单选题A technician is performing a memory upgrade by installing an additional 1GB stick of DDR RAM into a system. When the installation is complete, the computer shows 2GB of RAM at POST; however, it now indicates a lower speed setting for the memory. Which of the following is the MOST likely cause?（）AThe newly installed RAM has a lower clock speed than the existing RAM.BThe CPU is not configured to work with the additional RAM.CThe system is incompatible with the new RAM.DThe new RAM is of lower quality, and not dependable at higher speeds.
单选题
A technician is performing a memory upgrade by installing an additional 1GB stick of DDR RAM into a system. When the installation is complete, the computer shows 2GB of RAM at POST; however, it now indicates a lower speed setting for the memory. Which of the following is the MOST likely cause?（）
A
The newly installed RAM has a lower clock speed than the existing RAM.
B
The CPU is not configured to work with the additional RAM.
C
The system is incompatible with the new RAM.
D
The new RAM is of lower quality, and not dependable at higher speeds.
参考解析
解析：
暂无解析
相关考题：
Since RAM is only active when the computer is on, your computer uses disk to store information even when the computer is off. Which of the following is true?(74).A．When your computer is on, only RAM is used to store information.B．When your computer is on, only disk drives are used to store information.C．When your computer is off, only RAM is used to store information.D．When your computer is off, only disk drives are used to store information.
● Since RAM is only active when the computer is on, your computer uses disto store information even when the computer is off. Which of the following itrue? （74）（74）A．When your computer is on, only RAM is used to store informationB．When your computer is on, only disk drives are used to storinformation.C．When your computer is off, only RAM is used to store informationD．When your computer is off, only disk drives are used to storinformation.
A technician is replacing memory in a server whose motherboard supports PC2100 memory. This type of memory is also known as which of the following？（）A、DDR2B、DDRC、SDRAMD、DDR3
A technician needs to upgrade the memory in a laptop. Which of the following memory typeswould be the correct type?（）A、RIMMB、DDR RAMC、SDRAMD、SODIMM
A technician is performing a memory upgrade by installing an additional 1GB stick of DDR RAM into a system. When the installation is complete, the computer shows 2GB of RAM at POST; however, it now indicates a lower speed setting for the memory. Which of the following is the MOST likely cause?（）A、The newly installed RAM has a lower clock speed than the existing RAM.B、The CPU is not configured to work with the additional RAM.C、The system is incompatible with the new RAM.D、The new RAM is of lower quality, and not dependable at higher speeds.
A technician upgrades a computer from Windows XP Media Center Edition to Windows Vista Home Premium. After the upgrade Aero will not turn on. The system has a 2.4 GHz processor, 1GB of RAM, and a DirectX 7 video card. Which of the following will resolve this issue?（）A、Aero cannot be used on Windows Vista Home Premium.B、Upgrade the video card to a DirectX 9 compatible card.C、Upgrade the video driver.D、Upgrade the RAM to 4GB
An administrator is adding additional memory into a server that registers 1GB of memory in the OS and notices that the system has 2GB of memory physically installed； however， the server only shows 1GB of memory during POST. Which of the following is the MOST likely reason for this？（）A、 The OS does not support more than 1GB of memory.B、 The system memory has different manufacture dates.C、 Two of the memory sticks are defective.D、 The server is using memory interleaving.
A technician discovers that RAM modules are overheating. Which of following is best practice inthis situation?（）A、Install heatsinks on the RAM modules.B、Install additional CPU fans.C、Replace the RAM slots.D、Install a heatsink on the chipset driver
A technician has to populate a server motherboard with memory. The board has a memory bus speed of 800 MHz. Which of the following memory types should be used？（）A、DDR3B、SDRAMC、DDRD、DDR2
A customer has purchased a triple channel memory kit containing three DDR3 RAM modules. Theserver the RAM is intended for only has a dual channel capable motherboard. Which of the following is the BEST action to perform？（）A、Install only two modules as the RAM has to be installed in pairsB、Purchase one additional RAM module to make it even. Three modules will function as triplechannel and the additional module will be for parityC、Purchase dual channel memory. The triple channel memory may be incompatible with theserver motherboardD、Install the RAM.Two modules will perform as dual channel and one as single channel
A technician is dispatched to install additional RAM in a computer. The technician unplugs thesystem from the power source, and removes the cover of the PC. Which of the following shouldthe technician do NEXT?（）A、Update the BIOS for compatibility.B、Put on an ESD strap.C、Use an anti-static bag to hold the RAM while installing.D、Clean out the PC with compressed air.
A technician is installing new memory in a server. The technician would consult the HCL to ensure which of the following？（）A、Memory and virtual memory compatibilityB、Memory and speed compatibilityC、Memory and HDD compatibilityD、ESD standards were followed
The technician is repairing a PC which appears to have a failing RAM module. After replacing the module, the extra memory still is not registering. Which of the following is MOST likely the issue?（）A、Jumper settings are incorrectB、The RAM module is defectiveC、The memory slot is defectiveD、CMOS needs to be flashed
A technician is replacing memory in a server whose motherboard supports PC3-8500 memory. This type of memory is also known as which of the following？（）A、SDRAMB、DDRC、DDR3D、DDR2
A technician is installing a memory upgrade for a remote user. The technician notes that the machine is not reporting the correct amount of memory that was installed during the POST step. Which of the following actions should the technician perform FIRST?（）A、Replace the newly installed memory modules with another known-working unit.B、Remove and reseat the memory, and recheck the memory reported.C、Leave the configuration intact, and check cabling to ensure nothing was loose during the installation.D、Perform a BIOS upgrade on the machine.
An administrator has shut down a server to install additional memory. When the administrator restarts the server after the upgrade, it times out. Which of the following could be the cause of the problem?（）A、Processor failureB、Third party memoryC、Disk drive failureD、ESD during the upgradeE、Backplane failure
A technician is replacing memory in a server whose motherboard supports PC100 or PC133 memory. This type of memory is also known as which of the following？（）A、SDRAMB、RAMBUSC、DDR2D、DDR3
单选题A technician is performing a memory upgrade by installing an additional 1GB stick of DDR RAM into a system. When the installation is complete, the computer shows 2GB of RAM at POST; however, it now indicates a lower speed setting for the memory. Which of the following is the MOST likely cause?（）AThe newly installed RAM has a lower clock speed than the existing RAM.BThe CPU is not configured to work with the additional RAM.CThe system is incompatible with the new RAM.DThe new RAM is of lower quality, and not dependable at higher speeds.
单选题A customer has purchased a triple channel memory kit containing three DDR3 RAM modules. Theserver the RAM is intended for only has a dual channel capable motherboard. Which of the following is the BEST action to perform？（）AInstall only two modules as the RAM has to be installed in pairsBPurchase one additional RAM module to make it even. Three modules will function as triplechannel and the additional module will be for parityCPurchase dual channel memory. The triple channel memory may be incompatible with theserver motherboardDInstall the RAM.Two modules will perform as dual channel and one as single channel
单选题A technician is installing new memory in a server. The technician would consult the HCL to ensure which of the following？（）AMemory and virtual memory compatibilityBMemory and speed compatibilityCMemory and HDD compatibilityDESD standards were followed
单选题A technician is installing a memory upgrade for a remote user. The technician notes that the machine is not reporting the correct amount of memory that was installed during the POST step. Which of the following actions should the technician perform FIRST?（）AReplace the newly installed memory modules with another known-working unit.BRemove and reseat the memory, and recheck the memory reported.CLeave the configuration intact, and check cabling to ensure nothing was loose during the installation.DPerform a BIOS upgrade on the machine.
单选题A technician upgrades a computer from Windows XP Media Center Edition to Windows Vista Home Premium. After the upgrade Aero will not turn on. The system has a 2.4 GHz processor, 1GB of RAM, and a DirectX 7 video card. Which of the following will resolve this issue?（）AAero cannot be used on Windows Vista Home Premium.BUpgrade the video card to a DirectX 9 compatible card.CUpgrade the video driver.DUpgrade the RAM to 4GB
单选题A technician has to populate a server motherboard with memory. The board has a memory bus speed of 800 MHz. Which of the following memory types should be used？（）ADDR3BSDRAMCDDRDDDR2
多选题An administrator has shut down a server to install additional memory. When the administrator restarts the server after the upgrade， it times out. Which of the following could be the cause of the problem？（）AProcessor failureBThird party memoryCDisk drive failureDESD during the upgradeEBackplane failure
单选题A technician is dispatched to install additional RAM in a computer. The technician unplugs thesystem from the power source, and removes the cover of the PC. Which of the following shouldthe technician do NEXT?（）AUpdate the BIOS for compatibility.BPut on an ESD strap.CUse an anti-static bag to hold the RAM while installing.DClean out the PC with compressed air.
单选题The technician is repairing a PC which appears to have a failing RAM module. After replacing the module, the extra memory still is not registering. Which of the following is MOST likely the issue?（）AJumper settings are incorrectBThe RAM module is defectiveCThe memory slot is defectiveDCMOS needs to be flashed
单选题A technician discovers that RAM modules are overheating. Which of following is best practice inthis situation?（）AInstall heatsinks on the RAM modules.BInstall additional CPU fans.CReplace the RAM slots.DInstall a heatsink on the chipset driver
单选题An administrator is adding additional memory into a server that registers 1GB of memory in the OS and notices that the system has 2GB of memory physically installed; however, the server only shows 1GB of memory during POST. Which of the following is the MOST likely reason for this?（）AThe OS does not support more than 1GB of memory.BThe system memory has different manufacture dates.CTwo of the memory sticks are defective.DThe server is using memory interleaving.