单选题A technician is installing new memory in a server. The technician would consult the HCL to ensure which of the following？（）AMemory and virtual memory compatibilityBMemory and speed compatibilityCMemory and HDD compatibilityDESD standards were followed
单选题
A technician is installing new memory in a server. The technician would consult the HCL to ensure which of the following？（）
A
Memory and virtual memory compatibility
B
Memory and speed compatibility
C
Memory and HDD compatibility
D
ESD standards were followed
参考解析
解析：
暂无解析
相关考题：
A technician is installing a new power supply into a computer. One of the power supply connectors that the technician needs to connect to the motherboard is square and contains 4-pins. This connector is known as which of the following?（）A.SATAB.FDDC.IDED.ATX
A network technician is installing a new managed 10/100 Mbps switch on the network. The network has an older printer with a 10Mbps network adapter that will be moved to the new switch.Which of the following settings on the switch will need to be configured to support the printer?（）A. MAC filteringB. IP addressC. PoED. Port speed
A technician just finished installing a new printer on an end user’s computer. Which of thefollowing will enable the technician to see the test page option for the printer?（）A、Right-click on the printer and select PropertiesB、Double click on the printer iconC、Right-click on the printer and select Set as DefaultD、Right-click on the printer and select Open
The network technician is troubleshooting a network issue by implementing a new security device.After installing and configuring the device, which of the following steps should the technician takeNEXT?（）A、Verity full system functionalityB、Identify the main problem and question the userC、Document their findings, actions, and outcomesD、Escalate the issue to upper management
Before installing a new device， a technician checks to make sure the device is on the HCL. Which of the following is the advantage of having an HCL device？（）A、It is supported by other vendorsB、Increases performanceC、Decreases costD、Meets vendor standards
A technician is performing a memory upgrade by installing an additional 1GB stick of DDR RAM into a system. When the installation is complete, the computer shows 2GB of RAM at POST; however, it now indicates a lower speed setting for the memory. Which of the following is the MOST likely cause?（）A、The newly installed RAM has a lower clock speed than the existing RAM.B、The CPU is not configured to work with the additional RAM.C、The system is incompatible with the new RAM.D、The new RAM is of lower quality, and not dependable at higher speeds.
After a technician came out and installed a new wireless router, one of the wired workstations began having problems connecting to the file server. This is only an intermittent problem. Which of the following actions will the technician MOST likely perform to resolve this problem?（）A、Change the router's SSIDB、Move the router's locationC、Check user permissionsD、Check the cable ends
After installing a new SATA hard drive the technician notices the drive is hot to the touch and is giving off a slight odor. Which of the following should the technician do? （）A、Install a larger fan near the hard drive to cool the system.B、Clean the drive with compressed air and continue to use it.C、Remove and replace the drive.D、Apply more thermal compound and reseat the drive.
Mike, a technician, is installing a wireless router for a client. Which of the following is MOST important when installing a wireless router?（）A、LocationB、DCPAC、SSIDD、Number of client machines
A technician is installing a new power supply into a computer. One of the power supply connectors that the technician needs to connect to the motherboard is square and contains 4-pins. This connector is known as which of the following?（）A、SATAB、FDDC、IDED、ATX
A technician is installing new memory in a server. The technician would consult the HCL to ensure which of the following？（）A、Memory and virtual memory compatibilityB、Memory and speed compatibilityC、Memory and HDD compatibilityD、ESD standards were followed
An administrator is upgrading memory on the server. Once the server in turned back on， the administrator notices that the memory has not changed. The system board website says the board should accept the new amount of memory. Which of the following should the administrator do FIRST？（）A、 Replace memory chips with known good memory chips.B、 Reseat the memory chips.C、 Update the BIOS.D、 Upgrade the server OS.
The administrator has just installed a new memory module into the server. Now， the server is not showing the new memory. Which of the following should the administrator perform FIRST？（）A、System rebootB、Reseat the memoryC、Install the latest firmwareD、Install the latest driver
A technician is installing a basic router for a SOHO network. After installing the router the PCs connected to it are not able to acquire an IP address. Which of the following did the technician fail to configure correctly？（）A、DHCPB、DNSC、WINSD、NAT
A technician installed a new video card on a motherboard which has onboard video. When the monitor was plugged into the new card and the power was turned on, a no signal message appeared on the monitor. Which of the following is MOST likely the issue?（）A、In the BIOS, the onboard video adapter must be disabled.B、The video resolution is set too high.C、The LCD panel is defective.D、The drivers for the new video card must be installed before installing the card.
A technician has just completed a CPU upgrade on a motherboard. Which of the following will MOST likely cause the PC not to boot?（）A、The technician used generic thermal paste.B、The processor had pins broken during installation.C、The memory is incompatible with the new CPU.D、An incorrect fan size was installed on the heatsink.
A technician is installing a memory upgrade for a remote user. The technician notes that the machine is not reporting the correct amount of memory that was installed during the POST step. Which of the following actions should the technician perform FIRST?（）A、Replace the newly installed memory modules with another known-working unit.B、Remove and reseat the memory, and recheck the memory reported.C、Leave the configuration intact, and check cabling to ensure nothing was loose during the installation.D、Perform a BIOS upgrade on the machine.
单选题An administrator is upgrading memory on the server. Once the server in turned back on， the administrator notices that the memory has not changed. The system board website says the board should accept the new amount of memory. Which of the following should the administrator do FIRST？（）A Replace memory chips with known good memory chips.B Reseat the memory chips.C Update the BIOS.D Upgrade the server OS.
单选题A technician is performing a memory upgrade by installing an additional 1GB stick of DDR RAM into a system. When the installation is complete, the computer shows 2GB of RAM at POST; however, it now indicates a lower speed setting for the memory. Which of the following is the MOST likely cause?（）AThe newly installed RAM has a lower clock speed than the existing RAM.BThe CPU is not configured to work with the additional RAM.CThe system is incompatible with the new RAM.DThe new RAM is of lower quality, and not dependable at higher speeds.
单选题A technician has just finished installing a new NIC into a customer’s desktop. Which of thefollowing should the technician do NEXT?（）APerform a full system backup.BFollow up with the customer, verifying satisfaction.CAsk their manager to contact the customer.DPerform a complimentary virus scan.
单选题An administrator wants to rackmount a new server. Power and network outlets are available and cooling in the room is adequate to support the additional server. The new server is identical to the other servers already installed. Which of the following items should the administrator FIRST verify before installing the server？（）AHBA is compatible with the SAN fiber switch.BUpdate the newly installed server with the latest KVM drivers.CThe UPS will continue to perform as expected with the additional load.DVerify the server NIC is compatible with the NAS.
单选题You work as the IT professional in an international company which is named Wiikigo. You are experiencedin implementing and administering a network operating system. You are specialized in deploying servers，configuring Windows Server 2008 Terminal services and network application services，and configuring aweb services infrastructure. You are in charge of a server that runs Windows Server 2008. The TerminalServices server role is installed on the server. A Terminal Services application runs on the server. Now youreceive report from users saying that that the application stops responding. You monitor the memory usageon the server for a week and find that the application has a memory leak. A patch is not currently available.You create a new resource-allocation policy in Microsoft Windows System Resource Manager （WSRM）.You configure a Process Matching Criteria named TrackShip and choose the application. You have toterminate the application when the application consumes more than half of the available memory on theserver. What action should you perform？（）AThe resource-allocation policy and the maximum working set limit option should be set to half the available memory on the server. The new policy should be set as a Managing Policy.BThe resource-allocation policy and the maximum committed memory option should be set to half the available memory on the server. The new policy should be set as a Profiling Policy.CThe resource-allocation policy and the maximum committed memory option should be set to half the available memory on the server. The new policy should be set as a Managing Policy.DThe resource-allocation policy should be configured and the maximum working set limit option should be set to half the available memory on the server. The new policy should be set as a Profiling Policy.
单选题An administrator is upgrading memory on the server. Once the server in turned back on, the administrator notices that the memory has not changed. The system board website says the board should accept the new amount of memory.Which of the following should the administrator do FIRST?（）AReplace memory chips with known good memory chips.BReseat the memory chips.CUpdate the BIOS.DUpgrade the server OS
单选题A network technician is installing a new managed 10/100 Mbps switch on the network. The network has an older printer with a 10Mbps network adapter that will be moved to the new switch. Which of the following settings on the switch will need to be configured to support the printer?（）AMAC filteringBIP addressCPoEDPort speed
单选题After installing a new video card, the computer loads Windows and continuously reboots. Which of the following would be the FIRST step that a technician should take?（）ARun CHKDSKBBoot to ERDCRun MSCONFIGDGo into Safe Mode
单选题Terminal Services application runs on the server. Users report that the application stops responding. You monitor the memory usage on the server for a week. You discover that the application has a memory leak. A patch is not currently available. You create a new resource-allocation policy in Microsoft Windows Server Resource Manager. You configure a Process Matching Criteria named TrackShip and select the application. You need to terminate the application when the application consumes more than half of the available memory on the server. What should you do？（）AConfigure the resource-allocation policy and set the maximum working set limit option to half the available memory on the server. Set the new policy as a Profiling Policy.BConfigure the resource-allocation policy and set the maximum working set limit option to half the available memory on the server. Set the new policy as a Managing Policy.CConfigure the resource-allocation policy and set the maximum committed memory option to half the available memory on the server. Set the new policy as a Profiling Policy.DConfigure the resource-allocation policy and set the maximum committed memory option to half the available memory on the server. Set the new policy as a Managing Policy.
单选题A technician has just completed a CPU upgrade on a motherboard. Which of the following will MOST likely cause the PC not to boot?（）AThe technician used generic thermal paste.BThe processor had pins broken during installation.CThe memory is incompatible with the new CPU.DAn incorrect fan size was installed on the heatsink.