A technician is performing a memory upgrade by installing an additional 1GB stick of DDR RAM into a system. When the installation is complete, the computer shows 2GB of RAM at POST; however, it now indicates a lower speed setting for the memory. Which of the following is the MOST likely cause?（）A、The newly installed RAM has a lower clock speed than the existing RAM.B、The CPU is not configured to work with the additional RAM.C、The system is incompatible with the new RAM.D、The new RAM is of lower quality, and not dependable at higher speeds.
A technician is performing a memory upgrade by installing an additional 1GB stick of DDR RAM into a system. When the installation is complete, the computer shows 2GB of RAM at POST; however, it now indicates a lower speed setting for the memory. Which of the following is the MOST likely cause?（）
- A、The newly installed RAM has a lower clock speed than the existing RAM.
- B、The CPU is not configured to work with the additional RAM.
- C、The system is incompatible with the new RAM.
- D、The new RAM is of lower quality, and not dependable at higher speeds.
相关考题：
A technician needs to manage a switch by using the management port on the back of the switch.Which of the following cables would the technician use?（）A、StraightB、ConsoleC、CrossoverD、Loopback
A technician plugs a USB device into the front panel of a desktop computer and nothing happens.The technician knows that plug-n-play is enabled. Which of the following BEST describes a possible cause to this issue?（）A、The technician plugged a USB 2.0 device into a USB 1.1 port.B、The technician needs to reboot the computer for the device to work.C、The technician plugged a USB 1.1 device into a USB 2.0 port.D、The front panel connectors are not plugged into the motherboard.
Which of the following reasons indicate why it is important to have the user demonstrate the task they are trying to perform?（）A、To help the technician learn how to perform the task B、To determine if the user is performing the task properly C、To determine if the user is authorized to perform the task D、To help the technician determine if there is a better way to perform the task in question
Which of the following safety procedures is the BEST when lifting heavy equipment onto a repairbench?（）A、The technician should always bend at the waist and lift with their arms.B、The technician should seek assistance from an available customer.C、The technician should always bend at the waist and lift with their back.D、The technician should get assistance from another technician.
A technician is troubleshooting a WLAN card in a laptop. The wireless infrastructure is 802.11g. TheWLAN card is showing connected at 11Mbps. Which of the following would be the BEST reason why theWLAN card is performing at that speed? （）A、The WLAN card is 802.11g.B、The WLAN card is 802.11b.C、The WLAN card is 802.11n.D、The WLAN card is 802.11a.
A technician is performing preventive maintenance on the hardware components in a workstation. Which of the following actions should the technician take？ （）A、Remove the case front and clean the air vents.B、Unplug the capacitors from the board and clean the contacts.C、Remove the processor and clean the pins with an eraser.D、Remove the processor and clean any dust that has collected between the processor and the heatsink.
A technician installed a new application on a Windows XP desktop. When the technician tries to launch the application it crashes. Which of the following can the technician use to troubleshoot the application?（）A、System logsB、Security logsC、Application logsD、Application installation logs
A technician installed a new application on a Windows XP desktop. After the application wasinstalled, the technician rebooted the desktop and received a bluescreen error. Which of thefollowing steps should the technician perform?（） (Select TWO).A、Boot into Safe ModeB、Replace the motherboardC、Uninstall the applicationD、Replace the hard driveE、Install more RAM
A technician needs to find an end of a network cable drop. Which of the following tools would the technician use?（）A、Cable testerB、MultimeterC、Toner probeD、Loopback plug
A customer calls in, talking constantly without allowing time for the technician to answer or ask questions. The technician decides to place the customer on hold to work on another issue and misses what the customer’s problem was. When the customer is finished explaining the issue, the technician asks the customer to summarize the problem again, which angers the customer. How could the technician have better handled the situation to avoid such a confrontation?（）A、The technician should have asked the customer to slow down and allow for a response to a few of the matters brought up in discussion.B、The technician should have allowed the customer to finish completely, and then return to the customer’s first point to build a structured discussion.C、The technician should have transferred the call to a supervisor, as the supervisor is better trained to handle such customers.D、The technician should have only asked closed-ended questions so the customer could not elaborate on the issues and the technician could troubleshoot the issue.
A technician is troubleshooting a lack of Internet connectivity affecting their entire office. The technician suspects the issue is with their Internet Service Provider failing to provide service.Which of the following command line tools should the technician use to BEST test this theory？（）A、tracertB、ipconfigC、netstatD、nslookup
The technician notices that one of the wires in a CAT5 cable is cut in half. Which of the followingconnectivity issues did the technician discover?（）A、Open pairsB、AttenuationC、CrosstalkD、Interference
While performing a preventative maintenance check on a personal computer, a technician notices thatseveralunused expansion card slots have open ports. Which of the following BEST describes why the covers for these card slots should be reinstalled?（）A、Help limit radio frequency interference (RFI) inside the case.B、Help ensure proper air flow through the case.C、Help prevent moisture buildup in the case.D、Help limit electrostatic discharge (ESD) inside the case.
The size of the largest datafile， data1.dbf， in your database is 30MB. You issued the following command： RMANCONFIGURE MAXSETSIZE 10MB； What will be the impact of the above setting？（）A、 While performing the backup of the datafile，data1.dbf，one backup set is created.B、 While performing the backup of the datafile，data1.dbf，two backup sets are created.C、 While performing the backup of the datafile，data1.dbf，three backup sets are created.D、 While performing the backup of the datafile，data1.dbf，the command for performing a backup of the datafile，data1.dbf，will fail.
You are performing a database recovery because a user’s schema is dropped. While performing the recovery， you use the UNTIL SEQUENCE clause. Which type of database recovery are you performing？（）A、 user managed complete recoveryB、 user managed incomplete recoveryC、 RMAN-based complete recoveryD、 RMAN-based incomplete recovery
多选题A technician installed a new application on a Windows XP desktop. After the application wasinstalled, the technician rebooted the desktop and received a bluescreen error. Which of thefollowing steps should the technician perform?（） (Select TWO).ABoot into Safe ModeBReplace the motherboardCUninstall the applicationDReplace the hard driveEInstall more RAM
单选题A technician plugs a USB device into the front panel of a desktop computer and nothing happens.The technician knows that plug-n-play is enabled. Which of the following BEST describes a possible cause to this issue?（）AThe technician plugged a USB 2.0 device into a USB 1.1 port.BThe technician needs to reboot the computer for the device to work.CThe technician plugged a USB 1.1 device into a USB 2.0 port.DThe front panel connectors are not plugged into the motherboard.
单选题The size of the largest datafile， data1.dbf， in your database is 30MB. You issued the following command： RMANCONFIGURE MAXSETSIZE 10MB； What will be the impact of the above setting？（）A While performing the backup of the datafile，data1.dbf，one backup set is created.B While performing the backup of the datafile，data1.dbf，two backup sets are created.C While performing the backup of the datafile，data1.dbf，three backup sets are created.D While performing the backup of the datafile，data1.dbf，the command for performing a backup of the datafile，data1.dbf，will fail.
单选题You are performing a database recovery because a user’s schema is dropped. While performing the recovery， you use the UNTIL SEQUENCE clause. Which type of database recovery are you performing？（）A user managed complete recoveryB user managed incomplete recoveryC RMAN-based complete recoveryD RMAN-based incomplete recovery
单选题A user is present when a technician is troubleshooting their workstation. They insist on showing the technician, step by step, what occurred. How should the technician deal with this situation? （）AAllow the user to demonstrate expertise.BDo not argue; empathize with the user, and offer to help.CAsk the user to watch as the technician diagnoses and corrects the problem.DDocument each of the steps to replicate at a later time.
单选题A technician is performing a memory upgrade by installing an additional 1GB stick of DDR RAM into a system. When the installation is complete, the computer shows 2GB of RAM at POST; however, it now indicates a lower speed setting for the memory. Which of the following is the MOST likely cause?（）AThe newly installed RAM has a lower clock speed than the existing RAM.BThe CPU is not configured to work with the additional RAM.CThe system is incompatible with the new RAM.DThe new RAM is of lower quality, and not dependable at higher speeds.
单选题Which of the following safety procedures is the BEST when lifting heavy equipment onto a repairbench?（）AThe technician should always bend at the waist and lift with their arms.BThe technician should seek assistance from an available customer.CThe technician should always bend at the waist and lift with their back.DThe technician should get assistance from another technician.
单选题After a technician installs a video card, which of the following should the technician configure NEXT?（）AResolutionBColorsCDots per inchDRefresh rate
单选题Which of the following reasons indicate why it is important to have the user demonstrate the task they are trying to perform?（）ATo help the technician learn how to perform the task BTo determine if the user is performing the task properly CTo determine if the user is authorized to perform the task DTo help the technician determine if there is a better way to perform the task in question
单选题A technician is performing scheduled preventive maintenance on a laser printer. Which of the following should the technician clean or replace？ （）AfuserBozone filterCtransfer coronaDprimary corona
单选题A technician is troubleshooting a WLAN card in a laptop. The wireless infrastructure is 802.11g. TheWLAN card is showing connected at 11Mbps. Which of the following would be the BEST reason why theWLAN card is performing at that speed? （）AThe WLAN card is 802.11g.BThe WLAN card is 802.11b.CThe WLAN card is 802.11n.DThe WLAN card is 802.11a.
单选题In which situation would you use the Oracle Shared Server configuration？（）Awhen performing export and import using Oracle Data PumpBwhen performing backup and recovery operations using Oracle Recovery ManagerCwhen performing batch processing and bulk loading operation in a data warehouse environment Din an online transaction processing （OLTP） system where large number of client sessions are idle most of the time