单选题A router has been configured with the settings shown below: [edit] user@host# show system authentication-order authentication-order [ radius tacplus ]; The router also has a local database that contains the user lab with password lab123. What would happen if both the RADIUS and the TACACS servers are not accessible?（）AThe user lab will not be able to login.BThe user lab will be authenticated against the local database and will be able to login.CThe user lab will receive an error message indicating the router is unable to authenticate due to the authentication servers not responding.DThe user will be able to login only if tries to login as the root user.
单选题
A router has been configured with the settings shown below: [edit] user@host# show system authentication-order authentication-order [ radius tacplus ]; The router also has a local database that contains the user lab with password lab123. What would happen if both the RADIUS and the TACACS servers are not accessible?（）
A
The user lab will not be able to login.
B
The user lab will be authenticated against the local database and will be able to login.
C
The user lab will receive an error message indicating the router is unable to authenticate due to the authentication servers not responding.
D
The user will be able to login only if tries to login as the root user.
参考解析
解析：
暂无解析
相关考题：
A router has been configured with the settings shown below:[edit]user@host show system authentication-order authentication-order [ radius tacplus ];The router also has a local database that contains the user lab with password lab123. What would happen if both the RADIUS and the TACACS servers are not accessible?（）A.The user lab will not be able to login.B.The user lab will be authenticated against the local database and will be able to login.C.The user lab will receive an error message indicating the router is unable to authenticate due to the authentication servers not responding.D.The user will be able to login only if tries to login as the root user.
How can a Ezonexam administrator determine if a router has been configured when it is first powered up?A．A configured router prompts for a passwordB．A configured router goes to the privileged mode promptC．An un configured router goes into the setup dialogD．An un configured router goes to the enable mode prompt
Router R1 is configured as shown below:router eigrp 100network 10.0.0.0eigrp stubBased on the information shown above, which two types of routes will be advertised?() A. Receive - onlyB. StubC. StaticD. SummaryE. ConnectedF. Dynamic
A company has a small network,consisting of a single switch and a single router.The switch has been configured with two vlans,and route-on-a-stick is being configured on the router for inter-vlan routing.A trunk is configured to connect the switch to the router.What is the minimum number of router subinterfaces that are required for all the vlans to communicate?（）A. oneB. threeC. twoD. zero
Refer to the exhibit. Switch port FastEthernet 0/24 on AlSwitch1 will be used to create an IEEE 802.1Q- complaint trunk to another switch. Based on the output shown, What is the reason the trunk does not form, even thought the proper cabling has been attached?（）A.VLANs have not been created yetB.An IP address must be configured for the portC.The port is currently configured for access modeD.The correct encapsulation type has not been configuredE.The no shutdown command has not been entered for the port
What is the most likely reason that an IBGP route that has been selected as a best route is not entered into the IP routing table?（）A、Route reflectors are not passing updates properly.B、BGP synchronization has been enabled.C、The next-hop address is unreachable.D、No loopback interface has been configured on a router.
Refer to the exhibit. Which statement is correct based on the show login command output shown？（）A、When the router goes into quiet mode， any host is permitted to access the router via Telnet，SSH， and HTTP，since the quiet-mode access list has not been configured.B、The login block-for command is configured to block login hosts for 93 seconds.C、All logins from any sources are blocked for another 193 seconds.D、Three or more login requests have failed within the last 100 seconds.
A switch has been configured with two vlans and is connected to a router with a trunk for inter-vlan routing.OSPF has been configured on the router，as the routing protocol for the network.Which statement about thisnetwork is true？（）A、For the two vlans to communicate，a network statement for the trunk interface needs to be added to the OSPF configuration.B、For the two vlans to communicate， a network statement for each subinterface needs to be added to the OSPF configuration.C、Direct inter-vlan communication does not require OSPFD、OSPF cannot be used if router-on-a-stick is configured on the router
The Frame Relay network in the diagram is not functioning properly. What is the cause of the problem?（）A、The Gallant router has the wrong LMI type configuredB、Inverse ARP is providing the wrong PVC information to the Gallant routerC、The S3 interface of the Steele router has been configured with the frame-relay encapsulation ietf commandD、The frame-relay map statement in the Attalla router for the PVC to Steele is not correctE、The IP address on the serial interface of the Attalla router is configured incorrectly
How can an administrator determine if a router has been configured when it is first powered up?（）A、A configured router prompts for a passwordB、A configured router goes to the privileged mode promptC、An un configured router goes into the setup dialogD、An un configured router goes to the enable mode prompt
Router R-1 is configured for BGP routing as shown below： router bgp 65300network 27.0.0.0neighbor 192.23.1.1 remote-as 65300 From the perspective of router R-1， what kind of router is the router with IP address 192.23.1.1？（）A、A peer router running IBGPB、A peer router running EBGPC、A community member running IBGPD、A peer group member running IBGPE、A peer group member running EBGP
HSRP has been configured between two Company devices. What kind of message does an HSRP configured router send out every 3 seconds？（）A、 RetireB、 CoupC、 ResignD、 SendE、 Hello
A network administrator is trying to add a new router into an established OSPF network.The networks attached to the new router do not appear in the routing tables of the other OSPF routers.Given the information in the partial configuration shown below,what configuration error is causing this problem? （）Router(config)#router ospf 1Router(config-router)#network 10.0.0.0 255.0.0.0 area 0A、The process id is configured improperlyB、The OSPF area is configured improperlyC、The network wildcard mask is configured improperlyD、The network number is configured improperlyE、The AS is configured improperlyF、The network subnet mask is configuerd improperly
Router R1 exists in an Enterprise that uses EIGRP as its routing protocol. The show ip route command output on router R1 lists the following phrase: "Gateway of last resort is 1.1.1.1 to network 2.0.0.0". Whic h of the following is most likely to have caused this output to occur on R1?（）A、R1 has been configured with an ip default- network 2.0.0.0 command.B、R1 has been configured with an ip route 0.0.0.0 0.0.0.0 1.1.1.1 command.C、R1 has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.D、Another router has been configured with an ip default - network 2.0.0.0 command.E、Another router has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.
Router R1 is configured as shown below: router eigrp 100 network 10.0.0.0 eigrp stub Based on the information shown above, which two types of routes will be advertised？（）A、Receive - onlyB、StubC、StaticD、SummaryE、ConnectedF、Dynamic
A company has a small network,consisting of a single switch and a single router.The switch has been configured with two vlans,and route-on-a-stick is being configured on the router for inter-vlan routing.A trunk is configured to connect the switch to the router.What is the minimum number of router subinterfaces that are required for all the vlans to communicate?（）A、oneB、threeC、twoD、zero
单选题Refer to the exhibit. Which statement is correct based on the show login command output shown？（）AWhen the router goes into quiet mode， any host is permitted to access the router via Telnet，SSH， and HTTP，since the quiet-mode access list has not been configured.BThe login block-for command is configured to block login hosts for 93 seconds.CAll logins from any sources are blocked for another 193 seconds.DThree or more login requests have failed within the last 100 seconds.
单选题The Frame Relay network in the diagram is not functioning properly. What is the cause of the problem?（）AThe Gallant router has the wrong LMI type configuredBInverse ARP is providing the wrong PVC information to the Gallant routerCThe S3 interface of the Steele router has been configured with the frame-relay encapsulation ietf commandDThe frame-relay map statement in the Attalla router for the PVC to Steele is not correctEThe IP address on the serial interface of the Attalla router is configured incorrectly
单选题HSRP has been configured between two Company devices. What kind of message does an HSRP configured router send out every 3 seconds？（）A RetireB CoupC ResignD SendE Hello
单选题A Cisco router has been configured, and the copy running-config startup-config command has been issued. When the router is power cycled, the router prompts with: "Would you like to enter the initial configuration dialog? [yes/no]" Why has this occurred?（）AThere is an error in the router DRAM.BTe IOS image is corrupt.CThe configuration register is set to 0x2142.DThe TFTP server that contains the router configuration file is unreachable.EA boot system configuration command has placed the router into setup mode.
单选题How can an administrator determine if a router has been configured when it is first powered up?（）AA configured router prompts for a passwordBA configured router goes to the privileged mode promptCAn un configured router goes into the setup dialogDAn un configured router goes to the enable mode prompt
多选题Router R1 is configured as shown below: router eigrp 100 network 10.0.0.0 eigrp stub Based on the information shown above, which two types of routes will be advertised？（）AReceive - onlyBStubCStaticDSummaryEConnectedFDynamic
单选题A network administrator is trying to add a new router into an established OSPF network.The networks attached to the new router do not appear in the routing tables of the other OSPF routers.Given the information in the partial configuration shown below,what configuration error is causing this problem?（） Router(config)#router ospf 1 Router(config-router)#network 10.0.0.0 255.0.0.0 area 0AThe process id is configured improperlyBThe OSPF area is configured improperlyCThe network wildcard mask is configured improperlyDThe network number is configured improperlyEThe AS is configured improperlyFThe network subnet mask is configuerd improperly
单选题A router has been configured with the authentication order settings shown below: [edit] user@host# show system authentication-order authentication-order [radius tacplus password]; The router also has a local database that contains the user lab with password lab123. What would happen if both the RADIUS and the TACACS servers respond with a reject for user lab?（）AThe user lab will not be able to login.BThe user lab will be authenticated against the local database and will be able to login.CThe user will be able to login only if tries to login as the root user.DThe user lab will receive an error message indicating the username and password provided could not be found on the radius and tacacs servers.
单选题Router R-1 is configured for BGP routing as shown below： router bgp 65300network 27.0.0.0neighbor 192.23.1.1 remote-as 65300 From the perspective of router R-1， what kind of router is the router with IP address 192.23.1.1？（）AA peer router running IBGPBA peer router running EBGPCA community member running IBGPDA peer group member running IBGPEA peer group member running EBGP
单选题A switch has been configured with two vlans and is connected to a router with a trunk for inter-vlan routing.OSPF has been configured on the router，as the routing protocol for the network.Which statement about thisnetwork is true？（）AFor the two vlans to communicate，a network statement for the trunk interface needs to be added to the OSPF configuration.BFor the two vlans to communicate， a network statement for each subinterface needs to be added to the OSPF configuration.CDirect inter-vlan communication does not require OSPFDOSPF cannot be used if router-on-a-stick is configured on the router
单选题What is the most likely reason that an IBGP route that has been selected as a best route is not entered into the IP routing table?（）ARoute reflectors are not passing updates properly.BBGP synchronization has been enabled.CThe next-hop address is unreachable.DNo loopback interface has been configured on a router.