,000 Windows NT Workstation client computers.You want to install Windows 2000 Server on a new computer. You want the new computer to act as domain controller in the existing domain.What should you do?A.On the new computer, install Windows NT Server 4.0 and designate the computer as a BDC in the existing domain. Promote the computer to the PDC of the domain. Upgrade the computer to Windows 2000 Server.B.On the new computer, install Windows NT Server 4.0 and designate the computer as a PDC in a new domain that has the same NetBIOS name as the existing Windows NT domain. Upgrade the computer to Windows 2000 Server. Use the Active Directory sites and services to force synchronization of the domain controllers.C.Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory, specifying the same NetBIOS name for the Windows 2000 domain as the existing Windows NT domain. Restart the Windows NT PDC on the network and demote it to a BDC.D.Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory as a replica in the existing Windows NT domain. Promote the new computer to the PDC of the domain. Restart Windows NT PDC on the network and demote it to a BDC.

You are the administrator for Ezonexam's network.Your network includes Windows 2000 Professional client computers, Windows 2000 Server computers, Windows XP Professional computers, and UNIX client computers. Users of the UNIX operating system send print jobs to shared printers on a UNIX computer named PrintServ.You want to make the shared printers on PrintServ available to the Windows 2000 Professional computers, the Windows 2000 Server computers and the Windows XP Professional computers.What should you do?A.Use the SRVANY utility from the Windows NT Resource Kit to run the LPR program as a service.B.Configure each of the printers to support TCP/IP printing.C.Create an LPR port on each client that is configured to use PrintServ.D.Configure each of the printers to use LPR port

You are configuring five computers for Windows NT Workstation 4.0 and Windows 2000 Professional.Each computer has an 8 GB hard disk.You configure the hard disk on each computer to have two 4 GB partitions. Windows NT Workstation is installed on drive C and Windows 2000 Professional on drive D.In Windows 2000 Professional, you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart your computer and load Windows NT Workstation. You notice that users can save files to drive D.You want to prevent users from saving the files to drive D in either operating system. You also want to ensure that users can access both drives while using either operating system.What should you do?A.Use Windows 2000 Professional to configure drive D as a dynamic partition.B.Use Windows 2000 Professional to enable encrypting file system on drive D.C.Use Windows NT workstation to configure NTFS permissions on drive D to deny the users write permission.D.Reinstall Windows NT Workstation after configuring disk quotas.

You are the administrator for Ezonexam.com's network.Your network includes Windows 2000 Professional client computers, Windows NT Workstation 4.0 client computers, Windows 98 client computers, and UNIX client computers. Users of the Windows operating systems store files on shared folders on a Windows 2000 Server computer named FileServ.You want to make the shared folders on FileServ available to the UNIX computers.What should you do?A.Install and configure Network File System (NFS) on FileServ.B.Configure data volumes on FileServ to be FAT volumes.C.Disable Server Message Block (SMB) signing on FileServ.D.Install Simple TCP/IP Services on FileServ.

You want to configure a multiboot system with Windows NT Workstation and Windows 2000 Professional. What should you do?()A、 When installing Windows 2000 Professional run chkdisk in Windows NT Workstation.B、 Disable the disk compression in Windows NT Workstation.C、 Install service pack four or later in Windows NT Workstation.D、 Install the distributed file system client on the Windows NT Workstation.

You configure the hard disk on each computer to have two 4-GB partitions. Windows NT  Workstation is installed on driver C.  Windows 2000 Professional is installed on drive D.   In Windows 2000 Professional, you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart the computers and load Windows NT Workstation. You notice that users can still save files to drive D.   You want t prevent users from saving files to drive D in either operating system. You also want to ensure that users can access both drives while using either operating system.   What should you do on each computer?()A、Use Windows 2000 Professional to configure drive D as a dynamic partitionB、Use Windows 2000 Professional to enable Encrypting File System (EFS) on drive DC、Use Windows NT Workstation to configure NTFS permissions on drive D to deny the users write permissionD、Reinstall Windows NT Workstation after configuring the disk quotas

You are the network administrator for Company.com.  Your computer has a CD-ROM drive attached to a SCSI adapter. You plan to upgrade your computer from Windows NT Workstation 4.0 to Windows 2000 Professional. You determine that the SCSI adapter is not included on the current Hardware Compatibility List (HCL) and that the original SCSI drivers that you used for Windows NT are not compatible with Windows 2000 Professional.   You want to upgrade your computer to Windows 2000 Professional. What should you do?()A、 Replace the SCSI adapter card with a Windows 2000 Professional compatible SCSI adapter.     Start the installation from the Windows 2000 Professional CD-ROM.     Add the new adapter card drivers when you are prompted. B、 Obtain Windows 2000 drivers from the SCSI adapter manufacturer.     Copy the drivers to C:/Winnt folder.      Start the installation from the Windows 2000 Professional CD-ROM. C、 Obtain Windows 2000 drivers from the SCSI adapter manufacturer.     Start the installation by using the Windows 2000 Professional CD-ROM-     Add the new adapter card drivers when you are prompted. D、 Modify Config.sys to use your existing SCSI adapter and existing CD-ROM drive.      Using Windows NT 4.0, start the installation by running Winnt32.exe from the I386 folder on      the Windows 2000 Professional CD-ROM.

You are the desktop administrator for your company's sales department. Susan is a user in the sales department. Susan's computer currently runs Microsoft Windows NT Workstation 4. 0.  Susan uses a legacy application that is compatible with only Windows NT Workstation. You want to install Windows XP Professional on Susan's computer. You plan to set up a dual-boot configuration so that Susan can run either Windows XP Professional or Windows NT Workstation. Susan's computer has two hard disks, named drive C and drive G. You install Windows XP Professional on drive G. After Windows XP Professional is installed, Susan reports that Windows NT Workstation is no longer available. You need to ensure that both operating systems are available on Susan's computer. What should you do?() A、Insert the Windows XP Professional CD-ROM into the computer. Run the Sfc.exe /scannow command.B、Insert the Windows XP Professional CD-ROM into the computer. Run the Winnt32. exe /cmdcons command.C、Start the computer by using an MS-DOS bootable floppy disk. Run the Attrib.exe -r -h -s c:/bootsect.dos command.D、Start the computer by using the Windows XP Professional CD-ROM. From the Recovery console, run the Bootcfg /rebuild command.

You are the administrator of Company's network. You have configured your computer with a dual-boot configuration. The computer uses both Windows 2000 Professional and Windows NT Workstation 4.0 with the latest service pack. Your computer is equipped with three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You wish to use Disk 2 to store your project files on. You partition Disk 2 and configure it as a dynamic volume in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files. You want to be able to access your project files when using either of the operating systems.  What should you do?()A、Format the dynamic volume as a FAT32 partition.B、Format the dynamic volume as a FAT16 partition.C、Configure Disk 2 to use Encrypting File System (EFS).D、Configure Disk 2 as a basic volume and format the volume as NTFS.E、Configure Disk 2 as a basic volume and format the volume as FAT32.

You are configuring 5 computers to use both Windows NT workstation 4.0 and Windows 2000 Professional. Each computer has an 8GB hard disk. You configure that hard disk on each computer to have two 4GB partitions. Windows NT workstation is installed on drive C. Windows 2000 Professional is installed on drive D.  In Windows 2000 Professional you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart the computer and load Windows NT workstation. You notice that users can still save files to drive D. You want to prevent users from saving files to drive D in either operating system. You also want to ensure that users can access both drives using either operating system.  What should you do on each computer? ()A、Use Windows 2000 Professional to configure drive D as a dynamic volumeB、Use Windows 2000 Professional to enable Encrypting File System (EFS) on drive DC、Use Windows NT workstation to configure NTFS permission on drive D to deny the users write  permissionD、Reinstall Windows NT workstation after configuring the disk code task

You are configuring five computers for Windows NT Workstation 4.0 and Windows 2000 Professional. Each computer has an 8 GB hard disk. You configure the hard disk on each computer to have two 4 GB partitions.  Windows NT Workstation is installed on drive C and Windows 2000 Professional on drive D. In Windows 2000 Professional, you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart your computer and load Windows NT Workstation. You notice that users can save files to drive D.  You want to prevent users from saving the files to drive D in either operating system. You also want to ensure that users can access both drives while using either operating system.  What should you do?()A、Use Windows 2000 Professional to configure drive D as a dynamic partitionB、Use Windows 2000 Professional to enable encrypting file system on drive DC、Use Windows NT workstation to configure NTFS permissions on drive D to deny the users  write permissionD、Reinstall Windows NT Workstation after configuring disk quotas

Sandy works in Tron Electronics and uses a Windows 2000 Professional system to work on. Today she is visiting another department, and is using a Windows NT 4.0 system. She wants to print a document but is missing her printer. You want her to be able to print from any computer she logs in at. What can you do to insure that she has this ability?()A、 Configure the server properties of printer system folder to connect to the shared printer. B、Install a print driver for the print device on the Windows NT workstation computer. C、Create a roaming user profile for Sandy D、Upgrade the Windows NT 4 computer to a Windows 2000 Professional computer and then  import the file settings for Sandy's user account.

You are the administrator of a Windows 2000 network. You are configuring eight computers to use both Windows NT Workstation 4.0 and Windows 2000 Professional. Each computer has a 10 GB hard disk. You configure the hard disk on each computer to have two 5 GB partitions. Windows NT Workstation is installed on drive D. Windows 2000 Professional is installed on drive C. In Windows 2000 Professional, you configure a disk quota on drive C to prevent users from saving work files on the disk. You restart the computers and load Windows NT Workstation 4.0. You notice that users can still save files to drive C. You want to prevent users from saving files to drive C in either operating system. You also want to ensure that users can access both drives while using either operating system. What should you do on each computer? ()A、Reinstall Windows NT Workstation 4.0 after configuring the disk quotasB、Use Windows 2000 Professional to configure drive C as a dynamic partitionC、Use Windows 2000 Professional to enable Encrypting File System (EFS) on drive CD、Use Windows NT Workstation 4.0 to configure NTFS permissions on drive C to deny the usersWrite permission

Your computers have both Windows NT Workstation 4.0, and Windows 2000 Professional operating systems. You configure the hard disk on each computer to have two 4-GB partitions. Windows NT Workstation is installed on drive C, and Windows 2000 Professional is installed on drive D. You configure a disk quota on drive D to prevent users from saving data on the disk.  How can you prevent users from saving files to drive D in either operating system?()A、The required result cannot be obtained with the above given solutionsB、Enable EFS on DC、Format the NT 4 partition and reload NT 4D、Use NT 4.0 NTFS permissions to deny users write access to D

You are the administrator of Company.com’s Windows 2000 network.   Your computer is configured to use both Windows 2000 Professional and Windows NT Workstation 4.0 Service Pack 3. Your computer has three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You want to store your project files on Disk2. You configure Disk2 as a basic volume and format the volume as NTFS in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files.  You want to be able to access your project files when using either operating systems.   What should you do?()A、Upgrade Windows NT Workstation 4.0 to Service Pack 4 or later.B、Configure Disk 2 as a dynamic volume then format as an NTFS partition.C、Configure Disk 2 to use Encrypting File System (EFS).D、Configure Disk 2 as a basic volume and forma the volume as FAT32.

You want to configure your Windows NT Workstation 4.0 computer Company1 to run both Windows NT Workstation and Windows 2000 Professional.  What should you do before installing Windows 2000 Professional on Company1? ()A、 Run Check Disk in Windows NT Workstation 4.0.B、 Disable disk compression in Windows NT Workstation 4.0.C、 Install Service Pack 4 or later for Windows NT Workstation 4.0.D、 Install the Distributed file system (Dfs) client in Windows NT Workstation 4.0.

单选题You are configuring 5 computers to use both Windows NT workstation 4.0 and Windows 2000 Professional. Each computer has an 8GB hard disk. You configure that hard disk on each computer to have two 4GB partitions. Windows NT workstation is installed on drive C. Windows 2000 Professional is installed on drive D.  In Windows 2000 Professional you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart the computer and load Windows NT workstation. You notice that users can still save files to drive D. You want to prevent users from saving files to drive D in either operating system. You also want to ensure that users can access both drives using either operating system.  What should you do on each computer? ()AUse Windows 2000 Professional to configure drive D as a dynamic volumeBUse Windows 2000 Professional to enable Encrypting File System (EFS) on drive DCUse Windows NT workstation to configure NTFS permission on drive D to deny the users write  permissionDReinstall Windows NT workstation after configuring the disk code task

单选题You are configuring five computers for Windows NT Workstation 4.0 and Windows 2000 Professional. Each computer has an 8 GB hard disk. You configure the hard disk on each computer to have two 4 GB partitions.  Windows NT Workstation is installed on drive C and Windows 2000 Professional on drive D. In Windows 2000 Professional, you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart your computer and load Windows NT Workstation. You notice that users can save files to drive D.  You want to prevent users from saving the files to drive D in either operating system. You also want to ensure that users can access both drives while using either operating system.  What should you do?()AUse Windows 2000 Professional to configure drive D as a dynamic partitionBUse Windows 2000 Professional to enable encrypting file system on drive DCUse Windows NT workstation to configure NTFS permissions on drive D to deny the users  write permissionDReinstall Windows NT Workstation after configuring disk quotas

单选题You want to configure your Windows NT Workstation 4.0 computer Company1 to run both Windows NT Workstation and Windows 2000 Professional.  What should you do before installing Windows 2000 Professional on Company1? ()A Run Check Disk in Windows NT Workstation 4.0.B Disable disk compression in Windows NT Workstation 4.0.C Install Service Pack 4 or later for Windows NT Workstation 4.0.D Install the Distributed file system (Dfs) client in Windows NT Workstation 4.0.

单选题You are the administrator of a Windows 2000 network. You are configuring eight computers to use both Windows NT Workstation 4.0 and Windows 2000 Professional. Each computer has a 10 GB hard disk. You configure the hard disk on each computer to have two 5 GB partitions. Windows NT Workstation is installed on drive D. Windows 2000 Professional is installed on drive C. In Windows 2000 Professional, you configure a disk quota on drive C to prevent users from saving work files on the disk. You restart the computers and load Windows NT Workstation 4.0. You notice that users can still save files to drive C. You want to prevent users from saving files to drive C in either operating system. You also want to ensure that users can access both drives while using either operating system. What should you do on each computer? ()AReinstall Windows NT Workstation 4.0 after configuring the disk quotasBUse Windows 2000 Professional to configure drive C as a dynamic partitionCUse Windows 2000 Professional to enable Encrypting File System (EFS) on drive CDUse Windows NT Workstation 4.0 to configure NTFS permissions on drive C to deny the usersWrite permission

单选题You configure the hard disk on each computer to have two 4-GB partitions. Windows NT  Workstation is installed on driver C.  Windows 2000 Professional is installed on drive D.   In Windows 2000 Professional, you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart the computers and load Windows NT Workstation. You notice that users can still save files to drive D.   You want t prevent users from saving files to drive D in either operating system. You also want to ensure that users can access both drives while using either operating system.   What should you do on each computer?()AUse Windows 2000 Professional to configure drive D as a dynamic partitionBUse Windows 2000 Professional to enable Encrypting File System (EFS) on drive DCUse Windows NT Workstation to configure NTFS permissions on drive D to deny the users write permissionDReinstall Windows NT Workstation after configuring the disk quotas

单选题Your computers have both Windows NT Workstation 4.0, and Windows 2000 Professional operating systems. You configure the hard disk on each computer to have two 4-GB partitions. Windows NT Workstation is installed on drive C, and Windows 2000 Professional is installed on drive D. You configure a disk quota on drive D to prevent users from saving data on the disk.  How can you prevent users from saving files to drive D in either operating system?()AThe required result cannot be obtained with the above given solutionsBEnable EFS on DCFormat the NT 4 partition and reload NT 4DUse NT 4.0 NTFS permissions to deny users write access to D